Effect of several repair techniques on the bond strength between composite resin and degraded Y-TZP ceramic / Efeito de várias técnicas de reparo na resistência de união entre resina composta e zircônia degradada
Braz. dent. sci
; 21(4): 377-385, 2018. ilus, tab
Article
in En
| LILACS, BBO
| ID: biblio-965247
Responsible library:
BR243.1
ABSTRACT
Objective:
To evaluate the bond strength of different repair treatments for composite resin to aged Y-TZP ceramics. Material andMethods:
Zirconia blocks were cut into smaller specimens, sintered according to manufacturer's recommendations (final dimensions of 4×4×3 mm), and randomly allocated into nine groups (n=15) according to the surface treatment and presence/ absence of aging of the substrate (subjected to lowtemperature degradation - LTD), as follows without LTD (Control without treatment; TBS tribochemical silica coating + silane + adhesive); with LTD (Control-LTD without treatment; TBS-LTD TBS with hydrothermal degradation; MoS-LTD Monobond S + adhesive; MoPLTD Monobond Plus + adhesive; MZP-LTD Metal/ Zirconia Primer + adhesive; USB-LTD Single Bond Universal; AP-LTD Alloy primer + adhesive). LTD was simulated in an autoclave (134 °C, 2 bar, 5 h). The ceramic blocks were embedded in PVC cylinders with a self-curing acrylic resin; each surface treatment protocol was performed; a composite resin cylinder ( 3.25 mm and height 3 mm) was then build-up using split metallic matrices. All the specimens were aged (thermocycling + storage in water for 90 days) and subjected to the shear bond strength test using a universal testing machine (1 mm/min). The failure mode was classified into four types adhesive, composite resin cohesive fracture, ceramic cohesive fracture, and mixed. The bond strength values were subjected to MannWhitney test.Results:
Only air-abraded samples (TBS and TBSLTD) survived thermocycling. More than 80% of the samples of the other groups presented pre-test failures. TBS groups presented higher values of bond strength (3.94) compared to TBSLTD (0.96). The predominant type of failure for the surviving samples were adhesive.Conclusion:
Air particle abrasion is mandatory to improve the bond strength of the Y-TZP substrate; an aged substrate presents an even more unfavorable scenario for adhesion. (AU)RESUMO
Objetivo:
Avaliar a resistência de união ao cisalhamento gerada por diferentes técnicas de reparo em resina composta aderida em zircônia envelhecida (sujeita a degradação a baixa temperatura - LTD). Material eMétodos:
blocos de zircônia foram seccionados em espécimes, sinterizados de acordo com o fabricante (dimensões finais de 4x4x3 mm), e aleatorizados em nove grupos (n=15) de acordo com o tratamento de superfície e presença/ausência de envelhecimento do substrato (LTD), conforme sem LTD (Control sem tratamento; TBS tribosilicatização + silano + adesivo); com LTD (Control-LTD Monobond S + adesivo; MoP-LTD Monobond plus + adesivo; MZPLTD Meta/Zirconia primer + adesivo). LTD foi simulada em autoclave (134 °C, 2 bar, 5 h). Os blocos de cerâmica foram embutidos em cilindros de PVC com resina acrílica autopolimerizável; cada tratamento de superfície foi realizado; um cilindro de resina composta ( 3,25 mm 3 mm de altura) foi confeccionado usando matrizes metálicas bipartidas. Todos os espécimes foram envelhecidos (termociclagem + armazenagem em água por 90 dias) e sujeitos ao teste de cisalhamento usando um equipamento de teste universal (1 mm/ min). O modo de falha foi classificado em quatro grupos adesivo, fratura coesiva em resina composta, fratura coesiva da cerâmica, e mista. Os valores de adesão foram sujeitos ao teste de Mann-Whitney.Resultados:
somente as amostras jateadas (TBS e TBSLTD) sobreviveram a termociclagem. Mais que 80% dos espécimes dos outros grupos apresentaram falhas préteste. Os grupos TBS apresentaram os maiores valores de resistência ao cisalhamento (3,94) comparado com TBS-LTD (0,96). Os tipos predominantes de falha para os espécimes sobreviventes foi adesiva.Conclusão:
o jateamento é recomendável para aumentar a resistência adesiva à zircônia; um substrato envelhecido apresenta um cenário mais desfavorável de adesão. (AU)Key words
Full text:
1
Index:
LILACS
Main subject:
Dental Prosthesis Repair
/
Air Abrasion, Dental
/
Shear Strength
Type of study:
Clinical_trials
/
Guideline
Language:
En
Journal:
Braz. dent. sci
Journal subject:
ODONTOLOGIA
/
Sa£de Bucal
Year:
2018
Type:
Article