C-Term Reduction in 3 µm Open-Tubular High-Aspect-Ratio Channels in AC-EOF Vortex Chromatography Operation.

The performance of liquid chromatography operation in open-tubular channels, the ideal chromatographic column format, is limited by slow mass transport between the mobile and stationary phase. We recently introduced a lateral mixing methodology ("vortex chromatography") to reduce Taylor-Aris dispersion by employing (small) AC-EOF (alternating current electroosmotic flow) fields oriented perpendicular to the conventionally applied, axially oriented pressure gradient, resulting in the reduction of the C-term by a factor of 3, studied in 40 × 20 µm2 (aspect ratio (AR) = 2) channels under unretained conditions. In the present contribution, a further increased performance gain for channel dimensions relevant for chromatographic applications is demonstrated. The impact of the applied voltage and salt concentration is studied for 3 × 20 and 5 × 20 µm2 channels in ARs of up to 6.7, revealing a C-term reduction potential of a factor of up to 5 for large molecules (dextran) under unretained conditions. The decrease in κaris in a 5 µm channel (reduction of 80%) was larger than the decrease in a 3 µm channel (reduction of 44%).

Supervised machine learning in microfluidic impedance flow cytometry for improved particle size determination.

The assessment of particle and cell size in electrical microfluidic flow cytometers has become common practice. Nevertheless, in flow cytometers with coplanar electrodes accurate determination of particle size is difficult, owing to the inhomogeneous electric field. Pre-defined signal templates and compensation methods have been introduced to correct for this positional dependence, but are cumbersome when dealing with irregular signal shapes. We introduce a simple and accurate post-processing method without the use of pre-defined signal templates and compensation functions using supervised machine learning. We implemented a multiple linear regression model and show an average reduction of the particle diameter variation by 37% with respect to an earlier processing method based on a feature extraction algorithm and compensation function. Furthermore, we demonstrate its application in flow cytometry by determining the size distribution of a population of small (4.6 ± 0.9 µm) and large (5.9 ± 0.8 µm) yeast cells. The improved performance of this coplanar, two electrode chip enables precise cell size determination in easy to fabricate impedance flow cytometers.

Planar Junctionless Field-Effect Transistor for Detecting Biomolecular Interactions.

Label-free field-effect transistor-based immunosensors are promising candidates for proteomics and peptidomics-based diagnostics and therapeutics due to their high multiplexing capability, fast response time, and ability to increase the sensor sensitivity due to the short length of peptides. In this work, planar junctionless field-effect transistor sensors (FETs) were fabricated and characterized for pH sensing. The device with SiO2 gate oxide has shown voltage sensitivity of 41.8 ± 1.4, 39.9 ± 1.4, 39.0 ± 1.1, and 37.6 ± 1.0 mV/pH for constant drain currents of 5, 10, 20, and 50 nA, respectively, with a drain to source voltage of 0.05 V. The drift analysis shows a stability over time of -18 nA/h (pH 7.75), -3.5 nA/h (pH 6.84), -0.5 nA/h (pH 4.91), 0.5 nA/h (pH 3.43), corresponding to a pH drift of -0.45, -0.09, -0.01, and 0.01 per h. Theoretical modeling and simulation resulted in a mean value of the surface states of 3.8 × 1015/cm2 with a standard deviation of 3.6 × 1015/cm2. We have experimentally verified the number of surface sites due to APTES, peptide, and protein immobilization, which is in line with the theoretical calculations for FETs to be used for detecting peptide-protein interactions for future applications.

Microfluidic Electrochemistry Meets Trapped Ion Mobility Spectrometry and High-Resolution Mass Spectrometry-In Situ Generation, Separation, and Detection of Isomeric Conjugates of Paracetamol and Ethoxyquin.

