Electrostatic interaction optimization improves catalytic rates and thermotolerance on xylanases.

Understanding the aspects that contribute to improving proteins' biochemical properties is of high relevance for protein engineering. Properties such as the catalytic rate, thermal stability, and thermal resistance are crucial for applying enzymes in the industry. Different interactions can influence those biochemical properties of an enzyme. Among them, the surface charge-charge interactions have been a target of particular attention. In this study, we employ the Tanford-Kirkwood solvent accessibility model using the Monte Carlo algorithm (TKSA-MC) to predict possible interactions that could improve stability and catalytic rate of a WT xylanase (XynAWT) and its M6 xylanase (XynAM6) mutant. The modeling prediction indicates that mutating from a lysine in position 99 to a glutamic acid (K99E) favors the native state stabilization in both xylanases. Our lab results showed that mutated xylanases had their thermotolerance and catalytic rate increased, which conferred higher processivity of delignified sugarcane bagasse. The TKSA-MC approach employed here is presented as an efficient computational-based design strategy that can be applied to improve the thermal resistance of enzymes with industrial and biotechnological applications.

New derivatives of the iridoid specioside from fungal biotransformation.

Iridoids are widely found from species of Bignoniaceae family and exhibit several biological activities, such as anti-inflammatory, antimicrobial, antioxidant, and antitumor. Specioside is an iridoid found from Tabebuia species, mainly in Tabebuia aurea. Thus, here fungus-mediated biotransformation of the iridoid specioside was investigated by seven fungi. The fungus-mediated biotransformation reactions resulted in a total of nineteen different analogs by fungus Aspergillus niger, Aspergillus flavus, Aspergillus japonicus, Aspergillus terreus, Aspergillus niveus, Penicillium crustosum, and Thermoascus aurantiacus. Non-glycosylated specioside was the main metabolite observed. The other analogs were yielded from ester hydrolysis, hydroxylation, methylation, and hydrogenation reactions. The non-glycosylated specioside and coumaric acid were yielded by all fungi-mediated biotransformation. Thus, fungus applied in this study showed the ability to perform hydroxylation and glycosidic, as well as ester hydrolysis reactions from glycosylated iridoid. KEY POINTS: • The biotransformation of specioside by seven fungi yielded nineteen analogs. • The non-glycosylated specioside was the main analog obtained. • Ester hydrolysis, hydroxylation, methylation, and hydrogenation reactions were observe.

Structure-guided design combined with evolutionary diversity led to the discovery of the xylose-releasing exo-xylanase activity in the glycoside hydrolase family 43.

Rational design is an important tool for sculpting functional and stability properties of proteins and its potential can be much magnified when combined with in vitro and natural evolutionary diversity. Herein, we report the structure-guided design of a xylose-releasing exo-ß-1,4-xylanase from an inactive member of glycoside hydrolase family 43 (GH43). Structural analysis revealed a nonconserved substitution (Lys247 ) that results in the disruption of the hydrogen bond network that supports catalysis. The mutation of this residue to a conserved serine restored the catalytic activity and crystal structure elucidation of the mutant confirmed the recovery of the proper orientation of the catalytically relevant histidine. Interestingly, the tailored enzyme can cleave both xylooligosaccharides and xylan, releasing xylose as the main product, being the first xylose-releasing exo-ß-1,4-xylanase reported in the GH43 family. This enzyme presents a unique active-site topology when compared with closely related ß-xylosidases, which is the absence of a hydrophobic barrier at the positive-subsite region, allowing the accommodation of long substrates. Therefore, the combination of rational design for catalytic activation along with naturally occurring differences in the substrate binding interface led to the discovery of a novel activity within the GH43 family. In addition, these results demonstrate the importance of solvation of the ß-propeller hollow for GH43 catalytic function and expand our mechanistic understanding about the diverse modes of action of GH43 members, a key and polyspecific carbohydrate-active enzyme family abundant in most plant cell-wall-degrading microorganisms.

A novel ß-glucosidase isolated from the microbial metagenome of Lake Poraquê (Amazon, Brazil).

