Uma nova possibilidade para o tratamento da Agenesia dental: Relato de um caso clínico / A new possibility for the treatment of agenesia dental: report of a clinical case

Objetivo: relatar um caso clínico em que a paciente buscava um tratamento não invasivo para reabilitação estética anterior em um quadro de presença de agenesia, dente conoide e restaurações insatisfatórias. Relato de caso: a paciente B.M.S., de 19 anos, procurou uma clínica particular em Belo Horizonte, insatisfeita com seus dentes anteriores, em função de uma agenesia do dente 22, restabelecida através de uma ponte adesiva de coloração mais escura, restauração de resina composta manchada no dente 12, que é conoide, e manchamento das restaurações em resina composta dos dentes 11, 13 e 21. Para o planejamento, considerou-se que a paciente não queria se submeter a procedimentos cirúrgicos, como implantes dentários. O tratamento proposto foi a confecção de seis restaurações cerâmicas, associando lâminas ultrafinas de 0,5 mm a uma ponte adesiva. A estética do sorriso foi restabelecida de acordo com as expectativas da paciente e dos profissionais envolvidos. Considerações finais: o tratamento foi considerado uma possibilidade real e conservadora, já que foram realizados preparos minimamente invasivos e a paciente não foi submetida à instalação de implantes. A ponte adesiva associada aos laminados cerâmicos foi extremamente satisfatória em relação ao restabelecimento da estética e da função do sorriso da paciente.(AU)

Objective: to report a case in which a patient sought noninvasive treatment for anterior aesthetic rehabilitation in the presence of agenesis, controlled tooth and unsatisfactory restoration. Case report: a 19-year-old BMS patient sought a specific clinic in Belo Horizonte, with anterior tooth problems, on a function of tooth agenesis 22, restored a darker-colored adhesive bridge, isolated resin restoration on tooth 12, which is tested and found in composite resin restorations of teeth 11, 13 and 21. For the planning considered, the patient did not want to undergo surgical procedures such as dental implants. The proposed treatment was the fabrication of six ceramic restorations, associating ultra-thin 0.5 mm blades with an adhesive bridge. The aesthetics of the smile were restored according to the expectations of the patient and the professionals involved. Final considerations: the treatment was considered a real and conservative possibility, since minimally invasive preparations were performed and one patient was not submitted to implant placement. The adhesive bridge associated with ceramic laminates was extremely satisfactory regarding the restoration of the aesthetics and smile function of the patient.(AU)

In Vivo Biological Effects of Marine Biosilica on a Tibial Bone Defect in Rats

Abstract Research on biomaterials of natural origin has gained prominence in the literature. Above all, marine sponges, due to their architecture and structural components, present a promising potential for the engineering of bone tissue. In vitro studies demonstrate that a biosilica of marine sponges has osteogenic potential. However, in vivo works are needed to elucidate the interaction of biosilica (BS) and bone tissue. The objective of the study was to evaluate the morphological and chemical characteristics of BS compared to Bioglass (BG) by scanning electron microscopy (SEM) and X-ray dispersive energy (EDX) spectroscopy. In addition, to evaluate the biological effects of BS, through an experimental model of tibial bone defect using histopathological, histomorphometric, immunohistochemical (IHC) and mechanical tests. SEM and EDX demonstrated the successful extraction of BS. Histopathological analysis demonstrated that Control Group (GC) had greater formation of newly formed bone tissue compared to BG and BS, yet BG bone neoformation was greater than BS. However, BS showed material degradation and granulation tissue formation, with absence of inflammatory process and formation of fibrotic capsule. The results of histomorphometry corroborate with those of histopathology, where it is worth emphasizing the positive influence of BS in osteoblastic activity. IHQ demonstrated positive VEGF and TGF-β immunoexpression for GC, BS and BG. In the mechanical test no significant differences were found. The present results demonstrate the potential of BS in bone repair, further studies are needed other forms of presentation of BS are needed.

