Clinical, Radiographic, and Histological Changes in Enamel and Dentin, According to Caries Care International™ Evaluation, In Permanent Posterior Teeth: An Observational Study / Cambios Clínicos, Radiográficos e Histológicos en Esmalte y Dentina, Según Evaluación de Caries Care International™, en Dientes Posteriores Permanentes: Un Estudio Observacional

SUMMARY: CariesCare International ™ practical guide is a tool for the comprehensive assessment and treatment of caries that synthesizes clinical and radiographic diagnosis and risk factors, classifying the severity, progression, and activity of lesions. The objective of this study was to analyze the validity and prediction characteristics of the proposed dental caries classification in the CariesCare International ™ practical guide as a reference through clinical and radiographic evaluation versus histological evaluation. Ninety-seven permanent posterior teeth were evaluated, and clinical and radiographic diagnoses were determined according to parameters defined in the CariesCare International™ guide as a reference. Subsequently, histological evaluation was performed to compare each stage of dental caries progression, and statistical analysis was applied. When comparing the validity and prediction values between radiographic and clinical diagnoses in relation to histological evaluation, a low sensitivity and high specificity relationship was found. The sensitivity and specificity percentages between the clinical and radiographic methods show that the clinical method has a lower number of false negatives. Histological changes in dental tissue were evident from the earliest stages of lesions, even in those not related to the caries process, indicating that the dentist should be careful when deciding on a treatment plan and take into account all variables involved in the caries process, as proposed by the CariesCare International ™ guide.

La guía práctica CariesCare International™ es una herramienta para la evaluación y tratamiento integral de la caries que sintetiza el diagnóstico clínico y radiográfico y los factores de riesgo, clasificando la gravedad, progresión y actividad de las lesiones. El objetivo de este estudio fue analizar la validez y características de predicción de la clasificación de caries dental propuesta en la guía práctica CariesCare International™ como referencia a través de la evaluación clínica y radiográfica versus la evaluación histológica. Se evaluaron noventa y siete dientes posteriores permanentes y se determinaron diagnósticos clínicos y radiográficos según parámetros definidos en la guía CariesCare International™ como referencia. Posteriormente se realizó una evaluación histológica para comparar cada etapa de progresión de la caries dental y se aplicó análisis estadístico. Al comparar los valores de validez y predicción entre los diagnósticos radiológicos y clínicos en relación con la evaluación histológica, se encontró una relación de baja sensibilidad y alta especificidad. Los porcentajes de sensibilidad y especificidad entre el método clínico y radiográfico muestran que el método clínico tiene un menor número de falsos negativos. Los cambios histológicos en el tejido dental fueron evidentes desde las primeras etapas de las lesiones, incluso en aquellas no relacionadas con el proceso de caries, lo que indica que el odontólogo debe tener cuidado al decidir un plan de tratamiento y tener en cuenta todas las variables involucradas en el proceso de caries, tal como propone la guía CariesCare International™.

Effect of adding fluoride to camellia sinensis against dentin erosion generated by non-bacterial acids / Efecto de la adición de flúor a la camellia sinensis frente a la erosión de dentina generada por ácidos no bacterianos

Introduction: Natural products are an option to be used in different conditions in the oral cavity, such as Camellia sinensis, which due to its different properties would be beneficial in the erosion of the dental surface. Objetive: Determinar el efecto del extracto de Camellia sinensis (C. sinensis) adicionado con flúor frente a la acción erosiva de ácidos no bacterianos en la superficie de la dentina humana. Materials and Methods: Quasi-experimental, prospective, longitudinal, and in vitro study, consisting of 50 samples of human dentin, which were classified into 5 study groups: distilled water, hydrochloric acid, 2% C. sinensis extract, sodium fluoride. 2% and 2% C. sinensis extract added with 2% sodium fluoride. The surface roughness of each sample was evaluated with the SRT6200 digital roughness meter, obtaining a total average roughness and the measurements were carried out in two moments. Results: It was observed that the 2% C. sinensis extract, the 2% sodium fluoride, and the C. sinensis extract added with 2% sodium fluoride, showed a variation in surface roughness between before and after, which was not significant (p<0.05) in all cases. It should be noted that the C. sinensis plus sodium fluoride group is the one that obtained the best variation in the mean surface roughness than the other groups studied. Conclusions: The 2% C. sinensis extract, 2% sodium fluoride, and the combination of both compounds demonstrated an inhibitory effect against the erosive action of hydrochloric acid (0.01 M) on the dentin surface, not presenting a statistically significant difference in the results.

Introducción: Los productos naturales son una opción para ser usados en diferentes afecciones en la cavidad bucal, como lo podría ser la Camellia sinensis, que por sus diferentes propiedades sería de beneficio en la erosión de la superficie dental. Objetivo: Determinar el efecto del extracto de Camellia sinensis (C. sinensis) adicionado con flúor frente a la acción erosiva de ácidos no bacterianos en la superficie de la dentina humana. Materiales y Métodos: Estudio cuasi experimental, prospectivo, longitudinal ein vitro, constituido por 50 muestras de dentina de dientes permanentes, que se clasificaron en 5 grupos de estudio: Agua destilada, ácido clorhídrico, extracto de C. sinensis a 2%, fluoruro de sodio al 2% y extracto de C. sinensisa 2% adicionado con fluoruro de sodio al 2%. Se evaluó la rugosidad superficial de cada muestra con el rugosímetro digital SRT6200, obteniéndose una rugosidad media total y se realizaron las mediciones en dos momentos. Resultado: Se observó que el extracto de C. sinensisal 2%, el fluoruro de sodio al 2% y el extracto de C. sinensis adicionado con fluoruro de sodio al 2%, presentaron una variación de la rugosidad superficial entre el antes y el después, no siendo esta significativa (p<0.05) en todos los casos. Cabe resaltar que el grupo C. sinensis más fluoruro de sodio, es el que obtuvo una mejor variación de la media de rugosidad superficial, que los otros grupos estudiados. Conclusión: El extracto de C. sinensisal 2%, el fluoruro de sodio al 2% y la combinación de ambos compuestos demostraron un efecto inhibitorio frente a la acción erosiva del ácido clorhídrico (0,01 M) en la superficie de dentina, no presentando una diferencia estadísticamente significativa en los resultados.

