Solvent Exchange Dynamics in M2(dobdc): An Interplay among Binding Strength, Exchange Kinetics, and Cooperativity.

Solvent exchange is a crucial step in ensuring the complete activation of metal-organic frameworks (MOFs); however, the conditions for solvent exchange vary among MOFs, even within the isostructural variants. This study examines the factors contributing to solvent exchange by investigating the isostructural M2(dobdc) (M═Mg, Co, Zn) series. Common solvents N,N-dimethylformamide (DMF), ethanol (EtOH), and methanol (MeOH) are employed to assess the solvent exchange at coordinatively unsaturated sites (CUS) of M2(dobdc). By monitoring both solvents released from the MOF during solvent exchange and the coordination environment of metals within the MOF, a picture is constructed of exchange rates during early stages of solvent exchange as well as expulsion of the last traces of bound solvents. This differentiation is achieved by a combination of bulk monitoring of solvent phase composition and microscopic application of Raman spectroscopy on the single-crystal level. The kinetics of solvent replacement is revealed to have a substantial contribution from cooperativity; this phenomenon is observed in both the forward and reverse directions. Thermogravimetric analysis coupled with IR spectroscopy and density functional theory (DFT) calculations are employed to elucidate the relationship between solvent exchange rates and solvent binding energy. The solvent exchange rates are determined by the kinetic barriers of solvent exchange that do not follow the order of the solvent binding affinity. This work contributes to understanding the solvent exchange of MOFs by examining the interplay among the binding strength, exchange kinetics, and cooperativity. It further provides valuable insights for scrutinizing MOF activation protocols.

Perchlorate-Free Energetic Oxidizers Enabled by Ionic Cocrystallization.

The search for a suitable replacement for the ubiquitous oxidizer ammonium perchlorate (AP) is a top priority to enable more sustainable solid rocket motors. The oxidizing salts ammonium nitrate (AN) and ammonium dinitramide (ADN) are regarded as potential green replacements for AP, but suffer from a plethora of handling and processing issues including poor stability and a needle-like crystal morphology which inhibits dense packing; these prevent their widespread use. In the present work, ionic cocrystallization is leveraged to produce the first cocrystals of these oxidizing salts with an energetic coformer and the first such cocrystals to maintain a positive oxygen balance. The azole-based energetic molecule 5,5'-dinitro-2H,2H'-3,3″-bi-1,2,4-triazole (DNBT) is successfully cocrystallized with AN to yield the cocrystal 2AN:DNBT. Differential scanning calorimetry data confirms that AN, which in its pure form suffers from a problematic solid-state phase transition, is stabilized in the cocrystal. Application of this cocrystallization strategy to ADN produces 2ADN:DNBT, which has the highest oxygen balance of any organic cocrystal.

Adsorption of Natural Gas in Metal-Organic Frameworks: Selectivity, Cyclability, and Comparison to Methane Adsorption.

Evaluation of metal-organic frameworks (MOFs) for adsorbed natural gas (ANG) technology employs pure methane as a surrogate for natural gas (NG). This approximation is problematic, as it ignores the impact of other heavier hydrocarbons present in NG, such as ethane and propane, which generally have more favorable adsorption interactions with MOFs compared to methane. Herein, using quantitative Raman spectroscopic analysis and Monte Carlo calculations, we demonstrate the adsorption selectivity of high-performing MOFs, such as MOF-5, MOF-177, and SNU-70, for a methane and ethane mixture (95:5) that mimics the composition of NG. The impact of selectivity on the storage and deliverable capacities of these adsorbents during successive cycles of adsorption and desorption, simulating the filling and emptying of an ANG tank, is also demonstrated. The study reveals a gradual reduction in the storage performance of MOFs, particularly with smaller pore volumes, due to ethane accumulation over long-term cycling, until a steady state is reached with substantially degraded storage performance.

In Situ Observation of Solvent Exchange Kinetics in a MOF with Coordinatively Unsaturated Sites.

