ABSTRACT
SUMMARY: This study collected 3D models of the left and right feet from 317 Chinese youth (155 females and 162 males) under half weight-bearing and no weight-bearing conditions. Thirteen dimensions and one angle were taken for each sample. By measuring 13 foot dimensions and 1 angle, this study comprehensively investigated the differences in foot shape between genders and the bilateral differences, as well as the foot shape differences under different conditions. The results showed that regardless of the condition, male foot dimensions were significantly larger than those of females. However, female foot shape was not simply a scaled-down version of male foot shape. On the contrary, the average angle of female feet was greater than that of males under both conditions, indicating a higher prevalence of hallux valgus in females. Both males and females exhibited significant correlation in foot dimensions between the left and right feet, with minimal differences. Under the half weight-bearing condition, the average foot length, width, and circumference were significantly larger than the corresponding measurements under the no weight-bearing condition, while the average height and angle were significantly smaller. Therefore, when designing footwear and foot-related medical rehabilitation aids, it is important to consider foot shape and dimensions under different conditions as a reference. The results of this study provide manufacturers of foot- related products with more detailed data support and are of significant value to the field of medical foot morphology research.
Este estudio recolectó modelos 3D de los pies izquierdo y derecho de 317 jóvenes chinos (155 mujeres y 162 hombres) en condiciones de carga media de peso y sin carga de peso. Para cada muestra se tomaron trece dimensiones y un ángulo. Al medir 13 dimensiones del pie y 1 ángulo, se investigó exhaustivamente las diferencias en la forma del pie entre ambos sexos y sus diferencias bilaterales, así como las diferencias en la forma del pie en diferentes condiciones. Los resultados mostraron que, independientemente de la condición, las dimensiones del pie de los hombres, estos eran significativamente más grandes que los de las mujeres. Sin embargo, la forma del pie femenino no era simplemente una versión reducida de la forma del pie masculino. Por el contrario, el ángulo promedio de los pies de las mujeres fue mayor que el de los hombres en ambas condiciones, lo que indica una mayor prevalencia de hallux valgus en las mujeres. Tanto hombres como mujeres exhibieron una correlación significativa en las dimensiones del pie, entre el pie izquierdo y el derecho, con diferencias mínimas. Bajo la condición de medio soporte de peso, la longitud, el ancho y la circunferencia promedio del pie fueron significativamente mayores que las medidas correspondientes bajo la condición sin soporte de peso, mientras que la altura y el ángulo promedio fueron significativamente más pequeños. Por lo tanto, al diseñar calzado y dispositivos médicos de rehabilitación relacionados con los pies, es importante tener en consideración la forma y las dimensiones del pie en diferentes condiciones como referencia. Los resultados de este estudio, brindan a los fabricantes de productos relacionados con los pies un soporte de datos más detallado y son de gran valor para el campo de la investigación médica de la morfología del pie.
Subject(s)
Humans , Male , Female , Adolescent , Adult , Young Adult , Anthropometry , Weight-Bearing , Foot/anatomy & histology , Ergonomics , Printing, Three-DimensionalABSTRACT
A novel structural dynamics test method and device were designed to test the biomechanical effects of dynamic axial loading on knee cartilage and meniscus. Firstly, the maximum acceleration signal-to-noise ratio of the experimental device was calculated by applying axial dynamic load to the experimental device under unloaded condition with different force hammers. Then the experimental samples were divided into non-specimen group (no specimen loaded), sham specimen group (loaded with polypropylene samples) and bovine knee joint specimen group (loaded with bovine knee joint samples) for testing. The test results show that the experimental device and method can provide stable axial dynamic load, and the experimental results have good repeatability. The final results confirm that the dynamic characteristics of experimental samples can be distinguished effectively by this device. The experimental method proposed in this study provides a new way to further study the biomechanical mechanism of knee joint structural response under axial dynamic load.
Subject(s)
Animals , Cattle , Biomechanical Phenomena , Knee Joint/physiology , Meniscus , Mechanical Phenomena , Weight-BearingABSTRACT
OBJECTIVE@#To investigate the effectiveness of osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation in the treatment of tibial plateau fractures involving posterolateral column collapse.@*METHODS@#A clinical data of 23 patients with tibial plateau fractures involving posterolateral column collapse, who had undergone osteotomy of non-core weight-bearing area of the lateral tibial plateau, reduction, and internal fixation between January 2015 and June 2021, was retrospectively analyzed. There were 14 males and 9 females with an average age of 42.6 years ranging from 26 to 62 years. The causes of injury included traffic accident in 16 cases, falling from height in 5 cases, and other injuries in 2 cases. According to Schatzker classification, there were 15 cases of type Ⅴ and 8 cases of type Ⅵ. The time from injury to operation was 4-8 days with an average of 5.9 days. The operation time, intraoperative blood loss, fracture healing time, and complications were recorded. The depth of articular surface collapse of posterolateral column and posterior inclination angle (PSA) of the tibial plateau were compared before operation and at 2 days and 6 months after operation; fracture reduction of tibial plateau fracture was evaluated by Rasmussen anatomic score. The recovery of knee function was evaluated by Hospital for Special Surgery (HSS) score at 2 days and 6 months after operation.@*RESULTS@#All 23 patients were completed the operation successfully. The operation time was 120-195 minutes, with an average of 152.8 minutes; the intraoperative blood loss was 50-175 mL, with an average of 109.5 mL. All patients were followed up 12-24 months, with an average of 16.7 months. One patient had superficial wound infection after operation, and the incision healed after dressing change; primary healing of incision of other patients was obtained. The fracture healing time was 12-18 weeks, with an average of 13.7 weeks. No failure of internal fixation, varus and valgus deformity of the knee joint, and instability of the knee joint was found at last follow-up. One patient developed joint stiffness and the range of motion of the knee joint was 10°-100°; the range of motion of the knee joint of other patients was 0°-125°. At 2 days and 6 months after operation, the depth of articular surface collapse of posterolateral column, PSA, and Rasmussen anatomic scores significantly improved when compared with those before operation ( P<0.05). There was no significant difference between the two postoperative time points ( P>0.05). The HSS score at 6 months after operation was significantly higher than that at 2 days after operation ( P<0.05).@*CONCLUSION@#For tibial plateau fractures involving posterolateral column collapse, reduction and internal fixation through osteotomy of non-core weight-bearing area of the lateral tibial plateau has the advantages of fully expose the posterolateral column fragment, good articular surface reduction, sufficient bone grafting, and fewer postoperative complications. It is beneficial to restore knee joint function and can be widely used in clinic.