Microfiltración apical entre dos cementos de obturación: biocerámico y resinoso en premolares unirradiculares preparadas con protaper, y obturadas con condensación lateral / Apical microfiltration between two filling cements: bioceramic and resinous in unirradicular premolars prepared with protaper and sealed with lateral condensation

Resumen Objetivo: Comparar in vitro la microfiltración apical en premolares unirradiculares obturados con cemento a base de resina epóxica y cemento biocerámico. Método: 40 piezas dentales unirradiculares fueron seleccionadas y divididas en dos grupos para ser obturadas esperando el tiempo de fraguado de acuerdo con las instrucciones del fabricante. El grupo A se obturó con cemento biocerámico Endosequence y, el grupo B, con cemento a base de resina epóxica AH-Plus: posteriormente los dos grupos fueron sellados con barniz de uñas hasta 3mm de la parte apical, luego se colocaron las muestras en la incubadora a 37ºC. Ambos fueron sometidos a 750 ciclos de termociclado, para reproducir el ambiente parecido a la cavidad oral. Para análisis de microfiltración se utilizó el método de difusión del colorante, se sumergieron en azul de metileno al 2 % por 6 días, posteriormente los especímenes fueron sometidos en una bomba de vacío. Los dientes fueron cortados longitudinalmente para ser evaluadas mediante el estereomicroscopio. El análisis estadístico fue hecho mediante T-Student y Chi-Cuadrado. Resultados: El grupo A corresponde a Endosequence obtuvo una medida de 0,55mm y el grupo B corresponde a AH-Plus 1,20mm con un estimado de significancia de p=0,013. Conclusión: El análisis de ambos cementos de obturación demostró que Endosequence posee menor microfiltración apical que AH-Plus.

Abstract Aim: To compare in vitro by the stereomiscroscope the lesser apical microfiltration in uniradicular premolars, between the cement based on Epoxy Resin and Bioceramic cement. Method: The study was performed on 40 uniradicular dental pieces divided into two groups, the samples were prepared using the protaper system and the obturation was performed using the lateral condensation technique, the first group was sealed withEndosequence bioceramic cement and the second group with Cement based on AH-Plus epoxy resin, then sealed with nail varnish up to 3mm from the apical part, then the samples were placed in the incubator at 37ºC, waiting for the set time corresponding to each group according to the manufacturer's instructions . The two groups of the present study were submitted to 750 cycles of thermocycling, to provide an environment similar to the oral cavity, then longitudinal cuts were made to the samples. The microfiltration was evaluated using the dye diffusion method, immersed in 2% methylene blue for 6 days, then the specimens were subjected to a vacuum pump. The teeth were cut longitudinally to be evaluated by the stereomicroscope. The statistical analysis was through T-Student and Chi-Square. Results: Group A corresponds to Endosequence obtained a mean of 0,55mm and Group B corresponds to AH-Plus 1,20mm with an estimated significance of p = 0,013. Conclusion: Both obturation cements have significant differences, therefore Endosequence has less apical microfiltration than AHPlus.

Restorative Rehabilitation of a Patient with Generalized Non-Carious Cervical Lesions: Case Report / Rehabilitación restaurativa de un paciente con lesiones cervicales no-cariosas generalizadas: Reporte de un caso

ABSTRACT Non-Carious Cervical Lesions (NCCL) are a current problem of multifactorial origin that is associated with the loss of vertical occlusal dimension, hypersensitivity, loss of teeth, fractures, and many other pathologies that affect the masticatory function of the oral cavity. Identification of the etiological factors of NCCL comprises a key piece for the solution of the problem. Based on clinical scientific evidence related with the diagnosis, a restorative treatment must be planned according to the loss of dental structure in order to return function and aesthetics. The purpose of this case report was to describe a 54-year-old male patient who was diagnosed with generalized NCCL combined with occlusal vertical dimension loss. The protocol of the treatment process is described.

RESUMEN Las lesiones cervicales no cariosas (LCNC) son una problemática actual de origen multifactorial, la cual se ve asociada a la pérdida de dimensión vertical oclusal, hipersensibilidad, pérdida de dientes, fracturas y muchas otras patologías que afectan la función masticatoria de la cavidad bucal. La identificación de los factores etiológicos de las LCNC son piezas claves para la solución del problema. Basados en la evidencia científica clínica relacionado con el diagnóstico, se debe planificar un plan de tratamiento restaurativo que depende de la pérdida de la estructura dentaria para devolver la función y estética. El objetivo de este reporte de caso es describir a un paciente masculino de 54 años a quien se le diagnosticó LCNC generalizadas combinado con una pérdida de dimensión vertical oclusal. El protocolo de plan de tratamiento es descrito paso a paso.

