ABSTRACT
Pectins are dietary fibers that are attributed with several beneficial immunomodulatory effects. Depending on the degree of esterification (DE), pectins can be classified as high methoxyl pectin (HMP) or low methoxyl pectin (LMP). The aim of this study was to investigate the effects of pectin methyl-esterification on intestinal microbiota and its immunomodulatory properties in naive mice. Supplementation of the diet with LMP or HMP induced changes in the composition of the intestinal microbiota in mice toward Bacteroides, which was mainly promoted by HMP. Metabolome analysis of stool samples from pectin-fed mice showed a different effect of the two types of pectin on the levels of short-chain fatty acids and bile acids, which was consistent with highly efficient in vivo fermentation of LMP. Analysis of serum antibody levels showed a significant increase in IgG and IgA levels by both pectins, while FACS analysis revealed a decrease of infiltrating inflammatory cells in the intestinal lamina propria by HMP. Our study revealed that the structural properties of the investigated pectins determine fermentability, effects on microbial composition, metabolite production, and modulation of immune responses. Consumption of HMP preferentially altered the gut microbiota and suppressed pro-inflammatory immune responses, suggesting a beneficial role in inflammatory diseases.
Subject(s)
Gastrointestinal Microbiome , Pectins , Mice , Animals , Pectins/chemistry , Esterification , Dietary Fiber/pharmacology , Dietary Fiber/metabolism , FermentationABSTRACT
Rheological analysis of citrus pectin at pH 3 and 7 elucidates its structural dynamics, revealing distinct behaviors influenced by pH. At pH 3, pectin exhibits shear-thinning, with solvent-independent unified rheological profiles identifying three concentration regimes: 0.5%-1.5%, 2%-3%, and 3.5%-4%. These regimes, alongside Cox-Merz superpositions, outline the semi-dilute (c*) and concentrated (c**) transitions at 1.5%-2% and 3%-3.5%, respectively. Moreover, a Morris equation exponent of 0.65 indicates flexible, mobility-restricted macromolecules. Conversely, at pH 7, increased viscosities and Morris plot linearity for p = .1 suggest rigid chain behavior due to electrostatic repulsion among ionized acidic groups. This rigidity leads to concentration-dependent self-assembly structures that diverge from expected unified rheological profiles, a deviation amplified by heating-cooling cycles. This study clarifies the impact of pH on citrus pectin's rheology and emphasizes the intricate relationship between polymeric chain rigidity, self-assembly, and viscosity. By providing a refined understanding of these mechanisms, our findings contribute to the broader field of polysaccharide research, offering insights critical for developing and optimizing pectin-based applications in various industries.
Subject(s)
Citrus , Pectins , Cold Temperature , RheologyABSTRACT
Porous morphology and mechanical properties determine the applications of cryogels. To understand the influence of the ionic network on the microstructure and mechanical properties of pectin cryogels, we prepared low-methoxyl pectin (LMP) cryogels with different Ca2+ concentrations (measured as R-value, ranging from 0 to 2) through freeze-drying (FD). Results showed that the R-values appeared to be crucial parameters that impact the pore morphology and mechanical characteristics of cryogels. It is achieved by altering the network stability and water state properties of the cryogel precursor. Cryogel precursors with a saturated R-value (R = 1) produced a low pore diameter (0.12 mm) microstructure, obtaining the highest crispness (15.00 ± 1.85) and hardness (maximum positive force and area measuring 2.36 ± 0.31 N and 12.30 ± 1.57 N·s respectively). Hardness showed a negative correlation with Ca2+ concentration when R ≤ 1 (-0.89), and a similar correlation with the porosity of the gel network when R ≥ 1 (-0.80). Given the impacts of crosslinking on the pore structure, it is confirmed that the pore diameter can be designed between 56.24 and 153.58 µm by controlling R-value in the range of 0-2.
