Résumé
No abstract available.
Sujets)
Édition , Bases de données bibliographiques , Périodiques comme sujet , Pose d'implant dentaire , Maladies parodontalesRésumé
No abstract available.
Résumé
PURPOSE: The purpose of this retrospective study with 4–12 years of follow-up was to compare the marginal bone loss (MBL) between external-connection (EC) and internal-connection (IC) dental implants in posterior areas without periodontal or peri-implant disease on the adjacent teeth or implants. Additional factors influencing MBL were also evaluated. METHODS: This retrospective study was performed using dental records and radiographic data obtained from patients who had undergone dental implant treatment in the posterior area from March 2006 to March 2007. All the implants that were included had follow-up periods of more than 4 years after loading and satisfied the implant success criteria, without any peri-implant or periodontal disease on the adjacent implants or teeth. They were divided into 2 groups: EC and IC. Subgroup comparisons were conducted according to splinting and the use of cement in the restorations. A statistical analysis was performed using the Mann-Whitney U test for comparisons between 2 groups and the Kruskal-Wallis test for comparisons among more than 2 groups. RESULTS: A total of 355 implants in 170 patients (206 EC and 149 IC) fulfilled the inclusion criteria and were analyzed in this study. The mean MBL was 0.47 mm and 0.15 mm in the EC and IC implants, respectively, which was a statistically significant difference (P < 0.001). Comparisons according to splinting (MBL of single implants: 0.34 mm, MBL of splinted implants: 0.31 mm, P=0.676) and cement use (MBL of cemented implants: 0.27 mm, MBL of non-cemented implants: 0.35 mm, P=0.178) showed no statistically significant differences in MBL, regardless of the implant connection type. CONCLUSIONS: IC implants showed a more favorable bone response regarding MBL in posterior areas without peri-implantitis or periodontal disease.
Sujets)
Humains , Résorption alvéolaire , Conception d'implant dentaire et de pilier , Implants dentaires , Dossiers dentaires , Études de suivi , Péri-implantite , Maladies parodontales , Études rétrospectives , Attelles , DentRésumé
PURPOSE: The aim of this study was to evaluate the capacity of single and combined applications of the bark of the stems and roots of Magnolia officinalis Rehd. et Wils. (Magnoliae Cortex) and Zea mays L. (maize) to modulate inflammation in RAW 264.7 cells stimulated with Porphyromonas gingivalis. METHODS: RAW 264.7 cells were stimulated with P. gingivalis, and Magnoliae Cortex and/or maize was added. Cytotoxicity and the capacity to modulate inflammation were determined with a methylthiazol tetrazolium (MTT) assay, nitrite production, enzyme-linked immunosorbent assay (ELISA), and western blotting. RESULTS: Treatment with Magnoliae Cortex and/or maize inhibited nuclear transcription factor κB (NF-κB) pathway activation and nuclear p44/42 mitogen-activated protein kinase (MAPK) and inducible nitric oxide synthase (iNOS) protein expression in P. gingivalis-stimulated RAW 264.7 cells. Moreover, the treatments suppressed cytokines (prostaglandin E2 [PGE2], interleukin [IL]-1β, and IL-6) and nitrite production. CONCLUSIONS: Both Magnoliae Cortex and maize exerted an anti-inflammatory effect on P. gingivalis-stimulated RAW 264.7 cells, and this effect was more pronounced when the extracts were combined. These findings show that these extracts may be beneficial for slowing the progression of periodontal disease.
Sujets)
Technique de Western , Cytokines , Test ELISA , Inflammation , Interleukines , Magnolia , Mitogen-Activated Protein Kinase 3 , Nitric oxide synthase type II , Maladies parodontales , Porphyromonas gingivalis , Porphyromonas , Protein kinases , Facteurs de transcription , Zea maysRésumé
PURPOSE: The present study describes 3 patients with chronic periodontitis and consequent vertical resorption of the alveolar ridge who were treated using implant-based restoration with guided bone regeneration (GBR). METHODS: After extraction of a periodontally compromised tooth, vertical bone augmentation using a K-incision was performed at the healed, low-level alveolar ridge. RESULTS: The partial-split K-incision enabled soft tissue elongation without any change in buccal vestibular depth, and provided sufficient keratinized gingival tissue during GBR. CONCLUSIONS: Within the limits of this study, the present case series demonstrated that the novel K-incision technique was effective for GBR and allowed normal implant-based restoration and maintenance of a healthy periodontal condition. However, further long-term follow-up and a large-scale randomized clinical investigation should be performed to evaluate the feasibility of this technique.