The contribution of ceramic thickness and adhesive type on the de-bonding strength of dental ceramic veneers using Er, Cr: YSGG laser / La contribución del espesor de la cerámica y el tipo de adhesivo a la resistencia de desunión de las carillas dentales de cerámica con láser Er, Cr: YSGG

Purpose: De-bonding strength of ceramic veneers by laser use needs to be evaluated in detail. The aim of this study, is to determine the contribution of ceramic thickness and cementing agents to the de-bonding strength of ceramic veneers using Er,Cr:YSGG laser. Methods: A total of 120 maxillary central incisors specimens were randomly divided into twelve groups on the basis of disc thickness, cementing agent, and Er,Cr:YSGG laser use. Under laboratory conditions, 120 IPS Empress II system discs 0.5mm, 1mm, and 2mm in thickness were applied to the tooth surfaces, for laser use. An Er,Cr:YSGG laser system was applied to the central surface of the IPS Empress II discs on specimens in all laser groups (Groups 1,3,5,7,9,11). Then the shear bond strength (SBS) for all specimens were tested with a testing machine at a speed of 0.5mm/min. The SBS values were considered as the de-bonding strength. Results: The mean de-bonding strength values for Groups 9 and 11 (0,5 mm disc thickness + laser application) have the lowest median load (0.000 N), while Group 4 (2mm disc thickness + no laser) has the highest median load (573.885 N). The de-bonding strengths of all the groups without laser application were higher than those of all groups with laser use. When laser is applied, the mean de-bonding strength decreases with decreasing disc thickness, and it reaches zero at 0.5mm thickness of discs cemented by self- or total-etch adhesives. Conclusions: The de-bonding strength decreases with laser use, and decreasing disc thickness. In the absence of laser, the mean de-bonding values of discs cemented by a total etch adhesive system are always higher than those of discs cemented with a self-etch adhesive system. Without any extra load, all 0.5mm thick discs were dislodged from teeth while applying or testing the laser.

Propósito: La resistencia de desunión de las carillas de cerámica mediante el uso del láser debe evaluarse en detalle. El objetivo de este estudio es determinar la contribución del espesor de la cerámica y los agentes de cementación a la resistencia de desunión de las carillas de cerámica utilizando el láser Er, Cr: YSGG. Métodos: Un total de 120 incisivos centrales maxilares se dividieron al azar en doce grupos según el grosor del disco, el agente de cementación y el uso del láser Er, Cr: YSGG. En condiciones de laboratorio, se aplicaron en las superficies de los dientes 120 discos del sistema IPS Empress II de 0,5mm, 1mm y 2mm de grosor, para uso con láser. Se aplicó un sistema láser Er, Cr: YSGG a la superficie central de los discos IPS Empress II en muestras de todos los grupos de láser (Grupos 1,3,5,7,9,11). Luego, la resistencia de la unión al cizallamiento (SBS) para todas las muestras se probó con una máquina de prueba a una velocidad de 0.5mm/min. Los valores de SBS se consideraron como la fuerza de desunión. Resultados: Los valores medios de resistencia de desunión para los Grupos 9 y 11 (espesor de disco de 0,5mm + aplicación de láser) demostró la carga media más baja (0,000 N), mientras que el Grupo 4 (espesor de disco de 2 mm + sin láser) tuvo la carga media más alta (573.885 N). Las fuerzas de desunión de todos los grupos sin aplicación de láser fueron superiores a las de todos los grupos con uso de láser. Cuando se aplica el láser, la fuerza media de desunión disminuye al disminuir el grosor del disco, y llega a cero con el grosor de 0,5mm de los discos cementados, para ambos adhesivos de grabado. Conclusiones: la fuerza de desunión disminuye con el uso del láser y disminuye con el grosor del disco. En ausencia de láser, los valores medios de desunión de los discos cementados con un sistema de adhesivo de grabado total son siempre más altos que los de los discos cementados con un sistema de adhesivo de autograbado. Sin ninguna carga adicional, todos los discos de 0,5mm de grosor se desprendieron de los dientes al aplicar el láser.

Restaurações cerâmicas multicamadas e monolíticas: uma revisão de literatura / Multilayered and monolithic ceramic restorations: a literature review

Objetivo: realizar uma revisão de literatura sobre materiais, técnicas de confecção, vantagens, desvantagens e limitações das restaurações cerâmicas multicamadas e monolíticas. Revisão de literatura: embora as cerâmicas odontológicas sejam utilizadas para confecção de restaurações dentárias indiretas, porque têm excelentes propriedades mecânicas e estéticas, são materiais susceptíveis à fratura sob forças oclusais. Para compensar essa fragilidade, restaurações multicamadas são confeccionadas associando um material mais resistente para a infraestrutura e a posterior aplicação de cerâmica para recobrimento estético. Porém, as restaurações multicamadas apresentam como desvantagem o possível lascamento da cerâmica de recobrimento. Essas falhas comprometem a restauração funcional e a estética, exigindo a substituição da peça protética em muitos casos. Sendo assim, devido à evolução de sistemas cerâmicos e técnicas de processamento, surgiram as restaurações cerâmicas monolíticas fabricadas com um único material, a fim de superar tal limitação. Nesse sentido, diferentes materiais e técnicas são apresentados na literatura para a confecção de restaurações cerâmicas monolíticas. Considerações finais: as restaurações multicamadas têm bom resultado estético, porém podem apresentar lascamento da cerâmica de recobrimento. Essa limitação é superada pelo uso de um único material para as restaurações monolíticas, mas o resultado estético pode ser limitado. De um modo geral, a literatura demonstra um bom comportamento clínico para as restaurações cerâmicas multicamadas e monolíticas, quando a técnica de confecção e o sistema cerâmico são bem indicados. (AU)

