In vitro Dissolution Testing of Rifampicin Powder Formulations For Prediction of Plasma Concentration-Time Profiles After Inhaled Delivery.

PURPOSE: The purpose of this study was to evaluate the in vitro lung dissolution of amorphous and crystalline powder formulations of rifampicin in polyethylene oxide (PEO) and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), and to predict the in vivo plasma concentration-time profiles using the in vitro data. METHODS: The in vitro dissolution and permeation profiles of respirable rifampicin particles were studied using a custom-made dissolution apparatus. Data from the in vitro dissolution test were used to estimate the parameters to be used as the input for the simulation of in vivo plasma concentration-time profiles using STELLA® software. For prediction of in vivo profiles, a one-compartment model either with a first order elimination or with a Michaelis-Menten kinetics-based elimination was used. RESULTS: Compared to the crystalline formulation, the amorphous formulation showed rapid in vitro dissolution suggesting their possible faster in vivo absorption and higher plasma concentrations of rifampicin following lung delivery. However, the simulations suggested that both powder formulations would result in similar plasma-concentration time profiles of rifampicin. CONCLUSIONS: Use of an in vitro dissolution test coupled with a simulation model for prediction of plasma-concentration time profiles of an inhaled drug was demonstrated in this work. These models can also be used in the design of inhaled formulations by controlling their release and dissolution properties to achieve desired lung retention or systemic absorption following delivery to the lungs.

Digital community assets: Investigating the impact of online engagement with arts and peer support groups on mental health during COVID-19.

The digitisation of mental health support has accelerated since the outbreak of the COVID-19 pandemic. This study investigated the impact of digital engagement with community assets on mental health during COVID-19. Digital engagement is typically not location-bound, but the restricted movement enforced during 'lockdowns' meant that people were primarily accessing digital community assets from their home environments. We report findings from a study utilising two creative workshops and semi-structured interviews to investigate how support operates in and through three digital community assets; an online peer support forum, a social enterprise running regular creative challenges nationally via social media and a local in-person creative arts support group. The concept of 'more or less digital' captures the ways that people's experiences of digital community assets extend beyond the platforms to incorporate settings of use. The analysis identifies how support is diluted through digital engagement, the value of minimal and muted forms of engagement and user-led designs for future hybrid forms of support. The article concludes by emphasising the importance of analysing digital community asset engagement in the settings of use and how such knowledge is vital for planning support in a future under continual pressure to be increasingly digital.

Dynamics and local environment of an aromatic counterion bound to di-chain cationic surfactant bilayers studied by avoided level crossing muon spin resonance: evidence for counterion condensation.

Avoided level crossing muon spin resonance (ALC-µSR) has been used to study the reorientational dynamics of muon-spin-labelled 2,4,6-trimethylbenzoate (246TMB-) counterions and their interaction with DODMAC (dioctadecyldimethylammonium chloride) bilayers in the Lα and Lß liquid crystalline states. The muoniated radical anion formed by the addition of muonium to the secondary carbons of the aromatic ring of 246TMB- is used as a local spin probe. The muon and methylene proton hyperfine parameters and the electron spin relaxation rate (λe) of the muoniated spin probe were determined as a function of temperature by modelling the ALC-µSR spectra with Monte Carlo numerical simulations. The observation of a Δ1 resonance indicates that 246TMB- is undergoing anisotropic motion and doesn't reside in the aqueous layer in either the Lα and Lß phases. The lack of an abrupt change in the hyperfine parameters or λe when the system goes from the Lß to the Lα lamellar liquid crystalline phases suggests that 246TMB- is located at the oil-water interface rather than within the bilayer. The hyperfine parameters indicate that 246TMB- is undergoing large amplitude reorientational motion about a preferred orientation resulting from the bilayer's electric field. The interaction between 246TMB- and the bilayer decreases and the amplitude of the wobbling-in-a-cone motion increases with increasing temperature. The temperature dependence of the electron spin relaxation rate indicates the barrier to reorientation is 41.7 kJ mol-1.

Markov Chain Modeling of Surfactant Critical Micelle Concentration and Surface Composition.