Sujets)
Humains , Résorption alvéolaire , Processus alvéolaire , Régénération osseuse , Parodontite chronique , Implants dentaires , Études de suivi , Régénération tissulaire guidée , DentRésumé
PURPOSE: Periodontitis and rheumatoid arthritis (RA) share a similar inflammatory pathogenesis. Porphyromonas gingivalis (Pg) can induce anticyclic-citrullinated peptide autoantibodies (anti-CCP antibodies), a key factor in the development of RA. This study aimed at evaluating the relationships between the 2 diseases and identifying the clinical implications thereof, with a focus on periodontal pathogens in Korean adults. METHODS: A total of 260 RA patients and 86 age- and sex-matched control patients without arthritis were enrolled in this prospective cross-sectional study. Periodontal indices and the prevalence and amount of periodontal pathogens were compared between the groups. Correlations between periodontal and RA indices were examined, as were correlations between 9 periodontal pathogens and RA indices. RESULTS: The RA group had significantly higher values than the control group for all investigated periodontal indices (P < 0.05) except the number of teeth. The gingival index (GI) was correlated with the disease activity score 28 (DAS28) (r = 0.125, P = 0.049), RA disease duration (r = 0.253, P < 0.001), erythrocyte sedimentation rate (ESR) (r = 0.162, P = 0.010), and anti-CCP antibody titer (r = 0.205, P = 0.004). Probing pocket depth (PPD) was correlated with ESR (r = 0.139, P = 0.027) and anti-Pg antibody titer (r = 0.203, P = 0.001). Bleeding on probing (BOP) was correlated with DAS28 (r = 0.137, P = 0.030), RA disease duration (r = 0.202, P = 0.001), ESR (r = 0.136, P = 0.030), anti-Pg antibody titer (r = 0.177, P = 0.005), and anti-CCP antibody titer (r = 0.188, P = 0.007). Clinical attachment level (CAL) and periodontitis severity were correlated with anti-Pg antibody titer (the former r = 0.201, P = 0.002; the latter r = 0.175, P = 0.006). The quantity of Pg was positively correlated with the serum anti-Pg antibody titer (r = 0.148, P = 0.020). CONCLUSIONS: The GI, BOP, and PPD showed positive relationships with several RA indices. The anti-Pg antibody titer had positive relationships with PPD, BOP, CAL, and periodontitis severity. Thus, increasing values of periodontal indices could be used as a risk indicator of disease development in RA patients, and an increasing anti-Pg antibody titer could be considered as a warning sign in RA patients suffering with periodontitis.
Sujets)
Adulte , Humains , Arthrite , Polyarthrite rhumatoïde , Autoanticorps , Sédimentation du sang , Études transversales , Hémorragie , Indice parodontal , Parodontite , Porphyromonas gingivalis , Prévalence , Études prospectives , DentRésumé
PURPOSE: The aim of this study was to evaluate volumetric and histologic changes in edentulous alveolar ridge areas after ridge preservation using basic fibroblast growth factor-2 (bFGF-2) in combination with collagenated biphasic calcium phosphate (BCP). METHODS: The experiments were performed in 6 adult male beagle dogs. The following 3 groups were created: 1) ridge preservation with bFGF-2 and collagenated BCP (experimental group), 2) ridge preservation with collagenated BCP (positive control group), and 3) a negative control group in which no ridge preservation procedure was performed. Volumetric change analysis was performed using an optical scanner and casts. Histological observations were made using light microscopy. RESULTS: After the initial swelling subsided, the magnitude of the volumetric change in the experimental group and positive control group was smaller than in the negative control group. In the experimental group, a distinct trend was observed for the resorption of residual bone and collagen fibers at 4 weeks and for more mature bone and faster healing at 12 weeks. CONCLUSIONS: Based on the findings of the present study, bFGF-2 may be considered for use as a therapeutic molecule in ridge preservation procedures.