Objective: the aim of this study was to conduct a literature review about the materials, techniques, advantages, disadvantages and limitations of multilayer and monolitic ceramic restorations. Literature review: although dental ceramics have been used for fabrication of dental restorations due to its good esthetic and mechanical properties, it is a material prone to fracture under oclusal loading. To surpass such fragility, multilayer restorations are fabricated using a resistant framework material associated to esthetic veneering ceramic. However, multilayer restorations present risk to chipping of veneering ceramic. Those failures represent a functional and esthetic problem, leading to restoration replacement. So, the evolution of ceramic systems and techniques generated monolitic restorations using a single material. Several materials and techniques are presented in the literature for fabrication of monolitic ceramic restorations. Final considerations: multilayer restorations present good esthetic result but delamination of veneering ceramic can occur. Such limitation is solved using a single material in monolitic restorations, but esthetic result is limited. In general, literature shows appropriate clinical performance for both multilayer and monolitic ceramic restorations when technique and materials are well indicated. (AU)

Reabilitação em dentes anteriores com pinos de fibra de vidro e coroas metal free: relato de caso / Rehabilitation on previous teeth with glass fiber pins and metal free crowns: case report

Objetivo: descrever uma reabilitação em incisivos superiores por meio da associação de coroas totais de cerâmica e retentor intrarradicular de fibra de vidro. Caso clínico: paciente P. C. G., gênero masculino, de 49 anos de idade, leucoderma, insatisfeito com a estética dos dentes anteriores devido a traumatismo dentário e fraturas recorrentes das restaurações. Após a realização de anamnese, exames clínico e radiográfico, contataram-se restaurações de resina composta insatisfatórias nos dentes anteriores, grandes diastemas entre os dentes e leve inflamação gengival. Para o plano de tratamento, optou-se por realização do tratamento endodôntico dos elementos 12 e 22, pino de fibra de vidro no dente 21, e coroas totais de dissilicato de lítio em todos os incisivos superiores. Considerações finais: com a finalização do tratamento e o retorno do paciente à clínica após seis meses, pode-se observar um tecido gengival sadio e o paciente muito satisfeito com os resultados obtidos. (AU)

Objective: to describe a rehabilitation in upper incisors through the association of total ceramic crowns and intra-radicular fiberglass retainer. Clinical case: patient P. C. G. male sex, 49 years old, leucoderma, dissatisfied with the aesthetics of the anterior teeth due to dental traumatism and recurrent fractures of the restorations. After anamnesis, clinical and radiographic examination, unsatisfactory composite resin restorations on anterior teeth, large diastema between teeth and mild gingival inflammation were contacted. For the treatment plan, we chose to perform endodontic treatment of elements 12 and 22, glass fiber pin on tooth 21, and total crowns of lithium disilicate on all upper incisors. Final considerations: with the completion of the treatment and return of the patient to the clinic after six months, a healthy gingival tissue can be observed and the patient very satisfied with the results obtained. (AU)

Longevity of metal-ceramic crowns cemented with self-adhesive resin cement: a prospective clinical study

Abstract Resin cements are often used for single crown cementation due to their physical properties. Self-adhesive resin cements gained widespread due to their simplified technique compared to regular resin cement. However, there is lacking clinical evidence about the long-term behavior of this material. The aim of this prospective clinical trial was to assess the survival rates of metal-ceramic crowns cemented with self-adhesive resin cement up to six years. One hundred and twenty-nine subjects received 152 metal-ceramic crowns. The cementation procedures were standardized and performed by previously trained operators. The crowns were assessed as to primary outcome (debonding) and FDI criteria. Statistical analysis was performed using Kaplan-Meier statistics and descriptive analysis. Three failures occurred (debonding), resulting in a 97.6% survival rate. FDI criteria assessment resulted in scores 1 and 2 (acceptable clinical evaluation) for all surviving crowns. The use of self-adhesive resin cement is a feasible alternative for metal-ceramic crowns cementation, achieving high and adequate survival rates.