Subject(s)
Cryogels , Pectins , Cryogels/chemistry , Mechanical Phenomena , Porosity , HardnessABSTRACT
There is an increasing demand for obtaining pectin from new sources. Red radish (Raphanus sativus L.) pomace pectin extracted by alkali was low-methoxyl pectin with esterification degree of 10.17 %, galacturonic acid content of 69.71 % (wt), and average molar weight of 78.59 kDa. The pectin primarily consisted of rhamnogalacturonan I and homogalacturonan domains. The predominant monosaccharides of the pectin were galacturonic acid (46.32 mol%), arabinose (16.03 mol%), galactose (10.46 mol%), and rhamnose (10.28 mol%), respectively. The red radish pomace pectin solution exhibited a shear-thinning behavior. NaCl could induce gelation of red radish pomace pectin, and the gel properties of red radish pomace pectin were considerably affected by the NaCl concentration. As the NaCl concentration (0.25-0.50 mol/L) increased, the rate of gelation accelerated, and the time to gelation point appeared earlier. There was an optimal NaCl concentration (0.50 mol/L) for the pectin to form a gel with the greatest solid-like properties, gel hardness (33.84 g) and water-holding capacity (62.41 %). Gelation force analysis indicated gel formation mainly caused by electrostatic shielding effect of Na+ and hydrogen bonding. This research could facilitate the applications of the red radish pomace pectin in the realm of edible hydrocolloids.
Subject(s)
Raphanus , Sodium Chloride , Pectins/analysis , Hexuronic Acids/analysisABSTRACT
Inflammatory bowel disease (IBD) is a public health challenge and the use of pectin for symptom amelioration is a promising option. In this work, sunflower pectin has been extracted without (CHP) and with assistance of ultrasound (USP) using sodium citrate as a food-grade extracting agent. At optimal conditions (64 °C, 23 min) the highest yield was obtained with ultrasound application (15.5 vs. 8.1 %). Both pectins were structurally characterized by 1H NMR, HPSEC-ELSD, FT-IR and GC-FID. Unlike CHP, USP showed a lower molecular weight, higher galacturonic acid, lower degree of methyl-esterification and, overall, higher viscosity. These characteristics could affect the anti-inflammatory activity of pectins, evaluated using DSS-induced IBD model mice. So, USP promoted the defence (ICAM-1) and repair of the gastrointestinal mucosa (TFF3, ZO-1) more effectively than CHP. These results demonstrate the potential amelioration of acute colitis in IBD mice through USP supplementation. Taking into account the biomarkers analysed, these results demonstrate, for the first time, the positive impact of sunflower pectin extracted by ultrasound under very soft conditions on inflammatory bowel disease that might open up new possibilities in the treatment of this serious pathology.
Subject(s)
Helianthus , Inflammatory Bowel Diseases , Animals , Mice , Pectins/pharmacology , Pectins/chemistry , Helianthus/chemistry , Spectroscopy, Fourier Transform Infrared , Sodium Citrate , Inflammatory Bowel Diseases/diagnostic imaging , Inflammatory Bowel Diseases/drug therapyABSTRACT
Pectin hydrogel is a soft hydrocolloid with multifaceted utilities in the food sector. Substantial knowledge acquired on the gelation mechanisms and structure-function relationship of pectin has led to interesting functions of pectin hydrogel. Food applications of pectin hydrogels can be categorized under four headings: food ingredients/additives, food packaging, bioactive delivery and health management. The cross-linked and tangly three-dimensional structure of pectin gel renders it an ideal choice of wall material for the encapsulation of biomolecules and living cells; as a fat replacer and texturizer. Likewise, pectin hydrogel is an effective satiety inducer due to its ability to swell under the simulated gastric and intestinal conditions without losing its gel structure. Coating or composites of pectin hydrogel with proteins and other polysaccharides augment its functionality as an encapsulant, satiety-inducer and food packaging material. Low-methoxyl pectin gel is an appropriate food ink for 3D printing applications due to its viscoelastic properties, adaptable microstructure and texture properties. This review aims at explaining all the applications of pectin hydrogels, as mentioned above. A comprehensive discussion is presented on the approaches by which pectin hydrogel can be transformed as a resourceful material by controlling its dimensions, state, and rheology. The final sections of this article emphasize the recent research trends in this discipline, such as the development of smart hydrogels, injectable gels, aerogels, xerogels and oleogels from pectin.