Subject(s)
Male , Female , Humans , Adult , Retrospective Studies , Blood Loss, Surgical , Tibial Plateau Fractures , Treatment Outcome , Bone Plates , Tibial Fractures/surgery , Knee Joint , Fracture Fixation, Internal , Osteotomy , Weight-BearingABSTRACT
Background: Tooth extraction socket in the aesthetic area is a major indication for immediate implant placement greatly improving patient satisfaction and preserving the alveolar ridge. However, the effect of non-axial force on the peri-implant bone with subsequent early implant failure remains unclear. Objective:Evaluate the prognosis of tilted implants immediately placed and restored with angled abutments in comparison to straight implants restored with straight abutments in the esthetic area (anterior or premolars) using computer-aided surgical guides. Material and methods: Badly decayed non-restorable teeth in the aesthetic zone (anterior or premolars) were extracted atraumatically. Immediately after guided implant insertion, the abutments were adjusted and placed according to the allocation group (0, 15, or 25-degree angle) then a temporary crown was performed out of occlusion in centric and eccentric relation. Early implant failure was assessed at three and six months. Results:There was no statistically significant difference between the two groups (P=0.305). Straight and angled abutment groups showed 6 (14.3%) and 8 (20%) failed cases, respectively. The post-hoc subgroup analysis showed no statistically significant difference between angle 15 and angle 25 degree groups where (P=0.686) or between Anterior and Premolar groups (P=0.853). Conclusion: There was no statistically significant difference in the failure rate when comparing angled to straight immediately placed & restored implants. This applies to both anterior and premolar implants
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Prognosis , Tooth Extraction , Weight-Bearing , Dental Restoration Failure , Dental Implantation , Immediate Dental Implant LoadingABSTRACT
Objetive: To compare the stresses and deformations generated on the surrounding bone of the zygomatic implants when using an intra sinusal and extra-maxillary approach, through the finite element method. Material and Methods: Computer aided designs (CADs) were constructed using SolidWorks Software of a skull with bone resorption to be rehabilitated through a fixed hybrid prosthesis using two zygomatic and two conventional straight implants. For the boundary conditions (load conditions), symmetry in the sagittal plane was assumed and that all the materials were isotropic, homogeneous and linearly elastic. Two zygomatic implantation techniques were simulated: intra sinusal (Is) and extra maxillary (Em). Vertical and lateral loads of 150 N and 50 N were applied to the finite element models to obtain Von Mises equivalent stress and strain (displacement). Results: The average measurement of the Von Mises stress (MPa) recorded were as follows: Approach of the implant body (Is: 0.24- Em: 0.28,) effort of implant body with vertical load: Is: 0.69 - Em: 0.96; effort of peri-implant surface under horizontal load: Is: 2.11 - Em: 0.94. Average displacement under vertical load of peri-implant surface Is: 0.35 - Em: 0.40, and of implant body Is: 1.34 - Em: 2.04. Average total deformation in approach Is: 2.23 mm - Em: 0.80mm, and average total deformation in the implant body under horizontal load was Is: 0.14 - Em: 0.21. Conclusion: The results of this study indicate that despite the differences that occurred in both stress and strain (displacement) between the intra-sinus and extra-maxillary approaches, the static strength of the bone, which is approximately 150 MPa in tension and 250 MPa in compression was not exceeded. Considering the limitations of finite element analysis, there seems to be no biomechanical reason to choose one approach over the other.