The Epidemiology and National Trends of Bearing Surface Usage in Primary Total Hip Arthroplasty in Korea

BACKGROUND: We analyzed the data for primary total hip arthroplasty (THA) in the Korean nationwide database to assess (1) the epidemiology and national trends of bearing surface usage in THAs and (2) the prevalence of each type of bearing surface according to age, gender, hospital type, primary payer, and hospital procedure volume. METHODS: A total of 30,881 THAs were analyzed using the Korean Health Insurance Review and Assessment Service database for 2007 through 2011. Bearing surfaces were sub-grouped according to device code for national health insurance claims and consisted of ceramic-on-ceramic (CoC), metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), and metal-on-metal (MoM). The prevalence of each type of bearing surface was calculated and stratified by age, gender, hospital type, primary payer, and procedure volume of each hospital. RESULTS: CoC was the most frequently used bearing surface (76.7%), followed by MoP (11.9%), CoP (7.3%), and MoM (4.1%). The proportion of THAs using a CoC bearing surface increased steadily from 71.6% in 2007 to 81.4% in 2011, whereas the proportions using CoP, MoP, and MoM bearing surfaces decreased. The order of prevalence was identical to that in the general population regardless of age, gender, hospital type, primary payer, and hospital procedure volume. CONCLUSIONS: The trends and epidemiology of bearing surface usage in THAs in Korea are different from those in other countries, and the CoC bearing surface is the most prevalent articulation. In future, the results of a large-scale study using nationwide data of THAs involving a CoC bearing surface will be reported in Korea.

Copaiba oil effect on experimental jaw defect in Wistar rats

PURPOSE: To evaluate the effects of copaiba oil on jaw defects repair in Wistar rats treated with bioglass or adipose tissue. METHODS: A jaw defect was randomly created in forty-two rats and filled with bioglass or adipose tissue. The two groups (Gbio and Gcell) were subdivided in three subgroups with seven animals each according to gavage administration: control (distillated water), oil (copaiba oil) and melox (meloxicam). Euthanasia was performed after forty post-operative days. The bone formation was analyzed regarding the histological aspects. RESULTS: The osteoclasts activity was observed only in four subgroups (p=0.78). Regarding the osteoblasts presence, it was very similar between the subgroups, the difference was due to Gcell-melox (p=0.009) that presented less osteoblastic activity. The inflammatory cells were more evident in Gcell-melox subgroup, however, there was no difference in comparison with the other subgroups (p=0.52). Bone formation was observed in all subgroups, just two animals showed no bone formation even after 40 days. More than 50% of bone matrix mineralization was observed in 56% (23 animals) of the analyzed areas. The bone matrix mineralization was not different between subgroups (p=0.60). CONCLUSIONS: The subgroups that received copaiba oil showed bone repair, although not statistically significant in comparison to subgroups treated whit meloxicam or controls. Copaiba oil administered by gavage had no effect on bone repair in this experimental model. .

Hard tissue regeneration using bone substitutes: an update on innovations in materials

Bone is a unique organ composed of mineralized hard tissue, unlike any other body part. The unique manner in which bone can constantly undergo self-remodeling has created interesting clinical approaches to the healing of damaged bone. Healing of large bone defects is achieved using implant materials that gradually integrate with the body after healing is completed. Such strategies require a multidisciplinary approach by material scientists, biological scientists, and clinicians. Development of materials for bone healing and exploration of the interactions thereof with the body are active research areas. In this review, we explore ongoing developments in the creation of materials for regenerating hard tissues.

Plastica gengival associada a laminados cerƒmicos para resolu‡Æo est‚tica / Periodontal plastic surgery in association with porcelain veneers for aesthetic resolution

Algumas vezes nos deparamos no consult¢rio com situa‡ães cl¡nicas, nas quais a falta de harmonia no sorriso encontra-se devido a uma grande exposi‡Æo de tecido gengival. Nestes casos o profissional deve ser capaz de realizar uma an lise detalhada dos componentes est ticos e dinƒmicos do sorriso, em busca de um planejamento e tratamento satisfat¢rios, que poder  englobar diferentes especialidades odontol¢gicas. Para estas situa‡ães, a associa‡Æo periodontia/pr¢tese ‚ uma alternativa vi vel a ser proposta ao paciente, que vem sendo utilizada de maneira positiva em busca de uma condi‡Æo est‚tica e funcional favor vel ao paciente, sem deixar de lado os princ¡pios de preserva‡Æo dos tecidos periodontais e da estrutura dent ria remanescente. Diante disso, o objetivo deste trabalho foi descrever um caso cl¡nico no qual a associa‡Æo periodontia/pr¢tese foi proposta para corre‡Æo de sorriso gengival e vestibulariza‡Æo dent ria. Atrav‚s do resultado cl¡nico obtido e a satisfa‡Æo do paciente, podemos entender que o tratamento multidisciplinar envolvendo a associa‡Æo de t‚cnicas periodontais e prot‚ticas em casos com comprometimento est‚tico gengival e dental, ‚ favor vel para alcan‡ar um resultado positivo.