A Markov chain (MC) model has been used to model the following binary surfactant mixtures: linear alkylbenzenesulfonate (LAS4)/octaethylene glycol monododecyl ether (C12E8) at 10 and 25 °C, LAS6/acidic sophorolipid (AS), C12Betaine/C12Maltoside, sodium lauryl ether sulfate (SLES2)/C12E8, and rhamnolipid (R1)/LAS6. The critical micellar concentration and the composition of the adsorbed layer, for each system, can be modeled using the same monomer reactivity ratio values, g1 and g2. This implies that the interactions between the surfactants in the bulk solution and at the interface are the same, within error. For the LAS4/C12E8 system at 25 °C, the ranges of g1 and g2 values which can model both sets of data are within 0.03-0.05 and 1.55-2.10, respectively; g1 ≪ g2 implies that C12E8 is significantly more surface active than LAS4. The MC model indicates a negative change in the free energy upon mixing for all of the surfactant systems, consistent with the literature. The interfacial mixing behavior of LAS4/SLES2 is inferred from the results of the MC analysis of the LAS4/C12E8 and SLES2/C12E8 systems, which share a common surfactant partner in C12E8, and the prediction is in line with the published data.

Temporalities of mental distress: digital immediacy and the meaning of 'crisis' in online support.

The Internet is increasingly used to seek support by those suffering with mental distress (Bauman, S. and Rivers, I. Mental Health and the Digital Age. Basingstoke: Palgrave Macmillan; 2015). Drawing on research on a major online peer support forum, we analyse discussions around acute distress, self-harm and suicide. The paper argues that new temporalities of mental health 'crisis' are emerging through the intersection of the immediacy of online support, the chronicity of underlying distress and the punctuated nature of professional support. Online support adds a layer of temporal immediacy that does not traditionally feature in other forms of support (e.g. professional in-person services). This shifts the meaning of a mental health 'crisis' from acute to processual, and can lead to definitions of 'crisis' being used when not desired nor necessarily accurate. By attending to the layering of temporalities at the intersections of professional in-person, and online support, we demonstrate how parameters of crisis support are set - by whom, for whom and in relation to whose bodies. This has implications for professional clinical practice internationally in relation to the increased digitisation of support and the meanings of 'crisis' that emerge.

The influence of storage relative humidity on aerosolization of co-spray dried powders of hygroscopic kanamycin with the hydrophobic drug rifampicin.

The purpose of this study was to investigate the influence of storage humidity on in vitro aerosolization and physicochemical properties of co-spray dried powders of kanamycin with rifampicin. The powders were stored for one-month in an open Petri dish at different relative humidities (RHs) (15%, 43%, and 75%) and 25 ± 2 °C. The in vitro aerosolization (fine particle fraction, FPF) of the powders was determined by a next generation impactor (NGI). The moisture content, particle morphology and crystallinity of the powders were determined by Karl Fischer titration, scanning electron microscopy, and X-ray powder diffractometry, respectively. At all RH, the FPF of hydrophobic rifampicin-only powder was unaffected but the FPF of hygroscopic kanamycin-only powder significantly decreased even at 43% RH. The kanamycin-only particles fused together, crystallized and formed hard cakes at 75% RH. The aerosolization of kanamycin and rifampicin in the combination powders remained unaffected at 15% and 43% RH, but aerosolization significantly decreased at 75% RH. Enrichment of the surface of the particles with hydrophobic rifampicin did not protect the combination powders from moisture uptake but it prevented particle agglomeration up to 43% RH. At 75% RH, the moisture uptake led to agglomeration of the particles of the combination powder particles and consequently an increase in aerodynamic diameter. Further studies are required to investigate how rifampicin enrichment prevents particle agglomeration, the possible mechanisms (e.g. particle interactions due to capillary forces or electrostatic forces) for the changes in the aerosolization and changes in surface composition during storage.

Carrier-free combination dry powder inhaler formulation of ethionamide and moxifloxacin for treating drug-resistant tuberculosis.

This study aimed to develop a combination dry powder formulation of ethionamide and moxifloxacin HCl as this combination is synergistic against drug-resistant Mycobacterium tuberculosis (Mtb). L-leucine (20% w/w) was added in the formulations to maximize the process yield. Moxifloxacin HCl and/or ethionamide powders with/without L-leucine were produced using a Buchi Mini Spray-dryer. A next generation impactor was used to determine the in vitro aerosolization efficiency. The powders were also characterized for other physicochemical properties and cytotoxicity. All the spray-dried powders were within the aerodynamic size range of <5.0 µm except ethionamide-only powder (6.0 µm). The combination powders with L-leucine aerosolized better (% fine particle fraction (FPF): 61.3 and 61.1 for ethionamide and moxifloxacin, respectively) than ethionamide-only (%FPF: 9.0) and moxifloxacin-only (%FPF: 30.8) powders. The combination powder particles were collapsed with wrinkled surfaces whereas moxifloxacin-only powders were spherical and smooth and ethionamide-only powders were angular-shaped flakes. The combination powders had low water content (<2.0%). All the powders were physically stable at 15% RH and 25 ± 2 °C during 1-month storage and tolerated by bronchial epithelial cell-lines up to 100 µg/ml. The improved aerosolization of the combination formulation may be helpful for the effective treatment of drug-resistant tuberculosis. Further studies are required to understand the mechanisms for improved aerosolization and test the synergistic activity of the combination powder.

