Modulating peppermint oil flavor release properties of emulsion-filled protein gels: Impact of cross-linking method and matrix composition.

For some food applications, it is desirable to control the flavor release profiles of volatile flavor compounds. In this study, the effects of crosslinking method and protein composition on the flavor release properties of emulsion-filled protein hydrogels were explored, using peppermint essential oil as a model volatile compound. Emulsion-filled protein gels with different properties were prepared using different crosslinking methods and gelatin concentrations. Flavor release from the emulsion gels was then monitored using an electronic nose, gas chromatography-mass spectrometry (GC-MS), and sensory evaluation. Enzyme-crosslinked gels had greater hardness and storage modulus than heat-crosslinked ones. The hardness and storage modulus of the gels increased with increasing gelatin concentration. For similar gel compositions, flavor release and sensory perception were faster from the heat-crosslinked gels than the enzyme-crosslinked ones. For the same crosslinking method, flavor release and perception decreased with increasing gelatin concentration, which was attributed to retardation of flavor diffusion through the hydrogel matrix. Overall, this study shows that the release of hydrophobic aromatic substances can be modulated by controlling the composition and crosslinking of protein hydrogels, which may be useful for certain food applications.

Egg Yolk Selenopeptides: Preparation, Characterization, and Immunomodulatory Activity.

In this study, egg yolk selenium peptides (Se-EYP) were prepared using double-enzyme hydrolysis combined with a shearing pretreatment. The properties of the selenopeptides formed were then characterized, including their yield, composition, molecular weight distribution, antioxidant activity, in vitro digestion, and immunomodulatory activity. The peptide yield obtained after enzymatic hydrolysis using a combination of alkaline protease and neutral protease was 74.5%, of which 82.6% had a molecular weight <1000 Da. The selenium content of the lyophilized solid product was 4.01 µg/g. Chromatography-mass spectrometry analysis showed that 88.6% of selenium in Se-EYP was in the organic form, of which SeMet accounted for 60.3%, SeCys2 for 21.8%, and MeSeCys for 17.9%. After being exposed to in vitro simulated digestion, Se-EYP still had 65.1% of oligopeptides present, and the in vitro antioxidant activity was enhanced. Moreover, Se-EYP exhibited superior immune detection indices, including immune organ index, level of immune factors in the serum, histopathological changes in the spleen, and selenium content in the liver. Our results suggest that Se-EYP may be used as selenium-enriched ingredients in functional food products.

Effects of frying on the surface oil absorption of wheat, potato, and pea starches.

The effects of structural changes on surface oil absorption characteristics of wheat starch, pea starch and potato starch during frying under different water content (20%, 30%, 40%, 50%) were studied. Fried potato starch with a 40% water content exhibited the highest surface oil content. When the initial moisture content reached 30%, the scattering intensity of the crystal layer structure decreased for wheat and pea starches, while the scattering peak for potato starch completely disappeared. At 40% moisture content, the amorphous phase ratio values for fried potato, wheat and pea starches were 13.50%, 11.78% and 11.24%, respectively, and the nitrogen adsorption capacity of fried starch decreased in turn. These findings that the structure of potato starch was more susceptible to degradation compared to pea starch and wheat starch, resulting in higher surface oil absorbed by potato starch during frying process.

Impact of thermal treatment on proanthocyanidin-pectin binary complexes: Insights from structural, rheological, antioxidant, and astringent properties.

In this study, the effects of thermal treatments on the structural, rheological, water mobility, antioxidant, and astringency properties of proanthocyanidin (PA)-pectin binary complexes were investigated. Thermal treatments (25, 63, or 85 °C) significantly decreased the particle size but increased the molecular weight of PA-pectin complexes, which indicated that heating altered the intermolecular and intramolecular interactions between PA and pectin. The thermal treatments reduced the apparent viscosity of both pectin and PA-pectin complexes, but the presence of proanthocyanidins (PAs) increased the apparent viscosity and water mobility of the PA-pectin complexes. Antioxidant activity analysis showed that the presence of pectin slightly reduced the antioxidant activity of the PAs, but there were no significant changes in the total phenolic content and antioxidant activity after thermal treatment. Finally, we found that pectin reduced the astringency of the PAs by forming PA-pectin complexes. Moreover, the thermal treatments also significantly reduced the astringency of the PA-pectin complexes.