Solvent exchange of synthesis solvent within metal-organic frameworks (MOFs) is an essential process for the activation of coordinatively unsaturated sites (CUS) to achieve an optimal surface area; activation of the CUS is required to exploit the versatile applications of MOFs. However, it is challenging to replace CUS-bound synthesis solvent prior to MOF activation, which can lead to a structural collapse and reduced surface area post-evacuation. Herein, we quantify the exchange behavior of a copper paddlewheel-based CUS-MOF (HKUST-1) in the presence of three different solvents: ethanol (EtOH), dichloromethane (DCM), and N,N-dimethylformamide (DMF). The DMF release profiles are monitored via in situ observation of the exchange solvent composition via 1H NMR and Raman spectroscopy at the macroscopic scale. Furthermore, the change in solvent within a single crystal is measured to directly elucidate the exchange behavior. We demonstrate the DMF release profile from HKUST-1 exhibits different rate laws depending on whether the solvent exchange occurs at the CUS or is purely diffusive through the pores. This contribution represents the first characterization of release from a CUS-MOF as a function exchange solvent and reveals that solvent exchange in a CUS-MOF is not diffusion-limited, but rather is limited by the solvent exchange kinetics at the metal center. Insights from this study can be generalized to the variety of copper-paddlewheel-based MOFs, informing best practices for solvent exchange.

Progress in Predicting Ionic Cocrystal Formation: The Case of Ammonium Nitrate.

In contrast to the mature predictive frameworks applied to neutral cocrystals, ionic cocrystals, those including an ion pair, are difficult to design. Furthermore, they are generally excluded categorically from studies which correlate specific molecular properties to cocrystal formation, leaving the prospective ionic cocrystal engineer with few clear avenues to success. Herein ammonium nitrate, an energetic oxidizing salt, is targeted for cocrystallization in a potential coformer group selected based on likely interactions with the nitrate ion as revealed in the Cambridge Structural Database; six novel ionic cocrystals were discovered. Molecular descriptors previously identified as being related to neutral cocrystal formation were examined across the screening group but showed no relationship with ionic cocrystal formation. High packing coefficient is shown to be a constant among the successful coformers in the set and is utilized to directly target two more successful coformers, bypassing the need for a large screening group.

Structural Modifications of Polyethylenimine to Control Drug Loading and Release Characteristics of Amorphous Solid Dispersions.

Crystalline drugs with low solubility have the potential to benefit from delivery in the amorphous form. The polymers used in amorphous solid dispersions (ASDs) influence their maximum drug loading, solubility, dissolution rate, and physical stability. Herein, the influence of hydrophobicity of crosslinked polyethylenimine (PEI) is investigated for the delivery of the BCS class II nonsteroidal anti-inflammatory drug flufenamic acid (ffa). Several synthetic variables for crosslinking PEI with terephthaloyl chloride were manipulated: solvent, crosslinking density, reactant concentration, solution viscosity, reaction temperature, and molecular weight of the hyperbranched polymer. Benzoyl chloride was employed to cap amine groups to increase the hydrophobicity of the crosslinked materials. Amorphous deprotonated ffa was present in all ASDs; however, the increased hydrophobicity and reduced basicity from benzoyl functionalization led to a combination of amorphous deprotonated ffa and amorphous neutral ffa in the materials at high drug loadings (50 and 60 wt %). All ASDs demonstrated enhanced drug delivery in acidic media compared to crystalline ffa. Physical stability testing showed no evidence of crystallization after 29 weeks under various relative humidity conditions. These findings motivate the broadening of polymer classes employed in ASD formation to include polymers with very high functional group concentrations to enable loadings not readily achieved with existing polymers.

Microscale Determination of Binary Gas Adsorption Isotherms in MOFs.

The experimental determination of mixed gas isotherms is challenging and thus rarely performed. Nevertheless, characterizing the performance of adsorbents toward mixtures of gases is critical in most adsorptive separations. Here, the utility of Raman spectroscopy in determining binary gas adsorption isotherms on the microscale with metal-organic framework (MOF) single crystals is demonstrated for quantifying C2H6/CH4 selectivity. The influence of pore size on sorption selectivity is determined experimentally. The technique also allows determination of kinetics of methane adsorption in MOFs, which is critical for refueling times in adsorbed natural gas storage.

Development and Evolution of Energetic Cocrystals.