The Amazon region holds most of the biological richness of Brazil. Despite their ecological and biotechnological importance, studies related to microorganisms from this region are limited. Metagenomics leads to exciting discoveries, mainly regarding non-cultivable microorganisms. Herein, we report the discovery of a novel ß-glucosidase (glycoside hydrolase family 1) gene from a metagenome from Lake Poraquê in the Amazon region. The gene encodes a protein of 52.9 kDa, named AmBgl-LP, which was recombinantly expressed in Escherichia coli and biochemically and structurally characterized. Although AmBgl-LP hydrolyzed the synthetic substrate p-nitrophenyl-ß-d-glucopyranoside (pNPßG) and the natural substrate cellobiose, it showed higher specificity for pNPßG (kcat/Km = 6 s-1·mM-1) than cellobiose (kcat/Km = 0.6 s-1·mM-1). AmBgl-LP showed maximum activity at 40 °C and pH 6.0 when pNPßG was used as the substrate. Glucose is a competitive inhibitor of AmBgl-LP, presenting a Ki of 14 mM. X-ray crystallography and Small Angle X-ray Scattering were used to determine the AmBgl-LP three-dimensional structure and its oligomeric state. Interestingly, despite sharing similar active site architecture with other structurally characterized GH1 family members which are monomeric, AmBgl-LP forms stable dimers in solution. The identification of new GH1 members by metagenomics might extend our understanding of the molecular mechanisms and diversity of these enzymes, besides enabling us to survey their industrial applications.

A Novel Carbohydrate-binding Module from Sugar Cane Soil Metagenome Featuring Unique Structural and Carbohydrate Affinity Properties.

Carbohydrate-binding modules (CBMs) are appended to glycoside hydrolases and can contribute to the degradation of complex recalcitrant substrates such as the plant cell wall. For application in bioethanol production, novel enzymes with high catalytic activity against recalcitrant lignocellulosic material are being explored and developed. In this work, we report the functional and structural study of CBM_E1, which was discovered through a metagenomics approach and is the founding member of a novel CBM family, CBM81. CBM_E1, which is linked to an endoglucanase, displayed affinity for mixed linked ß1,3-ß1,4-glucans, xyloglucan, Avicel, and cellooligosaccharides. The crystal structure of CBM_E1 in complex with cellopentaose displayed a canonical ß-sandwich fold comprising two ß-sheets. The planar ligand binding site, observed in a parallel orientation with the ß-strands, is a typical feature of type A CBMs, although the expected affinity for bacterial crystalline cellulose was not detected. Conversely, the binding to soluble glucans was enthalpically driven, which is typical of type B modules. These unique properties of CBM_E1 are at the interface between type A and type B CBMs.

New Heterofunctional Supports Based on Glutaraldehyde-Activation: A Tool for Enzyme Immobilization at Neutral pH.

Immobilization is an exciting alternative to improve the stability of enzymatic processes. However, part of the applied covalent strategies for immobilization uses specific conditions, generally alkaline pH, where some enzymes are not stable. Here, a new generation of heterofunctional supports with application at neutral pH conditions was proposed. New supports were developed with different bifunctional groups (i.e., hydrophobic or carboxylic/metal) capable of adsorbing biocatalysts at different regions (hydrophobic or histidine richest place), together with a glutaraldehyde group that promotes an irreversible immobilization at neutral conditions. To verify these supports, a multi-protein model system (E. coli extract) and four enzymes (Candidarugosa lipase, metagenomic lipase, ß-galactosidase and ß-glucosidase) were used. The immobilization mechanism was tested and indicated that moderate ionic strength should be applied to avoid possible unspecific adsorption. The use of different supports allowed the immobilization of most of the proteins contained in a crude protein extract. In addition, different supports yielded catalysts of the tested enzymes with different catalytic properties. At neutral pH, the new supports were able to adsorb and covalently immobilize the four enzymes tested with different recovered activity values. Notably, the use of these supports proved to be an efficient alternative tool for enzyme immobilization at neutral pH.

