The tripartite architecture of the eukaryotic integral membrane protein zinc metalloprotease Ste24.

Ste24 enzymes, a family of eukaryotic integral membrane proteins, are zinc metalloproteases (ZMPs) originally characterized as "CAAX proteases" targeting prenylated substrates, including a-factor mating pheromone in yeast and prelamin A in humans. Recently, Ste24 was shown to also cleave nonprenylated substrates. Reduced activity of the human ortholog, HsSte24, is linked to multiple disease states (laminopathies), including progerias and lipid disorders. Ste24 possesses a unique "α-barrel" structure consisting of seven transmembrane (TM) α-helices encircling a large intramembranous cavity (~14 000 Å3 ). The catalytic zinc, coordinated via a HExxH…E/H motif characteristic of gluzincin ZMPs, is positioned at one of the cavity's bases. The interrelationship between Ste24 as a gluzincin, a long-studied class of soluble ZMPs, and as a novel cavity-containing integral membrane protein protease has been minimally explored to date. Informed by homology to well-characterized soluble, gluzincin ZMPs, we develop a model of Ste24 that provides a conceptual framework for this enzyme family, suitable for development and interpretation of structure/function studies. The model consists of an interfacial, zinc-containing "ZMP Core" module surrounded by a "ZMP Accessory" module, both capped by a TM helical "α-barrel" module of as yet unknown function. Multiple sequence alignment of 58 Ste24 orthologs revealed 38 absolutely conserved residues, apportioned unequally among the ZMP Core (18), ZMP Accessory (13), and α-barrel (7) modules. This Tripartite Architecture representation of Ste24 provides a unified image of this enzyme family.

Specificity-directed design of a FRET-quenched heptapeptide for assaying thermolysin-like proteases.

Thermolysin (TL) is an industrially important zinc endopeptidase, and the prototype of the M4 family of metallopeptidases. The catalytic function of TL and its relatives is typically assessed using chromogenic or more sensitive fluorescent peptides, with the latter substrates relying on Förster resonance energy transfer (FRET). Here, we demonstrate that a FRET-quenched heptapeptide designed on the basis of the enzyme's substrate specificity (Dabcyl-FKFLGKE-EDANS) is efficiently cleaved by TL and dispase (a TL-like protease) in between the Phe3 and Leu4 residues. The specificity constants (determined at pH 7.4 and 25 °C) for TL and dispase (3.6 × 106 M-1 s-1 and 4.6 × 106 M-1 s-1, respectively) were found to be amongst the highest documented for any TL substrate. Maximal peptide cleavage rates were achieved at pH 6.5 and a temperature of 65 °C. In view of the sensitivity of the assay, concentrations as low as 10 pM TL could be detected. Furthermore, the rate of hydrolysis of Dabcyl-FKFLGKE-EDANS was slow or immeasurable with some other unrelated metallo-, serine- and cysteine proteases, suggesting that the peptide has the potential to serve as a selective substrate for TL and TL-like proteases.

The extremophile Anoxybacillus sp. PC2 isolated from Brazilian semiarid region (Caatinga) produces a thermostable keratinase.

The aim of this study was to select and identify thermophilic bacteria from Caatinga biome (Brazil) able to produce thermoactive keratinases and characterize the keratinase produced by the selected isolate. After enrichment in keratin culture media, an Anoxybacillus caldiproteolyticus PC2 was isolated. This thermotolerant isolate presents a remarkable feature producing a thermostable keratinase at 60°C. The partially purified keratinase, identified as a thermolysin-like peptidase, was active at a pH range of 5.0-10.0 with maximal activity at a temperature range of 50-80°C. The optimal activity was observed at pH 7.0 and 50-60°C. These characteristics are potentially useful for biotechnological purposes such as processing and bioconversion of keratin.

High-throughput protein nanopatterning.