Sometimes we face clinical situations in which the lack of harmony in the smile is caused by a major exhibition of the gingival tissue. In these cases the professional should be able to perform a detailed analysis of the static and dynamic components of the smile, in search of a satisfactory planning and treatment which may include different dental specialties. For these situations, the association of periodontics/prosthesis is a viable alternative that has been used positively in search of an aesthetic and functional condition that benefits the patient, without leaving aside the preservation of periodontal tissues and of the remaining structure of the tooth. Thus, the aim of this study was to describe a case in which the association between these two areas was proposed to correct gummy smile and dental vestibularization. Clinical results and the satisfaction of the patient indicate that this multidisciplinary treatment combining periodontal and prosthetic techniques is favorable to positive results in cases of compromised smile aesthetics due to excessive gum tissue.

Reabilita‡Æo est‚tica do sorriso por meio do sistema cerƒmico dissilicato de l¡tio – relato de caso / Aesthetic rehabilitation of the smile using lithium disilicate ceramic system – clinical report

O restabelecimento da harmonia do sorriso atrav‚s das cerƒmicas odontol¢gicas, quando realizado com crit‚rio e dentro de indica‡ães espec¡ficas, traz resultados extremamente previs¡veis. Para a reabilita‡Æo funcional e est‚tica, muitos materiais cerƒmicos podem ser empregados, como zirc“nia, leucita, alumina, feldspato e dissilicato de l¡tio. Dentre esses materiais, destaca-se o dissilicato de l¡tio que tem como caracter¡sticas: resistˆncia ao desgaste, ao ataque qu¡mico, … oxida‡Æo e a altas temperaturas; baixa condutividade el‚trica; dilata‡Æo t‚rmica pr¢xima do zero; boas propriedades ¢pticas e biocompatibilidade com o periodonto; excelente est‚tica; estabilidade de cor e refor‡o da estrutura dental. As indica‡ães para o uso do dissilicato de l¡tio sÆo m£ltiplas e nÆo limitadas para facetas em casos de dentes onde nÆo houve resposta favor vel ao clareamento dental, dentes com restaura‡ães m£ltiplas, fechamento de diastemas, altera‡Æo de forma e contorno dental, restitui‡Æo de dentes ausentes ou fraturados, entre outras. A versatilidade da cerƒmica de dissilicato de l¡tio faz com que possa ser utilizado em diferentes situa‡ães cl¡nicas. Seu uso concomitante tanto para facetas como sobre n£cleos met licos fundidos ‚ apresentado aqui com um resultado est‚tico bastante satisfat¢rio, sendo indicado para situa‡ães onde h  necessidade de aliarmos est‚tica e resistˆncia como atributos indispens veis.

The reestablishment of a harmonious smile through dental ceramics, when properly conducted and with specific indications, can achieve extremely predictable results. For aesthetic and functional rehabilitation, many ceramic materials can be used such as zirconia, leucite, alumina, feldspar, and lithium disilicate. Among these materials the lithium disilicate stands out due to the following characteristics: its resistance to wear, to chemical attack, high tem peratures and oxidation; low electrical conductivity; near zero thermal expansion; good optical properties and biocompatibility with periodontal; excellent esthetics; color stability and reinforcement of tooth structure. The indications for the use of lithium disilicate are not limited to multiple facets of teeth in cases where there was no favorable response to tooth whitening, and also comprehend teeth with multiple restorations, diastema closure, shape alteration, and dental contouring, replacement of missing or fractured teeth, among others. The versatility of lithium disilicate ceramics allows its utilization in several clinical situations. The concomitant use of lithium disilicate for veneers and over metal has satisfactory aesthetic results, as reported in the present studying cases that require both aesthetics and resistance.