Effect of Casearia sylvestris on the obliteration of dentinal tubules and the control of dental sensitivity / Efecto de Casearia sylvestris sobre la obliteración de los túbulos dentinarios y el control de la sensibilidad dental

The present study evaluated the efficacy of the mineralizing action of Casearia sylvestris ethanolic extract on bovine dentin blocks in its pure form and in dental paste, through scanning electron microscopy. The dentin blocks were immersed in artificial saliva and incubat ed at 37°C for 7 days. Subsequently, six groups were treated with different test substances and analysed qualitatively and quantitatively at 30 and 60 days. The tests used were Kruskal - Wallis and Dunn's. Shapiro - Wilk and ANOVA. The qualitative analysis at 30 days showed a difference between the groups treated with ethanolic extract and toothpaste. Quantitatively, at 30 days, treatment with ethanolic extract of Casearia showed a greater number of open dentinal tubules. At 60 days, the difference persisted on ly for the blocks treated with toothpaste. The results obtained indicated that there is a positive relationship between the use of Casearia sylvestris and obliteration of dentinal tubules

El presente estudio evaluó la eficacia de la acción mineralizante del extracto etanólico de Casearia sylvestris sobre bloques de dentina bovina en su forma pura y en pasta dental, mediante microscopía electrónica de barrido. Los bloques de dentina se sumergieron en saliva artificial y se incubaron a 37°C durante 7 días. Posteriormente, se trataron seis grupos con diferentes sustancias de ensayo y se analizaron cualitativa y cuantitativamente a los 30 y 60 días. Las p ruebas utilizadas fueron Kruskal - Wallis y Dunn's. Shapiro - Wilk y ANOVA. El análisis cualitativo a los 30 días mostró una diferencia entre los grupos tratados con extracto etanólico y pasta dentífrica. Cuantitativamente, a los 30 días, el tratamiento con ex tracto etanólico de Casearia mostró un mayor número de túbulos dentinarios abiertos. A los 60 días, la diferencia persistió sólo para los bloques tratados con pasta dentífrica. Los resultados obtenidos indicaron que existe una relación positiva entre el us o de Casearia sylvestris y la obliteración de los túbulos dentinarios

Fluoruro de estaño en el control de cavidades sin restauración en dientes temporales / Stannous fluoride in nonrestorative cavity control in primary teeth

Introducción: el control de cavidades sin restauración (NRCC, por sus siglas en inglés), es una opción de tratamiento conservador y no invasivo para dentina cariosa, sobre todo en dentición temporal. Una de las estrategias del NRCC es la remineralización. El fluoruro de estaño (FDE) puede considerarse, como una opción viable ya que existe evidencia de su eficacia cariostática. Objetivo: valorar al FDE como remineralizante alternativo en dentina de molares temporales, asociado al NRCC. Material y métodos: se efectuó un estudio clínico, epidemiológico, y descriptivo con preescolares voluntarios de 3 a 5 años de edad con consentimiento firmado de participación en el estudio, y que presentaron molares con ICDAS 5 y 6. La aplicación del FDE a 0.8%, la evaluación de la dureza de la dentina con los criterios de Nyvad, y el diagnóstico del estado pulpar, la efectuó un operador entrenado para esta finalidad. Se aplicó un análisis estadístico descriptivo y uno no paramétrico. Resultados: el efecto cariostático producido por el FDE a 0.8%, sobre dentina afectada de molares temporales de niños mexicanos fue estadísticamente significativo durante cinco meses. Conclusiones: la aplicación de fluoruro de estaño puede considerarse como una alternativa de tratamiento cariostático asociado al NRCC para niños de 3 a 5 años de edad (AU)

Introduction: nonrestorative cavity control (NRCC), is a conservative and non-invasive treatment option for carious dentin, especially in primary dentition. One of the NRCC strategies is remineralization. Stannous Fluoride (SDF) can be considered as a viable option since there is evidence of its cariostatic efficacy. Objective: to evaluate FDE as an alternative remineralizing agent in the dentin of primary molars, associated with NRCC. Material and methods: a clinical, epidemiological, and descriptive study was carried out with preschool volunteers aged 3 to 5 years with signed consent to participate in the study, and who presented molars with ICDAS 5 and 6. The application of FDE at 0.8%, the evaluation of dentin hardness with the Nyvad criteria, and the diagnosis of pulp status, was carried out by an operator trained for this purpose. A descriptive and non-parametric statistical analysis was applied. Results: the cariostatic effect produced by 0.8% FDE on affected dentin of primary molars of Mexican children was statistically significant for five months. Conclusions: the application of stannous fluoride can be considered as an alternative cariostatic treatment associated with NRCC for children 3 to 5 years of age (AU)

A microscopia eletrônica de varredura pode ser usada para medir quantitativamente a rugosidade da dentina? / Can Scanning Electron Microscopy be used to quantitatively measure dentine roughness?

Objective: The aim of this study was to determine if SEM used with imaging software could be used to quantitatively determine the extent of dentine roughness due to tooth-brushing. Material and methods: Flat, polished dentine surfaces were subjected to 25,000 cycles of simulated tooth-brushing at 2 strokes per second with a load of 200 g. At the end of the brushing cycle, dentine surfaces were first assessed using profilometry and then subjected to SEM analysis. Ra (average roughness) readings were obtained for profilometric assessment. Using imaging software, the horizontal distance between adjacent characteristic grooves noted on micrographs was measured, ensuring that the middle of each crest of the associated groove was used as the reference point, the Crest-to-Crest distance (C-C distance). These two parameters were examined statistically for correlation. Results: When Spearman Rank tests were utilized the correlation between average Ra and crest to crest measurements was 0.709 (p <0.01). The Bland Altman plot, however, showed poor agreement between the two test parameters. Conclusion: Further work is needed to validate the use of this methodology in the quantitative assessment of tooth surface loss due to abrasion (AU)