Sujets)
Adulte , Animaux , Chiens , Humains , Mâle , Processus alvéolaire , Calcium , Collagène , Facteur de croissance fibroblastique de type 2 , Facteurs de croissance fibroblastique , Fibroblastes , Microscopie , Extraction dentaireRésumé
PURPOSE: The purpose of this study was to investigate the feasibility of regenerative therapy with a collagenated bone graft and resorbable membrane in intrabony defects, and to evaluate the effects of the novel extracellular matrix (ECM)-based membrane clinically and radiologically. METHODS: Periodontal tissue regeneration procedure was performed using an ECM-based resorbable membrane in combination with a collagenated bovine bone graft in intrabony defects around the teeth and implants. A novel extracellular matrix membrane (NEM) and a widely-used membrane (WEM) were randomly applied to the test group and the control group, respectively. Cone-beam computed tomography images were obtained on the day of surgery and 6 months after the procedure. Alginate impressions were taken and plaster models were made 1 week and 6 months postoperatively. RESULTS: The quantity of bone tissue, the dimensional changes of the surgically treated intrabony defects, and the changes in width and height below the grafted bone substitutes showed no significant difference between the test and control groups at the 6-month examination. CONCLUSIONS: The use of NEM for periodontal regeneration with a collagenated bovine bone graft showed similar clinical and radiologic results to those obtained using WEM.
Sujets)
Os et tissu osseux , Régénération osseuse , Substituts osseux , Étude clinique , Collagène , Tomodensitométrie à faisceau conique , Matrice extracellulaire , Régénération tissulaire guidée , Imagerie tridimensionnelle , Membranes , Régénération , Dent , TransplantsRésumé
PURPOSE: The aim of this study was to radiographically and clinically compare the effect of extracellular matrix (ECM) membranes on dimensional alterations following a ridge preservation procedure. METHODS: One of 2 different ECM membranes was applied during a ridge preservation procedure. A widely used ECM membrane (WEM; Bio-Gide, Geistlich Biomaterials, Wolhusen, Switzerland) was applied in the treatment group and a newly developed ECM membrane (NEM; Lyso-Gide, Oscotec Inc., Seongnam, Korea) was applied in the control group. Cone-beam computed tomography (CBCT) scans and alginate impressions were obtained 1 week and 6 months after the ridge preservation procedure. Results were analyzed using the independent t-test and the nonparametric Mann-Whitney U test. RESULTS: There were no significant differences between the ECM membranes in the changes in the dimension, width, and height of the extraction socket or the quantity of bone tissue. CONCLUSIONS: The NEM showed comparable clinical and radiographic results to the WEM following the ridge preservation procedure.
Sujets)
Greffe osseuse alvéolaire , Processus alvéolaire , Matériaux biocompatibles , Os et tissu osseux , Régénération osseuse , Étude clinique , Tomodensitométrie à faisceau conique , Matrice extracellulaire , Imagerie tridimensionnelle , Membranes , Alvéole dentaireRésumé
PURPOSE: The aim of this study was to determine the relationship between buccal bone thickness and gingival thickness by means of a noninvasive and relatively accurate digital registration method. METHODS: In 20 periodontally healthy subjects, cone-beam computed tomographic images and intraoral scanned files were obtained. Measurements of buccal bone thickness and gingival thickness at the central incisors, lateral incisors, and canines were performed at points 0–5 mm from the alveolar crest on the superimposed images. The Friedman test was used to compare buccal bone and gingival thickness for each depth between the 3 tooth types. Spearman's correlation coefficient was calculated to assess the correlation between buccal bone thickness and gingival thickness. RESULTS: Of the central incisors, 77% of all sites had a buccal thickness of 0.5–1.0 mm, and 23% had a thickness of 1.0–1.5 mm. Of the lateral incisors, 71% of sites demonstrated a buccal bone thickness <1.0 mm, as did 63% of the canine sites. For gingival thickness, the proportion of sites <1.0 mm was 88%, 82%, and 91% for the central incisors, lateral incisors, and canines, respectively. Significant differences were observed in gingival thickness at the alveolar crest level (G0) between the central incisors and canines (P=0.032) and between the central incisors and lateral incisors (P=0.013). At 1 mm inferior to the alveolar crest, a difference was found between the central incisors and canines (P=0.025). The lateral incisors and canines showed a significant difference for buccal bone thickness 5 mm under the alveolar crest (P=0.025). CONCLUSIONS: The gingiva and buccal bone of the anterior maxillary teeth were found to be relatively thin (<1 mm) overall. A tendency was found for gingival thickness to increase and bone thickness to decrease toward the root apex. Differences were found between teeth at some positions, although the correlation between buccal bone thickness and soft tissue thickness was generally not significant.