Objetivo: Comparar por el método de elementos finitos los esfuerzos y deformaciones generados sobre el hueso circundante de implantes cigomáticos tratados con un abordaje intra sinusal y extra maxilar. Material y Métodos: Se construyeron los diseños asistidos por computadora (CAD) utilizando el Software SolidWorks de un cráneo con una reabsorción ósea para ser rehabilitado, a través de una prótesis híbrida fija, mediante dos implantes cigomáticos y dos rectos convencionales. Para las condiciones de frontera (condiciones de carga) se asumió simetría en el plano sagital y que todos los materiales eran isotrópicos, homogéneos y linealmente elásticos. Se simularon dos técnicas de implantación cigomática: una intra sinusal (Is) y otra extra maxilar (Em). Se aplicaron cargas verticales y laterales de 150 N y 50 N a los modelos de elementos finitos para obtener el esfuerzo equivalente de Von mises y la deformación (desplazamiento). Resultados: La medición promedio del esfuerzo de Von Mises (MPa) registró: abordaje del cuerpo de implante (Is: 0.24-Em: 0.28) esfuerzo del cuerpo de implante con carga vertical: (Is:0.69 Em: 0.96); esfuerzo de la superficie peri implantar ante carga horizontal (lateral):( Is:2.11 Em:0.94). Desplazamiento promedio ante carga vertical de la superficie peri implantar (Is:0.35 Em:0.40) y del cuerpo del implante (Is:1.34 Em:2.04). Deformación total promedio en mm en abordaje (Is: 2.23 Em:0.80) y deformación total promedio en el cuerpo del implante ante carga horizontal (Is:0.14 Em:0.21). Conclusión: Los resultados de este estudio indican que a pesar de las diferencias que se presentaron tanto en el esfuerzo como en la deformación (desplazamiento) entre los abordajes intra sinusal y extra maxilar, la resistencia estática del hueso, que es de aproximadamente 150 MPa en tensión y 250 MPa en compresión no se superó. Considerando las limitaciones de los AEF, parece no haber razones biomecánicas para elegir uno u otro enfoque.
Subject(s)
Humans , Dental Implants , Finite Element Analysis , Maxillary Sinus/physiology , Zygoma/surgery , Jaw, Edentulous, Partially/rehabilitation , Weight-Bearing , Computer-Aided DesignABSTRACT
Abstract Tibial plateau fractures are a risk to the functional integrity of the knee, affecting the axial alignment and capable of leading to pain and disability of the individual. Early weight bearing and joint mobilization can prevent these functional deficits. the goal of the present study was to conduct a systematic review of the literature about studies that quote the beginning, evolution, and progression criteria for weight-bearing in postoperative period of tibial plateau fractures. We selected articles published in the last 12 years, in Portuguese and English, that described the time of onset and progression of weight-bearing, considering the severity of the fracture. Thirty-six articles were selected. There is no consensus in the literature as to the beginning and evolution of weight-bearing in the postoperative period of tibial plateau fractures; however, a relationship between the severity of the fracture and the fixation method has been observed.
Resumo As fraturas do planalto tibial constituem risco à integridade funcional do joelho, afetando o alinhamento axial e podendo levar à dor e à incapacidade do indivíduo. O suporte de carga e a mobilização articular precoce podem prevenir esses déficits e acelerar o processo de reabilitação. O objetivo do presente trabalho foi realizar uma revisão da literatura sobre estudos que citam o início, evolução e critérios de progressão do suporte de carga no pós-operatório das fraturas de planalto tibial. Foram selecionados artigos publicados nos últimos 12 anos, nos idiomas português e inglês, que descrevessem o tempo de início e progressão do suporte de carga, considerando a gravidade da fratura. Foram selecionados 36 artigos na literatura. Não há consenso na literatura quanto ao início e evolução do suporte de carga no pós-operatório das fraturas do planalto tibial. Contudo, observa-se relação entre a gravidade da fratura e o tempo de início da carga.
Subject(s)
Pain , Rehabilitation , Tibial Fractures , Physical Therapy Modalities , Weight-Bearing , Fractures, BoneABSTRACT
Abstract Objective To analyze a series of cases of complex fractures of the sacrum with spinopelvic dissociation surgically treated with iliolumbar fixation, and to review the existing medical literature. Methods For the analysis, the medical records of the cases operated using the Schildhauer et al technique for fixation were retrospectively evaluated, and followed up for at least 12 months. The functional results were assessed using the visual analog scale (VAS) for pain and the Oswestry disability index, version 2.0. The data were compared with those of the existing medical literature. Results Six cases were analyzed, four of which evolved with moderate disability, one, with minimal disability, and one, with severe disability. Three cases that presented neurological deficits obtained significant improvement. Only one case evolved with pulmonary thromboembolic complications. Conclusion The Schildhauer et al technique is an efficient technique for the fixation of complex sacral fractures with spinopelvic dissociation. The patients evolved with good functional results. Early weight-bearing has been shown to be safe with the use of this treatment.
Resumo Objetivo Analisar uma série de casos de fraturas complexas do sacro com dissociação espinopélvica tratados cirurgicamente com fixação iliolombar, e revisar a literatura médica existente. Métodos Para a análise, foram avaliados retrospectivamente os prontuários médicos de casos operados utilizando a técnica de Schildhauer et al para fixação. O período de acompanhamento foi de pelo menos 12 meses. Os resultados funcionais foram avaliados por meio da escala visual analógica (EVA) de dor e do índice de incapacidade de Oswestry, versão 2.0. Os dados foram comparados com os da literatura médica existente. Resultados Seis casos foram analisados, sendo que quatro evoluíram com incapacidade moderada, um, com incapacidade mínima, e um, com incapacidade grave. Três casos que apresentavam déficit neurológico obtiveram melhora significativa. Apenas um caso evoluiu com complicação tromboembólica pulmonar. Conclusão A técnica de Schildhauer et al é eficiente para a fixação de fraturas complexas de sacro com dissociação espinopélvica. Os pacientes evoluíram com bons resultados funcionais. A liberação precoce de sustentação de carga demonstrou-se segura com o uso deste tratamento.