In spite of the importance of energetic materials to a broad range of military (munitions, missiles) and civilian (mining, space exploration) technologies, the introduction of new chemical entities in the field occurs at a very slow pace. This situation is understandable considering the stringent requirements for cost and safety that must be met for new chemical entities to be fielded. If existing manufacturing infrastructure could be leveraged, then this would offer a fundamental shift in the discovery paradigm. Cocrystallization is an approach poised to realize this goal because it can use existing materials and make new chemical compositions through the assembly of multiple unique components in the solid state. This account describes early proof-of-principle studies with widely used energetics in the field, including 2,4,6-trinitrotoluene (TNT) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), forming cocrystals with nonenergetic coformers that alter key properties such as density, sensitivity, and morphology. The evolution of these studies to produce cocrystals between two energetic components is detailed, including those exploiting new intermolecular interaction motifs that drive assembly such as halogen bonding. Implications of cocrystallization for performance, sensitivity to external stimuli, and manufacturability are explored at each stage. The derivation of many of these cocrystals from energetic materials in common use satisfies the goal of using materials already demonstrated to be cost-effective at scale and with well-understood safety profiles. The account concludes with a discussion of cocrystallizing molecules having excess of oxidizing power with those that are oxygen-deficient to push the limits of explosive performance to unprecedented levels. The purposeful production of an arbitrary combination of two solid components into a cocrystal is far from certain, but the studies described motivate the continued exploration of novel materials and the development of predictive models for identifying crystallization partners. When such cocrystals form, many of their most important properties cannot be predicted, pointing to another challenge for the purposeful development of energetic materials based on cocrystallization.

Metal-Organic Framework (MOF) Morphology Control by Design.

Exerting morphological control over metal-organic frameworks (MOFs) is critical for determining their catalytic performance and to optimize their packing behavior in areas from separations to fuel gas storage. A mechanism-based approach to tailor the morphology of MOFs is introduced and experimentally demonstrated for five cubic Zn4 O-based MOFs. This methodology provides three key features: 1) computational screening for selection of appropriate additives to change crystal morphology based on knowledge of the crystal structure alone; 2) use of additive to metal cluster geometric relationships to achieve morphologies expressing desired crystallographic facets; 3) potential for suppression of interpenetration for certain phases.

Linker Deprotonation and Structural Evolution on the Pathway to MOF-74.

The synthesis of MOF-74 (MOF = metal-organic framework) proceeds first through the generation of chemically and topologically distinct materials, referred to as phases, displaying exclusively carboxylate coordination, followed by further deprotonation to enable oxo coordination and MOF-74 formation. The synthesis of Mg-MOF-74 at high concentrations of linker and metal enables the stabilization and characterization of the previously unobserved, exclusively carboxylate coordinating phases. Ex situ and in situ approaches are leveraged to provide the time-resolved observation of Mg-MOF-74 synthesis and the formation of phases that precede Mg-MOF-74 formation as well as metastable phase dissolution. These data support dissolution and redeposition as the mechanism of MOF-74 formation and provide insight into the formation mechanism of MOFs with multiple linker coordination types.

Factors influencing hydrogen peroxide versus water inclusion in molecular crystals.

Hydrate formation is often unavoidable during crystallization, leading to performance degradation of pharmaceuticals and energetics. In some cases, water molecules trapped within crystal lattices can be substituted for hydrogen peroxide, improving the solubility of drugs and detonation performance of explosives. The present work compares hydrates and hydrogen peroxide solvates in two ways: (1) analyzing structural motifs present in crystal structures accessed from the Cambridge Structural Database and (2) developing potential energy surfaces for water and hydrogen peroxide interacting with functional groups of interest at geometries relevant to the solid state. By elucidating fundamental differences in local interactions that can be formed with molecules of hydrogen peroxide and/or water, the analyses presented here provide a foundation for the design and selection of candidate molecules for the formation of hydrogen peroxide solvates.

Superior Metal-Organic Framework Activation with Dimethyl Ether.

