Preparation and characterization of solid lipid nanoparticles encapsulated noscapine and evaluation of its protective effects against imiquimod-induced psoriasis-like skin lesions.

Psoriasis is a chronic inflammatory skin disease characterized by thickening the epidermis with erythema, scaling, and proliferation. Noscapine (NOS) has several anti-inflammatory, anti-angiogenic, and anti-fibrotic effects, but its low solubility and large size results in its lower efficacy in the clinic. In this regard, solid lipid nanoparticles (SLN) encapsulated NOS (SLN-NOS) were fabricated using the well-known response surface method based on the central composite design and modified high-shear homogenization and ultrasound method. As a result, Precirol® was selected as the best lipid base for the SLN formulation based on Hildebrand-Hansen solubility parameters, in which SLN-NOS 1 % had the best zeta potential (-35.74 ± 2.59 mV), average particle size (245.66 ± 17 nm), polydispersity index (PDI, 0.226 ± 0.09), high entrapment efficiency (89.77 %), and ICH-based stability results. After 72 h, the SLN-NOS 1 % released 83.23 % and 58.49 % of the NOS at pH 5.8 and 7.4, respectively. Moreover, Franz diffusion cell's results indicated that the skin levels of NOS for SLN and cream formulations were 46.88 % and 13.5 % of the total amount, respectively. Our pharmacological assessments revealed that treatment with SLN-NOS 1 % significantly attenuated clinical parameters, namely ear thickness, length, and psoriasis area and severity index, compared to the IMQ group. Interestingly, SLN-NOS 1 % reduced the levels of interleukin (IL)-17, tumor necrosis factor-α, and transforming growth factor-ß, while elevating IL-10, compared to the IMQ group. Histology studies also showed that topical application of SLN-NOS 1 % significantly decreased parakeratosis, hyperkeratosis, acanthosis, and inflammation compared to the IMQ group. Taken together, SLN-NOS 1 % showed a high potential to attenuate skin inflammation.

Formulation development of lipid nanoparticles: Improved lipid screening and development of tacrolimus loaded nanostructured lipid carriers (NLC).

Lipid nanoparticles are well-known nanocarriers for improved drug delivery. Their formulation development typically involves three formulations steps. In the first part a suitable lipid mixture which enables a high loading capacity and high encapsulation efficacy of the active needs to be identified (lipid screening). In the second step suitable stabilizers that enable the production of small-sized lipid nanoparticles with narrow size distribution and sufficient physical stability need to be identified (stabilizer screening, optimization of production parameters) and in the third step the biopharmaceutical efficacy needs to be evaluated. Based on the results obtained the formulations will require further optimization. The classical formulation development of lipid nanoparticles and especially the classical lipid screening is tedious. Therefore, in this study, a novel approach for the lipid screening that was based on the determination of the Hansen solubility parameters was evaluated and the results obtained were compared to the results from the classical model. Tacrolimus was used as a model drug. Results showed that both lipid screenings led to similar results, indicating that the new approach can be used for future developments. The optimized formulation was composed of a lipid matrix system that contained waxes, triglycerides and monoacylglycerols with various carbon chain lengths (C8, C10, C16, C18) and enabled an encapsulation efficiency of ~99%. The stabilizer screening showed that surfactants with high HLB values, lower molecular weight, and shorter alkyl chain length tended to form smaller particles with narrower size distribution and better physical stability. The most suitable surfactant was found to be a caprylyl/capryl glucoside (Plantacare® 810), a PEG-free stabilizer, that is extremely mild for atopic skin. It led to particle sizes of about 200 nm and a zeta potential well above |30| mV. The optimized formulation contained 0.1% tacrolimus and possessed good physical stability. In conclusion, an optimized method for the selection of lipids that results in a limited number of experiments could be established and tacrolimus loaded lipid nanoparticles with similar drug load as a marketed formulation was successfully developed in this study.

Prediction and elucidation of factors affecting solubilisation of imatinib mesylate in lipids.