Subject(s)
Humans , Male , Female , Adult , Middle Aged , Pain , Sacrum , Sacrum/surgery , Spinal Injuries , Medical Records , Weight-Bearing , Dissociative Disorders , Fractures, BoneABSTRACT
The intensive agricultural machinery traffic to which soils under coffee crops are exposed may cause significant changes in soil structure. The goals of this study were to: a) characterize the spatial variability of precompression stress (σp) and volumetric water content (θ) of a Red-Yellow Latosol (Oxisol) and determine their spatially dependent structures using ordinary kriging semivariograms; b) using this date to construct a load-bearing capacity (LBC) map for the site, identifying the depth with higher ; and c) use the map as a decision support tool regarding agricultural machinery logistic management in coffee plantations. The research was conducted on an experimental farm of the Agricultural Research Company of Minas Gerais (Epamig), Patrocinio, MG, on a clayey Oxisol. Samples were collected from 2.0 × 1.5 m sampling pits at intersections of a rectangular 40 × 150 m grid, totaling 28 sampling points. The soil samples were collected with metal rings (0.0254 m in height and 0.0630 m in diameter) using an Uhland sampler. Sampling at each pit was at 3 layers: 0.000.03 m, 0.100.13 m, and 0.250.28 m, and seven samples arranged in a matrix form were collected at each layer, totaling 588 samples. The σp and θ showed a spatially dependent structure. The depth of 0.000.03 m showed higher LBC, indicating that this depth was more compacted compared to other depths. Based on the σp maps, the tractor and the combine should not traffic into the areas at water content of 0.45 m3 m-3, because the soil has a LBC of 200 kPa. If this condition is not respected, additional compaction will occur. Tractor traffic is permissible when the water content reaches values less than 0.36 m3 m-3, whereas for combine traffic, the water content values must be less than 0.30 m3 m-3.
O tráfego intenso de máquinas agrícolas sobre solos cultivados com cafeeiro pode causar alterações significativas na estrutura do solo. Os objetivos deste estudo foram: a) avaliar e identificar a variabilidade espacial da pressão de preconsolidação (σp) e a umidade volumétrica (θ) de um Latossolo Vermelho-Amarelo (LVA) e determinar a estrutura de dependência espacial através de semivariogramas utilizando a krigagem ordinária; b) verificar no mapa, a profundidade com maior capacidade de suporte de carga (CSC) do solo ; c) dar suporte a tomada de decisão no manejo do maquinário agrícola da cultura cafeeira e utilizar esses mapas para a logística de manejo de trafego de máquinas. O experimento foi conduzido num LVA textura muito argilosa na Fazenda da Epamig (Empresa de Pesquisa Agropecuária de Minas Gerais), em Patrocínio-MG. A amostragem foi realizada numa malha retangular (150 m x 40 m), onde foram coletadas amostras indeformadas em anéis metálicos de 0,0254 m de altura por 0,0630 m de diâmetro com auxílio do amostrador tipo Uhland em 28 trincheiras. Cada trincheira possui três degraus que correspondem às profundidades de (0.00-0.03; 0.10-0.13 e 0.25-0.28 m) e as dimensões dos degraus foram de 2,0 x 1,5 m, coletaram-se sete amostras (disposta em forma matricial) para cada degrau, totalizando 588 amostras. A σp e θ apresentaram estrutura de dependência espacial. A profundidade de 0.00-0.03m apresentou maior CSC indicando que esta profundidade está mais compactada em relação as demais profundidades. Com base nos mapas da σp, o trator e a colhedora não devem trafegar na área para umidade volumétrica igual a 0.45 m3 m-3, pois o solo possui CSC de 200 kPa. Se essa condição for desrespeitada, a compactação adicional poderá ocorrer. Para o tráfego do trator, deve-se esperar por um período, para que a θ atinja um valor menor que 0.36 m3 m-3, enquanto que para o tráfego da colhedora deve-se esperar a θ atingir valor menor que 0.30 m3 m-3.
Subject(s)
Soil , Solid Waste Compaction , Weight-Bearing , CoffeeABSTRACT
RESUMO O objetivo deste estudo foi verificar se a formação do arco longitudinal do pé interfere na distribuição da pressão plantar e na flexibilidade dos músculos posteriores da coxa. O método de estudo foi transversal e as impressões plantares foram obtidas usando o plantígrafo e analisadas segundo o método Viladot. A distribuição plantar e a flexibilidade foram avaliadas pela baropodometria e pelo banco de Wells, respectivamente. Foi observado que crianças com pés cavos apresentam maior flexibilidade quando comparadas às que têm o pé normal (p=0,02); e também que pés cavos apresentam maior pressão, ou seja, maior sobrecarga em calcâneo quando comparados àqueles com o arco plantar normal (p=0,02 membro inferior direito e p=0,03 membro inferior esquerdo). A avaliação do arco longitudinal medial mostra que crianças com pés cavos apresentam maior flexibilidade dos músculos posteriores de membro inferior. Os pés cavos também estão associados com maior descarga de peso em região de calcâneo.