Molecular mechanisms associated with xylan degradation by Xanthomonas plant pathogens.

Xanthomonas pathogens attack a variety of economically relevant plants, and their xylan CUT system (carbohydrate utilization with TonB-dependent outer membrane transporter system) contains two major xylanase-related genes, xynA and xynB, which influence biofilm formation and virulence by molecular mechanisms that are still elusive. Herein, we demonstrated that XynA is a rare reducing end xylose-releasing exo-oligoxylanase and not an endo-ß-1,4-xylanase as predicted. Structural analysis revealed that an insertion in the ß7-α7 loop induces dimerization and promotes a physical barrier at the +2 subsite conferring this unique mode of action within the GH10 family. A single mutation that impaired dimerization became XynA active against xylan, and high endolytic activity was achieved when this loop was tailored to match a canonical sequence of endo-ß-1,4-xylanases, supporting our mechanistic model. On the other hand, the divergent XynB proved to be a classical endo-ß-1,4-xylanase, despite the low sequence similarity to characterized GH10 xylanases. Interestingly, this enzyme contains a calcium ion bound nearby to the glycone-binding region, which is required for catalytic activity and structural stability. These results shed light on the molecular basis for xylan degradation by Xanthomonas and suggest how these enzymes synergistically assist infection and pathogenesis. Our findings indicate that XynB contributes to breach the plant cell wall barrier, providing nutrients and facilitating the translocation of effector molecules, whereas the exo-oligoxylanase XynA possibly participates in the suppression of oligosaccharide-induced immune responses.

Mechanistic strategies for catalysis adopted by evolutionary distinct family 43 arabinanases.

Arabinanases (ABNs, EC 3.2.1.99) are promising catalysts for environmentally friendly biomass conversion into energy and chemicals. These enzymes catalyze the hydrolysis of the α-1,5-linked L-arabinofuranoside backbone of plant cell wall arabinans releasing arabino-oligosaccharides and arabinose, the second most abundant pentose in nature. In this work, new findings about the molecular mechanisms governing activation, functional differentiation, and catalysis of GH43 ABNs are presented. Biophysical, mutational, and biochemical studies with the hyperthermostable two-domain endo-acting ABN from Thermotoga petrophila (TpABN) revealed how some GH43 ABNs are activated by calcium ions via hyperpolarization of the catalytically relevant histidine and the importance of the ancillary domain for catalysis and conformational stability. On the other hand, the two GH43 ABNs from rumen metagenome, ARN2 and ARN3, presented a calcium-independent mechanism in which sodium is the most likely substituent for calcium ions. The crystal structure of the two-domain endo-acting ARN2 showed that its ability to efficiently degrade branched substrates is due to a larger catalytic interface with higher accessibility than that observed in other ABNs with preference for linear arabinan. Moreover, crystallographic characterization of the single-domain exo-acting ARN3 indicated that its cleavage pattern producing arabinose is associated with the chemical recognition of the reducing end of the substrate imposed by steric impediments at the aglycone-binding site. By structure-guided rational design, ARN3 was converted into a classical endo enzyme, confirming the role of the extended Arg(203)-Ala(230) loop in determining its action mode. These results reveal novel molecular aspects concerning the functioning of GH43 ABNs and provide new strategies for arabinan degradation.

Increased biomass saccharification by supplementation of a commercial enzyme cocktail with endo-arabinanase from Bacillus licheniformis.

OBJECTIVES: The use of endo-arabinanase from Bacillus licheniformis (ABNase) for sugarcane saccharification has been evaluated by enzyme immobilization and commercial cocktail supplement with the immobilized heterologous protein. RESULTS: Biochemical characterization of the purified ABNase showed that the catalytic activity was strongly inhibited by 5 mM Cu(2+), Zn(2+) or Fe(3+). The optimum pH and temperature for activity were 5.5-6.5 and 35-40 °C, respectively. The enzyme stability increased 128-fold when immobilized with glyoxyl agarose, and the hydrolysis of pretreated sugar cane biomass increased by 15 % when a commercial enzyme cocktail was supplemented with immobilized ABNase. CONCLUSION: Pectin hydrolysis by recombinant ABNase plays a role in the effective application of enzymatic cocktails for biomass saccharification.