High-throughput and large-scale patterning of enzymes with sub-10 nm resolution, the size range of individual protein molecules, is crucial for propelling advancement in a variety of areas, from the development of chip-based biomolecular nano-devices to molecular-level studies of cell biology. Despite recent developments in bio-nanofabrication technology, combining 10 nm resolution with high-throughput and large-scale patterning of enzymes is still an open challenge. Here, we demonstrate a high resolution and high-throughput patterning method to generate enzyme nanopatterns with sub-10 nm resolution by using thermochemical scanning probe lithography (tc-SPL). First, tc-SPL is used to generate amine patterns on a methacrylate copolymer film. Thermolysin enzymes functionalized with sulfonate-containing fluorescent labels (Alexa-488) are then directly immobilized onto the amine patterns through electrostatic interaction. Enzyme patterns with sub-10 nm line width are obtained as evidenced by atomic force microscopy (AFM) and fluorescence microscopy. Moreover, we demonstrate large-scale and high throughput (0.13 × 0.1 mm2 at a throughput of 5.2 × 104 µm2 h-1) patterning of enzymes incorporating 10 nm detailed pattern features. This straightforward and high-throughput method of fabricating enzyme nanopatterns will have a significant impact on future bio-nanotechnology applications and molecular-level biological studies. By scaling up using parallel probes, tc-SPL is promising for implementation to scale up the fabrication of nano-biodevices.

Bioactive Peptide Brush Polymers via Photoinduced Reversible-Deactivation Radical Polymerization.

Harnessing metal-free photoinduced reversible-deactivation radical polymerization (photo-RDRP) in organic and aqueous phases, we report a synthetic approach to enzyme-responsive and pro-apoptotic peptide brush polymers. Thermolysin-responsive peptide-based polymeric amphiphiles assembled into spherical micellar nanoparticles that undergo a morphology transition to worm-like micelles upon enzyme-triggered cleavage of coronal peptide sidechains. Moreover, pro-apoptotic polypeptide brushes show enhanced cell uptake over individual peptide chains of the same sequence, resulting in a significant increase in cytotoxicity to cancer cells. Critically, increased grafting density of pro-apoptotic peptides on brush polymers correlates with increased uptake efficiency and concurrently, cytotoxicity. The mild synthetic conditions afforded by photo-RDRP, make it possible to access well-defined peptide-based polymer bioconjugate structures with tunable bioactivity.

Complete solubilization of cartilage using the heat-stable protease thermolysin for comprehensive GAG analysis.

Articular cartilage comprises collagens, proteoglycans, and glycosaminoglycans (GAGs) together with water, in hyaline matrixes. Articular cartilage is resistant to proteolytic solubilization for comprehensive GAG analyses partly because of assemblies of collagen fibers with thermolabile hydrogen bonds. In this study, we used the heat-stable protease thermolysin to digest collagen in solid articular cartilage at 70 °C and compared the efficiencies of collagen digestion and GAG extraction to those with collagenase digestion at 50 °C. Overnight digestion with thermolysin completely solubilized cartilage, whereas collagenase with >10-times higher proteolytic activity digested <20% of collagen. Following thermolysin treatments, almost all GAGs were extracted from the cartilage, whereas only 56% of GAGs were extracted after collagenase digestion. Disaccharide analyses of extracted GAG chains revealed >98% extraction efficiencies of several GAG classes from thermolysin-treated cartilage, compared with <60% extraction efficiencies using collagenase, depending on GAG classes. These results indicate that thermolysin allows complete GAG extraction from solid articular cartilage and that complete solubilization is required for accurate and reproducible analyses of cartilage GAGs. Hence, thermolysin offers a tool for complete solubilization of cartilage prior to comprehensive GAGomic analysis, and is likely applicable to other collagen-rich tissues such as ligaments, skin, and blood vessels.

Discovery of Nicotinamide Adenine Dinucleotide Binding Proteins in the Escherichia coli Proteome Using a Combined Energetic- and Structural-Bioinformatics-Based Approach.