RESUMEN El objetivo de este estudio fue verificar si la formación del arco longitudinal del pie interfiere con la distribución de la presión plantar y la flexibilidad de los músculos posteriores del muslo. El método de estudio fue transversal y las huellas plantar se obtuvieron utilizando el plantigraph y se analizaron según el método de Viladot. La distribución plantar y la flexibilidad se evaluaron mediante baropodometría y el banco de Wells, respectivamente. Se observó que los niños con pies huecos tienen mayor flexibilidad en comparación con aquellos con pies normales (p=0,02); y también que los pies huecos tienen una mayor presión, es decir, una mayor sobrecarga del talón en comparación con aquellos con arco plantar normal (p=0,02 miembro inferior derecho y p=0,03 miembro inferior izquierdo). La evaluación del arco longitudinal medial muestra que los niños con pies huecos tienen una mayor flexibilidad en los músculos posteriores de la extremidad inferior. Los pies huecos también están asociados con una mayor descarga de peso en la región del talón.
ABSTRACT Objective: To evaluate whether the formation of the longitudinal arch of the foot interferes with the distribution of plantar pressure and the pliability of the posterior thigh muscles. Methodology: a cross-sectional study and the footprints were obtained using the footprinting mat and analyzed according to the Viladot method. Plantar distribution and pliability were assessed by baropodometry and Wells' bank, respectively. Results: It was observed that children with cavus feet present greater pliability when compared to those with normal feet (p=0.02). Also, the cavus feet exhibit higher pressure, that is, a greater heel overload compared to those with normal plantar arch (p=0.02 lower right limb and p=0.03 lower left limb). Conclusions: The evaluation of the medial longitudinal arch shows that children with cavus feet have greater pliability of the lower limb posterior muscles. The cavus feet are also associated with higher pressure in the calcaneal region.
Subject(s)
Humans , Male , Female , Child , Thigh/physiology , Range of Motion, Articular/physiology , Muscle, Skeletal/physiology , Foot/physiology , Biomechanical Phenomena/physiology , Body Height , Body Weights and Measures , Body Mass Index , Cross-Sectional Studies , Weight-Bearing/physiology , Postural Balance/physiology , Talipes Cavus/physiopathologyABSTRACT
OBJECTIVE@#To study and analyze the clinical effect of the self-developed new adjustable weight-bearing rehabilitation brace in the rehabilitation of the femoral intertrochanteric fracture after the operation of PFNA.@*METHODS@#From July 2015 to June 2017, 62 patients with typeⅡ (Evans-Jensen classification) intertrochanteric fracture of femur were treated with PFNA internal fixation. There were 11 males and 19 females in the routine rehabilitation group, with an average age of (70.73± 6.09) years;17 males and 15 females in the brace rehabilitation group, with an average age of (71.25±6.60) years. Among them, the patients in the routine rehabilitation group recovered according to the routine method, and the patients in the support rehabilitation group used the self-developed new adjustable weight-bearing rehabilitation support of lower limbs to assist the early rehabilitation. The pain intensity(VAS score), weight-bearing of affected limb, clinical healing time of fracture, Harris score and complications were recorded and analyzed.@*RESULTS@#Nine patients lost their visit half a year later, the other 53 patients were followed up for 9 to 18 months. The VAS score at 1, 3, 6 months after operation of brace rehabilitation group was lower than that of routine rehabilitation group(<0.05). The weight bearing of the limbs in the rehabilitation group was significantly higher than that in the conventional rehabilitation group(<0.05), but the clinical healing time of fracture in the brace rehabilitation group was shorter than that in the routine rehabilitation group(<0.05). In addition, the Harris score of the postoperativebrace rehabilitation group was better than that of the conventional rehabilitation group(<0.05). The incidence of complications was lower than that of the conventional rehabilitation group(=0.048).@*CONCLUSION@#In the rehabilitation of Evans Jensen typeⅡintertrochanteric fracture after PFNA internal fixation, the new self-developed adjustable weight-bearing rehabilitation brace can significantly relieve postoperative pain, regulate and moderately increase the stress stimulation at the fracture end, so as to promote fracture healing, accelerate the recovery of hip joint function, reduce the incidence of complications, and its clinical effect is safe and reliable.
Subject(s)
Aged , Female , Humans , Male , Middle Aged , Bone Nails , Braces , Fracture Fixation, Intramedullary , Hip Fractures , Lower Extremity , Retrospective Studies , Treatment Outcome , Weight-BearingABSTRACT
Abstract Although fiber-reinforced composites are commonly used in dental practice, whether fiber-reinforced crowns and fixed partial dentures can be used as definitive prostheses remains to be determined. This study used scanning electron microscopy to evaluate the load-bearing capacity of non-reinforced and fiber-reinforced composite (FRC) molar crowns prepared by computer-aided design/computer-aided manufacturing (CAD/CAM). The crowns were fabricated from three empirical FRC blocks, one empirical composite block, and one commercial ceramic block. The FRC resin was prepared by mixing BaO silicate particles, E-glass fiber, and dimethacrylate resin. Specimens were divided into five groups (n = 10), differing in the amounts of filler, resin, and fiber. Crowns were statically loaded until fracture. One-way analysis of variance and Tukey's post hoc multiple comparison tests were used for statistical analyses. The groups showed significant differences in load-bearing capacity; empirical bidirectional FRC resin blocks had the highest capacity, while commercial ceramic blocks had the lowest capacity. Molar crowns formed from FRC resin blocks had higher load-bearing capacity compared to non-reinforced composite resin and ceramic blocks. These results show that fiber reinforcement increased the load-bearing capacity of molar crowns.
