Effect of light-curing units and activation mode on polymerization shrinkage and shrinkage stress of composite resins
J. appl. oral sci
; 16(1): 35-42, Jan.-Feb. 2008. ilus, graf, tab
Article
in En
| LILACS
| ID: lil-472687
Responsible library:
BR1.1
ABSTRACT
The aim of this study was to evaluate the polymerization shrinkage and shrinkage stress of composites polymerized with a LED and a quartz tungsten halogen (QTH) light sources. The LED was used in a conventional mode (CM) and the QTH was used in both conventional and pulse-delay modes (PD). The composite resins used were Z100, A110, SureFil and Bisfil 2B (chemical-cured). Composite deformation upon polymerization was measured by the strain gauge method. The shrinkage stress was measured by photoelastic analysis. The polymerization shrinkage data were analyzed statistically using two-way ANOVA and Tukey test (p<0.05), and the stress data were analyzed by one-way ANOVA and Tukey's test (p<0.05). Shrinkage and stress means of Bisfil 2B were statistically significant lower than those of Z100, A110 and SureFil. In general, the PD mode reduced the contraction and the stress values when compared to CM. LED generated the same stress as QTH in conventional mode. Regardless of the activation mode, SureFil produced lower contraction and stress values than the other light-cured resins. Conversely, Z100 and A110 produced the greatest contraction and stress values. As expected, the chemically cured resin generated lower shrinkage and stress than the light-cured resins. In conclusion, The PD mode effectively decreased contraction stress for Z100 and A110. Development of stress in light-cured resins depended on the shrinkage value.
Key words
Full text:
1
Index:
LILACS
Main subject:
Composite Resins
/
Dental Materials
/
Curing Lights, Dental
Type of study:
Prognostic_studies
Limits:
Humans
Language:
En
Journal:
J. appl. oral sci
Journal subject:
ODONTOLOGIA
Year:
2008
Type:
Article