The physico-chemical properties of lipids influencing the solubilisation of imatinib mesylate (IM) in lipid matrix were evaluated and a statistical model to predict the same has been derived in the present study. After experimental quantification of IM solubility in various lipids, Hansen Hildebrand's total solubility parameters were calculated in order to study the role of various forces connected to lipid-drug interaction. To develop a relationship between the various descriptors of the lipids and experimental solubility of IM in lipids (% w/w), quantitative structure-solubility relationship (QSSR) was used. To generate equations that can predict the solubility of IM in lipids (%w/w), multiple linear regression was used. Amongst the various lipids tested, glyceryl monostearate and behenic acid solubilised the highest (6.19 ± 0.22%) and lowest (0.01 ± 0.01%) amounts of IM respectively. Our results suggested that alkyl chain length, polarity of the lipids, index of cohesive interaction in solids, estimated number of hydrogen bonds that would be accepted by the solute from water molecules in an aqueous solution, estimated number of hydrogen bonds that would be donated by the solute to water molecules in an aqueous solution and solvent accessible surface area collectively play a significant role in solubilising IM in the lipids. The equation developed could predict the solubility of IM in lipids with good accuracy (R2pred = 0.912).

Simultaneous cell disruption and lipid extraction of wet aurantiochytrium sp. KRS101 using a high shear mixer.

Microalgae are regarded as a promising source of biofuels, and the concept of a microalgae-based biorefinery has attracted increasing attention in recent years. From an economic perspective, however, the process remains far from competitive with fossil fuels. This is particularly true of lipid extraction, due in part to the energy-intensive drying step. As a result, wet extraction methods have been studied as an economic alternative. In the present study, a novel extraction approach which utilizes high shear stress mixing was adopted and demonstrated for simultaneous lipid extraction and cell disruption to enable the retrieval of lipids directly from concentrated wet biomass. When a high shear mixer (HSM) was used to extract lipid from a dense biomass (> 350 g/L) of the oleaginous algae Aurantiochytrium sp., it exhibited a yield of esterifiable lipids which exceeded 80% in 10 min at 15,000 rpm with various solvent types. The HSM was found to improve the lipid yields substantially with solvents less miscible with either lipids or water, such that the range of Hansen solubility parameters for the usable solvents became 3.3 times wider (14.9-26.5 MPa1/2). The HSM, which appeared effectively to loosen the water barrier that prevents solvent molecules from penetrating through the cell envelope, was found to be more efficient with hexane, hexane/isopropanol, and ethanol, all of which showed nearly identical lipid yields compared to the dry extraction process. The HSM can, indeed, offer a powerful mechanical means of lipid extraction with non-polar and less toxic solvents from wet biomass.

Overcoming clofazimine intrinsic toxicity: statistical modelling and characterization of solid lipid nanoparticles.

The aim of this work was to develop solid lipid nanoparticles (SLNs) loaded with clofazimine (CLZ) (SLNs-CLZ) to overcome its intrinsic toxicity and low water solubility, for oral drug delivery. A Box-Behnken design was constructed to unravel the relations between the independent variables in the selected responses. The optimized SLNs-CLZ exhibited the following properties: particle size ca 230 nm, zeta potential of -34.28 mV, association efficiency of 72% and drug loading of 2.4%, which are suitable for oral delivery. Further characterization included Fourier transformed infrared spectroscopy that confirmed the presence of the drug and the absence of chemical interactions. By differential scanning calorimetry was verified the amorphous state of CLZ. The storage stability studies ensured the stability of the systems over a period of 12 weeks at 4°C. In vitro cytotoxicity studies evidenced no effect of both drug-loaded and unloaded SLNs on MKN-28 gastric cells and on intestinal cells, namely Caco-2 and HT29-MTX cells up to 25 µg ml-1 in CLZ. Free CLZ solutions exhibited IC50 values of 16 and 20 µg ml-1 for Caco-2 and HT29-MTX cells, respectively. It can be concluded that the optimized system, designed considering important variables for the formulation of poorly soluble drugs, represents a promising platform for oral CLZ delivery.