Objetivo: O objetivo deste estudo foi determinar se o MEV usado com software de imagem poderia ser usado para determinar quantitativamente a extensão da rugosidade da dentina devido à escovação dentária. Material e Métodos: Superfícies dentinárias planas e polidas foram submetidas a 25.000 ciclos de escovação dentária simulada a 2 movimentos por segundo com uma carga de 200g. No final do ciclo de escovação, as superfícies dentinárias foram primeiro avaliadas por perfilometria e depois submetidas à análise MEV. Leituras de Ra (rugosidade média) foram obtidas para avaliação perfilométrica. Utilizando um software de imagem, foi medida a distância horizontal entre sulcos característicos adjacentes observados nas micrografias, garantindo que o meio de cada crista do sulco associado fosse usado como ponto de referência, a distância crista a crista (distância CC). Esses dois parâmetros foram examinados estatisticamente para correlação. Resultados: Quando foram utilizados os testes de Spearman Rank, a correlação entre a média de Ra e as medidas de crista a crista foi de 0,709 (p<0,01). O gráfico de Bland Altman, no entanto, mostrou fraca concordância entre os dois parâmetros de teste. Conclusão: Mais trabalhos são necessários para validar o uso desta metodologia na avaliação quantitativa da perda da superfície dentária devido à abrasão(AU)

Stability of dentin matrix treated with caffeic acid phenethyl ester at different concentrations

Aim: The aim of this study was to investigate the impact of pretreatment with ethanolic solutions of caffeic acid phenethyl ester (CAPE) at varying concentrations on the dentin collagen matrix, specifically focusing on its biomodification potential. This was assessed through evaluations of the modulus of elasticity and changes in mass. Methods: Seventy dentin collagen matrices (demineralized sticks) were prepared to receive treatments with ethanolic solutions of CAPE at concentrations of 0.05%, 0.1%, 0.5%, or 2.5%, or with control treatment solutions (distilled water or ethanol) for one hour. The dentin matrices were evaluated for modulus of elasticity and mass before (baseline), immediately after treatment (immediately), and after storage in Simulated Body Fluid (SBF) for time intervals of 1 and 3 months. Results: Generalized linear models for repeated measures over time indicated no significant differences between groups (p=0.7530) or between different time points (p=0.4780) in terms of the modulus of elasticity. Regarding mass variation, no differences were observed in the time interval between 1 month and the immediate time (p=0.0935). However, at the 3-month mark compared to the immediate time, the 0.1% CAPE group exhibited less mass loss compared to the water group (p=0.0134). Conclusion: This study concludes that various concentrations of CAPE in an ethanolic solution did not affect the modulus of elasticity of dentin, suggesting that CAPE lacks biomodifying potential in this context. However, it was observed that 0.1% CAPE positively influenced the variation in mass over different evaluation time intervals

Color and surface roughness alterations of bulk-fill resin composites submitted to simulated toothbrushing with whitening dentifrices

Aim: To evaluate the surface roughness and color stability of bulk-fill resin composites after simulated toothbrushing with whitening dentifrices. The radioactive/relative dentin abrasion (RDA) and radioactive/relative enamel abrasion (REA) of dentifrices were also assessed. Methods: Specimens (n=10) of Tetric N Ceram Bulk Fill (TNCB), Filtek One Bulk Fill (FOB) resin composites, and Z100(Control) were prepared using a cylindrical Teflon matrix. Surface roughness (Ra, µm) was assessed by a roughness meter and the color evaluations (ΔEab , ΔE00 , WID ) were performed using a digital spectrophotometer based on the CIELAB system. Three measurements were performed per sample, before and after simulated toothbrushing with 3D Oral-B White Perfection (3DW) and Black is White (BW) dentifrices. The abrasivity (REA and RDA values) of the used dentifrices was also determined by the Hefferren abrasivity test. Results: The Ra values increased significantly in all resin composites after 3DW and BW toothbrushing. The acceptable threshold color varied among resin composites, and TNCB and Z100 presented the highest ΔEab and ΔE00 for BW dentifrice. The 3DW dentifrice was significantly more abrasive than BW dentifrice on enamel and dentin. Conclusions: simulated toothbrushing with tested whitening dentifrices increased the surface roughness at acceptable levels. The Tetric N Ceram Bulk-fill and Z100 composite showed the highest color alteration in BW. 3D White Perfection dentifrice was more abrasive on dentin and enamel than Black is White.

Qualitative Characterization of the Abrasive Component of Charcoal-Containing Toothpastes and the Effect on Dentin Roughness / Caracterización Cualitativa del Componente Abrasivo de las Pastas Dentales que Contienen Carbón Vegetal y la Rugosidad de la Dentina

This study investigated the effect of commercially available whitening toothpastes containing charcoal on dentin. Nine charcoal-containing toothpastes were compared with 3 whitening toothpastes (positive control) and distilled water (negative control). Periodontally hopeless molars were cleaned and washed and the occlusal table removed to expose dentin. The teeth were mounted in auto-polymerizing resin and exposed dentine surfaces polished with water-cooled decreasing grits of silica carbide paper up to 1500 grit. Baseline average roughness (Ra) measurements were taken. Specimens were then mounted in an automatic tooth-brushing machine and brushed for 5000 cycles. Repeat Ra measurements were taken. Specimens were brushed in 5000-cycle increments up to 25,000 cycles with Ra measurements being taken at each time point. Between abrasive challenges specimens were stored in distilled water. All toothpaste samples were sputter coated and examined under a scanning electron microscope to qualify the shape and size of the abrasive components of the formulations. Data were analyzed using a two-way analysis of variance with post hoc Bonferroni. The results demonstrated that the abrasive effect, in terms of increasing Ra, on dentin was noted as early as 5000 cycles for all the tested toothpastes (p<0.05). The effect of continued brushing showed an overall cumulative effect on dentine roughness up to 25000 cycles. When toothpastes were compared between groups at each time-point, dentin specimens brushed with Pursito were statistically similar to the control group. At 25,000 cycles all dentin samples were significantly rougher compared to Pursito and the control groups. It may be concluded that all the tested toothpastes have an abrasive effect on dentin surfaces.