Over the last 3 decades, electrochemistry (EC) has been successfully applied in phase I and phase II metabolism simulation studies. The electrochemically generated phase I metabolite-like oxidation products can react with selected reagents to form phase II conjugates. During conjugate formation, the generation of isomeric compounds is possible. Such isomeric conjugates are often separated by high-performance liquid chromatography (HPLC). Here, we demonstrate a powerful approach that combines EC with ion mobility spectrometry to separate possible isomeric conjugates. In detail, we present the hyphenation of a microfluidic electrochemical chip with an integrated mixer coupled online to trapped ion mobility spectrometry (TIMS) and time-of-flight high-resolution mass spectrometry (ToF-HRMS), briefly chipEC-TIMS-ToF-HRMS. This novel method achieves results in several minutes, which is much faster than traditional separation approaches like HPLC, and was applied to the drug paracetamol and the controversial feed preservative ethoxyquin. The analytes were oxidized in situ in the electrochemical microfluidic chip under formation of reactive intermediates and mixed with different thiol-containing reagents to form conjugates. These were analyzed by TIMS-ToF-HRMS to identify possible isomers. It was observed that the oxidation products of both paracetamol and ethoxyquin form two isomeric conjugates, which are characterized by different ion mobilities, with each reagent. Therefore, using this hyphenated technique, it is possible to not only form reactive oxidation products and their conjugates in situ but also separate and detect these isomeric conjugates within only a few minutes.

Monitoring Contractile Cardiomyocytes via Impedance Using Multipurpose Thin Film Ruthenium Oxide Electrodes.

A ruthenium oxide (RuOx) electrode was used to monitor contractile events of human pluripotent stem cells-derived cardiomyocytes (hPSC-CMs) through electrical impedance spectroscopy (EIS). Using RuOx electrodes presents an advantage over standard thin film Pt electrodes because the RuOx electrodes can also be used as electrochemical sensor for pH, O2, and nitric oxide, providing multisensory functionality with the same electrode. First, the EIS signal was validated in an optically transparent well-plate setup using Pt wire electrodes. This way, visual data could be recorded simultaneously. Frequency analyses of both EIS and the visual data revealed almost identical frequency components. This suggests both the EIS and visual data captured the similar events of the beating of (an area of) hPSC-CMs. Similar EIS measurement was then performed using the RuOx electrode, which yielded comparable signal and periodicity. This mode of operation adds to the versatility of the RuOx electrode's use in in vitro studies.

Spectroelectrochemistry, the future of visualizing electrode processes by hyphenating electrochemistry with spectroscopic techniques.

The combination of electrochemistry and spectroscopy, known as spectroelectrochemistry (SEC), is an already established approach. By combining these two techniques, the relevance of the data obtained is greater than what it would be when using them independently. A number of review papers have been published on this subject, mostly written for experts in the field and focused on recent advances. In this review, written for both the novice in the field and the more experienced reader, the focus is not on the past but on the future. The scope is narrowed down to four techniques the authors claim to have the most potential for the future, namely: infrared spectroelectrochemistry (IR-SEC), Raman spectroelectrochemistry (Raman-SEC), nuclear magnetic resonance spectroelectrochemistry (NMR-SEC) and, perhaps slightly more controversial but certainly promising, electrochemistry mass-spectrometry (EC-MS).

High Aspect Ratio Fin-Ion Sensitive Field Effect Transistor: Compromises toward Better Electrochemical Biosensing.

The development of next generation medicines demands more sensitive and reliable label-free sensing able to cope with increasing needs of multiplexing and shorter times to results. Field effect transistor-based biosensors emerge as one of the main possible technologies to cover the existing gap. The general trend for the sensors has been miniaturization with the expectation of improving sensitivity and response time but presenting issues with reproducibility and noise level. Here we propose a Fin-Field Effect Transistor (FinFET) with a high height to width aspect ratio for electrochemical biosensing solving the issue of nanosensors in terms of reproducibility and noise, while keeping the fast response time. We fabricated different devices and characterized their performance with their response to the pH changes that fitted to a Nernst-Poisson model. The experimental data were compared with simulations of devices with different aspect ratio, establishing an advantage in linearity and lower device resistance to provide higher current signals for the FinFETs with higher aspect ratio. In addition, these FinFETs promise the optimization of reliability and efficiency in terms of limits of detection for which the interplay of the size and geometry of the sensor with the diffusion of the analytes plays a pivotal role.

Ion Concentration Polarization for Microparticle Mesoporosity Differentiation.