Protein-ligand interaction plays a critical role in regulating the biochemical functions of proteins. Discovering protein targets for ligands is vital to new drug development. Here, we present a strategy that combines experimental and computational approaches to identify ligand-binding proteins in a proteomic scale. For the experimental part, we coupled pulse proteolysis with filter-assisted sample preparation (FASP) and quantitative mass spectrometry. Under denaturing conditions, ligand binding affected protein stability, which resulted in altered protein abundance after pulse proteolysis. For the computational part, we used the software Patch-Surfer2.0. We applied the integrated approach to identify nicotinamide adenine dinucleotide (NAD)-binding proteins in the Escherichia coli proteome, which has over 4200 proteins. Pulse proteolysis and Patch-Surfer2.0 identified 78 and 36 potential NAD-binding proteins, respectively, including 12 proteins that were consistently detected by the two approaches. Interestingly, the 12 proteins included 8 that are not previously known as NAD binders. Further validation of these eight proteins showed that their binding affinities to NAD computed by AutoDock Vina are higher than their cognate ligands and also that their protein ratios in the pulse proteolysis are consistent with known NAD-binding proteins. These results strongly suggest that these eight proteins are indeed newly identified NAD binders.

Evaluation of disulfide scrambling during the enzymatic digestion of bevacizumab at various pH values using mass spectrometry.

Disulfide linkages play an important role in protein stability and activity. Thus, it is critical to characterize disulfide bonds to ensure the quality and function of protein pharmaceuticals. There are, however, problems associated with maintaining disulfide linkages in the conventional procedures that are used to digest a protein. In order to preserve enzyme activity during the digestion of a protein, it is commonly carried out at neutral to basic environment which increases the possibilities of disulfide bond scrambling. However, it is not easy to differentiate whether the scrambled disulfide linkages are initiated by the sample itself or whether they are induced during the protease digestion process. In this study, the optimum pH for minimizing disulfide bond rearrangements during the digestion process was determined. Three sets of proteases, trypsin plus Glu-C, Lys-C and thermolysin were used, followed by dimethyl labeling and mass spectrometry for a bevacizumab (Avastin) disulfide linkage analysis. No disulfide linkage scrambling was detected at pH6 when Lys-C or trypsin plus Glu-C were used as enzymes. When thermolysin was applied, some scrambled disulfide bonds were identified at pH5, 6 and 7. Nevertheless, there was less disulfide bond scrambling at a lower pH. All correct disulfide bonds on bevacizumab could be identified using this approach. The results demonstrated that by choosing the proper enzymes, using a lower pH environment for the digestion could reduce the degree of artifact disulfide scrambling.

Three easy pieces.

BACKGROUND: Differential scanning calorimetry is a powerful method that provides a complete thermodynamic characterization of the stability of a protein as a function of temperature. There are, however, circumstances that preclude a complete analysis of DSC data. The most common ones are irreversible denaturation transitions or transitions that take place at temperatures that are beyond the temperature limit of the instrument. Even for a protein that undergoes reversible thermal denaturation, the extrapolation of the thermodynamic data to lower temperatures, usually 25°C, may become unreliable due to difficulties in the determination of ΔCp. METHODS: The combination of differential scanning calorimetry and isothermal chemical denaturation allows reliable thermodynamic analysis of protein stability under less than ideal conditions. RESULTS AND CONCLUSIONS: This paper demonstrates how DSC can be used in combination with chemical denaturation to address three different scenarios: 1) estimation of an accurate ΔCp value for a reversible denaturation using as a test system the envelope HIV-1 glycoprotein gp120; 2) determination of the Gibbs energy of stability in the region in which thermal denaturation is irreversible using HEW lysozyme at different pH values; and, 3) determination of Gibbs energy of stability for a thermostable protein, thermolysin.

How Nothing Boosts Affinity: Hydrophobic Ligand Binding to the Virtually Vacated S1' Pocket of Thermolysin.

