Human periodontal ligament stem cell encapsulation in alginate-fibrin-platelet lysate microbeads for dental and craniofacial regeneration.

OBJECTIVE: Tissue engineering is promising for dental and craniofacial regeneration. The objectives of this study were to develop a novel xeno-free alginate-fibrin-platelet lysate hydrogel with human periodontal ligament stem cells (hPDLSCs) for dental regeneration, and to investigate the proliferation and osteogenic differentiation of hPDLSCs using hPL as a cell culture nutrient supplement. METHODS: hPDLSCs were cultured with Dulbecco's modified eagle medium (DMEM), DMEM + 10% fetal bovine serum (FBS), and DMEM + hPL (1%, 2.5%, and 5%). hPDLSCs were encapsulated in alginate-fibrin microbeads (Alg+Fib), alginate-hPL microbeads (Alg+hPL), or alginate-fibrin-hPL microbeads (Alg+Fib+hPL). hPDLSCs encapsulated in alginate microbeads were induced with an osteogenic medium containing hPL or FBS. Quantitative real-time polymerase chain reaction (qRT-PCR), alkaline phosphatase (ALP) activity, ALP staining, and alizarin red (ARS) staining was investigated. RESULTS: hPDLSCs were released faster from Alg+Fib+hPL than from Alg+hPL. At 14 days, ALP activity was 44.1 ± 7.61 mU/mg for Alg+Fib+hPL group, higher than 28.07 ± 5.15 mU/mg of Alg+Fib (p<0.05) and 0.95 ± 0.2 mU/mg of control (p<0.01). At 7 days, osteogenic genes (ALP, RUNX2, COL1, and OPN) in Alg+Fib+hPL and Alg+Fib were 3-10 folds those of control. At 21 days, the hPDLSC-synthesized bone mineral amount in Alg+Fib+hPL and Alg+Fib was 7.5 folds and 4.3 folds that of control group, respectively. CONCLUSIONS: The 2.5% hPL was determined to be optimal for hPDLSCs. Adding hPL into alginate hydrogel improved the viability of the hPDLSCs encapsulated in the microbeads. The hPL-based medium enhanced the osteogenic differentiation of hPDLSCs in Alg+Fib+hPL construct, showing a promising xeno-free approach for delivering hPDLSCs to enhance dental, craniofacial and orthopedic regenerations.

Light Energy Dose and Photosensitizer Concentration Are Determinants of Effective Photo-Killing against Caries-Related Biofilms.

Caries-related biofilms and associated complications are significant threats in dentistry, especially when biofilms grow over dental restorations. The inhibition of cariogenic biofilm associated with the onset of carious lesions is crucial for preventing disease recurrence after treatment. This in vitro study defined optimized parameters for using a photosensitizer, toluidine blue O (TBO), activated via a red light-emitting diode (LED)-based wireless device to control the growth of cariogenic biofilms. The effect of TBO concentrations (50, 100, 150, and 200 µg/mL) exposed to light or incubated in the dark was investigated in successive cytotoxicity assays. Then, a mature Streptococcus mutans biofilm model under sucrose challenge was treated with different TBO concentrations (50, 100, and 150 µg/mL), different light energy doses (36, 108, and 180 J/cm2), and different incubation times before irradiation (1, 3, and 5 min). The untreated biofilm, irradiation with no TBO, and TBO incubation with no activation represented the controls. After treatments, biofilms were analyzed via S. mutans colony-forming units (CFUs) and live/dead assay. The percentage of cell viability was within the normal range compared to the control when 50 and 100 µg/mL of TBO were used. Increasing the TBO concentration and energy dose was associated with biofilm inhibition (p < 0.001), while increasing incubation time did not contribute to bacterial elimination (p > 0.05). Irradiating the S. mutans biofilm via 100 µg/mL of TBO and ≈180 J/cm2 energy dose resulted in ≈3-log reduction and a higher amount of dead/compromised S. mutans colonies in live/dead assay compared to the control (p < 0.001). The light energy dose and TBO concentration optimized the bacterial elimination of S. mutans biofilms. These results provide a perspective on the determining parameters for highly effective photo-killing of caries-related biofilms and display the limitations imposed by the toxicity of the antibacterial photodynamic therapy's chemical components. Future studies should support investigations on new approaches to improve or overcome the constraints of opportunities offered by photodynamic inactivation of caries-related biofilms.

pH-responsive calcium and phosphate-ion releasing antibacterial sealants on carious enamel lesions in vitro.