Adaptação marginal em copings de dois sistemas cerâmicos livres de metal / Marginal fit in copings of two metal free ceramic systems

Este trabalhou avaliou a adaptação marginal de infraestruturas cerâmicas (copings em alumina) de dois sistemas cerâmicos livres de metal. Foram pesquisados os sistemas In-Ceram e Procera. Os valores de discrepância vertical presentes entre as margens de nove copings de cada sistema cerâmico e a margem de um modelo mestre metálico foram medidos com microscópio eletrônico de varredura em 5 pontos de cada infraestrutura. Esses valores foram medidos em micrômetros (pm). Os resultados foram analisados estatisticamente com o software SPSS (Statistical Package for the Social Sciences 11.0), através do teste t de Student, considerando-se significativos os valores de p<0(05. Os valores médios de discrepância marginal dos dois sistemas, medidos em microscópio eletrônico de varredura, mostraram diferença estatística entre si (p=0,001), sendo observadas desadaptações de 39±11pm (sistemas Procera) e 11 5±56pm (sistema In-Ceram). Conclui-se que os dois sistemas cerâmicos livres de metal avaliados apresentaram adaptação marginal dentro de limites aceitáveis clinicamente.

This work has evaluated the marginal fit of alumina copings of two metal free ceramic systems, namely Procera and In-Ceram systems. The marginal fit values of the margins in nine copings of each ceramic system and in a metal master model were assessed using electron- scanning microcopy in five points of the margin of each coping. Such values were measured in micrometers (pm). The results were analyzed statistically by the SPSS software (p<0.05). The marginal fit mean values for both systems have presented statistical difference (p=0.001), being of 39±11 pm and 115±56pm for the Procera and Inc-Ceram systems, respectively. Both systems have presented marginal fit according to the clinical acceptance.

Paired evaluation of calvarial reconstruction with prototyped titanium implants with and without ceramic coating

PURPOSE: To investigate the osseointegration properties of prototyped implants with tridimensionally interconnected pores made of the Ti6Al4V alloy and the influence of a thin calcium phosphate coating. METHODS: Bilateral critical size calvarial defects were created in thirty Wistar rats and filled with coated and uncoated implants in a randomized fashion. The animals were kept for 15, 45 and 90 days. Implant mechanical integration was evaluated with a push-out test. Bone-implant interface was analyzed using scanning electron microscopy. RESULTS: The maximum force to produce initial displacement of the implants increased during the study period, reaching values around 100N for both types of implants. Intimate contact between bone and implant was present, with progressive bone growth into the pores. No significant differences were seen between coated and uncoated implants. CONCLUSION: Adequate osseointegration can be achieved in calvarial reconstructions using prototyped Ti6Al4V Implants with the described characteristics of surface and porosity. .

Clinical and cone beam computed tomography comparison of NovaBone Dental Putty and PerioGlas in the treatment of mandibular Class II furcations.

Objective: The objective of this study is to compare the putty form of bioactive glass (NovaBone Dental Putty) and particulate form (PerioGlas) in the resolution of Class II furcation defects. Background: Use of bone regeneration materials is becoming common in periodontal surgeries including furcation defects and the promising role of bioactive allograft materials has encouraged their presentation in different morphologic forms with their own advantages and disadvantages giving the operator ample of choices in his/her periodontal armamentarium. Materials and Methods: A total of 28 patients with 40 Class II furcation defects were enrolled in the study and were randomly allocated to two groups with 20 sites in each group. Measurement of defects was done using clinical and cone beam computed tomography (CBCT) methods. The patients were followed-up at 6 months. Intergroup comparisons were done using Mann-Whitney U-test. Results: There was no significance between group differences in clinical parameters and defect size at the baseline. After 6 months, particulate form showed a mean resolution of 50.48 ± 16.47% and 51.11 ± 9.48%, respectively for vertical defect and horizontal defect while putty form showed a mean resolution of 43.48 ± 9.33% and 42.88 ± 11.09%, respectively. Mean resolution in furcation width was 40.15 ± 13.00% for particulate form as compared with 36.27 ± 11.41% in putty form. Statistically, there was no significant difference between two groups except for the horizontal defect fill where PerioGlas showed statistically better results. Conclusion: Putty form was comparable to particulate form for resolution of Class II furcation defects.

Perfil da distribuição da tensão na interface dos materiais restauradores e cimentos odontológicos através do Método do Elemento Finito / FEA and stress profile distribution at the interface of restorative materials and dental cements

O conhecimento sobre o modo de distribuição da tensão nos agentes cimentantes é pouco descrito quando se refere ao módulo elástico do material. Objetiv: avaliar a distribuição da tensão gerada pelo material restuarador nos diferentes agentes cimentantes, através do método dos elementos finitos (MEF)...