Microparticle porosity is normally determined in bulk manner providing an ensemble average that hinders establishing the individual role of each microparticle. On the other hand, single particle characterization implies expensive technology. We propose to use ion concentration polarization to measure differences in mesoporosity at the single particle level. Ion concentration polarization occurs at the interface between an electrolyte and a porous particle when an electric field is applied. The extent of ion concentration polarization depends, among others, on the mesopore size and density. By using a fluorescence marker, we could measure differences in concentration polarization between particles with 3 and 13 nm average mesopore diameters. A qualitative model was developed in order to understand and interpret the phenomena. We believe that this inexpensive method could be used to measure differences in mesoporous particle materials such as catalysts.

Electrochemical Control of pH in Nanoliter Volumes.

The electrochemical management of the proton concentration in miniaturized dimensions opens the way to control and parallelize multistep chemical reactions, but still it faces many challenges linked to the efficient proton generation and control of their diffusion. Here we present a device operated electrochemically that demonstrates the control of the pH in a cell of ∼140 nL. The device comprises a microfluidic reactor integrated with a pneumatic mechanism that allows the exchange of reagents and the isolation of protons to decrease the effect of their diffusion. We monitored the pH with a fluorescence marker and calculated the final value from the redox currents. We demonstrate a large pH amplitude control from neutral pH values beyond the fluorescence marker range at pH 5. On the basis of the calculations from the Faradaic currents, the minimum pH reached should undergo pH ∼ 0.9. The pH contrast between neutral and acid pH cells can be maintained during periods longer than 15 min with an appropriate design of a diffusion barrier.

Ruthenium Oxide Nanorods as Potentiometric pH Sensor for Organs-On-Chip Purposes.

A ruthenium oxide (RuOx) sensor for potentiometric pH sensing is currently being developed for organs-on-chip purposes. The sensor was fabricated from a Ru(OH)3 precursor, resulting in RuOx nanorods after heating. An open-circuit potential of the RuOx electrode showed a near-Nernstian response of -58.05 mV/pH, with good selectivity against potentially interfering ions (lithium, sulfate, chloride, and calcium ions). The preconditioned electrode (stored in liquid) had a long-term drift of -0.8 mV/h, and its response rate was less than 2 s. Sensitivity to oxygen was observed at an order of magnitude lower than other reported metal-oxide pH sensors. Together with miniaturizability, the RuOx pH sensor proves to be a suitable pH sensor for organs-on-chip studies.

Magnetophoretic Sorting of Single Catalyst Particles.

A better understanding of the deactivation processes taking place within solid catalysts is vital to design better ones. However, since inter-particle heterogeneities are more a rule than an exception, particle sorting is crucial to analyse single catalyst particles in detail. Microfluidics offers new possibilities to sort catalysts at the single particle level. Herein, we report a first-of-its-kind 3D printed magnetophoretic chip able to sort catalyst particles by their magnetic moment. Fluid catalytic cracking (FCC) particles were separated based on their Fe content. Magnetophoretic sorting shows that large Fe aggregates exist within 20 % of the FCC particles with the highest Fe content. The availability of Brønsted acid sites decreases with increasing Fe content. This work paves the way towards a high-throughput catalyst diagnostics platform to determine why specific catalyst particles perform better than others.

Electrochemical Protein Cleavage in a Microfluidic Cell with Integrated Boron Doped Diamond Electrodes.

Specific electrochemical cleavage of peptide bonds at the C-terminal side of tyrosine and tryptophan generates peptides amenable to liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis for protein identification. To this end we developed a microfluidic electrochemical cell of 160 nL volume that combines a cell geometry optimized for a high electrochemical conversion efficiency (>95%) with an integrated boron doped diamond (BDD) working electrode offering a wide potential window in aqueous solution and reduced adsorption of peptides and proteins. Efficient cleavage of the proteins bovine insulin and chicken egg white lysozyme was observed at 4 out of 4 and 7 out of 9 of the predicted cleavage sites, respectively. Chicken egg white lysozyme was identified based on 5 electrochemically generated peptides using a proteomics database searching algorithm. These results show that electrochemical peptide bond cleavage in a microfluidic cell is a novel, fully instrumental approach toward protein analysis and eventually proteomics studies in conjunction with mass spectrometry.

Mass spectrometric detection of short-lived drug metabolites generated in an electrochemical microfluidic chip.