Reinforcing alginate matrixes by tea polysaccharide conjugates or their stabilized nanoemulsion for probiotics encapsulation: Characterization, survival after gastrointestinal digestion and ambient storage.

Tea polysaccharide conjugates (TPC) were used as fillers in the form of biopolymer or colloidal particles (TPC stabilized nanoemulsion, NE) for reinforcing alginate (ALG) beads to improve the probiotic viability. Results demonstrated that adding TPC or NE to ALG beads significantly enhanced the gastrointestinal viability of encapsulated probiotics when compared to free cells. Moreover, the survivability of free and ALG encapsulated probiotics markedly decreased to 2.03 ± 0.05 and 2.26 ± 0.24 log CFU/g, respectively, after 2 weeks ambient storage, indicating pure ALG encapsulation had no effective storage protective capability. However, adding TPC or NE could greatly enhance the ambient storage viability of probiotics, with ALG + NE beads possessing the best protection (8.93 ± 0.06 log CFU/g) due to their lower water activity and reduced porosity. These results suggest that TPC and NE reinforced ALG beads have the potential to encapsulate, protect and colonic delivery of probiotics.

Vitamin C fortification: need and recent trends in encapsulation technologies.

The multifaceted role of vitamin C in human health intrudes several biochemical functions that are but not limited to antioxidant activity, homoeostasis, amino acid synthesis, collagen synthesis, osteogenesis, neurotransmitter production and several yet to be explored functions. In absence of an innate biosynthetic pathway, humans are obligated to attain vitamin C from dietary sources to maintain its optimal serum level (28 µmol/L). However, a significant amount of naturally occurring vitamin C may deteriorate due to food processing, storage and distribution before reaching to the human gastrointestinal tract, thus limiting or mitigating its disease combating activity. Literature acknowledges the growing prevalence of vitamin C deficiency across the globe irrespective of geographic, economic and population variations. Several tools have been tested to address vitamin C deficiency, which are primarily diet diversification, biofortification, supplementation and food fortification. These strategies inherit their own advantages and limitations. Opportunely, nanotechnology promises an array of delivery systems providing encapsulation, protection and delivery of susceptible compounds against environmental factors. Lack of clear understanding of the suitability of the delivery system for vitamin C encapsulation and fortification; growing prevalence of its deficiency, it is a need of the hour to develop and design vitamin C fortified food ensuring homogeneous distribution, improved stability and enhanced bioavailability. This article is intended to review the importance of vitamin C in human health, its recommended daily allowance, its dietary sources, factors donating to its stability and degradation. The emphasis also given to review the strategies adopted to address vitamin c deficiency, delivery systems adopted for vitamin C encapsulation and fortification.

Encapsulation of propionic acid within the aqueous phase of water-in-oil emulsions: reduced thermal volatilization and enhanced gastrointestinal stability.

Propionic acid (PA) is a water-soluble substance that has been shown to be beneficial for improving colon-related diseases. However, its appliance as a nutraceutical ingredient is hampered by its volatility, irritating odor, and easy absorption in the stomach and small intestine. A chitosan solution containing propionic acid was dispersed in a palm oil/corn oil mixture with polyglycerol polyricinoleate (PGPR) to form PA-loaded water-in-oil (W/O) emulsions. The stability of the emulsions was improved by the inclusion of both chitosan and palm oil, where the chitosan reduced the emulsion particle size and palm oil increased the viscosity. The thermal volatility and storage stability of the encapsulated propionic acid were significantly improved due to the stability of emulsion structure and hydrogen bonding between chitosan and propionic acid. Around 56% of propionic acid remained within the aqueous phase after the simulated gastrointestinal digestion. Our results indicate that W/O emulsions might be candidates as colon-targeted delivery systems for propionic acid, which could be beneficial for maintaining colon health.