Assembling a xylanase-lichenase chimera through all-atom molecular dynamics simulations.

Multifunctional enzyme engineering can improve enzyme cocktails for emerging biofuel technology. Molecular dynamics through structure-based models (SB) is an effective tool for assessing the tridimensional arrangement of chimeric enzymes as well as for inferring the functional practicability before experimental validation. This study describes the computational design of a bifunctional xylanase-lichenase chimera (XylLich) using the xynA and bglS genes from Bacillus subtilis. In silico analysis of the average solvent accessible surface area (SAS) and the root mean square fluctuation (RMSF) predicted a fully functional chimera, with minor fluctuations and variations along the polypeptide chains. Afterwards, the chimeric enzyme was built by fusing the xynA and bglS genes. XylLich was evaluated through small-angle X-ray scattering (SAXS) experiments, resulting in scattering curves with a very accurate fit to the theoretical protein model. The chimera preserved the biochemical characteristics of the parental enzymes, with the exception of a slight variation in the temperature of operation and the catalytic efficiency (kcat/Km). The absence of substantial shifts in the catalytic mode of operation was also verified. Furthermore, the production of chimeric enzymes could be more profitable than producing a single enzyme separately, based on comparing the recombinant protein production yield and the hydrolytic activity achieved for XylLich with that of the parental enzymes.

Development of hemicellulolytic enzyme mixtures for plant biomass deconstruction on target biotechnological applications.

An essential step in the conversion of lignocellulosic biomass to ethanol and other biorefinery products is conversion of cell wall polysaccharides into fermentable sugars by enzymatic hydrolysis. The objective of the present study was to understand the mode of action of hemicellulolytic enzyme mixtures for pretreated sugarcane bagasse (PSB) deconstruction and wheat arabinoxylan (WA) hydrolysis on target biotechnological applications. In this study, five hemicellulolytic enzymes-two endo-1,4-xylanases (GH10 and GH11), two α-L-arabinofuranosidases (GH51 and GH54), and one ß-xylosidase (GH43)-were submitted to combinatorial assays using the experimental design strategy, in order to analyze synergistic and antagonistic effects of enzyme interactions on biomass degradation. The xylooligosaccharides (XOSs) released from hydrolysis were analyzed by capillary electrophoresis and quantified by high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD). Based on this analysis, it was possible to define which enzymatic combinations favor xylose (X1) or XOS production and thus enable the development of target biotechnological applications. Our results demonstrate that if the objective is X1 production from WA, the best enzymatic combination is GH11 + GH54 + GH43, and for xylobiose (X2) production from WA, it is best to combine GH11 + GH51. However, if the goal is to produce XOS, the five enzymes used in WA hydrolysis are important, but for PSB hydrolysis, only GH11 is sufficient. If the final objective is bioethanol production, GH11 is responsible for hydrolyzing 64.3 % of hemicellulose from PSB. This work provides a basis for further studies on enzymatic mechanisms for XOS production, and the development of more efficient and less expensive enzymatic mixtures, targeting commercially viable lignocellulosic ethanol production and other biorefinery products.

Exploring the potential of a new thermotolerant xylanase from Rasamsonia composticola (XylRc): production using agro-residues, biochemical studies, and application to sugarcane bagasse saccharification.