Este estudio investigó el efecto sobre la dentina de las pastas dentales blanqueadoras disponibles en el mercado que contienen carbón vegetal. Se compararon nueve dentífricos que contenían carbón vegetal con 3 dentífricos blanqueadores (control positivo) y agua destilada (control negativo). Los molares sin material periodontal se limpiaron y lavaron y se retiró la tabla oclusal para exponer la dentina. Los dientes se montaron en resina autopolimerizable y las superficies expuestas de la dentina se pulieron con papel de carburo de sílice de grano decreciente enfriado con agua hasta grano 1500. Se tomaron medidas de rugosidad promedio (Ra) de referencia. Luego, las muestras se montaron en una máquina automática de cepillado de dientes y se cepillaron durante 5000 ciclos. Se tomaron medidas repetidas de Ra. Las muestras se cepillaron en incrementos de 5000 ciclos hasta 25 000 ciclos y se tomaron medidas de Ra en cada punto de tiempo. Entre periodos abrasivos, las muestras se almacenaron en agua destilada. Todas las muestras de pasta de dientes se recubrieron por pulverización catódica y se examinaron bajo un microscopio electrónico de barrido para calificar la forma y el tamaño de los componentes abrasivos de las formulaciones. Los datos se analizaron utilizando un análisis de varianza de dos vías de Bonferroni post hoc. Los resultados demostraron que el efecto abrasivo, en términos de aumento de Ra, sobre la dentina se notó ya en 5000 ciclos para todas las pastas dentales probadas (p<0,05). El efecto del cepillado continuo mostró un efecto acumulativo general sobre la rugosidad de la dentina hasta 25.000 ciclos. Cuando se compararon las pastas dentales entre los grupos en cada momento, las muestras de dentina cepilladas con Pursito fueron estadísticamente similares al grupo de control. A los 25.000 ciclos, todas las muestras de dentina eran significativamente más ásperas en comparación con Pursito y los grupos controles. Se puede concluir que todas las pastas dentales probadas tienen un efecto abrasivo sobre las superficies dentinarias.

Bond strength of composite resin/universal adhesive to dentin submitted to radiotherapy / Fuerza de unión de resina compuesta/adhesivo universal a dentina sometida a radioterapia

Aim: To evaluate the bond strength of a universal adhesive system to dentin submitted to radiotherapy. Materials and Methods: Sixty extracted human teeth were divided into two groups (n = 30): without radiotherapy (control); with radiotherapy, according to the adhesive protocol (n=15): ER-etch-and-rinse (acid + Single Bond Uni-versal); SE-self-etch (Single Bond Universal). The analyzes were shear bond strength (SBS) (n=10), failure pattern (n=10) and scanning electron microscopy (n=5). Data was analyzed by a two-way ANOVA (α =0.05). Results: The radiotherapy decreased SBS of the restorative material to dentin (p<0.0001). The ER protocol provided lower bond strength values (p<0.001). The predominant type of fracture without radiotherapy was mixed (SE), cohesive to the material (ER). Both protocols presented adhesive failures with radiotherapy. Teeth had a hybrid layer and long resin tags (without radiotherapy) and few tags (with radiotherapy). Conclusions: The SE adhesive mode favors the shear bond strength of resin to dentin in teeth submitted to radiotherapy.

Objetivo: Evaluar la fuerza de adhesión de un sistema adhesivo universal a la dentina sometida a radioterapia. Materiales y Métodos: Sesenta dientes humanos extraídos se dividieron en dos grupos (n = 30): sin radioterapia (control); con radioterapia, según protocolo adhesivo (n=15): ER-grabado y enjuague (ácido + Single Bond Universal); autograbado SE (Single Bond Universal). Los análisis ejecutados fueron resistencia al cizallamiento (SBS) (n=10), patrón de falla (n=10) y microscopía electrónica de barrido (n=5). Los datos se sometieron al test de ANOVA de dos vías (α =0,05). Resultados: La radioterapia disminuyó la SBS del material restaurador a la dentina (p<0,0001). El protocolo ER proporcionó valores de fuerza de unión más bajos (p<0,001). El tipo de fractura predominante sin radioterapia fue mixta (SE), cohesiva al material (ER). Ambos protocolos presentaron fallas adhesivas con radioterapia. Los dientes tenían una capa híbrida y colas de resina largas (sin radioterapia) o pocas colas de resina (con radioterapia). Conclusión: El modo adhesivo SE favorece la resistencia al corte de la resina a la dentina en dientes sometidos a radioterapia.

Clinical implementation of comprehending dentin on a microscopic level

SUMMARY: The aim of the present in vitro study is to visualize dentin to get an in-depth knowledge of the nature of dentin that could provide useful information regarding conditioning dentinal substrate when treating dentinal lesions. Forty-nine extracted human third molars were obtained and prepared to produce artificial dentinal lesions through demineralizing with acetic acid for 7 and 14 days, or lactic acid for 7 days. The teeth were divided into groups and treated with either NaOCl, pepsin, trypsin, or phosphoric acid. To obtain information on the morphology of the treated dentinal surfaces, all samples were visualized under high resolution field emission scanning electron microscope. With high magnification reaching x50000 dentin was clearly visualized together with its constitutes. The effect of various demineralization approaches and various treatment protocols were demonstrated clearly. The relationship between the conditioning procedure steps and the subsequent bond strength was discussed. To our best knowledge, there is no previous clear highly magnified scanning electron microscope images for dentin, and dentinal components and constitutes with and without various treatments. The current in vitro study suggests the complexity nature of dentin as a substrate that should be treated carefully especially with technique sensitive procedures such as adhesive restorations.