Ceramic Head Fracture in Ceramic-on-Polyethylene Total Hip Arthroplasty

Revision rates of total hip arthroplasty have decreased after introducing total hip arthroplasty (THA) using ceramic component, since ceramic components could reduce components wear and osteolysis. The fracture of a ceramic component is a rare but potentially serious event. Thus, ceramic on polyethylene articulation is gradually spotlighted to reduce ceramic component fracture. There are a few recent reports of ceramic head fracture with polyethylene liner. Herein, we describe a case of a ceramic head component fracture with polyethylene liner. The fractured ceramic head was 28 mm short neck with conventional polyethylene liner. We treated the patient by total revision arthroplasty using 4th generation ceramic on ceramic components.

Platelet-rich plasma in the treatment of Class II furcation defects: a histometrical study in dogs

OBJECTIVE: This study was designed to evaluate the potential adjunctive benefits of platelet-rich plasma (PRP) when used with guided-tissue regeneration (GTR) and bioactive glass (BG) in the treatment of Class II furcation lesions. MATERIAL AND METHODS: Bilateral Class II furcation lesions were surgically created and allowed to become chronic in the mandibular third premolars of 9 dogs. The defects were randomly assigned to: A) GTR+BG and B) GTR+BG+PRP. Similar defects were created in the maxillary third premolars and received the same treatments after 45 days. Dogs were sacrificed 90 days after the first treatment. The histometric parameters evaluated were: connective tissue adaptation, new cementum, new bone, mineralized bone area, non-mineralized bone area, and residual BG particle area. RESULTS: Data analysis showed a superior length of new cementum and a greater mineralized bone area for group B in both periods (p<0.05). The non-mineralized bone area was greater in the control group (p<0.05) in both periods. CONCLUSION: Within the limits of this study, it can be concluded that the use of PRP in the treatment of Class II furcation defects may enhance the amount of new cementum and provide a more mineralized bone in a shorter period of time.

Radiographic evaluation of the effect of porcine submucosamembrane graft and bioactive glass on bone filling in rat calvaria / Avaliação radiográfica do efeito de membrana de submucosa suína e vidro bioativo no preenchimento ósseo em calvária de rato

Objectives: The aim of this study was to radiographically evaluate the filling of standardized bone defectsin rat calvaria treated with bioactive glass and with porcine submucosa membrane, alone or in combination,when compared to defects filled with clot. Materials and methods: Eighty male Wistar rats, weighing 250to 300 g, were divided into four groups, with trial period of two and eight weeks. Standardized bone woundswere surgically created in the calvaria measuring 6 mm in diameter and treated with bioactive glass, porcinesubmucosa membrane, combination of both or only clot. After two or eight weeks, the animals wereeuthanized and bone specimens were collected for evaluation with standard radiographs and digitized foranalysis with ImageJ image analyzer to compare the percentage of filling of the defects by measuring thevariations of levels of gray. Data were scored and analyzed statistically (ANOVA and Tukey HSD, p < 0.05).Results: The association of bioactive glass and submucosa membrane showed the best result of filling ofbone cavities, followed by the single use of bioactive glass. Membrane alone showed similar results withthe clot group. Conclusion: It was possible to conclude that the association of bioactive glass and porcinesubmucosa membrane could be good option for bone filling of bone defects.

Objetivos: O objetivo deste estudo foi avaliar radiograficamente o preenchimento de defeitos ósseos padronizados em calvária de ratos, tratados com vidro bioativo e com membrana de submucosa suína, isolados ou em associação, quando comparados com defeitos preenchidos com coágulo. Materiais e métodos: Oitenta ratos Wistar machos, pesando de 250 a 300 g, foram separados em quatro grupos, com períodos de avaliação de duas ou oito semanas. Defeitos ósseos padronizados foram cirurgicamente criados na calvária medindo 6 mm de diâmetro e tratados com vidro bioativo, membrana submucosa suína, combinação de ambos ou apenas com coágulo. Após duas ou oito semanas, os animais foram mortos e os espécimes ósseos foram coletados para avaliação com radiografias padronizadas e digitalizadas para análise com programa ImageJ, visando a comparar a porcentagem de preenchimento dos defeitos por meio da variação dos níveis de cinza. Os dados foram obtidos e avaliados estatisticamente (ANOVA e Tukey HSD, p < 0,05). Resultados: A associação do vidro bioativo com a membrana submucosa suína demonstrou os melhores resultados de preenchimento das cavidades ósseas,seguido pelo uso isolado do vidro bioativo. A membrana isolada demonstrou resultados semelhantes ao grupo coágulo. Conclusão: Foi possível concluir que a associação do vidro bioativo e da membrana submucosa suína pode ser uma boa opção para o preenchimento de defeitos ósseos.