Advances in emulsion-based delivery systems for nutraceuticals: Utilization of interfacial engineering approaches to control bioavailability.

Designing functional foods fortified with nutraceuticals is an important focus of modern food science with the aim of improving human health and wellbeing. However, many nutraceuticals have a low water solubility and poor physiochemical stability, which makes it challenging to incorporate into food matrices. Moreover, nutraceuticals may also have a low bioavailability after oral administration because they can either precipitate or chemically degrade, and/or might not be absorbed in the gastrointestinal tract. Numerous strategies have been developed and applied to encapsulate and deliver nutraceuticals. Emulsions are a kind of colloid delivery system where one phase is dispersed into another immiscible phase in the form of small droplets. These droplets have been widely used as carriers to improve the dispersibility, stability, and absorption of nutraceuticals. Many factors affect the formation and stability of emulsions, with the interfacial coating formed around the droplets by emulsifiers and other stabilizers being one of the most important. Hence, interfacial engineering principles are needed for the design and development of emulsions. Different approaches to interfacial engineering have been developed, which can help to modulate the dispersibility, stability, and bioavailability of nutraceuticals. This chapter summarizes recent research in developing interfacial engineering approaches and their impacts on the bioavailability of nutraceuticals.

Hypolipidemic effects of macadamia oil are related to AMPK activation and oxidative stress relief: In vitro and in vivo studies.

Macadamia oil is rich in monounsaturated fatty acids, especially a high level of palmitoleic acid, which may have beneficial health effects by lowering blood lipid levels. In our study, the hypolipidemic effects of macadamia oil and its potential mechanisms of action were investigated using a combination of in vitro and in vivo assays. The results showed that macadamia oil significantly reduced lipid accumulation, and improved triglycerides (TG), total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) levels in oleic acid-induced high-fat HepG2 cells. The macadamia oil treatment also exhibited antioxidant effects, as seen by its ability to reduce reactive oxygen species and malondialdehyde (MDA) levels, and increase superoxide dismutase (SOD) activity. The effects of 1000 µg/mL of macadamia oil were comparable to that of 4.19 µg/mL simvastatin. The results of qRT-PCR and western blotting analyses indicated that macadamia oil effectively inhibited hyperlipidemia by reducing the expression levels of SREBP-1c, PPAR-γ, ACC and FAS and by enhancing the expression levels of HO-1, NRF2 and γ-GCS, via AMPK activation and oxidative stress relief, respectively. In addition, different doses of macadamia oil were found to significantly improve liver lipid accumulation, reduce serum and liver TC, TG, and LDL-C levels, increase HDL-C levels, increase antioxidant enzyme (SOD, GSH-Px, and T-AOC) activity, and decrease the MDA content of mice on a high-fat diet. These results indicated that macadamia oil had a hypolipidemic effect and provide insights that might facilitate the development of functional food and dietary supplements.

Utilization of plant extracts to control the safety and quality of fried foods-A review.

Frying is one of the most common methods of preparing foods. However, it may lead to the formation of potentially hazardous substances, such as acrylamide, heterocyclic amines, trans fatty acids, advanced glycation end products, hydroxymethyl furfural and polycyclic aromatic hydrocarbons, and adversely alter the desirable sensory attributes of foods, thereby reducing the safety and quality of fried foods. Currently, the formation of toxic substances is usually reduced by pretreatment of the raw materials, optimization of process parameters, and the use of coatings. However, many of these strategies are not highly effective at inhibiting the formation of these undesirable reaction products. Plant extracts can be used for this purpose because of their abundance, safety, and beneficial functional attributes. In this article, we focus on the potential of using plant extracts to inhibit the formation of hazardous substances, so as to improve the safety of fried food. In addition, we also summarized the effects of plant extracts, which inhibit the production of hazardous substances, on food sensory aspects (flavor, color, texture, and taste). Finally, we highlight areas where further research is required.

