Optimization of Diltiazem hydrochloride osmotic formulation using QBD approach

Abstract Diltiazem hydrochloride (DLH) is a calcium channel blocker useful for the treatment of angina pectoris, arrhythmia, and hypertension. DLH having a short half-life needs frequent administration for successful treatment but this poses a problem of poor patient compliance. These requirements are served by elementary osmotic pump tablets (EOP) based controlled-release (CR) systems. Quality by design (QbD) approach assists in screening various factors with subsequent assessment of critical parameters that can have a major impact on the scalability of EOP. Tablets were formulated using wet granulation method followed by osmotic coating. Factorial design based QbD strategy aided in defining the risk assessment of influential variables such as hydrophilic polymers and osmotic coat component on the in-vitro release kinetics of the designed EOP tablets. These formulated EOP systems followed zero-order kinetics, a characteristic feature of EOPs. EOP tablets were formulated applying a systematic QbD statistical approach. The formulated DLH EOP systems with improved concentration-independent behavior helped to address the challenges of IR formulation. Application of QbD strategy in ascertaining the scalability of DLH EOP formulation would help pharmaceutical industries in the translation of EOP based drug delivery systems from R&D to market.

Pharmacokinetics of diltiazem hydrochloride delay-onset sustained-release pellet capsules in healthy volunteers

The pharmacokinetics (PK) of ordinary tablets and sustained release capsules of diltiazem hydrochloride in human clinical trials had been studied. The PK of diltiazem hydrochloride delay-onset sustained-release pellet capsules, a new dosage form, has not been reported, although it is very important to clinical use. In this paper, we investigated the PK of diltiazem hydrochloride delay-onset sustained-release pellet capsules and the food influence in Chinese healthy volunteers. The PK parameters indicated that the diltiazem hydrochloride delay-onset sustained-release pellet capsules appeared marked characteristics of delayed and controlled release. An opened-label, randomized and parallel clinical trial was conducted in 36 Chinese healthy volunteers with single oral dose (90 mg, 180 mg or 270 mg) and a multiple oral dose (90 mg d-1×6 d) administration. The effect of food on the PK of one single oral dose (360 mg) was investigated in 24 healthy Chinese volunteers. Plasma diltiazem concentration was determined by reversed-phase high-performance liquid chromatography (RP-HPLC) and the main pharmacokinetic parameters were analyzed by PKSolver (Ver 2.0). All clinical studies were conducted in the Clinical Pharmacological Center (No. JDX1999064) of Xiangya Hospital Affiliated Central South University, China. The PK parameters suggested that the new formulation had marked characteristics of delayed and controlled release of diltiazem, and food intake did not alter significantly diltiazem pharmacokinetic parameters.

Embora a farmacocinética (PK) do cloridrato de diltiazem nas formas de comprimidos de liberação imediata e cápsulas de liberação modificada em ensaios clínicos já tenha sido relatada, a pesquisa da PK do cloridrato de diltiazem na forma de cápsulas com peletes de liberação retardada e sustentada ainda é muito importante. Neste trabalho, propusemos avaliar a farmacocinética do cloridrato de diltiazem administrado através desta nova forma farmacêutica em voluntários chineses sadios, assim como a influência da ingestão de alimentos neste perfil farmacocinético. Foi realizado um ensaio clínico aberto, randomizado e paralelo em 36 voluntários, que receberam dose oral única de 90 mg, 180 mg ou 270 mg e dose múltiplas (90 mg/d × 6 d) pela mesma via de administração. Para avaliar o efeito da ingestão de alimentos sobre a PK do diltiazem foi realizada a administração de dose única (360 mg) em 24 voluntários chineses sadios. A concentração plasmática do diltiazem foi determinada por Cromatografia Liquida de Alta Eficiência em fase reversa (CLAE-FR) e os principais parâmetros farmacocinéticos foram analisados através do emprego do software PKSolver (Ver 2.0). O ensaio de farmacocinética clínica foi conduzido na clínica Pharmacological Center (No.JDX1999064) do Hospital de Xiangya, Central South University, China. Os parâmetros PK obtidos indicaram que a nova formulação de cápsulas de liberação retardada e sustentada de cloridrato de diltiazem possue marcantes características de liberação retardada e controlada do fármaco.

