Effect of exposure energy dose on lateral resolution and flexural strength of threedimensionally printed dental zirconia
The Journal of Advanced Prosthodontics
; : 248-258, 2023.
Article
in En
| WPRIM
| ID: wpr-1002881
Responsible library:
WPRO
ABSTRACT
PURPOSE@#. This study aims to evaluate the effects of exposure energy on the lateral resolution and mechanical strength of dental zirconia manufactured using digital light processing (DLP). @*MATERIALS AND METHODS@#. A zirconia suspension and a custom top-down DLP printer were used for in-office manufacturing. The viscosity of the suspension and uniformity of the exposed light intensity were controlled. Based on the exposure energy dose delivered to each layer, the specimens were classified into three groups low-energy (LE), medium-energy (ME), and high-energy (HE). For each energy group, a simplified molar cube was used to measure the widths of the outline (Xo and Yo ) and isthmus (Xi and Yi ), and a bar-shaped specimen of the sintered body was tested. A Kruskal–Wallis test for the lateral resolution and one-way analysis of variance for the mechanical strength were performed (α = .05). @*RESULTS@#. The zirconia green bodies of the ME group showed better lateral resolution than those of the LE and HE groups (both P < .001). Regarding the flexural strength of the sintered bodies, the ME group had the highest mean value, whereas the LE group had the lowest mean value (both P < .05). The ME group exhibited fewer agglomerates than the LE group, with no distinctive interlayer pores or surface defects. @*CONCLUSION@#. Based on these findings, the lateral resolution of the green body and flexural strength of the sintered body of dental zirconia could be affected by the exposure energy dose during DLP. The exposure energy should be optimized when fabricating DLPbased dental zirconia.
Full text:
1
Index:
WPRIM
Language:
En
Journal:
The Journal of Advanced Prosthodontics
Year:
2023
Type:
Article