Capsaicin encapsulated in W/O/W double emulsions fabricated via ethanol-induced pectin gelling: Improvement of bioaccessibility and reduction of irritation.

Capsaicin is a water-insoluble bioactive component with several beneficial physiological functions. However, the widespread application of this hydrophobic phytochemical is limited by its low water-solubility, intense irritation, and poor bioaccessibility. These challenges can be overcome by entrapping capsaicin within the internal water phase of water-in-oil-in-water (W/O/W) double emulsions via using ethanol to induce pectin gelling. In this study, ethanol was used both to dissolve capsaicin and to promote pectin gelation, thereby forming capsaicin-loaded pectin hydrogels that were used as the internal water phase of the double emulsions. Pectin addition improved the physical stability of the emulsions and led to a high encapsulation efficiency of capsaicin (>70 % after 7d storage). After simulated oral and gastric digestion, capsaicin-loaded double emulsions maintained their compartmentalized structure, avoiding capsaicin leakage in the month and stomach. The double emulsions were digested in the small intestine, thereby releasing the capsaicin. Capsaicin bioaccessibility was significantly enhanced after encapsulation, which was attributed to mixed micelle formation by the digested lipid phase. Furthermore, encapsulation of capsaicin within the double emulsions reduced the irritation in the gastrointestinal tissues of mice. This kind of double emulsion may have great potential for the development of more palatable capsaicin-loaded functional food products.

Dual role of polyglycerol vitamin E succinate in emulsions: An efficient antioxidant emulsifier.

α-Tocopherol, as an oil-soluble vitamin with strong antioxidant activity. It is the most naturally abundant and biologically active form of vitamin E in humans. In this study, a novel emulsifier (PG20-VES) was synthesized by attaching hydrophilic twenty-polyglycerol (PG20) to hydrophobic vitamin E succinate (VES). This emulsifier was shown to have a relatively low critical micelle concentration (CMC = 3.2 µg/mL). The antioxidant activities and emulsification properties of PG20-VES were compared with those of a widely used commercial emulsifier: D-α-Tocopherol polyethylene glycol 1000 succinate (TPGS). PG20-VES exhibited a lower interfacial tension, stronger emulsifying capacity and similar antioxidant property to TPGS. An in vitro digestion study showed that lipid droplets coated by PG20-VES were digested under simulated small intestine conditions. This study showed that PG20-VES is an efficient antioxidant emulsifier, which may have applications in the formulation of bioactive delivery systems in the food, supplement, and pharmaceutical industries.

Utilization of diverse protein sources for the development of protein-based nanostructures as bioactive carrier systems: A review of recent research findings (2010-2021).

Consumer awareness of the relationship between health and nutrition has caused a substantial increase in the demand for nutraceuticals and functional foods containing bioactive compounds (BACs) with potential health benefits. However, the direct incorporation of many BACs into commercial food and beverage products is challenging because of their poor matrix compatibility, chemical instability, low bioavailability, or adverse impact on food quality. Advanced encapsulation technologies are therefore being employed to overcome these problems. In this article, we focus on the utilization of plant and animal derived proteins to fabricate micro and nano-particles that can be used for the oral delivery of BACs such as omega-3 oils, vitamins and nutraceuticals. This review comprehensively discusses different methods being implemented for fabrications of protein-based delivery vehicles, types of proteins used, and their compatibility for the purpose. Finally, some of the challenges and limitations of different protein matrices for encapsulation of BACs are deliberated upon. Various approaches have been developed for the fabrication of protein-based microparticles and nanoparticles, including injection-gelation, controlled denaturation, and antisolvent precipitation methods. These methods can be used to construct particle-based delivery systems with different compositions, sizes, surface hydrophobicity, and electrical characteristics, thereby enabling them to be used in a wide range of applications.