The costs of drug development have been rising exponentially over the last six decades, making it essential to select drug candidates in the early drug discovery phases before proceeding to expensive clinical trials. Here, we present novel screening methods using an electrochemical chip coupled online to mass spectrometry (MS) or liquid chromatography (LC) and MS, to generate phase I and phase II drug metabolites and to demonstrate protein modification by reactive metabolites. The short transit time (∼4.5 s) between electrochemical oxidation and mass spectrometric detection, enabled by an integrated electrospray emitter, allows us to detect a short-lived radical metabolite of chlorpromazine which is too unstable to be detected using established test routines. In addition, a fast way to screen candidate drugs is established by recording real-time mass voltammograms, which allows one to identify the drug metabolites that are expected to be formed upon oxidation by applying a linear potential sweep and simultaneously detect oxidation products. Furthermore, detoxification of electrochemically generated reactive metabolites of paracetamol was mimicked by their adduct formation with the antioxidant glutathione. Finally, the potential toxicity of reactive metabolites can be investigated by the modification of proteins, which was demonstrated by modification of carbonic anhydrase I with electrochemically generated reactive metabolites of paracetamol. With this series of experiments, we demonstrate the potential of this electrochemical chip as a complementary tool for a variety of drug metabolism studies in the early stages of drug discovery.

Lactate biosensors: current status and outlook.

Many research efforts over the last few decades have been devoted to sensing lactate as an important analytical target in clinical care, sport medicine, and food processing. Therefore, research in designing lactate sensors is no longer in its infancy and now is more directed toward viable sensors for direct applications. In this review, we provide an overview of the most immediate and relevant developments toward this end, and we discuss and assess common transduction approaches. Further, we critically describe the pros and cons of current commercial lactate sensors and envision how future sensing design may benefit from emerging new technologies.

'Staying Hot': Investigating the influence of overnight conditions on the penile skin temperature during male sexual arousal-A novel methodology for nocturnal erection detection.

Objective: The objective of this study is to assess the impact of overnight environmental conditions on erectile penile temperature within a controlled setting, with the aim of investigating the feasibility of using temperature measurements for nocturnal erection detection in erectile dysfunction diagnostics. Subjects/patients and methods: We conducted a proof-of-concept study involving 10 healthy male participants aged 20 to 25. The study was carried out at the Department of Urology, St. Antonius Ziekenhuis, the Netherlands. Penile temperature thermistor measurements were taken during visually aroused erections of participants in naked state and in simulated overnight condition (underwear and blankets). Main outcome variables were peak and baseline temperature during erectile periods. To minimize the impact of differences in erectile strength and duration between consecutive measurements, we applied randomization to the order of the environmental conditions. Results: We observed a significant increase in penile temperature during erection in both the naked (p < 0.01) and simulated overnight condition (p < 0.01). The mean temperature increase was 1.70 and 0.67°C, respectively. While penile temperature returned to baseline immediately after naked erections, the 'Staying Hot effect' was noted in the simulated overnight condition measurements, where the temperature remained elevated at peak temperature for the entire 30-min period following the erection. Conclusions: The findings from this study indicate that the penile temperature not only significantly increases during naked sexual arousal but is also detectable under simulated overnight conditions. This underscores the potential of using temperature measurements for nocturnal erection detection, representing a crucial initial step in developing a modernized, non-invasive sensor system for ambulatory erectile dysfunction diagnostics. Further research, including an overnight study, is needed to gain insights into the feasibility of utilizing penile temperature measurements for nocturnal erection detection and to assess the impact of the 'Staying Hot effect' on subsequent erection detection.

'Feeling Hot': Exploring the feasibility of nocturnal erection detection through penile temperature measurements.