Subject(s)
Hydrogels , Pectins , Hydrogels/chemistry , Pectins/chemistry , Polysaccharides , Printing, Three-Dimensional , RheologyABSTRACT
The industrial processing of avocados annually generates more than 1.2 million tons of avocado peels (APs) and avocado seeds (ASs) that have great potential in the production of active bioplastics, although they have never been considered for this aim until now. Separately, the APs and ASs, as well as a combination of avocado peels and seeds (APSs), were evaluated here for the first time for the preparation of antioxidant films, with application in food packaging. Films were prepared by casting, after their processing by three different methods: (1) hydrolysis in acid media, (2) hydrolysis followed by plasticization, and (3) hydrolysis and plasticization followed by blending with pectin polymers in different proportions (25 and 50 wt %). The results indicate that the combination of hydrolysis, plasticization, and pectin blending is essential to obtain materials with competitive mechanical properties, optical clarity, excellent oxygen barrier properties, high antioxidant activity, biodegradability, and migration of components in TENAX suitable for food contact applications. In addition, the materials prepared with APSs are advantageous from the point of view of the industrial waste valorization, since the entire avocado wastes are used for the production of bioplastics, avoiding further separation processes for their valorization.
Subject(s)
Food Packaging/methods , Persea , Seeds/metabolism , Antioxidants/chemistry , Pectins/chemistry , Persea/chemistry , Persea/metabolismABSTRACT
Encapsulation is a common approach to improve the bacterial survival of probiotics. In this study, two new low-methoxyl pectins (CMP-6 and CMP-8) were used as coating materials to produce microcapsules (MCs) for the encapsulation of Lactobacillus acidophilus LMG9433T, Lactobacillus casei LMG6904T, and Lactobacillus rhamnosus LMG25859. A fermentation test showed that encapsulation did not influence the fermentation ability of lactobacilli. The biofilm formation of encapsulated lactobacilli was stimulated when an in situ cultivation was conducted on MCs, which was verified by cryo-SEM observation. The resultant biofilm-forming MCs (BMCs) contained high-density bacterial cells (â¼1010 CFU/mL). Compared to planktonic lactobacilli, pectin-based MCs showed significant protection for encapsulated lactobacilli from heat shock and simulated gastric digestion. Especially, benefiting from the biofilm formation, BMCs provided higher protection with enhanced resistance to heat shock, freeze-drying, and gastrointestinal digestion than MCs. Our result highlighted the superior bacterial resistances of biofilm-forming probiotics encapsulated in pectinate microcapsules.
Subject(s)
Pectins , Probiotics , Biofilms , Capsules , Digestion , Heat-Shock ResponseABSTRACT
Resveratrol-loaded fish gelatin (FG)-low methoxyl pectin (LMP) composite films with different FG:LMP mass ratios were prepared and evaluated as food packaging materials. With increasing FG contents, the water solubility of the films decreased. Moreover, the UV (315-400 nm) blocking efficiency and opacity increased with increasing LMP contents. The elongation of the films at breaking and tensile strengths were adjusted using the ratio of FG and LMP. The lowest water vapour permeability was observed at an FG:LMP mass ratio of 2:1. All films exhibited good antioxidant properties and significantly delayed oil deterioration when used for beef tallow preservation. The release behaviour of resveratrol in 95% ethanol as a food simulant was determined by film composition. The fabricated films exhibit significant potential for beef tallow preservation applications. Furthermore, LMP can improve the stability of resveratrol-FG complexes and compete with resveratrol for binding FG to accelerate resveratrol release.
Subject(s)
Food Packaging , Gelatin/chemistry , Pectins/chemistry , Resveratrol/chemistry , Animals , Antioxidants/chemistry , Fish Products , Food Preservation/instrumentation , Food Storage , Hydrogen-Ion Concentration , Permeability , Red Meat , Resveratrol/pharmacokinetics , Solubility , Steam , Tensile StrengthABSTRACT
The intake of diets rich in carbohydrates with a high-glycaemic load provides excessive energy consumption and low nutritional quality, contributing to cardiovascular diseases, type II diabetes and obesity, among other pathologies. Natural options such as the use of low-methoxyl pectin to develop sugar free formulations is growing since they form gel without sucrose, providing stability and viscosity of numerous foodstuffs. In this paper, we have reviewed the consumer habits of sugar intake and the potential of pectin in the elaboration of low-glycaemic index foods, as well as the structure, applications and sources of pectin. Special attention has been paid on the structure-function relationship of low-methoxyl pectins considering their effects on type I and II diabetes. It has been shown that these pectins reduce the post-prandial glycaemic responses and have an important and recognised potential for the treatment and prevention of diabetes. Rheological behaviour of pectin, impact on intestinal microbiota and on different biomarkers have been postulated as the potential involved mechanisms. As future trends, it is necessary to consider new sources and structures of pectin that present improved functionalities. For this purpose, the obtainment of pectin and derivatives should be placed in a framework of sustainable food systems.