El objetivo del presente estudio in vitro fue visualizar la dentina para obtener un conocimiento completo de la naturaleza de ella lo que podría proporcionar información útil sobre el acondicionamiento del sustrato dentinario en el tratamiento de lesiones dentinarias. Se obtuvieron 49 terceros molares humanos extraídos y se prepararon para producir lesiones dentinales artificiales mediante desmineralización con ácido acético por 7 y 14 días, o ácido láctico por 7 días. Los dientes se dividieron en grupos y se trataron con NaOCl, pepsina, tripsina o ácido fosfórico. Para obtener información sobre la morfología de las superficies dentinarias tratadas, todas las muestras se visualizaron bajo un microscopio electrónico de barrido de emisión de campo de alta resolución. Con un gran aumento que alcanzó x50000, la dentina se visualizó claramente junto con sus componentes. Se demostró el efecto de varios enfoques de desmineralización y varios protocolos de tratamiento. Se discutió la relación entre los pasos del procedimiento de acondicionamiento y la subsiguiente fuerza de unión. Hasta donde sabemos, no hay imágenes claras previas de microscopio electrónico de barrido altamente ampliadas para la dentina y los componentes y constituyentes de la dentina con y sin diferentes tratamientos. El estudio in vitro actual sugiere la naturaleza compleja de la dentina como sustrato que debe tratarse con cuidado, especialmente en los procedimientos sensibles a la técnica, tal como las restauraciones adhesivas.

Efecto de diferentes condiciones y modos de aplicación sobre la fuerza de unión de los adhesivos a la dentinaEffect of different conditions and modes of application on bond strength of adhesives to dentine / Effect of different conditions and modes of application on bond strength of adhesives to dentine

Objective: To evaluate the microtensile bond strength in different dentine conditions (etched-E, non-etched-N, dry-D and wet-W) of a multimode adhesive (Scotchbond Universal-SU, 3M/ESPE) and a total etching adhesive (Ambar-AB, FGM) using a sonic device (Smart Sonic Device-SD, FGM). Material and methods: In this in vitro study, ninety six sound extracted human molars were divided into 12 groups (n=8) according to different dentine conditions and adhesive systems. Enamel was removed and the middle dentine surfaces were polished. Each adhesive system was applied according to the different dentine conditions, and composite resin blocks were incrementally built up and stored for 24 hours. Specimens were sectioned into sticks and bond strength data were analyzed with the Kruskal-Wallis test and Mann-Whitney U tests. Results: No effects of sonic application and were observed. In general, AB showed lower results compared to the SU. E and N conditions did not statistically affect the bond strength of SU groups. Dry dentine presented statistically superior bond strength values when compared to wet dentine for SU/E/SD group. Conclusion: Adhesion of dry dentine with multimode adhesive system may be superior to wet dentine with sonic application. The modes of application had no influence in bond strength of studied adhesives.

Objetivo: Evaluar la resistencia de la unión microtensil en diferentes condiciones de dentina (grabado-E, sin grabado-N, seco-D y húmedo-W) de un adhesivo multimodo (Scotchbond Universal-SU, 3M/ESPE) y un adhesivo de grabado total (Ambar-AB, FGM) utilizando un dispositivo sónico (Smart Sonic Device-SD, FGM). Material y Métodos: En este estudio in vitro, noventa y seis molares humanos extraídos sanos se dividieron en 12 grupos (n=8) de acuerdo con diferentes condiciones de dentina y sistemas adhesivos. Se eliminó el esmalte y se pulieron las superficies centrales de la dentina. Cada sistema adhesivo se aplicó de acuerdo con las diferentes condiciones de dentina, y los bloques de resina compuesta se acumularon de forma incremental y se almacenaron durante 24h. Las muestras se seccionaron en barras y los datos de resistencia de la unión se analizaron con la prueba de Kruskal-Wallis y la prueba de U de Mann-Whitney. Resultado: No se observaron efectos de la aplicación sónica. En general, AB mostró resultados más bajos en comparación con el SU. Las condiciones E y N no afectaron estadísticamente la fuerza de unión de los grupos SU. La dentina seca presentó valores de fuerza de adhesión estadísticamente superiores en comparación con la dentina húmeda para el grupo SU/E/SD. Conclusión: La adhesión de la dentina seca con un sistema adhesivo multimodo puede ser superior a la dentina húmeda con aplicación sónica. Los modos de aplicación no tuvieron influencia en la resistencia de la unión de los adhesivos estudiados.

Effects of thermal cycling on bonding properties of novel low-shrinkage resin adhesive / 华西口腔医学杂志

OBJECTIVES@#The current study aimed to investigate the bonding properties of a novel low-shrinkage resin adhesive containing expanding monomer and epoxy resin monomer after thermal cycling aging treatment.@*METHODS@#Expanding monomer of 3,9-diethyl-3,9-dimethylol-1,5,7,11-tetraoxaspiro-[5,5] undecane (DDTU) as an anti-shrinkage additive and unsaturated epoxy monomer of diallyl bisphenol A diglycidyl ether (DBDE) as a coupling agent were synthesized. A blend of DDTU and DBDE at a mass ratio of 1∶1, referred to as "UE", was added into the resin matrix at the mass fraction of 20% to prepare a novel low-shrinkage resin adhesive.Then, the methacrylate resin adhesive without UE was used as the blank control group, and a commercial resin adhesive system was selected as the commercial control group. Moreover, the resin-dentin bonding and micro-leakage testing specimens were prepared for the thermal cycling aging treatment. The bonding strength was tested, the fracture modes were calculated, the bonding fracture surface was observed by scanning electron microscope (SEM), and the dye penetration was used to evaluate the tooth-restoration marginal interface micro-leakage. All the data were analyzed statistically.@*RESULTS@#After aging, the dentin bonding strength of the experimental group was (19.20±1.03) MPa without a significant decrease (P>0.05), that of the blank control group was (11.22±1.48) MPa with a significant decrease (P<0.05) and that of the commercial control group was (19.16±1.68) MPa without a significant decrease (P>0.05). The interface fracture was observed as the main fracture mode in each group after thermal cycling by SEM. The fractured bonding surfaces of the experimental group often occurred on the top of the hybrid layer, whereas those of the blank and commercial control groups mostly occurred on the bottom of the hybrid layer. Micro-leakage rating counts of specimens before and after thermal cycling were as follows: the experimental group was primarily 0 grade, thereby indicating that a relatively ideal marginal sealing effect could be achieved (P>0.05); meanwhile, the blank control group was primarily 1 grade, and the penetration depth of dye significantly increased after thermal cycling (P<0.05); the commercial control group was primarily 0 grade without statistical difference before and after thermal cycling (P>0.05), while a significant difference was observed between the commercial control group and experimental group after thermal cycling (P<0.05).@*CONCLUSIONS@#The novel low-shrinkage resin adhesive containing 20%UE exhibited excellent bonding properties even after thermal cycling aging treatment, thereby showing a promising prospect for dental application.