Metal-organic frameworks (MOFs) are demonstrated to be readily activated by treatment with the low surface tension, low boiling point solvent dimethyl ether (DME). The mildness of the method enables access to high surface areas by avoiding structural changes in the framework that often plague thermal activation methods. A distinction from previous methods is that DME activation succeeds for materials with coordinatively unsaturated sites (CUS) and non-CUS MOFs as well. DME displaces solvent molecules occupying the pores of the MOF as well as those coordinated to metal centers; reducing evacuation temperature by using a coordinating, yet highly volatile guest enables low temperature activation with structural retention as demonstrated surface area measurements that match or exceed existing activation protocols.

Computational Identification and Experimental Demonstration of High-Performance Methane Sorbents.

Remarkable methane uptake is demonstrated experimentally in three metal-organic frameworks (MOFs) identified by computational screening: UTSA-76, UMCM-152 and DUT-23-Cu. These MOFs outperform the benchmark sorbent, HKUST-1, both volumetrically and gravimetrically, under a pressure swing of 80 to 5 bar at 298 K. Although high uptake at elevated pressure is critical for achieving this performance, a low density of high-affinity sites (coordinatively unsaturated metal centers) also contributes to a more complete release of stored gas at low pressure. The identification of these MOFs facilitates the efficient storage of natural gas via adsorption and provides further evidence of the utility of computational screening in identifying overlooked sorbents.

Reagent Reactivity and Solvent Choice Determine Metal-Organic Framework Microstructure during Postsynthetic Modification.

The spatial distribution of MOF functionalization reveals that postsynthetic modification (PSM)-derived microstructures can range from uniform to core-shell, affected by reagent reactivity and solvent choice. A suite of isocyanate reagents with varying reactivity were employed to study the effect of kinetics and experimental conditions on microstructure during PSM. Exploiting the difference in reactivity between chloroacetyl isocyanate and 4-bromophenyl isocyanate, a one-pot PSM reaction produces a dual-functionalized core-shell structure. Furthermore, a triple-functionalized Matryoshka structure is formed in a two-step PSM procedure using trifluoroacetyl isocyanate followed by a self-sorting reaction with chloroacetyl isocyanate and 4-bromophenyl isocyanate, demonstrating that a better understanding of the dynamics of PSM can support the design of MOFs with increasingly sophisticated architectures.

Optimizing Hydrogen Storage in MOFs through Engineering of Crystal Morphology and Control of Crystal Size.

Metal-organic frameworks (MOFs) are promising materials for hydrogen storage that fail to achieve expected theoretical values of volumetric storage density due to poor powder packing. A strategy that improves packing efficiency and volumetric hydrogen gas storage density dramatically through engineered morphologies and controlled-crystal size distributions is presented that holds promise for maximizing storage capacity for a given MOF. The packing density improvement, demonstrated for the benchmark sorbent MOF-5, leads to a significant enhancement of volumetric hydrogen storage performance relative to commercial MOF-5. System model projections demonstrate that engineering of crystal morphology/size or use of a bimodal distribution of cubic crystal sizes in tandem with system optimization can surpass the 25 g/L volumetric capacity of a typical 700 bar compressed storage system and exceed the DOE targets 2020 volumetric capacity (30 g/L). Finally, a critical link between improved powder packing density and reduced damage upon compaction is revealed leading to sorbents with both high surface area and high density.

Halogen Bonding Propensity in Solution: Direct Observation and Computational Prediction.

Halogen-bonded complexes are often designed by consideration of electrostatic potential (ESP) predictions. ESP predictions do not capture the myriad variables associated with halogen bond (XB) donors and acceptors; thus, binding interaction cannot be quantitatively predicted. Here, a discrepancy between predictions based on ESP energy difference (ΔVs ) and computed gas phase binding energy (ΔEbind ) motivated the experimental determination of the relative strength of halogen bonding interactions in solution by Raman spectroscopic observation of complexes formed from interacting five iodobenzene-derived XB donors and four pyridine XB acceptors. Evaluation of ΔEbind coupled with absolutely-localized molecular orbital energy decomposition analysis (ALMO-EDA) deconvolutes halogen bonding energy contributions and reveals a prominent role for charge transfer (CT) interactions. Raman spectra reveal ΔEbind accurately predicts stronger interactions within iodopentafluorobenzene (IPFB) complexes than with 1-iodo-3,5-dinitrobenzene (IDNB) complexes even though IPFB has similar electrostatics to IDNB and contains a smaller σ-hole.

