Evaluation of chemical quality profile of Polygoni Multiflori Radix at different processing degrees based on its classic processing method "nine-steaming and nine-sun-curing" / 中国中药杂志

Based on the ancient method of nine-steaming and nine-sun-curing,the chemical composition changes and quality profiles in different processes of Polygoni Multiflori Radix were studied. Their contents of stilbene glycoside,anthraquinones and polysaccharides were determined by nine-steaming and nine-sun-curing with black bean juice and pharmacopoeia method. HPLC chemical fingerprints were established,and orthogonal partial least squares-discriminant analysis( OPLS-DA) was performed on different processed products using SIMCA 14. 1 software to evaluate the quality difference between samples. The results of content determination show that,with the increase of the number of processing and steaming times,the stilbene glycoside and the combined anthraquinone showed a decreasing trend,and the free anthraquinone,total anthraquinone and polysaccharide showed an upward trend in the different preparations of Polygoni Multiflori Radix and Pharmacopoeia. Six-steamed and six-sun-cured products can be used as the finishing point for the classic steaming. Fingerprint results showed that there were significant differences in chemical composition in Polygoni Multiflori Radix at different processing processes. It can be identified stilbene glycoside( peak 13),emodin( peak 21),and physcion( peak 24). By comparing the relative peak areas of the 26 chromatographic peaks in the sample after normalization( the reference is peak 7),it was found that the relative peak areas of 12 peaks in the processed products were higher than the raw products,13 peaks were reduced; according to statistical analysis of OPLS-DA,Polygoni Multiflori Radix at different processing degrees was further divided into three categories,sample S1 was class I,S2-S5 were class Ⅱ,and S6-S11 were class Ⅲ． And 8 peaks with the VIP value higher than 1. 0 were peak 13,21,4,3,11,14,5,and 24 in order. The eight chemical components were the main components to distinguish the difference between Polygoni Multiflori Radix in the process of nine-steaming and nine-sun-curing,suggesting that it was rational to use stilbene glycoside,emodin and emodin methyl ether as quality control indicators of Polygoni Multiflori Radix. The method established in this experiment conformed to the methodological verification requirements,established a method of multi-component content determination combined with fingerprint,and clarified that six-steaming and six-sun-curing was used as an improved classical processing technology,and more clearly defined the whole dynamic change of chemical composition in Polygoni Multiflori Radix by nine-steaming and ninesun-curing process. It provides a basis for the chemical quality evaluation model about different processed products of Polygoni Multiflori Radix.

High temperature and UV-C treatments affect stilbenoid accumulation and related gene expression levels in Gnetum parvifolium

Background: Gnetum parvifolium stems and roots have been used for a long time in traditional Chinese medicines. Stilbenes are bioactive compounds present in G. parvifolium plants, and they possess antioxidative and anticancer properties. However, little is known about the responses of G. parvifolium stilbene biosynthetic pathways to stress conditions. Therefore, we investigated stilbene biosynthesis, including the expression of relevant genes, in G. parvifolium exposed to high-temperature and ultraviolet-C treatments. Results: High temperatures did not influence the accumulation of total stilbenes in stems but decreased stilbene concentrations in roots at 3 h, with a subsequent restoration to control levels. In contrast, ultraviolet irradiation induced the accumulation of total stilbenes in stems but not in roots. We also observed that high temperatures inhibited the production of resveratrol and piceatannol in G. parvifolium stems and roots, whereas ultraviolet treatments initially inhibited their accumulation (up to 6 h) but induced their production at later time points. Analyses of specific genes (i.e., PAL, C4H, 4CL, STS, and CYP) revealed that their expression levels generally increased in stress-treated stems and roots, although there was some variability in the expression profiles during treatments. Conclusions: Our results indicated that high temperatures and ultraviolet irradiation differentially affect the biosynthesis of specific stilbenes in G. parvifolium stems and roots. Therefore, cultivating G. parvifolium seedlings under optimal stress conditions may increase the biosynthesis of specific stilbene compounds.

Experimental benznidazole treatment of Trypanosoma cruzi II strains isolated from children of the Jequitinhonha Valley, Minas Gerais, Brazil, with Chagas disease

Trypanosoma cruzi strains from distinct geographic areas show differences in drug resistance and association between parasites genetic and treatment response has been observed. Considering that benznidazole (BZ) can reduce the parasite burden and tissues damage, even in not cured animals and individuals, the goal is to assess the drug response to BZ of T. cruzi II strains isolated from children of the Jequitinhonha Valley, state of Minas Gerais, Brazil, before treatment. Mice infected and treated with BZ in both phases of infection were compared with the untreated and evaluated by fresh blood examination, haemoculture, polymerase chain reaction, conventional (ELISA) and non-conventional (FC-ALTA) serologies. In mice treated in the acute phase, a significant decrease in parasitaemia was observed for all strains. Positive parasitological and/or serological tests in animals treated during the acute and chronic (95.1-100%) phases showed that most of the strains were BZ resistant. However, beneficial effect was demonstrated because significant reduction (p < 0.05%) and/or suppression of parasitaemia was observed in mice infected with all strains (acute phase), associated to reduction/elimination of inflammation and fibrosis for two/eight strains. BZ offered some benefit, even in not cured animals, what suggest that BZ use may be recommended at least for recent chronic infection of the studied region.