Mutation of dentin sialophosphoprotein and hereditary malformations of dentin / 中华口腔医学杂志

The classification as well as the clinical manifestations of hereditary malformations of dentin are of great concern and have been deeply elucidated. The understanding of its genetic basis also increases progressively. Dentin sialophosphoprotein (DSPP) is the pathogenic gene of dentinogenesis imperfecta type Ⅱ, dentinogenesis imperfecta type Ⅲ and dentin dysplasia type Ⅱ. In this article, the classification of DSPP mutations as well as the resultant dysfunction of the mutant DSPP are summarized respectively and the corresponding clinical manifestations are analyzed. This work will provide a reference for the diagnosis and treatment of hereditary malformations of dentin.

Applications of collagen extrafibrillar demineralization in dentin bonding / 中华口腔医学杂志

The existing dentin bonding systems based on acid-etching technique lead to the loss of both extrafibrillar and intrafibrillar minerals from dentin collagen, causing excessive demineralization. Because resin monomers can not infiltrate the intrafibrillar spaces of demineralized collagen matrix, degradation of exposed collagen and resin hydrolysis subsequently occur within the hybrid layer, which seriously jeopardizing the longevity of resin-dentin bonding. Collagen extrafibrillar demineralization can effectively avoid the structural defects within the resin-dentin interface caused by acid-etching technique and improve the durability of resin-dentin bonding, by preserving intrafibrillar minerals and selectively demineralizing extrafibrillar dentin. The mechanism and research progress of collagen extrafibrillar demineralization in dentin bonding are reviewed in the paper.

Antibacterial effect of low-temperature plasma on Enterococcus faecalis in dentinal tubules in vitro / 北京大学学报(医学版)

OBJECTIVE@#To construct a model of Enterococcus faecalis (E. faecalis) infection in dentinal tubules by gradient centrifugation and to evaluate the antibacterial effect of low-temperature plasma on E. faecalis in dentinal tubules.@*METHODS@#Standard dentin blocks of 4 mm×4 mm×2 mm size were prepared from single root canal isolated teeth without caries, placed in the E. faecalis bacterial solution, centrifuged in gradient and incubated for 24 h to establish the model of dentinal tubule infection with E. faecalis. The twenty dentin blocks of were divided into five groups, low-temperature plasma jet treatment for 0, 5 and 10 min, calcium hydroxide paste sealing for 7 d and 2% chlorhexidine gel sealing for 7 d. Scanning electron microscopy and confocal laser scanning microscope were used to assess the infection in the dentinal tubules and the antibacterial effect of low-temperature plasma.@*RESULTS@#The results of scanning electron microscopy and confocal laser scanning microscopy showed that after 24 h of incubation by gradient centrifugation, E. faecalis could fully enter the dentinal tubules to a depth of more than 600μm indicating that this method was time-saving and efficient and could successfully construct a model of E. faecalis infection in dentinal tubules. Low-temperature plasma could enter the dentinal tubules and play a role, the structure of E. faecalis was still intact after 5 min of low-temperature plasma treatment, with no obvious damage, and after 10 min of low-temperature plasma treatment, the surface morphology of E. faecalis was crumpled and deformed, the cell wall was seriously collapsed, and the normal physiological morphology was damaged indicating that the majority of E. faecalis was killed in the dentinal tubules. The antibacterial effect of low-temperature plasma treatment for 10 min exceeded that of the calcium hydroxide paste sealing for 7 d and the 2% chlorhexidine gel sealing for 7 d. These two chemicals had difficulty entering deep into the dentinal tubules, and therefore only had a few of antibacterial effect on the bacterial biofilm on the root canal wall, and there was also no significant damage to the E. faecalis bacterial structure.@*CONCLUSION@#Gradient centrifugation could establish the model of E. faecalis dentin infection successfully. Low-temperature plasma treatment for 10 min could kill E. faecalis in dentinal tubules effectively, which is superior to the calcium hydroxide paste sealing for 7 d and the 2% chlorhexidine gel sealing for 7 d.

Effects of novel bioactive glasses on promoting remineralization of artificial dentin caries / 北京大学学报(医学版)

OBJECTIVE@#To investigate the effects of novel bioactive glasses (BG) including PSC with high phosphorus component and FBG with fluorine-doped element on promoting remineralization of artificial dentin caries.@*METHODS@#(1) BGs were used in this study as follows: PSC (10.8%P2O5-54.2%SiO2-35.0%CaO, mol.%) were synthesized using phytic acid as the phosphorus precursor through sol-gel method. FBG (6.1%P2O5-37.0%SiO2-53.9%CaO-3.0%CaF2, mol.%) and 45S5(6.0%P2O5-45.0%SiO2-24.5%CaO-24.5%Na2O, mol.%) were synthesized by traditional melt method. (2) The above BGs were soaked in simulated body fluid (SBF) for 24 hours. Then X-ray diffraction (XRD) was used to analyze the formation of hydroxyapatite (HA) crystals. (3) Prepared 1 mm thick dentin slices were soaked in 17% ethylene diamine tetraacetic acid (EDTA) for 1 week to demineralize the dentin. Then the dentin slices treated by BG were soaked in SBF for 1 week. Field emission scanning electron micro-scopy (FE-SEM) was used to observe the surface morphology of the dentin slices. (4) Four cavities were prepared to 1 mm depth in each 2 mm thick dentin slice, then were treated with lactic acid for 2 weeks to form the artificial dentin caries. Wax, mineral trioxide aggregate (MTA), PSC and FBG were used to fill four cavities as blank control group, MTA group, PSC group and FBG group respectively. Then the spe-cimens were soaked in SBF for 4 weeks. The changes of depth and density of demineralized dentin were analyzed using Micro-CT before filling and after 2 and 4 weeks filling.@*RESULTS@#(1) PSC and FBG promoted mineral formation on the surfaces of the demineralized dentin. And the speed was faster and crystallinity was higher in PSC group than the FBG and 45S5 groups. (2) The increased mineral density of artificial dentin caries in PSC group were (185.98 ± 55.66) mg/cm3 and (213.64 ± 36.01) mg/cm3 2 and 4 weeks after filling respectively, which were significantly higher than the control group [(20.38 ± 7.55) mg/cm3, P=0.006; (36.46 ± 10.79) mg/cm3, P=0.001]. At meanwhile, PSC group was also higher than MTA group [(57.29 ± 10.09) mg/cm3; (111.02 ± 22.06) mg/cm3], and it had statistical difference (P=0.015; P=0.006). The depth of remineralized dentin in PSC group were (40.0 ± 16.9) μm and (54.5 ± 17.8) μm 2 and 4 weeks respectively, which were also statistically different from the control group (P =0.010;P=0.001). There were no statistical differences between the control group and MTA group. The above effects of FBG group were between PSC and MTA.@*CONCLUSION@#PSC has advantages in the speed, quality and depth of mineral deposition in the demineralized layer of artificial dentin caries. It would be expected to be an ideal material to promote the remineralization of dentin caries.