OBJECTIVE: Nanoparticles of amorphous calcium phosphate (NACP) have shown beneficial effects of a robust release of calcium and phosphate ions at low pH. Here we examined the effect of NACP combined into antibacterial/rechargeable sealant formulations on the mineral content of artificial carious enamel during pH-cycling mimicking intraoral conditions. MATERIALS AND METHODS: NACP and a quaternary ammonium methacrylate (DMAHDM) were synthesized. Three resin sealants were formulated: "base formulation" (without NACP and DMAHDM, used as control); "NACP on the base formulation" (with 20 wt.% NACP); "NACP on the antibacterial formulation" (with 20 wt.% NACP and 5 wt.% DMAHDM). Standardized enamel windows on sealed non-carious human molars were demineralized and randomly divided into four groups: three groups of teeth sealed with the experimental materials and one group of teeth without sealant application used as negative control. The teeth were exposed to pH cycling regime. The changes in the mineral content of enamel were assessed by quantitative surface hardness loss in percentage (%SHL) and qualitative analyses via scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM-EDX) and polarized light microscopy (PLM). RESULTS: The contact with NACP-containing formulations provoked significant lower %SHL on sealed enamel (p < 0.05) in comparison to control groups. This outcome was supported by the results of SEM-EDX, in which the enamel presented higher percentages of calcium and phosphate than control groups. PLM showed less enamel superficial demineralization around the sealants containing NACP. CONCLUSION: NACP incorporated into an antibacterial sealant protected the enamel against demineralization. pH-responsive calcium and phosphate-ion releasing sealants with antimicrobial and rechargeable properties may be a reliable complementary approach for caries management. CLINICAL SIGNIFICANCE: Dental caries is the most common childhood disease. Enamel demineralization represents the initial stage of carious lesion formation and may lead to invasive dental procedures. We explored the role of amorphous calcium phosphate (NACP) in a newly-developed antibacterial and rechargeable dental sealant formulation as a preventive approach.

Multifunctional antibacterial dental sealants suppress biofilms derived from children at high risk of caries.

Dental caries in children is a leading worldwide oral health concern. Combining antibacterial and remineralizing additives within dental sealants is a promising approach for caries prevention. Saliva contains oral bacteria that are indicative of the whole oral microbiome and may have the ability to reflect the dysbiosis present in patients with dental caries. Here, we used the saliva of children at a low and high risk of caries to culture microcosm biofilms resembling caries-associated microbial communities and investigated the changes in the biofilms promoted by the formulated dental sealants containing dimethylaminohexadecyl methacrylate (DMAHDM), a quaternary ammonium monomer, and nanoparticles of amorphous calcium phosphate (NACP). Ten volunteers were selected from each caries-risk condition for saliva collection. Biofilms were grown on the tested sealant samples using a 48 h-microcosm biofilm model. The biofilm growth, metabolic behavior, and bacterial acid production were combined with 16S rRNA sequencing analysis for the assessment of the biofilm grown over the material. The DMAHDM-NACP dental sealant formulations promoted a significant reduction in the population of mutans streptococci, total streptococci, lactobacilli, and total microorganisms in the biofilms regardless of the risk status of the donor child's saliva (p < 0.05). Metabolic and lactic acid production was greatly reduced when in contact with the DMAHDM-NACP sealants in both the sources of inoculum. The relative abundance of the Streptococcus genera derived from patients at a high risk of caries was reduced on contact with the antibacterial sealant. The dental sealant formulations were effective in modulating the growth of the biofilm derived from the saliva of children at a low and high risk of caries. The sealants formulated herein with dual functions and purpose for biointeractivity to prevent biofilm formation and mineral loss can be a reliable complementary strategy to decrease the incidence of carious lesions in children at a high risk of caries.

Dimethylaminododecyl methacrylate inhibits Candida albicans and oropharyngeal candidiasis in a pH-dependent manner.

The prevalence of stomatitis, especially that caused by Candida albicans, has highlighted the need for new antifungal agents. We previously found that a type of quaternary ammonium salts, dimethylaminododecyl methacrylate (DMADDM), incorporated in dental materials inhibited the growth and hyphal development of C. albicans. However, how the quaternary ammonium salts inhibited the fungal pathogens and whether the oral condition, such as salivary pH variation under different diseases, can affect the antimicrobial capacity of quaternary ammonium salts is unknown. This study evaluated the antifungal effects of DMADDM at different pH in vitro and in vivo. A pH-dependent antifungal effect of DMADDM was observed in planktonic and biofilm growth. DMADDM enhanced antifungal activity at alkaline pH. Two pH-regulated genes (PHR1/PHR2) of C. albicans were correlated with the pH-dependent antifungal effects of DMADDM. The PHR1/PHR2 genes and pH values regulated the zeta potential of C. albicans, which then influenced the binding between C. albicans cells and DMADDM. The pH-dependent antifungal activity of DMADDM was then substantiated in a murine oropharyngeal candidiasis model. We directly demonstrated that the antifungal abilities of quaternary ammonium salts relied on the cell zeta potential which affected the binding between fungal cells and quaternary ammonium salts. These findings suggest a new antifungal mechanism of quaternary ammonium under different pH and that DMADDM can be a potential antifungal agent applied in dental materials and stomatitis therapy.Key Points • DMADDM has stronger antifungal activity in alkaline than in acidic pH conditions. • The pH values and pH-regulated genes can affect the zeta potential of fungal cells. • Zeta potential of fungal cells directly affect the binding between DMADDM and cells. Graphical abstract Schematic diagram of the antifungal activities of DMADDM at different pH values.