Biodegradable microparticulate drug delivery system of diltiazem HCl

The efficacy of a drug in a specific application requires the maintenance of appropriate drug blood level concentration during a prolonged period of time. Controlled release delivery is available for many routes of administration and offers many advantages (as microparticles and nanoparticles) over immediate release delivery. These advantages include reduced dosing frequency, better therapeutic control, fewer side effects, and, consequently, these dosage forms are well accepted by patients. Advances in polymer material science, particle engineering design, manufacture, and nanotechnology have led the way to the introduction of several marketed controlled release products and several more are in pre-clinical and clinical development. The objective of this work is to prepare and evaluate diltiazem HCl loaded albumin microparticles using a factorial design. Albumin (natural polymer) microparticles were prepared by emulsion heat-stabilization method. Selected formulations were characterized for their entrapment efficiency, particle size, surface morphology, and release behavior. Analysis of variance for entrapment efficiency indicates that entrapment efficiency is best fitted to a response surface linear model. Surface morphology was studied by scanning electron microscopy. Scanning electron microscopy of the microparticles revealed a spherical, nonporous and uniform appearance, with a smooth surface. The geometric mean diameter of the microparticles was found to be 2-9 µm, which more than 75% were below 3.5 µm and drug incorporation efficiency of 59.74 to 72.48% (w/w). In vitro release profile for formulations containing diltiazem HCl loaded BSA microparticles with heat stabilization technique shows slow controlled the release of the drug up to 24 hours. The release pattern was biphasic, characterized by an initial burst effect followed by a slow release. All selected microparticles exhibited a prolonged release for almost 24 hours. On comparing regression-coefficient (r²) values for Hixson Crowel, Higuchi and Peppas kinetic models, different batches of microparticles showed Fickian, non-Fickian, and diffusion kinetics. The release mechanism was regulated by D:P ratio. From the statistical analysis it was observed that as the drug:polymer (D:P) ratio increased, there was a significant increase in the encapsulation efficiency. Based on the particle size, entrapment efficiency and physical appearance, DTM-3 formulations were selected for in vivo release study and stability study. The in vivo result of drug loaded microparticles showed preferential drug targeting to liver followed by lungs, kidneys and spleen. Stability studies showed that maximum drug content and closest in vitro release to initial data were found in the formulation stored at 4 ºC. In present study, diltiazem HCl loaded BSA microparticles were prepared and targeted to various organs to satisfactory level and were found to be stable at 4 ºC.

A eficácia terapêutica de um fármaco depende da manutenção de seu nível plasmático adequado em determinado intervalo de tempo. Nesse sentido, a liberação modificada de fármacos está disponível em muitas vias de administração e oferece muitas vantagens (como micropartículas e nanopartículas) quando comparada às formulações de liberação imediata. Essas vantagens incluem reduzida frequência da dosagem, melhor controle terapêutico e menos efeitos colaterais. Assim sendo, esses produtos apresentam maior aceitação pelos pacientes. Os avanços na ciência dos materiais, na engenharia das partículas, em manufatura e em nanotecnologia permitiram a introdução no mercado de vários produtos de liberação modificada e vários outros se encontram em desenvolvimento pré-clínico e clínico. O objetivo do presente trabalho foi preparar e avaliar o fármaco cloridrato de diltiazem associado a micropartículas de albumina utilizando planejamento fatorial. As micropartículas de albumina, um polímero natural, foram preparadas por método de emulsão empregando estabilização por calor. As formulações selecionadas foram caracterizadas no que se refere à sua eficiência de encapsulamento, tamanho médio de partículas, morfologia de superfície e perfil de liberação do fármaco. A análise de variância relativa à eficiência de encapsulamento indicou superfície de resposta linear. Com referência à morfologia superficial, essa foi avaliada empregando microscopia eletrônica de varredura. Essa análise revelou micropartículas esféricas, não porosas e de aparência uniforme, com superfície lisa. O diâmetro médio das micropartículas foi entre 2 e 9 µm, sendo que mais de 75% das micropartículas se apresentaram abaixo de 3,5 µm. Além disso, a eficiência de encapsulamento foi entre 59,74 e 72,48%. Quanto ao ensaio para avaliação do perfil de liberação in vitro do fármaco associado às micropartículas, as formulações apresentaram liberação lenta até 24 horas. O comportamento foi caracterizado por liberação inicial (efeito burst) seguida por liberação lenta. Todas as fórmulas selecionadas apresentaram liberação prolongada por aproximadamente 24 horas. Na comparação entre os valores de coeficientes de regressão (R²), os modelos propostos por Hixson Crowel, Higuchi e Peppas, para diferentes formulações de micropartículas, demonstraram cinética de liberação de acordo com modelo Fickiano e não-Fickiano. O mecanismo de liberação do fármaco foi regulado pela razão entre o fármaco e o polímero. A análise estatística revelou significativo aumento da eficiência de encapsulamento quando essa razão aumentou. As avaliações relativas à análise dimensional das micropartículas, à eficiência de encapsulamento do fármaco e à morfologia permitiram a seleção da formulação DTM-3 para os ensaios de liberação in vivo e para o estudo da estabilidade. O ensaio de liberação in vivo do fármaco associado às micropartículas demonstrou sítio-alvo preferencial no fígado, seguido pelos pulmões rins e baço. No presente estudo, as micropartículas de albumina contendo cloridrato de diltiazem foram adequadamente preparadas e orientadas satisfatoriamente para vários órgãos. Além disso, a formulação selecionada apresentou estabilidade físico-química a 4 ºC.