Sujets)
Tomodensitométrie à faisceau conique , Gencive , Volontaires sains , Incisive , Maxillaire , Méthodes , Interprétation d'images radiographiques assistée par ordinateur , DentRésumé
PURPOSE: This article describes a case of the successful non-surgical management of a periodontally compromised maxillary premolar. METHODS: A combination therapy, including root planing, occlusal adjustment, and tooth splinting, was applied. Clinical and radiographic examinations were performed during the 16-month follow-up period. RESULTS: All periodontal parameters were improved. There were dramatic decreases (3–6 mm) in the probing pocket depth, tooth mobility, and marginal bone loss. Interestingly, gradual resolution of the periapical radiolucency and alveolar bone regeneration were observed in the radiographs, and the periodontal condition was maintained during the follow-up period. CONCLUSIONS: Within the limits of this study, these results demonstrate the importance of natural tooth preservation through proper periodontal treatment and occlusal adjustment of the periodontally compromised tooth, which is typically targeted for tooth extraction and dental implantation.
Sujets)
Prémolaire , Régénération osseuse , Pose d'implant dentaire , Implants dentaires , Occlusion traumatique dentaire , Études de suivi , Ajustement occlusal , Parodontite , Surfaçage radiculaire , Attelles , Extraction dentaire , Mobilité dentaire , DentRésumé
PURPOSE: The aim of this study was to evaluate the effectiveness of powered toothbrushes for plaque control in patients with peri-implant mucositis, in comparison with manual toothbrushes. METHODS: This randomized, prospective, controlled, clinical parallel study compared the efficacy of manual and powered toothbrushes for plaque control in implant restorations. Patients with bleeding on probing, no residual pocket depth (as indicated by a pocket probing depth > or = 5 mm), and no radiological peri-implant bone loss were eligible for this study. Patients were requested to complete a questionnaire describing their oral hygiene habits. The duration and frequency of tooth brushing were recorded by subjects in order to assess their compliance. Clinical parameters, including the modified plaque index (mPI), the modified sulcus bleeding index (mSBI), and clinical photographs (buccal and lingual views) were recorded at baseline and at one-month and two-month follow-up visits. RESULTS: Statistically significant differences between patients who used manual toothbrushes and those who used powered toothbrushes were found regarding the frequency of tooth brushing per day and the duration of brushing at one-month and two-month follow-up visits, while no statistically significant differences were found relating to other oral hygiene habits. A statistically significant difference in patient compliance for tooth brushing was found at one month, while no difference was found at two months. Statistically significant decreases in the mPI and the mSBI were observed in both groups from baseline to the one- and two-month follow-ups. The overall reduction of these parameters was not significantly different between the two groups, except for mPI reduction between baseline and one month of follow-up. CONCLUSIONS: Sonic-powered toothbrushes may be a useful device for plaque control in patients with peri-implant mucositis.
Sujets)
Humains , Compliance , Implants dentaires , Plaque dentaire , Études de suivi , Hémorragie , Inflammation muqueuse , Hygiène buccodentaire , Observance par le patient , Études prospectives , Enquêtes et questionnaires , DentRésumé
Dental implant placement at posterior maxilla is often complicated by bone resorption, poor bone quality and the presence of pneumatized maxillary sinuses. Several techniques have been proposed to facilitate implant placement at posterior maxilla, but the need for a range of surgical interventions, the rote of complications and the extended time- consuming procedures involved, limited patient acceptance of the proposed treatment options. Novel methods were advocated for implant placement at posterior maxilla, whereby the sinus membrane can be elevated quickly and safely via lateral or crestal approaches, or short implants could be placed achieving successful outcome. The surgical time is markedly reduced and the techniques were reportedly comfortable for patients and surgeons. This review presents the scientific concepts and the level of evidence of the clinical procedures of those techniques
Sujets)
Humains , Maxillaire , Résorption osseuse , Sinus maxillaire , OstéotomieRésumé
Dental implant placement at posterior maxilla is often complicated by bone resorption, poor bone quality and the presence of pneumatized maxillary sinuses. Several techniques have been proposed to facilitate implant placement at posterior maxilla, but the need for a range of surgical interventions, the rate of complications and the extended time- consuming procedures involved, limited patient acceptance of the proposed treatment options. Novel methods were advocated for implant placement at posterior maxilla, whereby the sinus membrane can be elevated quickly and safely via lateral or crestal approaches, or short implants could be placed achieving successful outcome. The surgical time is markedly reduced and the techniques were reportedly comfortable for patients and surgeons. This review presents the scientific concepts and the level of evidence of the clinical procedures of those techniques
Résumé
PURPOSE: Implant stability at the time of surgery is crucial for the long-term success of dental implants. Primary stability is considered of paramount importance to achieve osseointegration. The purpose of the present study was to investigate the correlation between the insertion torque and primary stability of dental implants using artificial bone blocks with different bone densities and compositions to mimic different circumstances that are encountered in routine daily clinical settings. METHODS: In order to validate the objectives, various sized holes were made in bone blocks with different bone densities (#10, #20, #30, #40, and #50) using a surgical drill and insertion torque together with implant stability quotient (ISQ) values that were measured using the Osstell Mentor. The experimental groups under evaluation were subdivided into 5 subgroups according to the circumstances. RESULTS: In group 1, the mean insertion torque and ISQ values increased as the density of the bone blocks increased. For group 2, the mean insertion torque values decreased as the final drill size expanded, but this was not the case for the ISQ values. The mean insertion torque values in group 3 increased with the thickness of the cortical bone, and the same was true for the ISQ values. For group 4, the mean insertion torque values increased as the cancellous bone density increased, but the correlation with the ISQ values was weak. Finally, in group 5, the mean insertion torque decreased as the final drill size increased, but the correlation with the ISQ value was weak. CONCLUSIONS: Within the limitations of the study, it was concluded that primary stability does not simply depend on the insertion torque, but also on the bone quality.