Subject(s)
Diabetes Mellitus, Type 2 , Pectins , Diet , Humans , Rheology , ViscosityABSTRACT
Cellulose nanocrystal (CNC) has tremendous potential in chemical, material, and food fields as an attractive green bioresource. We formulated viscoelastic hydrogels composed of anisotropic CNC using an extrusion-based 3D printing technology. We explored the rheological properties and printability of CNC hydrogels with different concentrations (0.5-25 wt%), and quantified the shear-induced self-assembly behavior of CNC during printing. The results showed that 20 wt% CNC hydrogels exhibited optimal print resolution and fidelity, with a high degree of orientation (72 %-73 %) of CNC alignment along the printing direction. It provides quantitative guidelines for the development of 3D printable materials with particle orientation. Furthermore, we prepared two composite hydrogels for 3D printing by blending CNC with high/low methoxy pectin (HMP/LMP). The results revealed that two hydrogels had favorable print fidelity at suitable ratios (CNC: HMP = 2:8, CNC: LMP = 10:5). This provided flexible and sustainable choices for the development of medical tissue engineering.
Subject(s)
Cellulose/chemistry , Hydrogels/chemistry , Nanocomposites/chemistry , Nanoparticles/chemistry , Printing, Three-Dimensional , Rheology/methods , Anisotropy , Biocompatible Materials/chemistry , Elasticity , Pectins/chemistry , Tissue Engineering/methods , ViscosityABSTRACT
BACKGROUND: Edible films were obtained from aqueous emulsions prepared with low-methoxyl pectin at different concentrations (10, 20 and 30 g kg-1 ) and two sunflower wax samples recovered from two waste samples of filter cakes produced in the winterization process of sunflower oil. The two sunflower waxes samples recovered (from the normal hybrid, NSFW, and from the high-oleic hybrid, HOSFW) were added in three proportions (0.1, 0.2 and 0.3 g g-1 of pectin). Films were evaluated according to their structure, water resistance, water vapor permeability, mechanical properties and thermal behavior. RESULTS: In general, good dispersion of the lipid material was observed in the cross-sections of the film. Increase in the water resistance (lower swelling index and water adsorption) was associated with a greater pectin content crosslinked with Ca2+ and the hydrophobic nature of waxes. The reduction in water vapor transfer rates was influenced by the effect of the wax addition, their fatty acid composition and their good distribution on the film. More resistant, rigid and less flexible films were obtained with lower pectin content, finding an inverse relationship between tensile strength and elongation percentage values. CONCLUSION: These results evidence a promising alternative in the development of innovative strategies to valorize sunflower waxes derived from waste material. © 2020 Society of Chemical Industry.
Subject(s)
Edible Films , Pectins/chemistry , Waxes/chemistry , Fatty Acids/analysis , Helianthus/chemistry , Permeability , Waste Products , Water/chemistryABSTRACT
SCOPE: This study aims to examine the protective effects of specific low-methoxyl pectin (LMP) on the development of type 1 diabetes (T1D). METHODS AND RESULTS: Female non-obese diabetic (NOD) mice are weaned onto either control or 5% LMP supplemented diets for up to 22 weeks of age. T1D incidence, gut barrier function, and pancreatic-gut immune responses are analyzed. LMP supplementation significantly dampened the onset of T1D in NOD mice. LMP supplementation induces caecal homeostasis, as indicated by the increasing SCFAs production, higher expression of tight junction proteins claudin 1, zonula occludens-2 in caecum. Furthermore, LMP-mediated caecal homeostasis impacts gut-pancreatic immunity, as evidenced by increased regulatory T cell population, modulated inflammatory cytokine expression, and suppressed NOD like receptor protein 3 (NLRP3) inflammasome activation in both caecum and pancreas. CONCLUSION: The data demonstrate that LMP limits T1D development by inducing caecal homeostasis to shape pancreatic immune environment, providing a scientific basis for using LMP as a novel functional supplementation to intervene T1D.