Xylanases from thermophilic fungi have a wide range of commercial applications in the bioconversion of lignocellulosic materials and biobleaching in the pulp and paper industry. In this study, an endoxylanase from the thermophilic fungus Rasamsonia composticola (XylRc) was produced using waste wheat bran and pretreated sugarcane bagasse (PSB) in solid-state fermentation. The enzyme was purified, biochemically characterized, and used for the saccharification of sugarcane bagasse. XylRc was purified 30.6-fold with a 22% yield. The analysis using sodium dodecyl sulphate-polyacrylamide gel electrophoresis revealed a molecular weight of 53 kDa, with optimal temperature and pH values of 80 °C and 5.5, respectively. Thin-layer chromatography suggests that the enzyme is an endoxylanase and belongs to the glycoside hydrolase 10 family. The enzyme was stimulated by the presence of K+, Ca2+, Mg2+, and Co2+ and remained stable in the presence of the surfactant Triton X-100. XylRc was also stimulated by organic solvents butanol (113%), ethanol (175%), isopropanol (176%), and acetone (185%). The Km and Vmax values for oat spelt and birchwood xylan were 6.7 ± 0.7 mg/mL, 2.3 ± 0.59 mg/mL, 446.7 ± 12.7 µmol/min/mg, and 173.7 ± 6.5 µmol/min/mg, respectively. XylRc was unaffected by different phenolic compounds: ferulic, tannic, cinnamic, benzoic, and coumaric acids at concentrations of 2.5-10 mg/mL. The results of saccharification of PSB showed that supplementation of a commercial enzymatic cocktail (Cellic® CTec2) with XylRc (1:1 w/v) led to an increase in the degree of synergism (DS) in total reducing sugar (1.28) and glucose released (1.05) compared to the control (Cellic® HTec2). In summary, XylRc demonstrated significant potential for applications in lignocellulosic biomass hydrolysis, making it an attractive alternative for producing xylooligosaccharides and xylose, which can serve as precursors for biofuel production.

Dissecting structure-function-stability relationships of a thermostable GH5-CBM3 cellulase from Bacillus subtilis 168.

Cellulases participate in a number of biological events, such as plant cell wall remodelling, nematode parasitism and microbial carbon uptake. Their ability to depolymerize crystalline cellulose is of great biotechnological interest for environmentally compatible production of fuels from lignocellulosic biomass. However, industrial use of cellulases is somewhat limited by both their low catalytic efficiency and stability. In the present study, we conducted a detailed functional and structural characterization of the thermostable BsCel5A (Bacillus subtilis cellulase 5A), which consists of a GH5 (glycoside hydrolase 5) catalytic domain fused to a CBM3 (family 3 carbohydrate-binding module). NMR structural analysis revealed that the Bacillus CBM3 represents a new subfamily, which lacks the classical calcium-binding motif, and variations in NMR frequencies in the presence of cellopentaose showed the importance of polar residues in the carbohydrate interaction. Together with the catalytic domain, the CBM3 forms a large planar surface for cellulose recognition, which conducts the substrate in a proper conformation to the active site and increases enzymatic efficiency. Notably, the manganese ion was demonstrated to have a hyper-stabilizing effect on BsCel5A, and by using deletion constructs and X-ray crystallography we determined that this effect maps to a negatively charged motif located at the opposite face of the catalytic site.

N-acetylation of toxic aromatic amines by fungi: Strain screening, cytotoxicity and genotoxicity evaluation, and application in bioremediation of 3,4-dichloroaniline.

Aromatic amines (AA) are one of the most commonly used classes of compounds in industry and the most common pollutants found in both soil and water. 3,4-Dichloaniline (3,4-DCA) is a persistent residue of the phenylurea herbicide in the environment. In this study, we used a colorimetric method as a new approach to screen 12 filamentous fungal strains of the genera Aspergillus, Chaetomium, Cladosporium, and Mucor to assess their capacity to perform AA N-acetylation since it is considered a potential tool in environmental bioremediation. Subsequently, the selected strains were biotransformed with different AA substrates to evaluate the product yield. The strains Aspergillus niveus 43, Aspergillus terreus 31, and Cladosporium cladosporioides showed higher efficiencies in the biotransformation of 3,4-DCA at 500 µM into its N-acetylated product. These fungal strains also showed great potential to reduce the phytotoxicity of 3,4-DCA in experiments using Lactuca sativa seeds. Furthermore, N-acetylation was shown to be effective in reducing the cytotoxic and genotoxic effects of 3,4-DCA and other AA in the immortalized human keratinocyte (HaCaT) cell line. The isolated products after biotransformation showed that fungi of the genera Aspergillus and Cladosporium appeared to have N-acetylation as the first and main AA detoxification mechanism. Finally, A. terreus 31 showed the highest 3,4-DCA bioremediation potential, and future research can be carried out on the application of this strain to form microbial consortia with great potential for the elimination of toxic AA from the environment.