Induction of secondary metabolite production by UV-C radiation in Vitis vinifera L. Öküzgözü callus cultures

BACKGROUND: The aim of the present work was to examine the role of UV-C irradiation on the production of secondary metabolites (total phenolic, total flavanols, total flavonols, catechin, ferulic acid and trans-resveratrol in phenolic compounds and α-, ß-, γ- δ-tocopherols) in callus cultures. Studies on the effects of UV-C treatment on callus culture are seldom and generally focused on UV-B. However UV-C radiation play an important role in accumule secondary metabolites. RESULTS: In this study, callus cultures from Öküzgözü grape cultivar were initiated from leaf petiole explants. Calli formed after 6 weeks on the medium supplemented with 0.5 mg L-1 benzylaminopurine (BA), 0.5 mg L-1 indole acetic acid (IAA) on B5 media. Callus tissues were exposed to UV-C irradiation at 10, 20 and 30 cm distances from the UV source for 5 and 10 minutes and samples were collected at hours 0, 24 and 48. CONCLUSIONS: The greatest total phenolic content (155.14 mg 100 g-1) was detected in calli exposed to UV-C for 5 min from 30 cm distance and sampled after 24 h. 24 h and 48 h incubation times, 30 cm and 5 min were the most appropriate combination of UV-C application in total flavanol content. Maximum total flavonol content (7.12 mg 100 g-1) was obtained on 0 h, 5 min and 20 cm combination. The highest (+)- catechin accumulation (8.89 mg g-1) was found in calli with 10 min UV-C application from 30 cm distance and sampled after 48 h. Ferulic acid content increased 6 fold in Öküzgözü callus cultures (31.37 µg g-1) compared to the control group. The greatest trans-resveratrol content (8.43 µg g-1) was detected in calli exposed to UV-C for 5 min from 30 cm distance and sampled after 24 h. The highest α-tocopherol concentration was found in calli exposed to UV-C for 10 min from 30 cm distance and sampled after 24 h. As a conclusion, it was showed that UV-C radiation had remarkable promoting effects on the accumulation of secondary metabolites in the calli of Öküzgözü grape cultivar.

The effects of cadmium chloride on secondary metabolite production in Vitis vinifera cv. cell suspension cultures

BACKGROUND: Plant secondary metabolites are possess several biological activities such as anti-mutagenic, anti-carcinogenic, anti-aging, etc. Cell suspension culture is one of the most effective systems to produce secondary metabolites. It is possible to increase the phenolic compounds and tocopherols by using cell suspensions. Studies on tocopherols production by cell suspension cultures are seldom and generally focused on seed oil plants. Although fresh grape, grape seed, pomace and grape seed oil had tocopherols, with our best knowledge, there is no research on tocopherol accumulation in the grape cell suspension cultures. In this study, it was aimed to determine the effects of cadmium chloride treatments on secondary metabolite production in cell suspension cultures of grapevine. Cell suspensions initiated from callus belonging to petiole tissue was used as a plant material. Cadmium chloride was applied to cell suspension cultures in different concentration (1.0 mM and 1.5 mM) to enhance secondary metabolite (total phenolics, total flavanols, total flavonols, trans-resveratrol, and α-, ß-, γ- δ-tocopherols) production. Cells were harvested at two days intervals until the 6th day of cultures. Amounts of total phenolics, total flavanols and total flavonols; trans-resveratrol and tocopherols (α-, ß-, γ- and δ-tocopherols) and dry cell weights were determined in the harvested cells. RESULTS: Phenolic contents were significantly affected by the sampling time and cadmium concentrations. The highest values of total phenolic (168.82 mg/100 g), total flavanol (15.94 mg/100 g), total flavonol (14.73 mg/100 g) and trans-resveratrol (490.76 µg/100 g) were found in cells treated with 1.0 mM CdCl2 and harvested at day 2. Contents of tocopherols in the cells cultured in the presence of 1.0 mM CdCl2 gradually increased during the culture period and the highest values of α, ß and γ tocopherols (145.61, 25.52 and 18.56 µg/100 g) were detected in the cell cultures collected at day 6. CONCLUSIONS: As a conclusion, secondary metabolite contents were increased by cadmium chloride application and sampling time, while dry cell weights was reduced by cadmium chloride treatments.