Solvent Choice in Metal-Organic Framework Linker Exchange Permits Microstructural Control.

Linker exchange is a widely applied, robust technique for elaboration of metal-organic frameworks (MOFs) post-synthesis. The observation of core-shell microstructures under certain conditions was hypothesized to arise from diffusion rates into the MOF that are slower than linker exchange. Here the relative contributions of these processes are manipulated through solvent choice in order to modulate shell thickness and exchange extent. The findings allow tailoring MOF microstructure to application.

Effect of Polymer Hydrophobicity on the Stability of Amorphous Solid Dispersions and Supersaturated Solutions of a Hydrophobic Pharmaceutical.

Amorphous solid dispersions of pharmaceuticals often show improved solubility over crystalline forms. However, the crystallization of amorphous solid dispersions during storage, or from elevated supersaturation once dissolved, compromise the solubility advantage of delivery in the amorphous phase. To combat this phenomenon, polymer additives are often included in solid dispersions to inhibit crystallization; however, the optimal properties for polymer to stabilize against crystallization are not fully understood, and furthermore, it is not known how inhibition of precipitation from solution is related to the propensity of a polymer to inhibit crystallization from the amorphous phase. Here, polymers of varied hydrophobicity are employed as crystallization inhibitors in supersaturated solutions and amorphous solid dispersions of the BCS Class II pharmaceutical ethenzamide to investigate the chemical features of polymer that lead to long-term stability for a hydrophobic pharmaceutical. A postpolymerization functionalization strategy was employed to alter the hydrophobicity of poly( N-hydroxyethyl acrylamide) without changing physical properties such as number-average chain length. It was found that supersaturation maintenance for ethenzamide is improved by increasing the hydrophobicity of dissolved polymer in aqueous solution. Furthermore, amorphous solid dispersions of ethenzamide containing a more hydrophobic polymer showed superior stability compared to those containing a less hydrophobic polymer. This trend of increasing polymer hydrophobicity leading to improved amorphous stability is interpreted by parsing the effects of water absorption in amorphous solid dispersions using intermolecular interaction strengths derived from global structural analysis. By comparing the structure-function relationships, which dictate stability in solution and amorphous solid dispersions, the effect of hydrophobicity can be broadly understood for the design of polymers to impart stability throughout the application of amorphous solid dispersions.

Inhibiting or Accelerating Crystallization of Pharmaceuticals by Manipulating Polymer Solubility.

Polymers play a central role in controlling the crystallization of pharmaceuticals with effects as divergent as amorphous form stabilization and the acceleration of crystallization. Here, using pyrazinamide and hydrochlorothiazide as model pharmaceuticals, it is demonstrated that the same functional group interactions are responsible for these opposing behaviors and that whether a polymer speeds or slows a crystallization can be controlled by polymer solubility. This concept is applied for the discovery of polymers to maintain drug supersaturation in solution: the strength of functional group interactions between drug and polymer is assessed through polymer-induced heteronucleation, and soluble polymers containing the strongest-interacting functional groups with drug are shown to succeed as precipitation inhibitors.

Enhanced Drug Delivery by Dissolution of Amorphous Drug Encapsulated in a Water Unstable Metal-Organic Framework (MOF).

Encapsulating a drug molecule into a water-reactive metal-organic framework (MOF) leads to amorphous drug confined within the nanoscale pores. Rapid release of drug occurs upon hydrolytic decomposition of MOF in dissolution media. Application to improve dissolution and solubility for the hydrophobic small drug molecules curcumin, sulindac, and triamterene is demonstrated. The drug@MOF composites exhibit significantly enhanced dissolution and achieves high supersaturation in simulated gastric and/or phosphate buffer saline media. This combination strategy where MOF inhibits crystallization of the amorphous phase and then releases drug upon MOF irreversible structural collapse represents a novel and generalizable approach for drug delivery of poorly soluble compounds while overcoming the traditional weakness of amorphous drug delivery: physical instability of the amorphous form.