Hansen solubility parameters (HSP) for prescreening formulation of solid lipid nanoparticles (SLN): in vitro testing of curcumin-loaded SLN in MCF-7 and BT-474 cell lines.

Curcumin, a phenolic compound from turmeric rhizome (Curcuma longa), has many interesting pharmacological effects, but shows very low aqueous solubility. Consequently, several drug delivery systems based on polymeric and lipid raw materials have been proposed to increase its bioavailability. Solid lipid nanoparticles (SLN), consisting of solid lipid matrix and a surfactant layer can load poorly water-soluble drugs, such as curcumin, deliver them at defined rates and enhance their intracellular uptake. In the present work, we demonstrate that, despite the drug's affinity to lipids frequently used in SLN production, the curcumin amount loaded in most SLN formulations may be too low to exhibit anticancer properties. The predictive curcumin solubility in solid lipids has been thoroughly analyzed by Hansen solubility parameters, in parallel with the lipid-screening solubility tests for a range of selected lipids. We identified the most suitable lipid materials for curcumin-loaded SLN, producing physicochemically stable particles with high encapsulation efficiency (>90%). Loading capacity of curcumin in SLN allowed preventing the cellular damage caused by cationic SLN on MCF-7 and BT-474 cells but was not sufficient to exhibit drug's anticancer properties. But curcumin-loaded SLN exhibited antioxidant properties, substantiating the conclusions that curcumin's effect in cancer cells is highly dose dependent.

Design and statistical modeling of mannose-decorated dapsone-containing nanoparticles as a strategy of targeting intestinal M-cells.

The aim of the present work was to develop and optimize surface-functionalized solid lipid nanoparticles (SLNs) for improvement of the therapeutic index of dapsone (DAP), with the application of a design of experiments. The formulation was designed to target intestinal microfold (M-cells) as a strategy to increase internalization of the drug by the infected macrophages. DAP-loaded SLNs and mannosylated SLNs (M-SLNs) were successfully developed by hot ultrasonication method employing a three-level, three-factor Box-Behnken design, after the preformulation study was carried out with different lipids. All the formulations were systematically characterized regarding their diameter, polydispersity index (PDI), zeta potential (ZP), entrapment efficiency, and loading capacity. They were also subjected to morphological studies using transmission electron microscopy, in vitro release study, infrared analysis (Fourier transform infrared spectroscopy), calorimetry studies (differential scanning calorimetry), and stability studies. The diameter of SLNs, SLN-DAP, M-SLNs, and M-SLN-DAP was approximately 300 nm and the obtained PDI was <0.2, confirming uniform populations. Entrapment efficiency and loading capacity were approximately 50% and 12%, respectively. Transmission electron microscopy showed spherical shape and nonaggregated nanoparticles. Fourier transform infrared spectroscopy was used to confirm the success of mannose coating process though Schiff's base formation. The variation of the ZP between uncoated (approximately -30 mV) and mannosylated formulations (approximately +60 mV) also confirmed the successful coating process. A decrease in the enthalpy and broadening of the lipid melting peaks of the differential scanning calorimetry thermograms are consistent with the nanostructure of the SLNs. Moreover, the drug release was pH-sensitive, with a faster drug release at acidic pH than at neutral pH. Storage stability for the formulations for at least 8 weeks is expected, since they maintain the original characteristics of diameter, PDI, and ZP. These results pose a strong argument that the developed formulations can be explored as a promising carrier for treating leprosy with an innovative approach to target DAP directly to M-cells.

Rhodovulum algae sp. nov., isolated from an algal mat.