Sujets)
Humains , Densité osseuse , Implants dentaires , Mandrillus , Mentors , Ostéo-intégration , Moment de torsionRésumé
Esophageal carcinoid tumors remain some of the rarest of all carcinoid tumors, with only several cases previously reported in the literature. The endoscopic mucosal resection of selected carcinoid tumors has been shown to be a valid, safe, and effective method of treatment. Endoscopic ultrasonography is the technique of choice to select patients eligible for endoscopic resection. Here, we report successful endoscopic mucosal resection of a low esophageal carcinoid tumor and review the relevant literature. The present case is the first reported case of esophageal carcinoid tumor in Korea.
Sujets)
Humains , Tumeur carcinoïde , Endosonographie , CoréeRésumé
PURPOSE: The purpose of this study was to investigate the effects of the immunosuppressants FK506 and cyclosporin A (CsA) on the osteogenic differentiation of rat mesenchymal stem cells (MSCs). METHODS: The effect of FK506 and CsA on rat MSCs was assessed in vitro. The MTT assay was used to determine the deleterious effect of immunosuppressants on stem cell proliferation at 1, 3, and 7 days. Alkaline phosphatase (ALP) activity was analyzed on days 3, 7, and 14. Alizarin red S staining was done on day 21 to check mineralization nodule formation. Real-time polymerase chain reaction (RT-PCR) was also performed to detect the expressions of bone tissue-specific genes on days 1 and 7. RESULTS: Cell proliferation was promoted more in the FK506 groups than the control or CsA groups on days 3 and 7. The FK506 groups showed increased ALP activity compared to the other groups during the experimental period. The ALP activity of the CsA groups did not differ from the control group in any of the assessments. Mineralization nodule formation was most prominent in the FK506 groups at 21 days. RT-PCR results of the FK506 groups showed that several bone-related genes-osteopontin, osteonectin, and type I collagen (Col-I)-were expressed more than the control in the beginning, but the intensity of expression decreased over time. Runx2 and Dlx5 gene expression were up-regulated on day 7. The effects of 50 nM CsA on osteonectin and Col-I were similar to those of the FK506 groups, but in the 500 nM CsA group, most of the genes were less expressed compared to the control. CONCLUSIONS: These results suggest that FK506 enhances the osteoblastic differentiation of rat MSCs. Therefore, FK506 might have a beneficial effect on bone regeneration when immunosuppressants are needed in xenogenic or allogenic stem cell transplantation to treat bone defects.