Temperature Resistant Binary SLES/Nonionic Surfactant Mixtures at the Air/Water Interface.

Surface compositions of adsorbed monolayers at the air/water interface, formed from binary surfactant mixtures in equilibrium, have been studied using neutron reflectivity at three discrete temperatures: 10, 25, and 40 °C. The binary compositions studied are sodium lauryl dodecyl ether sulfate (SLES EO3)/C12E n, where n = 6 and 8, at a fixed concentration of 2 mM with and without the addition of 0.1 M NaCl. Without NaCl, the nonionic surfactant dominates at the interface and nonideal mixing behavior is observed. This is modeled using the pseudophase approximation with a quadratic expansion of the free energy of mixing. The addition of 0.1 M NaCl screens the charge interaction between the surfactants and drives the surface composition of each system closer to that of the bulk composition. However, model fits to both the micelles and surface layers suggest that nonideal mixing is still taking place, although it is difficult to establish the extent of nonideality due to the limited data quality. The effect of temperature changes on the surface adsorption and composition of the surfactant mixtures is minimal and within error, with and without NaCl, but the critical micelle concentrations are significantly affected. This indicates the dominant influence of steric hindrances and surfactant charge interactions in determining interfacial behavior for these surfactants, relative to the temperature changes. The study also highlights the delicate effect of a relatively small change in the number of EO groups on mixing behavior.

Adsorption at the Air-Water Interface in Biosurfactant-Surfactant Mixtures: Quantitative Analysis of Adsorption in a Five-Component Mixture.

The composition of the air-water adsorbed layer of a quinary mixture consisting of three conventional surfactants, octaethylene glycol monododecyl ether (C12E8), dodecane-6-p-sodium benzene sulfonate (LAS6), and diethylene glycol monododecyl ether sodium sulfate (SLE2S), mixed with two biosurfactants, the rhamnolipids l-rhamnosyl-l-rhamnosyl-ß-hydroxydecanoyl-ß-hydroxydecanoyl, R2, and l-rhamnosyl-ß-hydroxydecanoyl-ß-hydroxydecanoyl, R1, has been measured over a range of compositions above the mixed critical micelle concentration. Additional measurements on some of the subsets of ternary and binary mixtures have also been measured by NR. The results have been analyzed using the pseudophase approximation (PPA) in conjunction with an excess free energy, GE, that depends on the quadratic and cubic terms in the composition. The compositions of the binary, ternary, and quinary mixtures could all be fitted to two sets of interaction parameters between the pairs of surfactants, one for micelles and one for adsorption. No ternary interactions or ternary corrections were required. Because the system contains two strongly anionic surfactants, the PPA can be extended, in practice, to ionic surfactants, contrary to the prevailing view. The values of the interaction parameters show that the quinary mixture, SLE2S-LAS6-C12E8-R1-R2, which is known to be a highly effective surfactant system, is characterized by a sequence of strong surface but weak micellar interactions. About half of the minima in GE for the strong surface interactions occur well away from the regular solution value of 0.5.

Impact of Electrolyte on Adsorption at the Air-Water Interface for Ternary Surfactant Mixtures above the Critical Micelle Concentration.