A reddish-brown-pigmented, phototrophic bacterium, designated strain JA877T, was isolated from a brown algae mat sample collected from Jalandhar beach, Gujarat, India. On the basis of the 16S rRNA gene sequence, strain JA877T belongs to the class Alphaproteobacteria and is closely related to the type strains Rhodovulum viride JA756T (99.0 %), Rhodovulum sulfidophilum Hansen W4T (98.9 %), Rhodovulumvisakhapatnamense JA181T (98.8 %),Rhodovulum kholense JA297T (97.5 %) and Rhodovulum salis JA746T (97.0). However, strain JA877T showed only 20-45 % relatedness with its phylogenetic neighbours and had a ∆Tm between 5.8 and 7.0 °C. The major respiratory quinone was ubiquinone-10 (Q10), and the polar lipid profile was composed of the major components phosphatidylglycerol, phosphatidylethanolamine, an unidentified phospholipid, two unidentified sulfolipids and five unidentified lipids. The major fatty acids were C18 : 1ω5c, C18 : 1ω7c/C18 : 1ω6c, C16 : 0 and C18 : 0. The DNA G+C content was 64.5 mol%. On the basis of 16S rRNA gene sequence analysis, physiological data, and chemotaxonomic and molecular differences, strain JA877T is significantly different from other species of the genus Rhodovulum and represents a novel species, for which the name Rhodovulum algae sp. nov. is proposed. The type strain is JA877T (=LMG 29228T= KCTC 42963T).

High throughput screening: an in silico solubility parameter approach for lipids and solvents in SLN preparations.

OBJECTIVE: The present paper describes an in silico solubility behavior of drug and lipids, an essential screening study in preparation of solid lipid nanoparticles (SLN). MATERIALS AND METHODS: Ciprofloxacin HCl was selected as a model drug along with 11 lipids and 5 organic solvents. In silico miscibility study of drug/lipid/solvent was performed using Hansen solubility parameter approach calculated by group contribution method of Van Krevelen and Hoftyzer. Predicted solubility was validated by determining solubility of lipids in various solvent at different temperature range, while miscibility of drug in lipids was determined by apparent solubility study and partition experiment. RESULTS AND DISCUSSION: The presence of oxygen and OH functionality increases the polarity and hydrogen bonding possibilities of the compound which has reflected the highest solubility parameter values for Geleol and Capmul MCM C8. Ethyl acetate, Geleol and Capmul MCM C8 was identified as suitable organic solvent, solid lipid and liquid lipid respectively based on a solubility parameter approach which was in agreement with the result of an apparent solubility study and partition coefficient. CONCLUSION: These works demonstrate the validity of solubility parameter approach and provide a feasible predictor to the rational selection of excipients in designing SLN formulation.

Molecular basis of phosphatidyl-myo-inositol mannoside biosynthesis and regulation in mycobacteria.

Phosphatidyl-myo-inositol mannosides (PIMs) are unique glycolipids found in abundant quantities in the inner and outer membranes of the cell envelope of all Mycobacterium species. They are based on a phosphatidyl-myo-inositol lipid anchor carrying one to six mannose residues and up to four acyl chains. PIMs are considered not only essential structural components of the cell envelope but also the structural basis of the lipoglycans (lipomannan and lipoarabinomannan), all important molecules implicated in host-pathogen interactions in the course of tuberculosis and leprosy. Although the chemical structure of PIMs is now well established, knowledge of the enzymes and sequential events leading to their biosynthesis and regulation is still incomplete. Recent advances in the identification of key proteins involved in PIM biogenesis and the determination of the three-dimensional structures of the essential phosphatidyl-myo-inositol mannosyltransferase PimA and the lipoprotein LpqW have led to important insights into the molecular basis of this pathway.

Novel immunoadjuvants based on cationic lipid: Preparation, characterization and activity in vivo.