Effect of Neodymium-Doped Yttrium Aluminum Garnet Laser Combined With Desensitizing Toothpaste on Dentinal Tubule Occlusion Against Acid Challenge / 中国医学科学院学报

Objective To assess the effects of different application sequences of neodymium-doped yttrium aluminum garnet(Nd∶YAG)laser and the desensitizing toothpaste containing stannous fluoride on dentinal tubule occlusion.Methods Twelve intact third molars freshly extracted from human were selected and prepared into dentin slices with a thickness of 0.8 mm.Each dentin slice was subdivided into four small slices,three of which were etched with 6% citric acid and randomly assigned to the following three groups(n=12):(1)control group:no treatment;(2)Nd∶YAG+toothbrushing(TB)group:first irradiated with Nd∶YAG laser and then brushed with desensitizing toothpaste;(3)TB+Nd∶YAG group:first brushed with desensitizing toothpaste and then irradiated with Nd∶YAG laser.The Nd∶YAG laser irradiation were carried out at 1 W,15 pulses/s,and the pulse width of 150 μs for 10 s(for a total of 6 cycles).After the above treatment,the 12 dentin slices from the Nd∶YAG+TB and TB+Nd∶YAG groups were randomly assigned to four subgroups(n=3)and subjected to acid etching in the Coca-Cola solution for 0,5,10,and 15 min.A scanning electron microscope was used to observe and photograph the dentin slices in each group,and eight single-blinded examiners scored the slices according to uniform criteria.The analysis of variance was carried out to compared the scores between groups.Results Before acid etching,the dentin tubule occlusion scores of the Nd∶YAG+TB and TB+Nd∶YAG groups were(4.83±0.09) scores and(3.85±0.66) scores,respectively,which had no significant difference between each other(P=0.0590)and were higher than that[(0.10±0.07)scores]of the control group(both P<0.0001).The dentin tubule occlusion scores of the Nd∶YAG+TB group after acid etching for 5,10,and 15 min were(4.33±0.60)scores,(4.27±0.24)scores,and(3.63±0.07)scores,respectively,which were not significantly different from those[(4.04±0.10)scores,(3.76±0.59)scores,and(3.17±0.29)scores,respectively]of the TB+Nd∶YAG group(all P>0.05).In the Nd∶YAG+TB subgroup,the dentin tubule occlusion score after acid etching for 15 min was significantly lower than that before acid etching(P=0.0011).In the TB+Nd∶YAG group,there was no statistically significant difference in the score between before and after acid etching(P>0.05).Conclusions Nd∶YAG laser irradiation with appropriate parameters combined with the use of desensitizing toothpaste could produce an excellent occluding effect on dentinal tubules regardless of the sequence.However,brushing with desensitizing toothpaste followed by Nd∶YAG laser irradiation produced more consistent dentin sealing after acid etching.

Análise de metodologias para avaliação da solubilidade do cimento à base de silicato de cálcio Bio-C Sealer / Analysis of methodologies for evaluating the solubility of calcium silicate-based sealer Bio-C Sealer

Introdução: Cimentos endodônticos à base de silicato de cálcio demonstram maior solubilidade em água destilada. Emprego de metodologias alternativas pode auxiliar em melhor compreensão sobre a solubilidade desses materiais. Objetivo: Avaliar o efeito da solução de imersão e do tipo de modelo experimental na solubilidade de cimento pronto para uso Bio-C Sealer. Material e método: Modelos circulares de polietileno ou dentina bovina (n = 16) foram confeccionados. Após inserção do cimento, os espécimes foram mantidos em estufa a 37 °C por 48 horas. Posteriormente, as amostras foram pesadas em balança de precisão para determinação da massa inicial. Na sequência, os espécimes foram imersos em 7,5 mL de água destilada (pH 6,5) ou PBS (pH 7,0) (n = 8) por 28 dias. Após isso, as amostras foram removidas das soluções e pesadas a cada 24 horas até a estabilização da massa final (0,001g). Corpos de prova confeccionados com Bio-C Sealer foram empregados como controle. A solubilidade foi avaliada de acordo com a diferença entre a massa inicial e final em porcentagem. Teste ANOVA Two-Way e teste post-hoc de Tukey foram realizados (α = 0,05). Resultado: Imersão em água destilada proporcionou maior solubilidade em comparação com PBS, independentemente do modelo experimental (p < 0,05). Corpos de prova apresentaram maior solubilidade, seguidos dos modelos de polietileno e dentina imersos em água destilada (p < 0,05). Não houve diferença entre os modelos experimentais imersos em PBS (p > 0,05). Conclusão: Bio-C Sealer apresenta solubilidade significativamente maior em água destilada do que em PBS em todas condições. Modelo experimental empregando dentina bovina e PBS como solução de imersão demonstra diminuir a perda de massa de Bio-C Sealer e pode ser uma alternativa valiosa para avaliar a solubilidade de cimentos biocerâmicos

