RESUMO
Acylated peptides composed of glucagon-like peptide-1 receptor agonists modified with a fatty acid side chain are an important class of therapeutics for type 2 diabetes and obesity but are susceptible to an unusual physical instability in the presence of hydrophobic surfaces, i.e., spontaneous emulsification, also known as ouzo formation in practice. In this work, light scattering, small-angle X-ray scattering, and circular dichroism measurements are used to characterize the physical properties of the semaglutide colloidal phase, including size distribution, shape, secondary structure, internal structure, and internal composition, as a function of solution physico-chemical conditions. The existence and size of the colloids formed are successfully predicted by a classical Rayleigh model, which identifies the parameters controlling their size and formation. Colloid formation is found to be catalyzed by hydrophobic surfaces, and formation rates are modeled as an autocatalytic reaction, enabling the formation of a master curve for various surfaces that elucidates the mechanism. Surfaces differ due to differences in surface wettability, which can be correlated with Hansen solubility parameters. This work provides insights into this unusual colloidal phenomenon and guides the peptide synthesis process and drug product formulation in the pharmaceutical industry.
Assuntos
Diabetes Mellitus Tipo 2 , Humanos , Peptídeos Semelhantes ao Glucagon , Molhabilidade , Peptídeos , Coloides/química , Receptor do Peptídeo Semelhante ao Glucagon 1/agonistas , HipoglicemiantesRESUMO
The abilities of the cohesive-adhesive balance approach to atomic force microscopy (AFM) and the measurement of Hansen partial solubility parameters by inverse gas chromatography (IGC) to predict the performance of carrier-based dry powder inhaler (DPI) formulations were compared. Five model drugs (beclometasone dipropionate, budesonide, salbutamol sulphate, terbutaline sulphate and triamcinolone acetonide) and three model carriers (erythritol, α-lactose monohydrate and d-mannitol) were chosen, giving fifteen drug-carrier combinations. Comparison of the AFM and IGC interparticulate adhesion data suggested that they did not produce equivalent results. Comparison of the AFM data with the in vitro fine particle delivery of appropriate DPI formulations normalised to account for particle size differences revealed a previously observed pattern for the AFM measurements, with a slightly cohesive AFM CAB ratio being associated with the highest fine particle fraction. However, no consistent relationship between formulation performance and the IGC data was observed. The results as a whole highlight the complexity of the many interacting variables that can affect the behaviour of DPIs and suggest that the prediction of their performance from a single measurement is unlikely to be successful in every case.
Assuntos
Coloides/química , Preparações Farmacêuticas/química , Pós/química , Adesividade , Administração por Inalação , Albuterol/química , Beclometasona/química , Budesonida/química , Química Farmacêutica/métodos , Cromatografia Gasosa/métodos , Portadores de Fármacos/química , Inaladores de Pó Seco/métodos , Eritritol/química , Lactose/química , Manitol/química , Microscopia de Força Atômica/métodos , Tamanho da Partícula , Solubilidade , Terbutalina/química , Triancinolona Acetonida/químicaRESUMO
The liquid-phase exfoliation of graphitic carbon nitride (g-C3N4) to afford colloidal dispersions of two-dimensional flakes constitutes an attractive route to facilitate the processing and implementation of this novel material toward different technological applications, but quantitative knowledge about its dispersibility in solvents is lacking. Here, we investigate the dispersion behavior of exfoliated g-C3N4 in a wide range of solvents and evaluate the obtained results on the basis of solvent surface energy and Hildebrand/Hansen solubility parameters. Estimates of the three Hansen parameters for exfoliated g-C3N4 from the experimentally derived data yielded δD ≈ 17.8 MPa(1/2), δP ≈ 10.8 MPa(1/2), and δH ≈ 15.4 MPa(1/2). The relatively high δH value suggested that, contrary to the case of other two-dimensional materials (e.g., graphene or transition metal dichalcogenides), hydrogen-bonding plays a substantial role in the efficient interaction, and thus dispersibility, of exfoliated g-C3N4 with solvents. Such an outcome was attributed to a high density of primary and/or secondary amines in the material, the presence of which was associated with incomplete condensation of the structure. Furthermore, cell proliferation tests carried out on thin films of exfoliated g-C3N4 using murine fibroblasts suggested that this material is highly biocompatible and noncytotoxic. Finally, the exfoliated g-C3N4 flakes were used as supports in the synthesis of Pd nanoparticles, and the resulting hybrids exhibited an exceptional catalytic activity in the reduction of nitroarenes.