The interactions between three different protein antigens and dioctadecyldimethylammonium bromide (DODAB) dispersed in aqueous solutions from probe sonication or adsorbed as one bilayer onto particles was comparatively investigated. The three model proteins were bovine serum albumin (BSA), purified 18 kDa/14 kDa antigens from Taenia crassiceps (18/14-Tcra) and a recombinant, heat-shock protein hsp-18 kDa from Mycobacterium leprae. Protein-DODAB complexes in water solution were characterized by dynamic light scattering for sizing and zeta-potential analysis. Cationic complexes (80-100 nm of mean hydrodynamic diameter) displayed sizes similar to those of DODAB bilayer fragments (BF) in aqueous solution and good colloid stability over a range of DODAB and protein concentrations. The amount of cationic lipid required for attaining zero of zeta-potential at a given protein amount depended on protein nature being smaller for 18 kDa/14 kDa antigens than for BSA. Mean diameters for DODAB/protein complexes increased, whereas zeta-potentials decreased with NaCl or protein concentration. In mice, weak IgG production but significant cellular immune responses were induced by the complexes in comparison to antigens alone or carried by aluminum hydroxide as shown from IgG in serum determined by ELISA, delayed type hypersensitivity reaction from footpad swelling tests and cytokines analysis. The novel cationic adjuvant/protein complexes revealed good colloid stability and potential for vaccine design at a reduced DODAB concentration.

Lipids of pathogenic Mycobacteria: contributions to virulence and host immune suppression.

Mycobacteria are characterized by a complex cell wall, the lipid nature of which confers to the bacilli resistance to drying, acid or alkaline conditions, and to chemical disinfectants and therapeutic agents. Pathogenic species, such as Mycobacterium tuberculosis, M. leprae and M. ulcerans, have evolved various strategies to establish residence in their hosts and provoke long-term infections. There is mounting evidence that the unique lipids composing their envelopes, strategically located at the host-pathogen interface, contribute to their escape from immune surveillance. Here, the chemical structure, host cell receptors and biological actions of this emerging class of mycobacterial virulence factors are reviewed.

Acyl-CoA carboxylases (accD2 and accD3), together with a unique polyketide synthase (Cg-pks), are key to mycolic acid biosynthesis in Corynebacterianeae such as Corynebacterium glutamicum and Mycobacterium tuberculosis.

The Corynebacterianeae such as Corynebacterium glutamicum and Mycobacterium tuberculosis possess several unique and structurally diverse lipids, including the genus-specific mycolic acids. Although the function of a number of genes involved in fatty acid and mycolic acid biosynthesis is known, information relevant to the initial steps within these biosynthetic pathways is relatively sparse. Interestingly, the genomes of Corynebacterianeae possess a high number of accD genes, whose gene products resemble the beta-subunit of the acetyl-CoA carboxylase of Escherichia coli, providing the activated intermediate for fatty acid synthesis. We present here our studies on four putative accD genes found in C. glutamicum. Although growth of the accD4 mutant remained unchanged, growth of the accD1 mutant was strongly impaired and partially recovered by the addition of exogenous oleic acid. Overexpression of accD1 and accBC, encoding the carboxylase alpha-subunit, resulted in an 8-fold increase in malonyl-CoA formation from acetyl-CoA in cell lysates, providing evidence that accD1 encodes a carboxyltransferase involved in the biosynthesis of malonyl-CoA. Interestingly, fatty acid profiles remained unchanged in both our accD2 and accD3 mutants, but a complete loss of mycolic acids, either as organic extractable trehalose and glucose mycolates or as cell wall-bound mycolates, was observed. These two carboxyltransferases are also retained in all Corynebacterianeae, including Mycobacterium leprae, constituting two distinct groups of orthologs. Furthermore, carboxyl fixation assays, as well as a study of a Cg-pks deletion mutant, led us to conclude that accD2 and accD3 are key to mycolic acid biosynthesis, thus providing a carboxylated intermediate during condensation of the mero-chain and alpha-branch directed by the pks-encoded polyketide synthase. This study illustrates that the high number of accD paralogs have evolved to represent specific variations on the well known basic theme of providing carboxylated intermediates in lipid biosynthesis.