Subject(s)
Cecum/drug effects , Diabetes Mellitus, Type 1/prevention & control , Hypoglycemic Agents/pharmacology , Pectins/pharmacology , Animals , Cecum/immunology , Diabetes Mellitus, Type 1/immunology , Dietary Supplements , Fatty Acids, Volatile/metabolism , Female , Hypoglycemic Agents/chemistry , Immunologic Factors/pharmacology , Intestines/drug effects , Intestines/pathology , Mice, Inbred NOD , NLR Family, Pyrin Domain-Containing 3 Protein/metabolism , Pancreas/drug effects , Pancreas/immunology , Pancreas/pathology , Pectins/chemistry , T-Lymphocytes, Regulatory/drug effectsABSTRACT
Intestinal homeostasis underpins the development of type 1 diabetes (T1D), and dietary manipulations to enhance intestinal homeostasis have been proposed to prevent T1D. The current study aimed to investigate the efficacy of supplementing a novel specific low-methoxyl pectin (LMP) dietary fiber in preventing T1D development. Female NOD mice were weaned onto control or 5% (wt/wt) LMP supplemented diets for up to 40 weeks of age, overt diabetes incidence and blood glucose were monitored. Then broad-spectrum antibiotics (ABX) treatment per os for 7 days followed by gut microbiota transfer was performed to demonstrate gut microbiota-dependent effects. Next-generation sequencing was used for analyzing the composition of microbiota in caecum. Concentration of short chain fatty acids were determined by GC-MS. The barrier reinforcing tight junction proteins zonula occludens-2 (ZO-2), claudin-1 and NOD like receptor protein 3 (NLRP3) inflammasome activation were determined by Western blot. The proportion of CD25+Foxp3+CD4+ regulatory T cell (Foxp3+ Treg) in the pancreas, pancreatic and mesenteric lymph nodes was analyzed by flow cytometry. We found that LMP supplementation ameliorated T1D development in non-obese diabetic (NOD) mice, as evidenced by decreasing diabetes incidence and fasting glucose levels in LMP fed NOD mice. Further microbiota analysis revealed that LMP supplementation prevented T1D-associated caecal dysbiosis and selectively enriched caecal bacterial species to produce more SCFAs. The LMP-mediated microbial balance further enhanced caecal barrier function and shaped gut-pancreatic immune environment, as characterized by higher expression of tight junction proteins claudin-1, ZO-2 in caecum, increased Foxp3+ Treg population and decreased NLRP3 inflammasome activation in both caecum and pancreas. The microbiota-dependent beneficial effect of LMP on T1D was further proven by the fact that aberration of caecal microbiota by ABX treatment worsened T1D autoimmunity and could be restored with transfer of feces of LMP-fed NOD mice. These data demonstrate that this novel LMP limits T1D development by inducing caecal homeostasis to shape pancreatic immune environment. This finding opens a realistic option for gut microbiota manipulation and prevention of T1D in humans.
Subject(s)
Diabetes Mellitus, Experimental , Diabetes Mellitus, Type 1 , Gastrointestinal Microbiome , Pectins/pharmacology , Animals , Cecum/immunology , Cecum/microbiology , Cecum/pathology , Diabetes Mellitus, Experimental/immunology , Diabetes Mellitus, Experimental/microbiology , Diabetes Mellitus, Experimental/pathology , Diabetes Mellitus, Type 1/immunology , Diabetes Mellitus, Type 1/microbiology , Diabetes Mellitus, Type 1/pathology , Female , Gastrointestinal Microbiome/drug effects , Gastrointestinal Microbiome/immunology , Humans , Mice , Mice, Inbred NOD , Pancreas/immunology , Pancreas/pathology , T-Lymphocytes, Regulatory/immunology , T-Lymphocytes, Regulatory/pathologyABSTRACT
In this study, the physicochemical properties of an ammonium oxalate extraction pectin (AOP) from Premna microphylla turcz was investigated. Moreover, its cold gelation with undenatured whey protein concentrate (WPC) was studied at room temperature and different pHs. Characterizations of AOP demonstrated that AOP was a linear low-methoxyl pectin rich in homogalacturonan with low branching degree of RG-I, leading to its good gelling properties. Gelation between AOP and WPC was mainly investigated by turbidity measurement, FTIR, CLSM and ITC. The results showed that an optimal complex ratio for gelation was observed at 1:5 at pHâ¯6.0. Moreover, AOP was the backbone of the composite gel and WPC might act as crosslinking agents through electrostatic or hydrophobic interaction at different pHs. When pH was around the pHΦ of the complex, composite gel was mainly constructed by electrostatic interaction. With the increase of pH, the electrostatic interaction between AOP and WPC gradually weakened, while the hydrophobic interaction constantly increased. When pH was higher than the pHc of the complex, composite gel was mainly formed by hydrophobic interaction. The results of this study are conducive to further utilization of Premna microphylla turcz pectin to develop related food products.
