Knapping force as a function of stone heat treatment.

We propose a quantitative framework for understanding the knapping force requirements imposed by different raw materials in their unheated and heat-treated states. Our model interprets stone tool knapping as being the result of cracks formed during the first impact with a hammer stone, followed by continued stressing of these cracks that eventually leads to flake detachment. We combine bending strength, indentation fracture resistance and "Griffith" crack lengths of flint and silcrete to obtain functions identifying critical forces for flaking without or after heat treatment. We argue that these forces are a key factor for understanding the "knappability" of different raw materials, because only forces with 100N or less can be used for very precise strike control. Our model explains for the first time why experimental knappers frequently observe that flint (a stronger material, which, in our case, has a strength above 100 MPa) is easier to knap than silcretes (which is relatively weaker with strength values at or below 60 MPa). Our findings allow for understanding the differences between heat-treated and untreated flint and silcrete in terms of knapping quality, and they allow to compare the qualities of different raw materials.

Hyperthermia-induced doxorubicin delivery from thermosensitive liposomes via MR-HIFU in a pig model.

PURPOSE: Encapsulation of cytotoxic drugs for a localized release is an effective way to increase the therapeutic window of such agents. In this article we present the localized release of doxorubicin (DOX) from phosphatidyldiglycerol (DPPG2) based thermosensitive liposomes using MR-HIFU mediated hyperthermia in a swine model. MATERIALS AND METHODS: German landrace pigs of weights between 37.5 and 53.5 kg received a 30-min infusion of DOX containing thermosensitive liposomes (50 mg DOX/m2). The pigs' biceps femoris was treated locally in two separate target areas with mild hyperthermia using magnetic resonance guided high intensity focused ultrasound, starting 10 min and 60 min after initiation of the infusion, respectively. The pharmacokinetics and biodistribution of DOX were determined and an analysis of the treatment parameters' influence was performed. RESULTS: Compared to untreated tissue, we found a 15-fold and a 7-fold increase in DOX concentration in the muscle volumes that had undergone hyperthermia starting 10 min and 60 min after the beginning of the infusion, respectively. The pharmacokinetic analysis showed a prolonged circulation time of DOX and a correlation between the AUC of extra-liposomal DOX in the bloodstream and the amount of DOX accumulated in the target tissue. CONCLUSIONS: We have demonstrated a workflow for MR-HIFU hyperthermia drug delivery that can be adapted to a clinical setting, showing that HIFU-hyperthermia is a suitable method for local drug release of DOX using DPPG2 based thermosensitive liposomes in stationary targets. Using the developed pharmacokinetic model, an optimization of the drug quantity deposited in the target via the timing of infusion and hyperthermia should be possible.

Visualization of thermal washout due to spatiotemporally heterogenous perfusion in the application of a model-based control algorithm for MR-HIFU mediated hyperthermia.

PURPOSE: This article will report results from the in-vivo application of a previously published model-predictive control algorithm for MR-HIFU hyperthermia. The purpose of the investigation was to test the controller's in-vivo performance and behavior in the presence of heterogeneous perfusion. MATERIALS AND METHODS: Hyperthermia at 42°C was induced and maintained for up to 30 min in a circular section of a thermometry slice in the biceps femoris of German landrace pigs (n=5) using a commercial MR-HIFU system and a recently developed MPC algorithm. The heating power allocation was correlated with heat sink maps and contrast-enhanced MRI images. The temporal change in perfusion was estimated based on the power required to maintain hyperthermia. RESULTS: The controller performed well throughout the treatments with an absolute average tracking error of 0.27 ± 0.15 °C and an average difference of 1.25 ± 0.22 °C between T10 and T90. The MPC algorithm allocates additional heating power to sub-volumes with elevated heat sink effects, which are colocalized with blood vessels visible on contrast-enhanced MRI. The perfusion appeared to have increased by at least a factor of ∼1.86 on average. CONCLUSIONS: The MPC controller generates temperature distributions with a narrow spectrum of voxel temperatures inside the target ROI despite the presence of spatiotemporally heterogeneous perfusion due to the rapid thermometry feedback available with MR-HIFU and the flexible allocation of heating power. The visualization of spatiotemporally heterogeneous perfusion presents new research opportunities for the investigation of stimulated perfusion in hypoxic tumor regions.

The status of imported Barremian-Bedoulian flint in north-eastern Iberia during the Middle Neolithic. Insights from the variscite mines of Gavà (Barcelona).

Barremian-Bedoulian flint from the Vaucluse region (western Provence, SE France), is traditionally considered one of the most significant chrono-cultural markers of the Chasséen culture during the Middle Neolithic (end of the 5th and beginning of the 4th millennium BC). Diffusion of Provençal flints became massive during the first half of the 4th millennium BC, penetrating in several neighbouring cultural spheres such as the Sepulcros de Fosa culture in north-eastern Iberia. The integrated study of the lithic assemblages from the variscite mines of Gavà (Barcelona) and its contextualization within the Sepulcros de Fosa culture in north-eastern Iberia have revealed unexpected complexity in the modes of consumption, use and status of imported Barremian-Bedoulian industries in north-eastern Iberia during the 5th to 4th millennia cal. BC transition. Local communities within this region, already controlling extraction and regional diffusion of variscite ornaments, exerted control over the fluxes of Vauclusian flint south of the Pyrenees, where it had a triple status (functional, symbolic and both). In addition, the results provide complementary data to better understand relevant aspects of the nature and organisation of Barremian-Bedoulian flint exploitation and early supply systems at the Provençal producing sites during the later phase of the Chasséen culture.

Early Evidence for the Extensive Heat Treatment of Silcrete in the Howiesons Poort at Klipdrift Shelter (Layer PBD, 65 ka), South Africa.

Heating stone to enhance its flaking qualities is among the multiple innovative adaptations introduced by early modern human groups in southern Africa, in particular during the Middle Stone Age Still Bay and Howiesons Poort traditions. Comparatively little is known about the role and impact of this technology on early modern human behaviors and cultural expressions, due, in part, to the lack of comprehensive studies of archaeological assemblages documenting the heat treatment of stone. We address this issue through an analysis of the procedure used for heating and a technological analysis of a lithic assemblage recovered from one Howiesons Poort assemblage at Klipdrift Shelter (southern Cape, South Africa). The resulting data show extensive silcrete heat treatment, which adds a new dimension to our understanding of fire-related behaviors during the Howiesons Poort, highlighting the important role played by a heat treatment stage in the production of silcrete blades. These results are made possible by our new analytical procedure that relies on the analysis of all silcrete artifacts. It provides direct evidence of a controlled use of fire which took place during an early stage of core exploitation, thereby impacting on all subsequent stages of the lithic chaîne opératoire, which, to date, has no known equivalent in the Middle Stone Age or Middle Paleolithic record outside of southern Africa.