Subject(s)
Humans , Weight-Bearing , Computer-Aided Design , Composite Resins/chemistry , Crowns , Reference Values , Surface Properties , Materials Testing , Microscopy, Electron, Scanning , Ceramics/chemistry , Reproducibility of Results , Dental Prosthesis Design , Evaluation Study , MolarABSTRACT
Objective: To evaluate the fracture resistance (RF) of Class II Glass-ionomer Cement (GIC) ART restorations with and without proximal retentions. Material and Methods: 20 freshly extracted human molars were used. Forty (40) standard Mesial-Occlusal (MO) and DistalOcclusal (DO) preparations (20 for each material) were performed with a 245 bur. The unprepared surfaces of the teeth were protected with nail polish and the specimens submerged in 0.5Mol EDTA solution, pH 7.4 for 8h under stirring. The preparations were finished with dentine spoons and 50% received proximal retention with # 3 excavators. 20 cavities were restored with Chemfil Rock (10 with retention and 10 without retention) and 20 cavities were restored with Equia Fil (10 with retention and 10 with no retention) and were stored in an oven at 37ºC and 100% relative humidity for 24h and submitted to axial compression loading in Test Machine - EMIC at a rate of 0.5 mm / minute, until restoration fracture occurred. The values were analyzed by two-way ANOVA (p<0.05). Results: ChemFil Rock presented 300.84 (69.20) (without retention) and 361.70 (81.08) (with retention) and Equia Fil showed 314.60 (69.97) (without retention) and 366.67 (103.38) (with retention). Data obtained with retention were statistically superior to those obtained with non-retained ART restorations (p=0.014). No statistical differences were detected between materials (p=0.761). Conclusion: Retentive grooves improved fracture resistance of Class II GIC ART restorations. (AU)
Objetivo: avaliar a resistência à fratura (FR) de restaurações de ART de Classe II de Cimento de ionômero de vidro (CIV) com e sem retenções proximais. Material e Métodos: Foram utilizados 20 molares humanos recém-extraídos. 40 cavidades padronizadas no sentido Mesial-Oclusal (MO) e Oclusal-Distal (OD) (20 para cada material) foram realizadas com uma broca 245. Os preparos cavitários foram submersos em solução 0,5 mol Mol EDTA, pH 7,4 por 8h sob agitação e foram finalizados com colheres de dentina, nos quais 50% receberam retenções proximais com escavadores #3. 20 cavidades foram restauradas com Chemfil Rock (10 com e 10 sem retenção) e 20 cavidades foram restauradas com Equia Fil (10 com e 10 sem retenção) e armazenadas em estufa a 37ºC e 100% de umidade relativa por 24h e submetidos a carga axial de compressão na máquina de ensaios EMIC a uma taxa de 0,5mm/min, até que a fratura de restauração ocorresse. Os valores foram analisados por ANOVA twoway (p<0,05). Resultados: ChemFil Rock apresentou 300.84 (69.20) (sem retenção) e 361.70 (81.08) (com retenção) e o Equia Fil apresentou 314.60 (69.97) (sem retenção) e 366.67 (103.38) (com retenção). Os dados obtidos com retenção foram estatisticamente superiores àqueles sem retenção (p=0.014). Não houve diferença estatística entre os materiais (p=0.761). Conclusão: Os sulcos retentivos melhoraram a resistência à fratura de restaurações de ART de Classe II de Cimento de ionômero de vidro (CIV).(AU)
Subject(s)
Weight-Bearing , Dental Materials , Glass Ionomer CementsABSTRACT
O treino locomotor com suporte parcial de peso corporal (SPPC) é uma abordagem que tem sido utilizada na reabilitação do AVC. Entretanto, não há consenso na literatura sobre sua eficácia frente à reabilitação tradicional. Portanto, o objetivo desse estudo foi avaliar o efeito do treino com SPPC na velocidade de marcha após AVC na fase aguda. Um paciente, sexo masculino, 52 anos, foi avaliado através do Índice de Motricidade (IM) e Teste de Caminhada de 10 metros (TC10m). Recebeu, durante 5 dias, sessões de fisioterapia de 30 minutos, com 15 minutos de treino de marcha com SPPC. Apresentou um aumento de 28 pontos no IM e de mais de 50% nas velocidades de marcha normal e rápida. O resultado corrobora com estudos que evidenciam a eficácia do treino com SPPC na melhora da velocidade de marcha após AVC na fase aguda. (AU)
Locomotor training with partial body-weight support (PBWS) has been used for some years in stroke rehabilitation. However, there is no consensus in the literature about its effectiveness compared to conventional rehabilitation. Thus, the aim of this study was to evaluate the effect of PBWS training on gait speed after acute stroke. A 52-year-old male patient was assessed through Motricity Index (MI) and 10-meter Walk Test (10MWT). He had 30-minute physical therapy sessions, with 15-minute gait training with PBWS, for 5 days. The patient showed an increase of 28 points in MI and of over 50% in normal and fast gait speeds. The results are consistent with previous studies that showed the effectiveness of PBWS training in improving gait speed in acute stroke. (AU)
Subject(s)
Humans , Male , Middle Aged , Stroke Rehabilitation , Weight-Bearing , Lower Extremity , Gait Analysis/methodsABSTRACT
PURPOSE: This study examined the effects of self-volar gliding combined with a strap and wrist distraction on pain and the active and passive wrist extension range of motion (ROM) in subjects with dorsal wrist pain during partial weight bearing of the hand.METHODS: Thirty subjects (14 males and 16 females) with dorsal wrist pain during partial weight bearing through the hand participated in this study. The two different self-volar gliding techniques were performed for each group. Self-volar gliding using a strap (SVGS) and SVGS and wrist distraction (SVGSD) were performed five times for one week for each group. The active and passive ROM of wrist extension and the peak pressure pushed by the hand at pain (PPHP) were measured. An independent t-test was used to compare the improvements of these elements between the two different self-volar gliding techniques. The level of statistical significance was at α=0.05.RESULTS: The active and passive ROM of wrist extension and PPHP were greater in both self-volar gliding groups after the one week intervention. On the other hand, these parameters were greater in the SVGSD group than in the SVGS group (p<0.05)CONCLUSION: SVGSD is recommended to improve the active and passive ROM of wrist extension and PPHP in subjects with dorsal wrist pain during partial weight bearing of the hand.