Sujets)
Animaux , Rats , Phosphatase alcaline , Anthraquinones , Régénération osseuse , Différenciation cellulaire , Prolifération cellulaire , Collagène de type I , Ciclosporine , Durapatite , Expression des gènes , Immunosuppresseurs , Cellules souches mésenchymateuses , Ostéoblastes , Ostéonectine , Réaction de polymérisation en chaine en temps réel , Transplantation de cellules souches , Cellules souches , TacrolimusRésumé
PURPOSE: The aim of this study was to investigate the effects of synthetic fibronectin (FN) fragments, including fibrin binding sites from amino-terminal FN fragments containing type I repeats 1 to 5, on osteoblast-like cell activity. METHODS: Oligopeptides ranging from 9 to 20 amino acids, designated FF1, FF3, and FF5, were synthesized by a solid-phase peptide synthesizing system, and we investigated the effects of these peptides on cell attachment and extent of mineralization using confocal microscopy, 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays, and Alizarin red S staining. RESULTS: FF3 and FF5 peptides increased the number of attached human osteoblastic cells, and FF3 administration led to prominent cell spreading. Mineralization was increased in FF3 and FF5 compared to FF1 and the untreated control. CONCLUSIONS: Taken together, it can be concluded that the fibrin-binding oligopeptides FF3 and FF5 enhanced cell attachment and mineralization on osteoblast-like cells. These results indicate that FF3 and FF5 have the potential to increase osteoblast-like cell activity. Performing an in vivo study may provide further possibilities for surface modification of biomimetic peptides to enhance osteogenesis, thus improving the regeneration of destroyed alveolar bone.
Sujets)
Humains , Acides aminés , Anthraquinones , Sites de fixation , Biomimétique , Fibrine , Fibronectines , Microscopie confocale , Oligopeptides , Ostéoblastes , Ostéogenèse , Peptides , Régénération , Sels de tétrazolium , ThiazolesRésumé
PURPOSE: In this study, brazing characteristics of ZrO2 and Ti-6Al-4V brazed joints with increasing temperature were investigated. MATERIALS AND METHODS: The sample size of the ZrO2 was 3 mm x 3 mm x 3 mm (thickness), and Ti-6Al-4V was 10 mm (diameter) x 5 mm (thickness). The filler metal consisted of Ag-Cu-Sn-Ti was prepared in powder form. The brazing sample was heated in a vacuum furnace under 5 x 10(-6) torr atmosphere, while the brazing temperature was changed from 700 to 800degrees C for 30 min. RESULTS: The experimental results shows that brazed joint of ZrO2 and Ti-6Al-4V occurred at 700 - 800degrees C. Brazed joint consisted of Ag-rich matrix and Cu-rich phase. A Cu-Ti intermetallic compounds and a Ti-Sn-Cu-Ag alloy were produced along the Ti-6Al-4V bonded interface. Thickness of the reacted layer along the Ti-6Al-4V bonded interface was increased with brazing temperature. Defect ratios of ZrO2 and Ti-6Al-4V bonded interfaces decreased with brazing temperature. CONCLUSION: Thickness and defect ratio of brazed joints were decreased with increasing temperature. Zirconia was not wetting with filler metal, because the reaction between ZrO2 and Ti did not occur enough.
Sujets)
Alliages , Atmosphère , Implants dentaires , Température élevée , Articulations , Taille de l'échantillon , Titane , Vide , ZirconiumRésumé
PURPOSE: The aim of this study was to compare osteoblast behavior on zirconia and titanium under conditions cultured with bone morphogenetic protein-2. METHODS: MC3T3-E1 cells were cultured on sandblasted zirconia and sandblasted/etched titanium discs. At 24 hours after seeding MC3T3-E1, the demineralized bone matrix (DBM) gel alone and the DBM gel with bone morphogenetic protein-2 (BMP-2) were added to the culture medium. The surface topography was examined by confocal laser scanning microscopy. Cellular proliferation was measured at 1, 4, and 7 days after gel loading. Alkaline phosphatase activity was measured at 7 days after gel loading. The mRNA expression of ALPase, bone sialoprotein, type I collagen, runt-related transcription factor 2 (Runx-2), osteocalcin, and osterix were evaluated by real-time polymerase chain reaction at 4 days and 7 days. RESULTS: At 1, 4, and 7 days after loading the DBM gel alone and the DBM gel with BMP-2, cellular proliferation on the zirconia and titanium discs was similar and that of the groups cultured with the DBM gel alone and the DBM gel with BMP-2 was not significantly different, except for titanium with BMP-2 gel. ALPase activity was higher in the cells cultured with BMP-2 than in the other groups, but there was no difference between the zirconia and titanium. In ALPase, bone sialoprotein, osteocalcin, Runx-2 and osterix gene expression, that of cells on zirconia or titanium with BMP-2 gel was much more highly increased than titanium without gel at day 7. The gene expression level of cells cultured on zirconia with BMP-2 was higher than that on titanium with BMP-2 at day 7. CONCLUSIONS: The data in this study demonstrate that the osteoblastic cell attachment and proliferation of zirconia were comparable to those of titanium. With the stimulation of BMP-2, zirconia has a more pronounced effect on the proliferation and differentiation of the osteoblastic cells compared with titanium.