The composition of the air-water adsorbed layer of the ternary surfactant mixture, octaethylene monododecyl ether, C12E8, sodium dodecyl 6-benzenesulfonate, LAS, and sodium dioxyethylene glycol monododecyl sulfate, SLES, and of each of the binary mixtures, with varying amounts of electrolyte, has been studied by neutron reflectivity. The measurements were made above the mixed critical micelle concentration. In the absence of electrolyte adsorption is dominated by the nonionic component C12E8 but addition of electrolyte gradually changes this so that SLES and LAS dominate at higher electrolyte concentrations. The composition of the adsorbed layer in both binary and ternary mixtures can be quantitatively described using the pseudo-phase approximation with quadratic and cubic interactions in the excess free energy of mixing (GE) at both the surface and in the micelles. A single set of parameters fits all the experimental data. A similar analysis is effective for a mixture in which SDS replaces SLES. Addition of electrolyte weakens the synergistic SLES-C12E8 and LAS-C12E8 interactions, consistent with them being dominated by electrostatic interactions. The SLES-LAS (and SDS-LAS) interaction is moderately strong at the surface and is little affected by addition of electrolyte, suggesting that it is controlled by structural or packing factors. Most of the significant interactions in the mixtures are unsymmetrical with respect to composition, with the minimum in GE at the 1:2 or 2:1 composition. There is a small structural contribution to the LAS-C12E8 interaction that leads to a minimum intermediate in composition between 1:2 and 1:1 (LAS:C12E8) and to a significant residual GE in strong electrolyte.

Partitioning of 2-phenylethanol and limonene cosurfactants in C12E4.

Avoided level-crossing muon spin resonance (ALC-µSR) has been used to study the dynamics and local environment of spin probes formed by muonium (Mu) addition to 2-phenylethanol (PEA) and limonene (1-methyl-4-(1-methylethenyl)-cyclohexene) in an aqueous dispersion of the nonionic surfactant C12E4 (tetra(ethylene glycol) n-dodecyl ether). The spin probes derived from both cosurfactants reside within the micelles in the L1 phase and the bilayers in the Lα phase rather than in the aqueous region. The local polarity measured by the different isomers of the Mu adducts of PEA suggests there is a water gradient within the micelles and bilayers. Slow rotation of the micelles broadened the Δ1 resonances with increasing temperature in the L1 phase while narrower Δ1 resonances were observed in the Lα phase due to the rapid rotation of the spin probes around a preferred axis, which was wobbling within a cone.

Digital atmospheres: affective practices of care in Elefriends.

This article develops the concept of digital atmosphere to analyse the affective power of social media to shape practices of care and support for people living with mental distress. Using contemporary accounts of affective atmospheres, the article focuses on feelings of distress, support and care that unfold through digital atmospheres. The power of social media intersects with people's support and care-seeking practices in multiple ways and not in a straightforward model of 'accessing or providing support'. Indeed, we find that the caring relations developed through social media often need to be cared for themselves. The article draws on online and interview data from a larger project investigating how practices of care and support are (re)configured in the mental health-related social media site Elefriends. Users have to negotiate the disruption of moving support online, as well as the possibility of becoming subject to a fragility in care, in which caring for oneself becomes bound up in the ambiguities of caring for others. We argue that understanding how experiences of distress are shaped by social media is essential for understanding the implications of the increased digitisation of mental healthcare.

Pharmacokinetics of Abamectin/Levamisole Combination in a Medium Chain Mono and Diglyceride-Based Vehicle and an In Vitro Release and In Vitro In Vivo Correlation Study for Levamisole.

A combination of lipophilic and hydrophilic drugs in a single solution is a challenge due to their different physicochemical properties. In vitro and in vivo release studies are useful to optimize this solution. The in vitro (Franz diffusion cell) release rate of levamisole phosphate from an isotropic vehicle of medium chain mono and diglycerides (MCMDG) was significantly slower than the release from water. The injectable solution of the isotropic MCMDG-based system was prepared with 13.65% of levamisole phosphate and 0.5% of abamectin. Two milliliters/50 kg (0.04 ml/kg) was injected subcutaneously into five healthy adult sheep. None of the animals showed the signs of inflammation at injection site. Both drugs were assayed using validated HPLC methods. The absorption rates for levamisole (0.71 ± 0.32 h-1) and abamectin (0.24 ± 0.08 day-1) from the MCMDG-based formulation were considerably slower than those of other studies conducted on the commercial products. The tmax was delayed for levamisole (2.20 ± 0.45 h) and abamectin (4.20 ± 1.64 days) compared with those in published studies. Longer MRT values for levamisole (6.14 ± 1.14 h) and abamectin (8.80 ± 1.39 days) were found in this study compared to those reported. A correlation was observed between in vivo fraction absorbed and in vitro fraction released for levamisole phosphate in the MCMDG-based formulation. The injection vehicle of isotropic MCMDG-based system delayed the subcutaneous absorption of levamisole phosphate and abamectin compared to the commercial subcutaneous injection products for levamisole and abamectin. Notably, this isotropic MCMDG-based vehicle system is prepared with a combination of two drugs with different physicochemical properties.

The influence of bile salts on the response of liposomes to ultrasound.