Objectives: The observational 'Feeling Hot' study aims to evaluate the feasibility of employing overnight penile temperature measurements for the detection of nocturnal erections, thereby contributing to the advancement and modernization of a non-invasive diagnostic system for erectile dysfunction. Subjects/Patients and Methods: In this proof-of-concept study, 10 healthy men aged 20-25 were recruited, following the methodology outlined in the 'Staying Hot' study by Torenvlied et al. Participants underwent ambulatory overnight penile temperature measurements concurrent with RigiScan recordings. Key outcome measures included baseline and peak penile temperatures during RigiScan-annotated nocturnal erections. Reference measurements of the thigh temperature were also taken to assess nocturnal temperature variations. Results: Statistically significant penile temperature increases (p = 0.008, n = 9) were observed during nocturnal erections, with an average elevation of 1.47°C noted during the initial erections. This underscores the practical utility of penile temperature measurements in detecting erection onset. Challenges arose in accurately determining erection duration and subsequent erection onsets due to the persistence of elevated temperatures following initial erections, termed the 'Staying Hot effect'. Reference thigh temperature measurements aided in addressing this challenge. Conclusion: Examining overnight penile temperature alongside simultaneous RigiScan recordings has yielded valuable insights into the viability of using the temperature methodology for detecting nocturnal erections. The 'Feeling Hot' study findings demonstrate significant penile temperature elevation during nocturnal erections in healthy young men, highlighting the potential of integrating this measurement methodology into the design of a modernized tool for ambulatory erectile dysfunction diagnostics. Further development of an advanced sensor system to comprehensively assess erection duration and quality is essential for enhancing clinical applicability.

Miniaturized Control of Acidity in Multiplexed Microreactors.

The control of acidity drives the assembly of biopolymers that are essential for a wide range of applications. Its miniaturization can increase the speed and the possibilities of combinatorial throughput for their manipulation, similar to the way that the miniaturization of transistors allows logical operations in microelectronics with a high throughput. Here, we present a device containing multiplexed microreactors, each one enabling independent electrochemical control of acidity in ∼2.5 nL volumes, with a large acidity range from pH 3 to 7 and an accuracy of at least 0.4 pH units. The attained pH within each microreactor (with footprints of ∼0.3 mm2 for each spot) was kept constant for long retention times (∼10 min) and over repeated cycles of >100. The acidity is driven by redox proton exchange reactions, which can be driven at different rates influencing the efficiency of the device in order to achieve more charge exchange (larger acidity range) or better reversibility. The achieved performance in acidity control, miniaturization, and the possibility to multiplex paves the way for the control of combinatorial chemistry through pH- and acidity-controlled reactions.

Microfluidic Impedance Cytometry for Single-Cell Particulate Inorganic Carbon:Particulate Organic Carbon Measurements of Calcifying Algae.

Calcifying algae, like coccolithophores, greatly contribute to the oceanic carbon cycle and are therefore of particular interest for ocean carbon models. They play a key role in two processes that are important for the effective CO2 flux: The organic carbon pump (photosynthesis) and the inorganic carbon pump (calcification). The relative contribution of calcification and photosynthesis can be measured in algae by the amount of particulate inorganic carbon (PIC) and particulate organic carbon (POC). A microfluidic impedance cytometer is presented, enabling non-invasive and high-throughput assessment of the calcification state of single coccolithophore cells. Gradual modification of the exoskeleton by acidification results in a strong linear fit (R 2 = 0.98) between the average electrical phase and the PIC:POC ratio of the coccolithophore Emiliania huxleyi 920/9. The effect of different CO2 treatments on the PIC:POC ratio, however, is inconclusive, indicating that there is no strong effect observed for this particular strain. Lower PIC:POC ratios in cultures that grew to higher cell densities are found, which are also recorded with the impedance-based PIC:POC sensor. The development of this new quantification tool for small volumes paves the way for high-throughput analysis while applying multi-variable environmental stressors to support projections of the future marine carbon cycle.

Improved conversion rates in drug screening applications using miniaturized electrochemical cells with frit channels.

This paper reports a novel design of a miniaturized three-electrode electrochemical cell, the purpose of which is aimed at generating drug metabolites with a high conversion efficiency. The working electrode and the counter electrode are placed in two separate channels to isolate the reaction products generated at both electrodes. The novel design includes connecting channels between these two electrode channels to provide a uniform distribution of the current density over the entire working electrode. In addition, the effect of ohmic drop is decreased. Moreover, two flow resistors are included to ensure an equal flow of analyte through both electrode channels. Total conversion of fast reacting ions is achieved at flow rates up to at least 8 µL/min, while the internal chip volume is only 175 nL. Using this electrochemical chip, the metabolism of mitoxantrone is studied by microchip electrospray ionization-mass spectrometry. At an oxidation potential of 700 mV, all known metabolites from direct oxidation are observed. The electrochemical chip performs equally well, compared to a commercially available cell, but at a 30-fold lower flow of reagents.