We investigated the hydration state of the deep, well-accessible hydrophobic S1' specificity pocket of the metalloprotease thermolysin with purposefully designed ligands using high-resolution crystallography and isothermal titration calorimetry. The S1' pocket is known to recognize selectively a very stringent set of aliphatic side chains such as valine, leucine, and isoleucine of putative substrates. We engineered a weak-binding ligand covering the active site of the protease without addressing the S1' pocket, thus transforming it into an enclosed cavity. Its sustained accessibility could be proved by accommodating noble gas atoms into the pocket in the crystalline state. The topology and electron content of the enclosed pocket with a volume of 141 Å3 were analyzed using an experimental MAD-phased electron density map that was calibrated to an absolute electron number scale, enabling access to the total electron content within the cavity. Our analysis indicates that the S1' pocket is virtually vacated, thus free of any water molecules. The thermodynamic signature of the reduction of the void within the pocket by growing aliphatic P1' substituents (H, Me, iPr, iBu) reveals a dramatic, enthalpy-dominated gain in free energy of binding resulting in a factor of 41 000 in Kd for the H-to-iBu transformation. Substituents placing polar decoy groups into the pocket to capture putatively present water molecules could not collect any evidence for a bound solvent molecule.

Accurate macromolecular structures using minimal measurements from X-ray free-electron lasers.

X-ray free-electron laser (XFEL) sources enable the use of crystallography to solve three-dimensional macromolecular structures under native conditions and without radiation damage. Results to date, however, have been limited by the challenge of deriving accurate Bragg intensities from a heterogeneous population of microcrystals, while at the same time modeling the X-ray spectrum and detector geometry. Here we present a computational approach designed to extract meaningful high-resolution signals from fewer diffraction measurements.

Impact of the environmental conditions and substrate pre-treatment on whey protein hydrolysis: A review.

Proteins in solution are subject to myriad forces stemming from interactions with each other as well as with the solvent media. The role of the environmental conditions, namely pH, temperature, ionic strength remains under-estimated yet it impacts protein conformations and consequently its interaction with, and susceptibility to, the enzyme. Enzymes, being proteins are also amenable to the environmental conditions because they are either activated or denatured depending on the choice of the conditions. Furthermore, enzyme specificity is restricted to a narrow regime of optimal conditions while opportunities outside the optimum conditions remain untapped. In addition, the composition of protein substrate (whether mixed or single purified) have been underestimated in previous studies. In addition, protein pre-treatment methods like heat denaturation prior to hydrolysis is a complex phenomenon whose progression is influenced by the environmental conditions including the presence or absence of sugars like lactose, ionic strength, purity of the protein, and the molecular structure of the mixed proteins particularly presence of free thiol groups. In this review, we revisit protein hydrolysis with a focus on the impact of the hydrolysis environment and show that preference of peptide bonds and/or one protein over another during hydrolysis is driven by the environmental conditions. Likewise, heat-denaturing is a process which is dependent on not only the environment but the presence or absence of other proteins.

Impact of Surface Water Layers on Protein--Ligand Binding: How Well Are Experimental Data Reproduced by Molecular Dynamics Simulations in a Thermolysin Test Case?

Drug binding involves changes of the local water structure around proteins including water rearrangements across surface-solvation layers around protein and ligand portions exposed to the newly formed complex surface. For a series of thermolysin-binding phosphonamidates, we discovered that variations of the partly exposed P2'-substituents modulate binding affinity up to 10 kJ mol(-1) with even larger enthalpy/entropy partitioning of the binding signature. The observed profiles cannot be completely explained by desolvation effects. Instead, the quality and completeness of the surface water network wrapping around the formed complexes provide an explanation for the observed structure-activity relationship. We used molecular dynamics to compute surface water networks and predict solvation sites around the complexes. A fairly good correspondence with experimental difference electron densities in high-resolution crystal structures is achieved; in detail some problems with the potentials were discovered. Charge-assisted contacts to waters appeared as exaggerated by AMBER, and stabilizing contributions of water-to-methyl contacts were underestimated.

Selective isolation of hydrophobin SC3 by solid-phase extraction with polytetrafluoroethylene microparticles and subsequent mass spectrometric analysis.