CONTEXT: Triggering drug release from delivery vehicles with ultrasound has potential applications in targeted drug delivery. It was hypothesized that the addition of bile salts would increase the sensitivity of liposomes to ultrasound through creation of defects. OBJECTIVE: The aim of this study was to investigate whether incorporating bile salts into liposomes would lead to differential effects on their response to low and high frequency ultrasound. MATERIALS AND METHODS: Cholate, chenodeoxycholate, ursodeoxycholate, glycocholate and taurocholate were the selected bile salts. Response to ultrasound was characterized by measuring the release of carboxyfluorescein (CF). RESULTS: At 30 kHz ultrasound, taurocholate containing liposomes were most responsive and released 70% (± 2) CF after 30 seconds of sonication. Compared to this, liposomes that did not contain bile salts released just 7% (± 2). At 1.1 MHz ultrasound, all liposome formulations were unresponsive. To increase the response of liposomes at 1.1 MHz ultrasound, a combination of membrane destabilizers were added to DSPC liposomes. DOPE, a hexagonal phase lipid was used in combination with taurocholate. Surprisingly, liposomes containing DOPE and taurocholate were more resistant to 1.1 MHz ultrasound than ones containing only DOPE. DISCUSSION: This suggests that the sensitivity of liposomes towards ultrasound may not simply be defined by a single membrane component but instead depends on the interaction between constituting lipid components. Furthermore, strategies other than membrane destabilization may be required to sensitize liposomes towards high frequency ultrasound. CONCLUSION: Bile salts may be used to increase or decrease the sensitivity of liposomes to low frequency ultrasound.

Signaled drug delivery and transport across the blood-brain barrier.

We use a mathematical model to describe the delivery of a drug to a specific region of the brain. The drug is carried by liposomes that can release their cargo by application of focused ultrasound (US). Thereupon, the drug is absorbed through the endothelial cells that line the brain capillaries and form the physiologically important blood-brain barrier (BBB). We present a compartmental model of a capillary that is able to capture the complex binding and transport processes the drug undergoes in the blood plasma and at the BBB. We apply this model to the delivery of levodopa (L-dopa, used to treat Parkinson's disease) and doxorubicin (an anticancer agent). The goal is to optimize the delivery of drug while at the same time minimizing possible side effects of the US.

Adsorption of Hydrophobin-Protein Mixtures at the Air-Water Interface: The Impact of pH and Electrolyte.

The adsorption of the proteins ß-casein, ß-lactoglobulin, and hydrophobin, and the protein mixtures of ß-casein/hydrophobin and ß-lactoglobulin/hydrophobin have been studied at the air-water interface by neutron reflectivity, NR. Changing the solution pH from 7 to 2.6 has relatively little impact on the adsorption of hydrophobin or ß-lactoglobulin, but results in a substantial change in the structure of the adsorbed layer of ß-casein. In ß-lactoglobulin/hydrophobin mixtures, the adsorption is dominated by the hydrophobin adsorption, and is independent of the hydrophobin or ß-lactoglobulin concentration and solution pH. At pH 2.6, the adsorption of the ß-casein/hydrophobin mixtures is dominated by the hydrophobin adsorption over the range of ß-casein concentrations studied. At pH 4 and 7, the adsorption of ß-casein/hydrophobin mixtures is dominated by the hydrophobin adsorption at low ß-casein concentrations. At higher ß-casein concentrations, ß-casein is adsorbed onto the surface monolayer of hydrophobin, and some interpenetration between the two proteins occurs. These results illustrate the importance of pH on the intermolecular interactions between the two proteins at the interface. This is further confirmed by the impact of PBS, phosphate buffered saline, buffer and CaCl2 on the coadsorption and surface structure. The results provide an important insight into the adsorption properties of protein mixtures and their application in foam and emulsion stabilization.

Multivalent-Counterion-Induced Surfactant Multilayer Formation at Hydrophobic and Hydrophilic Solid-Solution Interfaces.

Surface multilayer formation from the anionic-nonionic surfactant mixture of sodium dodecyl dioxyethylene sulfate, SLES, and monododecyl dodecaethylene glycol, C12E12, by the addition of multivalent Al(3+) counterions at the solid-solution interface is observed and characterized by neutron reflectivity, NR. The ability to form surface multilayer structures on hydrophobic and hydrophilic silica and cellulose surfaces is demonstrated. The surface multilayer formation is more pronounced and more well developed on the hydrophilic and hydrophobic silica surfaces than on the hydrophilic and hydrophobic cellulose surfaces. The less well developed multilayer formation on the cellulose surfaces is attributed to the greater surface inhomogeneities of the cellulose surface which partially inhibit lateral coherence and growth of the multilayer domains at the surface. The surface multilayer formation is associated with extreme wetting properties and offers the potential for the manipulation of the solid surfaces for enhanced adsorption and control of the wetting behavior.