Characterization of three glycosyltransferases involved in the biosynthesis of the phenolic glycolipid antigens from the Mycobacterium tuberculosis complex.

Mycobacterium tuberculosis and Mycobacterium leprae, the two main mycobacterial pathogens in humans, produce highly specific long chain beta-diols, the dimycocerosates of phthiocerol, and structurally related phenolic glycolipid (PGL) antigens, which are important virulence factors. In addition, M. tuberculosis also secretes glycosylated p-hydroxybenzoic acid methyl esters (p-HBAD) that contain the same carbohydrate moiety as the species-specific PGL of M. tuberculosis (PGL-tb). The genes involved in the biosynthesis of these compounds in M. tuberculosis are grouped on a 70-kilobase chromosomal fragment containing three genes encoding putative glycosyltransferases: Rv2957, Rv2958c, and Rv2962c. To determine the functions of these genes, three recombinant M. tuberculosis strains, in which these genes were individually inactivated, were constructed and biochemically characterized. Our results demonstrated that (i) the biosynthesis of PGL-tb and p-HBAD involves common enzymatic steps, (ii) the Rv2957, Rv2958c, and Rv2962c genes are involved in the formation of the glycosyl moiety of the two classes of molecules, and (iii) the product of Rv2962c catalyzes the transfer of a rhamnosyl residue onto p-hydroxybenzoic acid ethyl ester or phenolphthiocerol dimycocerosates, whereas the products of Rv2958c and Rv2957 add a second rhamnosyl unit and a fucosyl residue to form the species-specific triglycosyl appendage of PGL-tb and p-HBAD. The recombinant strains produced provide the tools to study the role of the carbohydrate domain of PGL-tb and p-HBAD in M. tuberculosis pathogenesis.

CD1a and langerin: acting as more than Langerhans cell markers.

Langerhans cells (LCs) represent a unique DC subset populating the outermost body surface, i.e., the epidermis. Although CD1a and langerin (CD207) are used as specific markers to distinguish LCs from other DC subsets, their immunological functions have remained mostly unknown. A new paper (see the related article beginning on page 701) demonstrates that LCs utilize these markers to induce cellular immune responses to Mycobacterium leprae: CD1a mediates the presentation of nonpeptide antigens to T cells, while langerin facilitates uptake of microbial fragments and perhaps their delivery to a specialized subcellular compartment.

Revisiting the structure of the anti-neoplastic glucans of Mycobacterium bovis Bacille Calmette-Guerin. Structural analysis of the extracellular and boiling water extract-derived glucans of the vaccine substrains.

The attenuated strain of Mycobacterium bovis Bacille Calmette-Guérin (BCG), used worldwide to prevent tuberculosis and leprosy, is also clinically used as an immunotherapeutic agent against superficial bladder cancer. An anti-tumor polysaccharide has been isolated from the boiling water extract of the Tice substrain of BCG and tentatively characterized as consisting primarily of repeating units of 6-linked-glucosyl residues. Mycobacterium tuberculosis and other mycobacterial species produce a glycogen-like alpha-glucan composed of repeating units of 4-linked glucosyl residues substituted at some 6 positions by short oligoglucosyl units that also exhibits an anti-tumor activity. Therefore, the impression prevails that mycobacteria synthesize different types of anti-neoplastic glucans or, alternatively, the BCG substrains are singular in producing a unique type of glucan that may confer to them their immunotherapeutic property. The present study addresses this question through the comparative analysis of alpha-glucans purified from the extracellular materials and boiling water extracts of three vaccine substrains. The polysaccharides were purified, and their structural features were established by mono- and two-dimensional NMR spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of the enzymatic and chemical degradation products of the purified compounds. The glucans isolated by the two methods from the three substrains of BCG were shown to exhibit identical structural features shared with the glycogen-like alpha-glucan of M. tuberculosis and other mycobacteria. Incidentally, we observed an occasional release of dextrans from Sephadex columns that may explain the reported occurrence of 6-substituted alpha-glucans in mycobacteria.