Encapsulation of Spirulina protein hydrolysates in liposomes: Impact on antioxidant activity and gastrointestinal behavior.

A Spirulina hydrolysate was encapsulated within anionic liposomes composed of soybean lecithin and γ-oryzanol at an encapsulation efficiency of 90 %. A combination of 10 mg/mL hydrolysate and 1.3 mg/mL γ-oryzanol exhibited a significant synergism in inhibition of the formation of thiobarbituric acid-reactive substances (TBARS) and provided good protection of the liposomes against oxidation. The particle size of the liposomes increased significantly in the presence of the hydrolysate. Chitosomes were formed by coating the anionic liposomes with cationic chitosan. The antioxidant activity of the hydrolysate-loaded liposomes and chitosomes and free hydrolysate decreased under the highly acidic conditions in the stomach with the reduction in activity being greatest for the free hydrolysate. However, after exposure to small intestine conditions, the antioxidant activity of all formulations increased significantly (p < 0.05). This study highlights the potential of non-coated and coated liposomes to increase the stability and bioactivity of bioactive protein hydrolysates.

Applications of the INFOGEST In Vitro Digestion Model to Foods: A Review.

The in vitro digestion model developed by the INFOGEST international consortium is widely used to simulate the physicochemical processes occurring inside the human gastrointestinal tract (mouth, stomach, and small intestine) during the digestion of foods. In this review, we provide a brief overview of the INFOGEST method and the procedures used to measure the digestion of macronutrients (lipids, proteins, and starch), the bioaccessibility of bioactive agents (vitamins, minerals, and nutraceuticals), and the changes in the structure and physical properties of foods under gastrointestinal conditions (particle size, charge, and location). We then review the application of the INFOGEST method for monitoring the gastrointestinal fate of different kinds of foods and beverages, including dairy, egg, meat, seafood, fruit, vegetable, cereal, and emulsified products. We also discuss the application of this method for studying the digestibility of next-generation plant-based foods, such as meat, seafood, dairy, and egg analogs. Finally, the benefits and limitations of this standardized in vitro digestion model are assessed.

Health-promoting properties of barley: A review of nutrient and nutraceutical composition, functionality, bioprocessing, and health benefits.

Barley is one of the world's oldest cereal crops forming an important component of many traditional diets. Barley is rich in a variety of bioactive phytochemicals with potentially health-promoting effects. However, its beneficial nutritional attributes are not being fully realized because of the limited number of foods it is currently utilized in. It is therefore crucial for the food industry to produce novel barley-based foods that are healthy and cater to customers' tastes. This article reviews the nutritional and functional characteristics of barley, with an emphasis on its ability to improve glucose/lipid metabolism. Then, recent trends in barley product development are discussed. Finally, current limitations and future research directions in glucolipid modulation mechanisms and barley bioprocessing are discussed.

Fortification by design: A rational approach to designing vitamin D delivery systems for foods and beverages.

Over the past few decades, vitamin D deficiency has been recognized as a serious global public health challenge. The World Health Organization has recommended fortification of foods with vitamin D, but this is often challenging because of its low water solubility, poor chemical stability, and low bioavailability. Studies have shown that these challenges can be overcome by encapsulating vitamin D within well-designed delivery systems containing nanoscale or microscale particles. The characteristics of these particles, such as their composition, size, structure, interfacial properties, and charge, can be controlled to attain desired functionality for specific applications. Recently, there has been great interest in the design, production, and application of vitamin-D loaded delivery systems. Many of the delivery systems reported in the literature are unsuitable for widespread application due to the complexity and high costs of the processing operations required to fabricate them, or because they are incompatible with food matrices. In this article, the concept of "fortification by design" is introduced, which involves a systematic approach to the design, production, and testing of colloidal delivery systems for the encapsulation and fortification of oil-soluble vitamins, using vitamin D as a model. Initially, the challenges associated with the incorporation of vitamin D into foods and beverages are reviewed. The fortification by design concept is then described, which involves several steps: (i) selection of appropriate vitamin D form; (ii) selection of appropriate food matrix; (iii) identification of appropriate delivery system; (iv) identification of appropriate production method; (vii) establishment of appropriate testing procedures; and (viii) system optimization.