Introduction: Calcium silicate-based sealers demonstrate greater solubility in distilled water. The use of alternative methodologies can help at better understanding the solubility of these materials. Objective: To evaluate the effect of the immersion solution and the type of experimental model on the solubility of readyto-use Bio-C Sealer. Material and method: Circular models of polyethylene or bovine dentin (n = 16) were made. After insertion of the sealer, the specimens were kept in an oven at 37°C and 95% humidity for 48h. Subsequently, the samples were weighed on a precision balance to determine the initial mass. Next, the specimens were immersed in 7.5 mL of distilled water (pH 6.5) or PBS (pH 7.0) (n = 8) for 28 days. After that, the samples were removed from the solutions and weighed every 24 hours until the final mass stabilized (0.001g). Test specimens made with Bio-C Sealer were used as a control. Solubility was evaluated according to the difference between the initial and final mass in percentage. Two-Way ANOVA test and Tukey post-hoc tests were performed (α=0.05). Result: Immersion in distilled water provided greater solubility compared to PBS regardless of the experimental model (p<0.05). The test specimens showed greater solubility, followed by polyethylene and dentin models immersed in distilled water (p<0.05). There was no difference between the experimental models immersed in PBS (p>0.05). Conclusion: Bio-C Sealer presents significantly greater solubility in distilled water than in PBS under all conditions. Experimental model using bovine dentin and PBS as an immersion solution demonstrates reduction in the mass loss of Bio-C Sealer and can be a valuable alternative for evaluating the solubility of bioceramic sealers

A new proposal for evaluating of the solubility of bioceramic materials in dentin tubes after immersion in PBS: a laboratory investigation / Nova proposta para avaliação da solubilidade de materiais biocerâmicos em tubos de dentina após imersão em PBS: um estudo laboratorial

Introdução: Materiais reparadores devem apresentar baixa solubilidade. Solução salina tamponada com fosfato (PBS) permite simular condição clínica e interação com dentina pode ser importante para correta avaliação da perda de massa de cimentos biocerâmicos. Objetivo: Avaliou o efeito da imersão em água destilada (AD) ou PBS na solubilidade de Bio-C Repair (BCR, Angelus) ou MTA Repair HP (MTAHP, Angelus) usando modelo de tubo de dentina. Material e método: Tubos de dentina bovina foram confeccionados com 4 mm de comprimento, 1,5 mm de diâmetro interno e 1 mm aproximadamente de espessura de parede. Os espécimes foram imersos em AD por 24h, posteriormente preenchidos com BCR ou MTAHP (n = 14) e armazenados em estufa a 37°C e umidade 95% por 24h. Após serem pesados em balança de precisão para determinação da massa inicial, os corpos de prova foram imersos em AD (pH 6,5) ou PBS (pH 7,0) (n = 7) por 28 dias. Tubos vazios também foram utilizados para o cálculo de perda de massa da dentina (n=4). Após esse período, os espécimes foram pesados até a estabilização da massa final (0,001g). A solubilidade de cada material foi avaliada. Testes estatísticos ANOVA e Tukey foram realizados (α=0,05). Resultado: BCR e MTAHP apresentaram ganho de massa em AD e perda de massa em PBS (p<0,05). Conclusão: A solução de imersão influencia a solubilidade de BCR e MTAHP usando modelo de tubo de dentina. Nova proposta metodológica poderá ser uma alternativa às normas ISO para testar a solubilidade de cimentos biocerâmicos

Introduction: Repair materials must have low solubility. Phosphate buffered saline (PBS) allows simulating clinical condition and interaction with dentin may be important for the correct evaluate of mass loss of bioceramic cements. Objective: To evaluate the effect of distilled water (DW), or PBS immersion on the solubility of Bio-C Repair (BCR, Angelus) or MTA Repair HP (MTAHP, Angelus) using a dentin tube model. Material and method: Bovine dentin tubes with a length of 4 mm, an internal diameter of 1.5 mm and walls thickness of approximately 1 mm were made. The specimens were immersed in DW for 24h, then filled with BCR or MTAHP (n = 14) and stored in an oven at 37°C and 95% humidity for 24h. After being weighed on a precision balance to determine the initial mass, the specimens were immersed in DW (pH 6.5) or PBS (pH 7.0) (n = 7) for 28 days. Empty tubes also were used for calculating the mass loss of the dentin (n=4). After this period, the specimens were weighed until stabilization of the final mass occurred (0.001g). The solubility of each material was evaluated. ANOVA and Tukey statistical tests were performed (α=0.05). Result: BCR and MTAHP showing gain of mass in DW and mass loss in PBS (p<0.05). Conclusion: The immersion solution influenced the solubility of BCR and MTAHP using dentin tube model. The new methodological proposal could be an alternative to ISO standards for testing the solubility of bioceramic cement

Oral Healthcare Services Delivered During COVID-19 Lockdown: A Report from Eastern Mediterranean Region

ABSTRACT Objective: To describe oral healthcare services administered during the lockdown in the Eastern Mediterranean region and to investigate the role of socio-professional characteristics of dental practitioners or their self-reported COVID-19 infection. Material and Methods: A questionnaire was distributed to dental practitioners in all healthcare sectors in Jordan, Egypt, and Saudi Arabia. Results: There was a total of 335 participants, with the majority being females (N=225, 67.2%) and general practitioners (N=202, 60.3%). Cellulitis was the most common emergency encountered (N=108). The most common urgent procedures were for pulpitis, abscesses, and pericoronitis (N=191, 130, and 95, respectively). Country-specific significant associations were pulpitis in Egypt and Jordan, broken symptomatic teeth in Jordan, and biopsy in Egypt (p<0.05). The Ministry of Health was significantly associated with the management of dental infections, avulsion, and orthodontic emergencies, while university hospitals were significantly associated with advanced restorative procedures (p<0.05). Male practitioners performed significantly more procedures, particularly surgical emergencies (p<0.05). Conclusion: Dental infections were the most common complaints among dental patients during lockdown. Countryand sector-specific dental procedures are detected. Male gender seems to play a determinant role in performing a higher number of procedures, particularly for surgical emergencies (AU).