Subject(s)
Cold Temperature , Lamiaceae/chemistry , Pectins/chemistry , Whey Proteins/chemistry , Chemical Phenomena , Gels , Hydrogen-Ion ConcentrationABSTRACT
Yogurt is a popular product worldwide partly because of the health-promoting effects of the probiotics that it contains. Probiotics with high survivability constitute a promising direction for fortified yogurt products. This study aimed to prepare Bifidobacterium breve-loaded yogurt with the bacteria surviving transit to the lower part of small intestine or colon. Bifidobacterium breve beads were prepared through an ion-crosslinking method using low methoxyl pectin as the encapsulating material. Features such as encapsulation efficiency and stability during storage and passage through the simulated gastrointestinal tract were studied in vitro. A commercial starter was used for yogurt fermentation, and B. breve with or without encapsulation was added as a probiotic supplement with the starter or 3 to 4 h after fermentation. The effects of B. breve beads on yogurt characteristics were evaluated after different fermentation processes: BC, milk fermented with marketed yogurt starter; UBFF, unencapsulated B. breve added to fresh milk and then fermented; EBFF, encapsulated B. breve added to fresh milk and then fermented; UBAF, unencapsulated B. breve added after fermentation with the starter; and EBAF, encapsulated B. breve beads added 3 to 4 h after fermentation with the starter. Evaluation was based on texture, electronic nose, and electronic tongue analyses. The particle size analysis of B. breve beads showed that they were uniform, mostly spherical, 1 to 1.5 mm in diameter with encapsulating efficiency higher than 99%. Following treatment with the simulated gastrointestinal tract conditions, the number of B. breve decreased by 1.76 and 4.82 log cfu/g for B. breve beads and unencapsulated B. breve, respectively. The EBAF group showed the lowest viscosity (2,235.67 cP) at d 0, and the lower postfermentation degree was reflected by the slow increase in yogurt viscosity. All groups kept a relatively stable pH during storage. The cohesiveness values of the EBAF and UBAF groups were significantly higher than those of the other groups. The trends in texture changes within the BC, UBFF, and EBFF groups were similar, and the UBAF and EBAF groups showed similar trends. In conclusion, B. breve beads showed good stability in vitro and improved yogurt characteristics by increasing the survival rate of the encapsulated cells. Good compatibility of low methoxyl pectin beads with yogurt was also observed.
Subject(s)
Bifidobacterium breve/metabolism , Probiotics/metabolism , Yogurt/microbiology , Animals , Colon/microbiology , Fermentation , Food Quality , Food Storage , Hydrogen-Ion Concentration , Intestine, Large/microbiology , Milk/microbiology , Pectins , ViscosityABSTRACT
The knowledge of the stability and physical properties of film-forming solutions is necessary for optimizing the process design of films. In order to evaluate their applicability for the production of edible films, the rheological and microstructural properties, particle size and physicochemical stability of aqueous emulsions of low methoxyl pectin and sunflower waxes from normal and high-oleic hybrids were assessed. Emulsions were prepared with different pectin concentrations (1, 2 and 3% w/w) and wax proportions (0.1, 0.2 and 0.3â¯g/g pectin). The rheological behavior was best described by the power law model. The values of the behavior index (n) were close to 1, exhibiting a behavior close to Newtonian fluids. The addition of waxes caused an increase in viscosity and shear stress. The particle size of the emulsions made with waxes from high-oleic sunflower was smaller than those from the normal hybrid. In most cases, size distributions with greater height and less amplitude were obtained, mainly when the pectin content was higher. Confocal images allowed to observe the presence of waxes and their dispersion in the pectin matrix. Destabilization phenomena such as sedimentation, coalescence and creaming were observed at long test times independent of the wax origin. These results evidence the potential use of these emulsions for the manufacture of edible films.