Hydrophobins are small proteins that play a role in a number of processes during the filamentous fungi growth and development. These proteins are characterized by the self-assembly of their molecules into an amphipathic membrane at hydrophilic-hydrophobic interfaces. Isolation and purification of hydrophobins generally present a challenge in their analysis. Hydrophobin SC3 from Schizophyllum commune was selected as a representative of class I hydrophobins in this work. A novel procedure for selective and effective isolation of hydrophobin SC3 based on solid-phase extraction with polytetrafluoroethylene microparticles loaded in a small self-made microcolumn is reported. The tailored binding of hydrophobins to polytetrafluoroethylene followed by harsh elution conditions resulted in a highly specific isolation of hydrophobin SC3 from the model mixture of ten proteins. The presented isolation protocol can have a positive impact on the analysis and utilization of these proteins including all class I hydrophobins. Hydrophobin SC3 was further subjected to reduction of its highly stable disulfide bonds and to chymotryptic digestion followed by mass spectrometric analysis. The isolation and digestion protocols presented in this work make the analysis of these highly hydrophobic and compact proteins possible.

Involvement of Val 315 located in the C-terminal region of thermolysin in its expression in Escherichia coli and its thermal stability.

Thermolysin is a thermophilic and halophilic zinc metalloproteinase that consists of ß-rich N-terminal (residues 1-157) and α-rich C-terminal (residues 158-316) domains. Expression of thermolysin variants truncated from the C-terminus was examined in E. coli culture. The C-terminal Lys316 residue was not significant in the expression, but Val315 was critical. Variants in which Val315 was substituted with fourteen amino acids were prepared. The variants substituted with hydrophobic amino acids such as Leu and Ile were almost the same as wild-type thermolysin (WT) in the expression amount, α-helix content, and stability. Variants with charged (Asp, Glu, Lys, and Arg), bulky (Trp), or small (Gly) amino acids were lower in these characteristics than WT. All variants exhibited considerably high activities (50-100% of WT) in hydrolyzing protein and peptide substrates. The expression amount, helix content, and stability of variants showed good correlation with hydropathy indexes of the amino acids substituted for Val315. Crystallographic study of thermolysin has indicated that V315 is a member of the C-terminal hydrophobic cluster. The results obtained in the present study indicate that stabilization of the cluster increases thermolysin stability and that the variants with higher stability are expressed more in the culture. Although thermolysin activity was not severely affected by the variation at position 315, the stability and specificity were modified significantly, suggesting the long-range interaction between the C-terminal region and active site.

MeshAndCollect: an automated multi-crystal data-collection workflow for synchrotron macromolecular crystallography beamlines.

Here, an automated procedure is described to identify the positions of many cryocooled crystals mounted on the same sample holder, to rapidly predict and rank their relative diffraction strengths and to collect partial X-ray diffraction data sets from as many of the crystals as desired. Subsequent hierarchical cluster analysis then allows the best combination of partial data sets, optimizing the quality of the final data set obtained. The results of applying the method developed to various systems and scenarios including the compilation of a complete data set from tiny crystals of the membrane protein bacteriorhodopsin and the collection of data sets for successful structure determination using the single-wavelength anomalous dispersion technique are also presented.

Asymmetric dimethylarginine (ADMA) in human blood: effects of extended haemodialysis in the critically ill patient with acute kidney injury, protein binding to human serum albumin and proteolysis by thermolysin.