In Vitro-In Vivo Study of the Impact of Excipient Emulsions on the Bioavailability and Antioxidant Activity of Flavonoids: Influence of the Carrier Oil Type.

The influence of the carrier oil type on the bioavailability and bioactivity of flavonoids (quercetin, kaempferol, and apigenin) was examined using in vitro digestion, in situ intestinal perfusion, and pharmacokinetic studies. Here, medium-chain triglycerides (MCTs), long-chain triglycerides (LCTs), or MCT/LCT mixtures (1:1, w/w) served as the oil phase of excipient emulsions. Overall, the bioavailability and antioxidant activity of flavonoids increased when they were coingested with excipient emulsions. The in vitro bioaccessibility of flavonoids was affected by the carrier oil: LCT (17.9-22.8%) > MCT/LCT (12.1-13.7%) > MCT (9.2-12.6%). These differences were mainly attributed to the fact that the mixed micelles formed after the digestion of LCTs had larger hydrophobic domains to solubilize more flavonoids. However, in vivo pharmacokinetic experiments showed that the flavonoid concentrations in rat serum were comparable for all carrier oils (p > 0.05). Our results assist in formulating excipient emulsions to enhance the efficacy of flavonoids.

Improvement of pasting and gelling properties of potato starch using a direct vapor-heat moisture treatment.

Conventional hydrothermal methods are lengthy and require high energy consumption. In this study, a quick and energy-saving direct vapor-heat moisture treatment (DV-HMT) method was used to improve the pasting and gelling properties of potato starch under the condition of high temperature (130 °C) and short periods (1, 3, 5, and 7 min). X-ray diffraction analysis exhibited that the relative crystallinity of DV-HMT starches decreased with the extension of treatment time. Small angle X-ray scattering measurements showed that the average thickness of the crystalline lamellae decreased from 6.193 to 5.937 nm, while the average thickness of the amorphous lamellae increased from 3.160 to 3.395 nm. Rapid visco-analyzer measurements exhibited that the breakdown values decreased to 0 mPa s for DV-HMT starches, indicating that this hydrothermal treatment led to starches with high resistance to heating and shearing. The gel hardness of starch treated by DV-HMT for 3 min (266 g) was around 5.4-fold higher than for non-treated starch (41 g). Considering the simple operation of DV-HMT and the short treatment periods (≤ 7 min) used in this study, DV-HMT could be a superior option to enhance the physicochemical and functional properties of starch.

A review of recent progress in improving the bioavailability of nutraceutical-loaded emulsions after oral intake.

Increasing awareness of the health benefits of specific constituents in fruits, vegetables, cereals, and other whole foods has sparked a broader interest in the potential health benefits of nutraceuticals. Many nutraceuticals are hydrophobic substances, which means they must be encapsulated in colloidal delivery systems. Oil-in-water emulsions are one of the most widely used delivery systems for improving the bioavailability and bioactivity of these nutraceuticals. The composition and structure of emulsions can be designed to improve the water dispersibility, physicochemical stability, and bioavailability of the encapsulated nutraceuticals. The nature of the emulsion used influences the interfacial area and properties of the nutraceutical-loaded oil droplets in the gastrointestinal tract, which influences their digestion, as well as the bioaccessibility, metabolism, and absorption of the nutraceuticals. In this article, we review recent in vitro and in vivo studies on the utilization of emulsions to improve the bioavailability of nutraceuticals. The findings from this review should facilitate the design of more efficacious nutraceutical-loaded emulsions with increased bioactivity.