Efeito do lubrificante no torque de afrouxamento de parafusos protéticos sob dois níveis de adaptação de próteses implantossuportadas / Lubrication effect on loosening torque of prosthetic screw under two levels of implant-supported prostheses fit
Full dent. sci
; 5(18): 292-297, abr. 2014. ilus, tab, graf
Article
in Pt
| LILACS, BBO
| ID: lil-716609
Responsible library:
BR1264.1
RESUMO
A literatura sugere que a utilização de lubrificante poderia aumentar a estabilidade das conexões parafusadas. Este estudo avaliou a influência do uso de lubrificante líquido no torque de afrouxamento de parafusos protéticos em próteses mandibulares implantossuportadas sob diferentes níveis de adaptação. Foram criadas duas condições de adaptação (adaptação passiva e desajuste), confeccionando 2 modelos de gesso a partir de cada prótese. Foram utilizados 20 conjuntos de parafusos protéticos de titânio (5 parafusos cada conjunto) divididos aleatoriamente em 4 grupos 1) sem lubrificante + adaptação passiva (grupo controle); 2) sem lubrificante + esajuste; 3) com lubrificante + adaptação passiva e 4) com lubrificante + desajuste. O torque de afrouxamento dos parafusos foi mensurado 10 minutos após aplicação do torque de aperto (10 Ncm), utilizando torquímetro digital. Os resultados foram submetidos à ANOVA (2 fatores) e teste de Tukey (a=0,05). Os valores médios (desvio padrão) de torque de afrouxamento (Ncm) foram G1 = 7,6 (0,4); G2 = 6,6 (0,3); G3 = 7,5 (0,2) e G4 = 6,9 (0,8). O fator adaptação apresentou diferença estatisticamente significante (p=0,003). Porém, o fator lubrificante e a interação entre os fatores não foram significantes (p=0,537 e p=0,311, respectivamente). O desajuste diminuiu o torque de afrouxamento dos parafusos protéticos, enquanto que o lubrificante líquido não apresentou efeito considerável.
ABSTRACT
The literature suggests that the use of lubricant may increase the screw joint stability. This study has evaluated the influence of the use of liquid lubricant on loosening torque of prosthetic screws in implant-supported mandibular dentures under different fit levels. Two conditions were created (passive fit and misfit) making 2 cast models from each denture. Twenty set of titanium prosthetic screws (5 screws each set) were randomly divided in 4 groups 1) without lubricant + passive fit (control group); 2) without lubricant + misfit; 3) with lubricant + passive fit; and 4) with lubricant + misfit. The loosening torque of the screws was measured 10 minutes after applied torque (10 Ncm) using digital torque meter. The data were submitted to the ANOVA (two-way) and Tukeys test (a;=0.05). The mean values (standard deviation) of loosening torque (Ncm) were G1 = 7.6 (0.4); G2 = 6.6 (0.3); G3 = 7.5 (0.2); and G4 = 6.9 (0.8). The factor fit presented significant statistically difference (p=0.003). However, the factor lubricant and the factors interaction were not significant (p=0.537 and p=0.311, respectively). The misfit decreased the loosening torque of the prosthetic screws, whereas the liquid lubricant did not present considerable effect
Key words
Search on Google
Index:
LILACS
Main subject:
Bone Screws
/
In Vitro Techniques
/
Dental Implants
/
Dental Prosthesis
/
Torque
Type of study:
Clinical_trials
/
Prognostic_studies
Language:
Pt
Journal:
Full dent. sci
Journal subject:
ODONTOLOGIA
Year:
2014
Type:
Article