Molecular insights into substrate specificity and thermal stability of a bacterial GH5-CBM27 endo-1,4-ß-D-mannanase.

The breakdown of ß-1,4-mannoside linkages in a variety of mannan-containing polysaccharides is of great importance in industrial processes such as kraft pulp delignification, food processing and production of second-generation biofuels, which puts a premium on studies regarding the prospection and engineering of ß-mannanases. In this work, a two-domain ß-mannanase from Thermotoga petrophila that encompasses a GH5 catalytic domain with a C-terminal CBM27 accessory domain, was functionally and structurally characterized. Kinetic and thermal denaturation experiments showed that the CBM27 domain provided thermo-protection to the catalytic domain, while no contribution on enzymatic activity was observed. The structure of the catalytic domain determined by SIRAS revealed a canonical (α/ß)(8)-barrel scaffold surrounded by loops and short helices that form the catalytic interface. Several structurally related ligand molecules interacting with TpMan were solved at high-resolution and resulted in a wide-range representation of the subsites forming the active-site cleft with residues W134, E198, R200, E235, H283 and W284 directly involved in glucose binding.

Mode of operation and low-resolution structure of a multi-domain and hyperthermophilic endo-ß-1,3-glucanase from Thermotoga petrophila.

1,3-ß-Glucan depolymerizing enzymes have considerable biotechnological applications including biofuel production, feedstock-chemicals and pharmaceuticals. Here we describe a comprehensive functional characterization and low-resolution structure of a hyperthermophilic laminarinase from Thermotoga petrophila (TpLam). We determine TpLam enzymatic mode of operation, which specifically cleaves internal ß-1,3-glucosidic bonds. The enzyme most frequently attacks the bond between the 3rd and 4th residue from the non-reducing end, producing glucose, laminaribiose and laminaritriose as major products. Far-UV circular dichroism demonstrates that TpLam is formed mainly by beta structural elements, and the secondary structure is maintained after incubation at 90°C. The structure resolved by small angle X-ray scattering, reveals a multi-domain structural architecture of a V-shape envelope with a catalytic domain flanked by two carbohydrate-binding modules.

Functional and biophysical characterization of a hyperthermostable GH51 α-L-arabinofuranosidase from Thermotoga petrophila.

A hyperthermostable glycoside hydrolase family 51 (GH51) α-L-arabinofuranosidase from Thermotoga petrophila RKU-1 (TpAraF) was cloned, overexpressed, purified and characterized. The recombinant enzyme had optimum activity at pH 6.0 and 70°C with linear α-1,5-linked arabinoheptaose as substrate. The substrate cleavage pattern monitored by capillary zone electrophoresis showed that TpAraF is a classical exo-acting enzyme producing arabinose as its end-product. Far-UV circular dichroism analysis displayed a typical spectrum of α/ß barrel proteins analogously observed for other GH51 α-L-arabinofuranosidases. Moreover, TpAraF was crystallized in two crystalline forms, which can be used to determine its crystallographic structure.

High stabilization and hyperactivation of a Recombinant ß-Xylosidase through Immobilization Strategies.