Role of the pks15/1 gene in the biosynthesis of phenolglycolipids in the Mycobacterium tuberculosis complex. Evidence that all strains synthesize glycosylated p-hydroxybenzoic methyl esters and that strains devoid of phenolglycolipids harbor a frameshift mutation in the pks15/1 gene.

Diesters of phthiocerol and phenolphthiocerol are important virulence factors of Mycobacterium tuberculosis and Mycobacterium leprae, the two main mycobacterial pathogens in humans. They are both long-chain beta-diols, and their biosynthetic pathway is beginning to be elucidated. Although the two classes of molecules share a common lipid core, phthiocerol diesters have been found in all the strains of the M. tuberculosis complex examined although phenolphthiocerol diesters are produced by only a few groups of strains. To address the question of the origin of this diversity 8 reference strains and 10 clinical isolates of M. tuberculosis were analyzed. We report the presence of glycosylated p-hydroxybenzoic acid methyl esters, structurally related to the type-specific phenolphthiocerol glycolipids, in the culture media of all reference strains of M. tuberculosis, suggesting that the strains devoid of phenolphthiocerol derivatives are unable to elongate the putative p-hydroxybenzoic acid precursor. We also show that all the strains of M. tuberculosis examined and deficient in the production of phenolphthiocerol derivatives are natural mutants with a frameshift mutation in pks15/1 whereas a single open reading frame for pks15/1 is found in Mycobacterium bovis BCG, M. leprae, and strains of M. tuberculosis that produce phenolphthiocerol derivatives. Complementation of the H37Rv strain of M. tuberculosis, which is devoid of phenolphthiocerol derivatives, with the fused pks15/1 gene from M. bovis BCG restored phenolphthiocerol glycolipids production. Conversely, disruption of the pks15/1 gene in M. bovis BCG led to the abolition of the synthesis of type-specific phenolphthiocerol glycolipid. These data indicate that Pks15/1 is involved in the elongation of p-hydroxybenzoic acid to give p-hydroxyphenylalkanoates, which in turn are converted, presumably by the PpsA-E synthase, to phenolphthiocerol derivatives.

CD1 proteins: targets of T cell recognition in innate and adaptive immunity.

The CD1 family consists of antigen presenting molecules encoded by genes located outside of the major histocompatibility complex. CD1 proteins are conserved among mammalian species and are expressed on the surface of cells involved in antigen presentation. The CD1 system has been shown to be involved in activation of cell-mediated responses, and T cells specific for either CD1 molecules or antigens presented by CD1 have been isolated. Structural and biochemical analyses demonstrate that antigens presented by CD1 are nonpeptide lipid or glycolipid structures, including examples found in the cell walls of pathogenic mycobacteria. The hydrophobic part of these antigens most likely binds in the CD1 ligand-binding groove, whereas the polar headgroup of these antigens appears to make direct contact with the T cell receptor and determines specific recognition. Presentation of antigens by CD1 molecules requires uptake and intracellular processing by antigen presenting cells and can be achieved for both exogenous and endogenous antigens. T cells recognizing CD1 restricted antigens have a broad range of functional activities that suggest that the CD1 system is involved in both innate and adaptive immune responses against microbial infections.

Further stereochemical studies of phthiocerol and phenol phthiocerol in mycobacteria.

Mycobacterium tuberculosis, M. marinum and some other pathogenic species elaborate waxes A, based on a long-chain beta-diol (phthiocerol and companion compounds) and polymethyl-branched fatty acids. The stereochemical studies conducted on waxes A showed that those of M. tuberculosis, M. leprae and M. kansasii differ from waxes A isolated from M. marinum and M. ulcerans by the absolute configuration of the methyl-branched chiral centres occurring in both the long-chain beta-diols and the fatty acyls. Furthermore, the two mycobacterial groups also differ in the stereochemistry of the beta-diol chiral centres.