Subject(s)
Humans , Male , Hand , Range of Motion, Articular , Weight-Bearing , WristABSTRACT
STUDY DESIGN: Between-session reliability of a magnetic resonance imaging (MRI) based experimental technique to quantify lumbar inter-vertebral motion in humans. PURPOSE: We have developed a novel, dynamic, MRI-based approach for quantifying in vivo lumbar inter-vertebral motion. In this study, we present the protocol's reliability results to quantify inter-vertebral spine motion. OVERVIEW OF LITERATURE: Morphometric studies on intervertebral displacements using static, supine MRI and quantification of dynamic spine motion using different X-ray based radiography techniques are commonly found in the literature. However, reliability testing of techniques assessing real-time lumbar intervertebral motion using weight-bearing MRI has rarely been reported. METHODS: Ten adults without a history of back pain performed a side-bending task on two separate occasions, inside an open-MRI, in a weight-bearing, upright position. The images were acquired during the task using a dynamic magnetic resonance (MR) sequence. The MRI imaging space was externally calibrated before the study to recreate the imaging volume for subsequent use in an animation software. The dynamic MR images were processed to create side-bending movement animations in the virtual environment. Participant-specific three-dimensional models were manually superimposed over vertebral image silhouettes in a sequence of image frames, representing the motion trials. Inter-vertebral axes and translation and rotational displacements of vertebrae were quantified using the animation software. RESULTS: Quantification of inter-vertebral rotations and translations shows high reliability. Between-session reliability results yielded high values for the intra-class correlation coefficient (0.86–0.93), coefficient of variation (13.3%–16.04%), and Pearson's correlation coefficients (0.89–0.98). CONCLUSIONS: This technique may be developed further to improve its speed and accuracy for diagnostic applications, to study in vivo spine stability, and to assess outcomes of surgical and non-surgical interventions applied to manage pathological spine motion.
Subject(s)
Adult , Humans , Back Pain , Intervertebral Disc , Low Back Pain , Lumbar Vertebrae , Magnetic Resonance Imaging , Radiography , Spine , Translations , Weight-BearingABSTRACT
BACKGROUND: Traditionally, conservative management with an offloading orthosis, such as total contact cast (TCC), has been the standard of care for midfoot Charcot arthropathy. Considering complications of TCC and surgery, we treated midfoot Charcot arthropathy without TCC in our patients. The purpose of this study was to report clinical and radiological outcomes of conservative management of midfoot Charcot arthropathy. METHODS: A total of 34 patients (38 feet) who were diagnosed as having midfoot Charcot arthropathy between 2006 and 2014 were included. Patients started full weight bearing ambulation in a hard-soled shoe immediately after diagnosis. Outcomes such as progression of arch collapse, bony prominence, ulcer occurrence, limb amputation, and changes in Charcot stage were evaluated. RESULTS: Of 38 feet, arch collapse was observed in four while progression of bottom bump of the midfoot was observed in five feet. Foot ulcers related to bony bumps were found in two feet. CONCLUSIONS: Conservative treatment without restriction of ambulation is recommended for midfoot Charcot arthropathy because it is rarely progressive, unlike hindfoot-ankle arthropathy. In some cases, simple bumpectomy can be required to prevent catastrophic infection.