Attainment of a stable and highly active ß-xylosidase is of major importance for the efficient and cost-competitive hydrolysis of hemicellulose xylan, as well as for its industrial conversion into biofuels and biochemicals. Here, a recombinant ß-xylosidase of the glycoside hydrolase family (GH43) from Bacillus subtilis was produced in Escherichia coli culture, purified, and subsequently immobilized on agarose and chitosan. Glutaraldehyde and glyoxyl groups were evaluated as activating agents to select the most efficient derivative. Multi-point immobilization on agarose led to an extraordinary thermal stability (half-lives 3604 and 164-fold higher than the free enzyme, at 50° and 35 °C, respectively). Even for chitosan activated with glutaraldehyde, a low-cost support, thermal stability of the immobilized enzyme was 326 and 12-fold higher than the free enzyme at 50° and 35°C, respectively. Immobilized enzymes showed no release of any subunit for the agarose-glyoxyl derivative, and only a few ones for the support activated with glutaraldehyde. Most remarkably, the enzyme kinetic behavior after immobilization increased up to 4-fold in relation to the free one. ß-xylosidase, a tetrameric enzyme with four identical subunits, exists in equilibrium between the monomeric and oligomeric forms in solution. Depending on the pH of immobilization, the enzyme oligomerization can be favored, thus explaining the hyperactivation phenomenon. Both glyoxyl-agarose and chitosan-glutaraldehyde derivatives were used to catalyze corncob xylan hydrolysis, reaching 72 % conversion, representing a xylose productivity of around 20 g L-1 h-1. After ten 4h-cycles (pH 6.0, 35 °C), the xylan-to-xylose conversion remained approximately unchanged. Therefore, the immobilized ß-xylosidases prepared in this work can be of great interest as biocatalysts in a biorefinery context.

Identification of a cold-adapted and metal-stimulated ß-1,4-glucanase with potential use in the extraction of bioactive compounds from plants.

Cold-adapted endo-ß-1,4-glucanases hold great potential for industrial processes requiring high activity at mild temperatures such as in food processing and extraction of bioactive compounds from plants. Here, we identified and explored the specificity, mode of action, kinetic behavior, molecular structure and biotechnological application of a novel endo-ß-1,4-glucanase (XacCel8) from the phytopathogen Xanthomonas citri subsp. citri. This enzyme belongs to an uncharacterized phylogenetic branch of the glycoside hydrolase family 8 (GH8) and specifically cleaves internal ß-1,4-linkages of cellulose and mixed-linkage ß-glucans releasing short cello-oligosaccharides ranging from cellobiose to cellohexaose. XacCel8 acts in near-neutral pHs and in a broad temperature range (10-50 °C), which are distinguishing features from conventional thermophilic ß-1,4-glucanases. Interestingly, XacCel8 was greatly stimulated by cobalt ions, which conferred higher conformational stability and boosted the enzyme turnover number. The potential application of XacCel8 was demonstrated in the caffeine extraction from guarana seeds, which improved the yield by 2.5 g/kg compared to the traditional hydroethanolic method (HEM), indicating to be an effective additive in this industrial process. Therefore, XacCel8 is a metal-stimulated and cold-adapted endo-ß-1,4-glucanase that could be applied in a diverse range of biotechnological processes under mild conditions such as caffeine extraction from guarana seeds.

Substrate cleavage pattern, biophysical characterization and low-resolution structure of a novel hyperthermostable arabinanase from Thermotoga petrophila.

Arabinan is a plant structural polysaccharide degraded by two enzymes; alpha-l-arabinofuranosidase and endo-1,5-alpha-l-arabinanase. These enzymes are highly diversified in nature, however, little is known about their biochemical and biophysical properties. We have characterized a novel arabinanase (AbnA) isolated from Thermotoga petrophila with unique thermostable properties such as the insignificant decrease of residual activity after incubation up to 90 degrees C. We determined the AbnA mode of operation through capillary zone electrophoresis, which accumulates arabinotriose and arabinobiose as end products after hydrolysis of arabinan-containing polysaccharides. Spectroscopic analyses by Far-UV circular dichroism and intrinsic tryptophan fluorescence emission demonstrated that AbnA is folded and formed mainly by beta-sheet structural elements. In silico molecular modeling showed that the AbnA structure encompasses a five-bladed beta-propeller catalytic core juxtaposed by distorted up-and-down beta-barrel domain. The low-resolution structure determined by small angle X-ray scattering indicated that AbnA is monomeric in solution and its molecular shape is in full agreement with the model.