Free, non-protein bound asymmetrically guanidine-dimethylated arginine (ADMA) is an endogenous inhibitor of nitric oxide (NO) synthesis. Human erythrocytic membrane comprises considerable amounts of large (>50 kDa) ADMA-containing proteins. Location in the erythrocyte membrane and identity and physiological functions of ADMA-containing proteins are unrevealed. In healthy subjects, the concentration of free ADMA in heparinised plasma is almost identical to that of serum. We hypothesised that the robustness of free ADMA concentration in human blood is due to a remarkable resistance of erythrocytic ADMA-containing proteins against proteases. In vivo, we investigated the course of the concentration of ADMA in serum and EDTA plasma of a critically ill patient with acute kidney injury during extended haemodialysis. In vitro, we studied the effects of thermolysin, a useful experimental proteolytic enzyme of erythrocyte membrane proteins, on erythrocytic ADMA. The protein binding (PB) of ADMA to human serum albumin (HSA) was also determined. In these studies, ADMA was measured by a previously reported, fully validated GC-MS/MS method. We measured almost identical ADMA concentrations in plasma and serum samples of the patient. During dialysis, the circulating ADMA concentration decreased slowly and moderately indicating removal of this substance, which was however much less than expected from its low molecular weight (202 Da) and high water solubility. After dialysis, circulating ADMA concentration increased again, a phenomenon called rebound, and ADMA reached higher levels compared to the baseline. The PB value of ADMA to HSA was about 30 %. This surprisingly high PB value of ADMA to HSA may be an explanation for the rather poor dialysance of ADMA. Washed human erythrocytes suspended in phosphate-buffered physiological saline were found not to release appreciable amounts of free and ADMA-containing proteins. The lack of effect of coagulation or anticoagulation on the concentration of circulating free ADMA in humans is likely to be due to a remarkable resistance of ADMA-containing proteins in the erythrocyte membrane against proteases in vivo in humans. Our study suggests that free ADMA is released in the circulating blood at relatively high rates. The considerable PB of ADMA to HSA is likely to add to the apparently poor dialysability of ADMA. Other contributing factors could be redistribution of free ADMA between plasma and erythrocytes in favour of plasma ADMA and parallel formation of free ADMA from erythrocytic ADMA-containing proteins during haemodialysis.

Follicles of various maturation stages react differently to enzymatic isolation: a comparison of different isolation protocols.

Isolation of human follicles is based on digestion of the tissue by combinations of enzymes. Follicle vitality and morphology are often based on the analysis of pooled follicles of different maturation stages. Information is therefore lacking on the effect of the isolation protocol to individual follicles of different maturation stages. A study was conducted using five protocols combining different enzymes and varying concentrations. Isolated follicles were classified according to their maturation stages, counted and characterized for vitality, morphology, early apoptosis and organization of transzonal projections. No statistical differences were found between the protocols when outcome parameters were analysed on a pool of follicles regardless of their maturation status. Differences were observed in quality when the follicles were analysed separately according to their maturation status. Combining morphologic characteristics and vitality, both Liberase DH and Liberase TM combined with collagenase IV were better at isolating high-quality primordial follicles, compared with collagenase IV. No statistical difference between the isolation protocols was found for primary follicles. If only high-quality isolated secondary follicles are needed, collagenase IV is found to be most advantageous. Follicles of different maturation stages react differently when enzymatic isolation protocols are compared.

Immune evasion by pathogenic Leptospira strains: the secretion of proteases that directly cleave complement proteins.

Leptospirosis is an infectious disease of public health importance. To successfully colonize the host, pathogens have evolved multiple strategies to escape the complement system. Here we demonstrate that the culture supernatant of pathogenic but not saprophytic Leptospira inhibit the three complement pathways. We showed that the proteolytic activity in the supernatants of pathogenic strains targets the central complement molecule C3 and specific proteins from each pathway, such as factor B, C2, and C4b. The proteases cleaved α and ß chains of C3 and work in synergy with host regulators to inactivate C3b. Proteolytic activity was inhibited by 1,10-phenanthroline, suggesting the participation of metalloproteases. A recombinant leptospiral metalloprotease from the thermolysin family cleaved C3 in serum and could be one of the proteases responsible for the supernatant activity. We conclude that pathogenic leptospiral proteases can deactivate immune effector molecules and represent potential targets to the development of new therapies in leptospirosis.

Automated identification of elemental ions in macromolecular crystal structures.

Many macromolecular model-building and refinement programs can automatically place solvent atoms in electron density at moderate-to-high resolution. This process frequently builds water molecules in place of elemental ions, the identification of which must be performed manually. The solvent-picking algorithms in phenix.refine have been extended to build common ions based on an analysis of the chemical environment as well as physical properties such as occupancy, B factor and anomalous scattering. The method is most effective for heavier elements such as calcium and zinc, for which a majority of sites can be placed with few false positives in a diverse test set of structures. At atomic resolution, it is observed that it can also be possible to identify tightly bound sodium and magnesium ions. A number of challenges that contribute to the difficulty of completely automating the process of structure completion are discussed.