Adsorption at air-water and oil-water interfaces and self-assembly in aqueous solution of ethoxylated polysorbate nonionic surfactants.

The Tween nonionic surfactants are ethoxylated sorbitan esters, which have 20 ethylene oxide groups attached to the sorbitan headgroup and a single alkyl chain, lauryl, palmityl, stearyl, or oleyl. They are an important class of surfactants that are extensively used in emulsion and foam stabilization and in applications associated with foods, cosmetics and pharmaceuticals. A range of ethoxylated polysorbate surfactants, with differing degrees of ethoxylation from 3 to 50 ethylene oxide groups, have been synthesized and characterized by neutron reflection, small-angle neutron scattering, and surface tension. In conjunction with different alkyl chain groups, this provides the opportunity to modify their surface properties, their self-assembly in solution, and their interaction with macromolecules, such as proteins. Adsorption at the air-water and oil-water interfaces and solution self-assembly of the range of ethoxylated polysorbate surfactants synthesized are presented and discussed.

Kinetic and equilibrium studies of bile salt-liposome interactions.

Research has suggested that exposure to sub-micellar concentrations of bile salts (BS) increases the permeability of lipid bilayers in a time-dependent manner. In this study, incubation of soy phosphatidylcholine small unilamellar vesicles (liposomes) with sub-micellar concentrations of cholate (C), deoxycholate (DC), 12-monoketocholate (MKC) or taurocholate (TC) in pH 7.2 buffer increased membrane fluidity and negative zeta potential in the order of increasing BS liposome-pH 7.2 buffer distribution coefficients (MKC < C ≈ TC < DC). In liposomes labeled with the dithionite-sensitive fluorescent lipid N-(7-nitrobenz-2-oxa-1,3-diazol-4-yl)phosphatidylethanolamine (NBD-PE) in both leaflets and equilibrated with sub-micellar concentrations of BS, fluorescence decline during continuous exposure to dithionite was biphasic involving a rapid initial phase followed by a slower second phase. Membrane permeability to dithionite as measured by the rate of the second phase increased in the order control < MKC < TC ∼ C < DC. In liposomes labeled with NBD-PE in the inner leaflet only and incubated with the same concentrations of C, DC and MKC, membrane permeability to dithionite initially increased very rapidly in the order MKC < C < DC before impermeability to dithionite was restored after which fluorescence decline was consistent with NBD-PE flip-flop. For liposomes incubated with TC, membrane permeability to dithionite was only slightly increased and the decline in fluorescence was mainly the result of NBD-PE flip-flop. These results provide evidence that BS interact with lipid bilayers in a time-dependent manner that is different for conjugated and unconjugated BS. MKC appears to cause least disturbance to liposomal membranes but, when the actual MKC concentration in liposomes is taken into account, MKC is actually the most disruptive.

Stability of penethamate, a benzylpenicillin ester prodrug, in oily vehicles.

Penethamate (PNT) is an ester prodrug of benzylpenicillin which is marketed as dry powder for reconstitution with aqueous vehicle prior to injection. The purpose of this paper was to investigate the chemical stability of PNT in oily formulations to provide a basis for a ready-to-use (RTU) oil-based PNT formulation. The chemical stability of PNT solutions and suspensions in light liquid paraffin (LP), medium chain triglyceride (MIG), ethyl oleate (EO) and sunflower oil (SO) was investigated at 30 °C. Solid state stability of PNT powder and stability of PNT in EO suspensions with different moisture contents were also evaluated. The solubility of PNT in the oils was in order SO > EO > MIG > LP. Degradation of PNT was rapid in oily solutions and less than 10% remained after 7-15 days. Stability of PNT decreased with increase in moisture content in ethyl oleate suspensions. PNT was stable over four weeks in the solid state. Hydrolysis, due to moisture in the oil formulation is not the only degradation mechanism. PNT stability (% drug remaining) in oily suspensions after 3.5 months was in the order LP (96.2%) > MIG (95.4%) > EO (94.1%) > SO (86%). A shelf-life of up to 5.5 years at 30 °C may be achieved for PNT suspension in these oils.