Cellulose synthesis by Komagataeibacter rhaeticus strain P 1463 isolated from Kombucha.

Isolate B17 from Kombucha was estimated to be an efficient producer of bacterial cellulose (BC). The isolate was deposited under the number P 1463 and identified as Komagataeibacter rhaeticus by comparing a generated amplified fragment length polymorphism (AFLP™) DNA fingerprint against a reference database. Static cultivation of the K. rhaeticus strain P 1463 in Hestrin and Schramm (HS) medium resulted in 4.40 ± 0.22 g/L BC being produced, corresponding to a BC yield from glucose of 25.30 ± 1.78 %, when the inoculum was made with a modified HS medium containing 10 g/L glucose. Fermentations for 5 days using media containing apple juice with analogous carbon source concentrations resulted in 4.77 ± 0.24 g/L BC being synthesised, corresponding to a yield from the consumed sugars (glucose, fructose and sucrose) of 37.00 ± 2.61 %. The capacity of K. rhaeticus strain P 1463 to synthesise BC was found to be much higher than that of two reference strains for cellulose production, Komagataeibacter xylinus DSM 46604 and Komagataeibacter hansenii DSM 5602T, and was also considerably higher than that of K. hansenii strain B22, isolated from another Kombucha sample. The BC synthesised by K. rhaeticus strain P 1463 after 40 days of cultivation in HS medium with additional glucose supplemented to the cell culture during cultivation was shown to have a degree of polymerization of 3300.0 ± 122.1 glucose units, a tensile strength of 65.50 ± 3.27 MPa and a length at break of 16.50 ± 0.83 km. For the other strains, these properties did not exceed 25.60 ± 1.28 MPa and 15.20 ± 0.76 km.

Physical, structural, mechanical and thermal characterization of bacterial cellulose by G. hansenii NCIM 2529.

The present study aims to investigate the physico mechanical, structural and thermal properties of the bacterial cellulose (BC) produced under shaking condition. Formation of characteristic cellulose sphere has been characterized by light and scanning electron microscopy. The purity of bacterial cellulose was confirmed by thin layer chromatography of hydrolyzed product and elemental analysis by Energy Dispersive Spectroscopy and Fourier transform infrared spectroscopy. High crystallinity bacterial cellulose (81%) composed by high Iα confirmed by X-ray diffraction and solid state C13 nuclear magnetic resonance spectroscopy. The Z-average particle size was 1.44 µm with high porosity of 181.81%. The water holding and absorption capacity was determined. Tensile strength reveals a Young's modulus of 15.71 ± 0.15 MPa and tensile strength of up to 14.94 MPa. The thermal behavior evaluated by thermogravimetry and differential scanning calorimetry shows the thermal stability of bacterial cellulose. The results demonstrated unique characteristics of bacterial cellulose produced at shaking condition.

Isolation and characterization of an efficient bacterial cellulose producer strain in agitated culture: Gluconacetobacter hansenii P2A.

In this study, typical niches of acetic acid bacteria were screened for isolation of cellulose producer strains. Hestrin Schramm broth was used as enrichment and production media. Only nine out of 329 isolates formed thick biofilms on liquid surface and were identified as potential cellulose producers. Physiological and biochemical tests proved that all cellulose producers belonged to Gluconacetobacter genus. Most productive and mutation-resistant strain was subjected to 16S rRNA sequence analysis and identified as Gluconacetobacter hansenii P2A due to 99.8 % sequence similarity. X-ray diffraction analysis proved that the biofilm conformed to Cellulose I crystal structure, rich in Iα mass fraction. Static cultivation of G. hansenii P2A in HS medium resulted with 1.89 ± 0.08 g/l of bacterial cellulose production corresponding to 12.0 ± 0.3 % yield in terms of substrate consumption. Shaking and agitation at 120 rpm aided in enhancement of the amount and yield of produced cellulose. Productivity and yield reached up to 3.25 ± 0.11 g/l and 17.20 ± 0.14 % in agitated culture while a slight decrease from 78.7 % to 77.3 % was observed in the crystallinity index.

Enriched glucose and dextrin mannitol-based media modulates fibroblast behavior on bacterial cellulose membranes.

Bacterial cellulose (BC) produced by Gluconacetobacter hansenii is a suitable biopolymer for biomedical applications. In order to modulate the properties of BC and expand its use as substrate for tissue engineering mainly in the form of biomembranes, glucose or dextrin were added into a BC fermentation mannitol-based medium (BCGl and BCDe, respectively) under static culture conditions. SEM images showed effects on fiber density and porosity on both sides of the BC membranes. Both enriched media decreased the BET surface area, water holding capacity, and rehydration rate. Fourier transform infrared (attenuated total reflectance mode) spectroscopy (FTIR-ATR) analysis revealed no change in the chemical structure of BC. L929 fibroblast cells were seeded on all BC-based membranes and evaluated in aspects of cell adhesion, proliferation and morphology. BCG1 membranes showed the highest biological performance and hold promise for the use in tissue engineering applications.

Quantification of the expression of reference and alcohol dehydrogenase genes of some acetic acid bacteria in different growth conditions.

AIMS: The aim of this study was to develop a reliable system to analyse the expression of the pyrroloquinoline quinone (PQQ)-alcohol dehydrogenase (ADH) and test its ability to predict the growth and oxidative activity of some acetic acid bacteria (AAB). METHODS AND RESULTS: Specific primers were designed for use in RT-PCR to quantify ADH expression and several housekeeping genes in four species of AAB. 16S rRNA gene was selected as an internal control. The relative expression of adhA was measured in Acetobacter aceti, Acetobacter pasteurianus, Gluconacetobacter hansenii and Gluconobacter oxydans grown in two media that had glucose or ethanol as the carbon source. AAB adhA expression was shown to be related to the two Acetobacter species' ability to oxidise and grow on ethanol, whereas G. oxydans were unable to grow on ethanol and the growth of Ga. hansenii was not related to adhA expression. CONCLUSIONS: The differential expression of ADH could be a marker to analyse both growth and oxidation ability in some AAB, especially those of the genus Acetobacter. SIGNIFICANCE AND IMPACT OF THE STUDY: Several housekeeping genes were tested in AAB and after growth in different media and it was evident that only the ribosomal coding genes were adequate as reference genes for RT-PCR.

Effect of surface attachment on synthesis of bacterial cellulose.

Gluconacetobacter spp. synthesize a pure form of hydrophilic cellulose that has several industrial specialty applications. Literature reports have concentrated on intensive investigation of static and agitated culture in liquid media containing high nutrient concentrations optimized for maximal cellulose production rates. The behavior of these bacteria on semisolid and solid surfaces has not been specifically addressed. The species Gluconacetobacter hansenii was examined for cellulose synthesis and colony morphology on a range of solid supports, including cotton linters, and on media thickened with agar, methyl cellulose, or gellan. The concentration and chemical structure of the thickening agent were found to be directly related to the formation of contiguous cellulose pellicules. Viability of the bacteria following freezer storage was improved when the bacteria were frozen in their cellulose pellicules.

Cellulose production by Gluconacetobacter hansenii in a medium containing ethanol.

The addition of 1% (v/v) ethanol to the basal medium inhibited growth of Gluconacetobacter hansenii but decreased the numbers of non-cellulose producing cells. Cellulose production increased 1.7 times to approx. 2.5 g l(-1) and showed a pattern of mixed growth-associated production. Microbial cells produced rigid pellicle-type bacterial cellulose as the shell of a large lump of bacterial cellulose like a static culture. The inoculum cultivated for 3 d maintained cellulose production by the fifth batch.