Assuntos
Materiais Biocompatíveis/química , Coloides/química , Nitrilas/química , Animais , Calibragem , Catálise , Proliferação de Células , Sobrevivência Celular , Fibroblastos/metabolismo , Grafite/química , Ligação de Hidrogênio , Teste de Materiais , Nanopartículas Metálicas/química , Camundongos , Microscopia Eletrônica de Varredura , Nitrogênio/química , Paládio/química , Pós , Pressão , Solubilidade , Solventes/química , Espectrofotometria Ultravioleta , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Using the Rogers-Young (RY) integral equation scheme for the static pair correlation functions combined with the liquid-phase Hansen-Verlet freezing rule, we study the generic behavior of the radial distribution function and static structure factor of monodisperse charge-stabilized suspensions with Yukawa-type repulsive particle interactions at freezing. In a related article, labeled Paper I [J. Gapinski, G. Nägele, and A. Patkowski, J. Chem. Phys. 136, 024507 (2012)], this hybrid method was used to determine two-parameter freezing lines for experimentally controllable parameters, characteristic of suspensions of charged silica spheres in dimethylformamide. A universal scaling of the RY radial distribution function maximum is shown to apply to the liquid-bcc and liquid-fcc segments of the universal freezing line. A thorough analysis is made of the behavior of characteristic distances and wavenumbers, next-neighbor particle coordination numbers, osmotic compressibility factor, and the Ravaché-Mountain-Streett minimum-maximum radial distribution function ratio.
Assuntos
Coloides/química , Congelamento , Algoritmos , Modelos Químicos , Tamanho da PartículaRESUMO
Using the Rogers-Young (RY) integral equation scheme for the static structure factor combined with the one-phase Hansen-Verlet (HV) freezing rule, we study the equilibrium structure and two-parameter freezing lines of colloidal particles with Yukawa-type pair interactions representing charge-stabilized silica spheres suspended in dimethylformamide (DMF). Results are presented for a vast range of concentrations, salinities and effective charges covering particles with masked excluded-volume interactions. The freezing lines were obtained for the low-charge and high-charge solutions of the static structure factor, for various two-parameter sets of experimentally accessible system parameters. All RY-HV based freezing lines can be mapped on a universal fluid-solid coexistence line in good agreement with computer simulation predictions. The RY-HV calculations extend the freezing lines obtained in earlier simulations to a broader parameter range. The experimentally observed fluid-bcc-fluid reentrant transition of charged silica spheres in DMF can be explained using the freezing lines obtained in this work.
Assuntos
Algoritmos , Dimetilformamida/química , Congelamento , Dióxido de Silício/química , Coloides/química , Simulação por ComputadorRESUMO
Surface composition plays an important role in carbon nanotube dispersibility in different environments. Indeed, it determines the choice of dispersion medium. In this paper the effect of oxidation on the dispersion of HiPCO single-walled carbon nanotubes (SWNTs) in N-methyl-pyrrolidinone (NMP), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA), N-dodecyl-pyrrolidinone (N12P) and cyclohexyl-pyrrolidinone (CHP) was systematically studied. During the oxidation process, similar amounts of carboxylic acid and phenolic groups were introduced to mostly already existing defects. For each solvent the dispersion limits and the absorption coefficients were estimated by optical absorption analysis over a range of SWNT concentrations. The presence of acid oxygenated groups increased SWNT dispersibility in NMP, DMF and DMA, but decreased in N12P and CHP. The absorption coefficients, however, decreased for all solvents after oxidation, reflecting the weakening of the effective transition dipole of the π-π transition with even limited extension functionalization and solvent interaction. The analysis of the results in terms of Hansen and Flory-Huggins solubility parameters evidenced the influence of dipolar interactions and hydrogen bonding on the dispersibility of oxidized SWNTs.
Assuntos
Amidas/química , Coloides/química , Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestrutura , Oxigênio/química , Solventes/química , Substâncias Macromoleculares/química , Teste de Materiais , Conformação Molecular , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
The recently developed fundamental measure density functional theory (Hansen-Goos and Mecke 2009 Phys. Rev. Lett. 102 018302) for an inhomogeneous anisotropic hard body fluid is used as a basic ingredient in treating the Brownian dynamics of hard spherocylinders. After discussing the relevance of a free parameter in the fundamental measure density functional for the isotropic-nematic transition in equilibrium, we discuss the equilibrium phase behaviour of hard spherocylinders in a static external potential which couples only to the orientations. For external potentials favouring rod orientations along the poles of the unit sphere, there is a well-known paranematic-nematic transition which ceases to exist above a threshold of the strength V(0) of the external potential. However, when orientations along the equator are more favoured, in the plane of the potential energy V(0) and density, there is a phase transition from paranematic to nematic for any strength, which becomes second order above a critical threshold of V(0). The full equilibrium phase diagram in the V(0)-density plane is computed for a fixed rod aspect ratio of 5. For the equatorial cases, strength V(0) is then oscillating in time and dynamical density functional theory is used to compute the evolution of the orientational distribution. A subtle resonance for increasing oscillation frequencies is detected if the oscillating V(0) crosses the paranematic-nematic phase transition.