Formulation and in vitro evaluation of taste-masked oro-dispersible dosage form of diltiazem hydrochloride

Diltiazem hydrochloride is a calcium channel blocker generally indicated for the treatment of angina and hypertension, and it is extensively metabolized due to the hepatic metabolism. Formulation of diltiazem hydrochloride into an oro-dispersible dosage form can provide fast relief with higher bioavailability. The bitter taste of the drug should be masked to formulate it in a palatable form. In the present work, an attempt was made to mask the taste by complexation technique, with a formulation into an oro-dispersible dosage form, using superdisintegrants Doshion P544, crospovidone (CP) and sodium starch glycolate (SSG). The complexes of diltiazem hydrochloride with β-CD (1:1 molar ratio) were prepared by kneading, co-evaporation, co-grounding, freeze-drying and melting methods. Phase solubility showed stability constant 819.13M-1. Prepared inclusion complexes were evaluated for taste masking and characterized by I.R, XRD, DSC. Using the drug β-CD complex, oro-dispersible tablets were prepared and evaluated for hardness, friability, weight variation, thickness, disintegrating time (DT), dissolution rate and taste. Formulations with 4 percent Doshion, 8 percent CP and 4 percent SSG showed DT of 0.54, 0.35 and 1.23 minutes, respectively.

O cloridrato de diltiazem é bloqueador do canal de cálcio geralmente indicado para o tratamento de angina e de hipertensão e é extensamente biotransformado devido ao metabolismo hepático. A formulação do cloridrato de diltiazem em orodispersão pode prover rápida liberação com maior biodisponibilidade. O sabor amargo do fármaco deve ser mascarado para ser formulado em forma palatável. No presente trabalho tentou-se mascarar o sabor pela técnica de complexação, com uma orodispersão, usando superdesintegrantes, como Doshio P544, crospivodina (CP) e glicolato de amido sódico (SSG). Os complexos de cloridrato de diltiazem com β-CD (razão molar 1:1) foram preparados por mistura, coevaporação, comoagem, liofilização e métodos de fusão. A solubilidade de fase mostrou estabilidade constante de 819,13 M-1. Os complexos de inclusão preparados foram avaliados com relação ao mascaramento do sabor e caracterizados por IV, Difração de Raios X e DSC. Empregando-se o fármaco complexado com β-CD, prepararam-se comprimidos dispersíveis e avaliaram-se os mesmos quanto à dureza, friabilidade, variação de peso, espessura, tempo de desintegração (DT), taxa de dissolução e sabor. Formulações com 4 por cento de Doshion, 8 por cento de CP e 4 por cento de SSG mostraram DT de 0,54, 0,35 e 1,23 minutos, respectivamente.

Improved high performance liquid chromatographic analysis of diltiazem in human plasma

A simple high-performance liquid chromatographic method was developed for determination of diltiazem in human plasma. Diltiazem and the internal standard, verapamil, were extracted from plasma samples using mixture of n-hexane and diethyl ether. The mobile phase was 0.1M ammonium dihydrogen phosphate - acetonitrile [62:38 v/v]. Triethylamine [0.08% v/v in the mobile phase] was added before the pH was adjusted to 5.9 with 85% phosphoric acid. Analysis was run at a flow rate of 1.0 ml/min at a detection wavelength of 238 nm. The method was specific and sensitive with a detection limit of 2.5 ng/ml at a signal-to-noise ratio of 3:1. The limit of quantification was set at 5 ng/ml. The calibration curve was linear over a concentration range of 5-160 ng/ml. Mean recovery value of the extraction procedure was about 90%, while the within and between day coefficient of variation and percent error values of the assay method were less than 10%