Subject(s)
Humans , Amputation, Surgical , Arthropathy, Neurogenic , Diagnosis , Extremities , Foot , Foot Ulcer , Orthotic Devices , Shoes , Standard of Care , Ulcer , Walking , Weight-BearingABSTRACT
PURPOSE: There are concerns that administration of bisphosphonate (BP) can substantially suppress bone turnover, potentially interfering with fracture healing. We investigated the effects of preoperative BP administration before internal fixation of intertrochanteric femoral fractures using fracture healing and clinical outcomes. MATERIALS AND METHODS: We retrospectively analyzed data from 130 patients who underwent internal fixation for osteoporotic intertrochanteric femoral fractures between March 2012 and July 2016. Patients previously treated with BPs for at least 3 months (BP group; n=29) were compared with the remaining patients (BP-naïve group; n=101). Radiographs were used to assess and compare fracture healing 3 months and 1 year postsurgery. The primary clinical outcome measure assessed was change in Koval score. RESULTS: Fracture union at 3 months after surgery was verified in 72.4% of patients (21/29) in the BP group and 90.1% of patients (91/101) in the BP-naïve group (P=0.027). Fracture union at 1 year postsurgery (BP group, 93.1% [27/29] vs. BP-naïve group, 97.0% [98/101], P=0.310) and change in Koval score (1.1 vs. 1.0, P=0.694) were not significantly different between the groups. Multivariable logistic regression analysis revealed that a history of BP administration was associated with an increased risk of delayed union at 3 months postsurgery (P=0.014). CONCLUSION: Preoperative administration of BP was associated with a decreased fracture healing rate 3 months after internal fixation, compared with BP-naïve patients. Therefore, patients previously treated with a BP should be carefully allowed to wean off walking aids and transition to full weight-bearing in the early postoperative period.
Subject(s)
Humans , Bone Remodeling , Diphosphonates , Femoral Fractures , Fracture Healing , Hip Fractures , Logistic Models , Osteoporosis , Outcome Assessment, Health Care , Postoperative Period , Retrospective Studies , Walking , Weight-BearingABSTRACT
OBJECTIVE@#To investigate clinical effect of partly weight-bearing walking and functional exercise immediatly after operation for Achilles tendon rupture(ATR) on function of ankle joint and rate of fragmentation of Achilles tendon, through comparing effect of partly weight-bearing walking and functional exercise immediatly at 2 weeks after operation for Achilles tendon rupture.@*METHODS@#Sixty-four patients with ATR selected from March 2012 to March 2013 were randomly divided into two groups. There were 34 patients in treatment group, including 18 males and 16 females with an average age of 41.4±7.6, they began to do functional exercise and walk on fields with partly weight-bearing at two days after operation; there were 30 patients in control group, including 16 males and 14 females with an average age of 39.9±7.6, and they were immobilized with plaster in plantar flexion at two weeks after operation, and started to do functional exercise and walk on fields with partly weight-bearing at two weeks after operation. Two groups were performed by the same doctor with the same operation. The rate of fragmentation of Achilles tendon, and AOFAS score and complications between two groups were observed and compared.@*RESULTS@#AOFAS score in treatment group at two weeks after operation was 74.3±3.9, which in control group was 71.7±4.2, and had statistical differences between two groups; AOFAS score in treatment group at one year after operation was 93.3±3.9, which in control group was 92.0±4.1, and had no statistical significance. No Achilles tendon fragmentation in treatment group occurred at three years after operation, and 1 patient occurred in control group. Two patients in treatment group occurred complications after operation, and 1 patient occurred in control group, however, there was no statistical significance between two groups.@*CONCLUSIONS@#Functional exercise immediate after operation for Achilles tendon rupture(ATR) patients in the early days, the AOFAS scores is higher than the fixing for two weeks, and does not increase the rate of fragmentation of Achilles tendon and complication after operation, and benefits for function recovery.
Subject(s)
Adult , Female , Humans , Male , Middle Aged , Achilles Tendon , Rupture , Tendon Injuries , Treatment Outcome , Weight-BearingABSTRACT
In order to study the mechanical behavior of degeneration and nucleotomy of lumbar intervertebral disc, compression experiments with porcine lumbar intervertebral discs were carried out. The lumbar intervertebral discs with trypsin-treated and nucleus nucleotomy served as the experimental group and the normal discs as the control group. Considering the effects of load magnitude and loading rate, the relationship between stress and strain, instantaneous elastic modulus and creep property of intervertebral disc were obtained. The creep constitutive model was established. The results show that the strain and creep strain of the experimental group increase significantly with the increase of compression load and loading rate, whereas the instantaneous elastic modulus decreases obviously, compared with the control group. It indicates that the effect of load magnitude and loading rate on load-bearing capacity of intervertebral disc after nucleotomy is larger obviously than that of normal disc. The creep behavior of the experimental group can be still predicted by the Kelvin three-parameter solid model. The results will provide theoretical foundation for clinical treatment and postoperative rehabilitation of intervertebral disc disease.
Subject(s)
Animals , Biomechanical Phenomena , Intervertebral Disc , Physiology , General Surgery , Lumbar Vertebrae , Stress, Mechanical , Swine , Weight-BearingABSTRACT
Septic arthritis is a serious medical condition that can lead to significant complications if misdiagnosed or mismanaged. A rare case of a 1st metatarso-phalangeal joint septic arthritis in a native joint is presented in a patient with no significant risk factors. A 41-year-old patient was referred by his general practitioner owing to ongoing pain and swelling over his native 1st metatarso-phalangeal joint with difficulty on weightbearing for three months. After a series of investigations, including blood tests and a foot magnetic resonance imaging, which were inconclusive, the patient was led to the operating theatre for sampling and washout of his joint. The samples taken in the theatres revealed septic arthritis with Streptococcus mitis as the causative microorganism. The patient was treated with six weeks of oral antibiotics with a good functional outcome. This case report illuminates this rare condition and makes foot and ankle surgeons aware of its existence. A high suspicion for this condition can prevent misdiagnosis and mismanagement.