Subject(s)
Food Packaging/methods , Helianthus/chemistry , Pectins/chemistry , Water/chemistry , Waxes/chemistry , Emulsions , Kinetics , Microscopy, Confocal , Particle Size , Rheology , Viscosity , Waxes/isolation & purificationABSTRACT
Having previously highlighted the gelation of pectin with chlorhexidine (CX), pectinate microparticles were prepared here by vibrational prilling using CX, not only as an active ingredient encapsulated but also as a cross-linking agent. CX amount required for pectin gelation was smaller than usual dications (Ca2+, Zn2+) used as cross-linking agent for pectin ionotropic gelation: CX seemed to bind more easily to pectin chains that could be explained by its large molecular size. Three batches of CX microparticles with different mean size were prepared. Whatever the droplet mean diameter, similar particle characteristics in terms of encapsulation efficiency, CX encapsulation yield and drug release were observed. The encapsulation efficiency was about 5.5%, the CX encapsulation yield was approximately 44% and the maximal amount of CX released after 6â¯h was about 7%. Finally, zinc diacetate was added to the formulation as a competitive pectin cross-linking agent in order to limit CX binding to pectin and to improve CX release. The influence of CX and Zn2+ concentrations on the particles properties was studied by the means of a Doehlert design. Results showed the interest of such a mixture since the competition between both cations led to more or less structured and large microparticles, some of them having promoted the quantity of CX released.
Subject(s)
Chlorhexidine/chemistry , Cross-Linking Reagents/chemistry , Drug Carriers/chemistry , Pectins/chemistry , Drug Compounding , Drug Liberation , Gels , Zinc/chemistryABSTRACT
BACKGROUND: Red raspberries are a delicate and highly perishable fruit with a fragile pulp tissue. In this study we used vacuum impregnation (VI) methods to incorporate pectin and calcium chloride into whole red raspberries to improve their firmness. Specifically, we impregnated low methoxyl pectin (LMP) at 10 g of pectin kg-1 of solution and calcium chloride (CaCl2 ·2H2 O) at 30 g calcium kg-1 of pectin, and on the other side pectin methylesterase (PME) at 10 g of enzyme kg-1 of solution, and (CaCl2 ·2H2 O) at 10 g of calcium kg-1 of solution, into whole red raspberries. We tested three vacuum levels 33.9, 50.8, and 67.8 kPa, three vacuum impregnation times 2, 7, and 15 min, and two temperatures, 20 and 40 °C, during VI treatment. Maximum force (FM ) and gradient (GC3 ) were evaluated to assess raspberry firmness. RESULTS: A vacuum level of 50.8 kPa, processing time of 7 min, and a LMP and calcium infusion at 20 °C resulted in the firmest fruit compared to the other treatments. At these VI treatment conditions, FM and GC3 values of red raspberries obtained were 28 N, and 8.4 N mm-1 , respectively. CONCLUSION: The optimal VI conditions identified in this study can be used to improve firmness and structural integrity of red raspberries by infusion of LMP and calcium. Findings on vacuum-impregnated red raspberries may be used to develop dehydrofrozen berries for incorporation into bakery and dairy products. © 2018 Society of Chemical Industry.
Subject(s)
Food Preservation/methods , Rubus/chemistry , Calcium Chloride/analysis , Food Preservation/instrumentation , Fruit/chemistry , Hardness , Pectins/analysis , VacuumABSTRACT
The interactions between pectins of different degrees of esterification (DE) and highly galloylated persimmon tannins with average degrees of polymerisation (DP26 and DP5) were investigated by UV-Vis spectrophotometry, dynamic light scattering, transmission electron microscopy, isothermal titration calorimetry and pyrene fluorescence methods Pectins displayed strong effects on the self-aggregation of persimmon tannins and improved the homogeneity of condensed tannin aggregates. The interaction between tannins and pectins may result from hydrogen bonding and hydrophobic interactions; by contrast, electrostatic interactions, which involve charged molecules in general, played no dominant role. In addition, the presence of gallate moieties in the high-polymerisation proanthocyanidin could enhance affinity with highly methylated pectins. Stronger association was observed with the high-polymerisation tannins (DP26) with high-methoxyl pectin (DE74) (Ka=(8.50±3.0)×103M-1) than with low-methylated pectin (DE30) (Ka=(3.62±1.92)×103M-1). The present results are expected to promote the application of the formed complexes as functional ingredients in food.