Comparison of the use of d-enantiomeric and l-enantiomeric antimicrobial peptides incorporated in a calcium-chelating irrigant against Enterococcus faecalis root canal wall biofilms.

OBJECTIVES: To compare the anti-biofilm efficacy of two antimicrobial peptides (AMPs), 1018 and DJK-5, in disrupting canal wall biofilms in the isthmus, canal and dentinal tubules of single-rooted maxillary premolars. METHODS: Enterococcus faecalis single-species biofilms were formed in-situ in the root canal system of the premolars (n = 91). Confocal laser scanning microscopy, bacterial sampling, colony-forming unit counting, XTT assay, lactate dehydrogenase assay and phenol-sulphuric acid method were used to identify the anti-biofilm efficacy of both AMPs and their influence on bacterial metabolic activity. RESULTS: Both AMPs disrupted in-situ E. faecalis biofilms and altered their metabolic activity. At 20 µg/mL, the d-enantiomeric AMP DJK-5 killed 55.5 %, 57.3 % and 55.8 % of biofilm bacteria in the isthmus, canal and dentinal tubules, respectively, in 1 min. In contrast, the l-enantiomeric AMP 1018 only eradicated 25.6 %, 25.5 % and 27.5 % of biofilm bacteria in the isthmus, canal and dentinal tubules, respectively, within the same time. Anti-biofilm efficacy of the root canal irrigants tested were in the order: 6 % NaOCl > 20 µg/mL DJK-5 > 10 µg/mL DJK-5 > 20 µg/mL 1018 > 10 µg/mL 1018 > 0.9 % NaCl. CONCLUSIONS: The present results are confirmatory of previous studies, in that d-enantiomeric AMPs exhibit more potent antibacterial properties than l-enantiomeric AMPs against E. faecalis biofilms within the canal space. Nevertheless, the potency of both AMPs are concentration-dependent. Incorporation of these agents into EDTA, a non-antibacterial calcium-chelating irrigant for removal of the inorganic component of the canal space debris, does not reduce the efficacy of either AMP. CLINICAL SIGNIFICANCE: The present study provides the proof of concept that incorporation of an antimicrobial peptide into a calcium-chelating root canal irrigant enhances the disinfection of intratubular single-species biofilms during smear layer and smear plug removal.

Effects of 3-dimensional Bioprinting Alginate/Gelatin Hydrogel Scaffold Extract on Proliferation and Differentiation of Human Dental Pulp Stem Cells.

INTRODUCTION: Alginate/gelatin hydrogel (Alg-Gel) scaffold has been applied in tissue engineering, but the research on its application in dental tissues regeneration is still lacking. We investigated the effect of this scaffold on human dental pulp stem cells (hDPSCs). METHODS: hDPSCs were cultured in both Alg-Gel and 3D-printed Alg-Gel scaffolds. Cell growth and adhesion were compared using fluorescein isothiocyanate-phalloidin staining and scanning electron microscopic micrographs. Changes in the proliferation in hDPSCs cultured in the complete culture medium containing aqueous extracts of the Alg-Gel or 3D-printed Alg-Gel scaffolds were examined using Cell Counting Kit-8 assay and flow cytometry analysis. Cells were cultured in the mineralization medium containing aqueous extracts of the Alg-Gel or 3D-printed Alg-Gel scaffolds for 7 or 14 days, and the differentiation of cells was shown by alizarin red S staining and alkaline phosphatase staining. The messenger RNA and protein expression of mineralization-related genes were detected with real-time polymerase chain reaction and Western blotting. Elemental analysis was used to test the material extract composition. RESULTS: More cells were grown and adhered to the 3D-printed Alg-Gel scaffolds than the Alg-Gel scaffolds. The aqueous extracts of 3D-printed scaffolds can promote cell proliferation, and compared with Alg-Gel scaffolds, the extracts of 3D-printed scaffolds were more effective. Compared with the negative control group, 3D-printed Alg-Gel scaffold and Alg-Gel scaffold aqueous extracts promoted osteogenic/odontoblastic differentiation of hDPSCs with the enhanced formation of bone-like nodules and the alkaline phosphatase staining. The expression of mineralization-related genes was also up-regulated. 3D-printed scaffold aqueous extract contained more calcium and phosphorus ions than the Alg-Gel scaffold. CONCLUSIONS: These findings suggest that compared with the Alg-Gel scaffold, 3D-printed Alg-Gel is more suitable for the growth of hDPSCs, and the scaffold extracts can better promote cell proliferation and differentiation.

Ph-activated nano-amorphous calcium phosphate-based cement to reduce dental enamel demineralization.

Enamel demineralization is destructive, esthetically compromised, and costly complications for orthodontic patients. Nano-sized amorphous calcium phosphate (NACP) has been explored to address this challenge. The 20% NACP-loaded ortho-cement notably exhibited favorable behavior on reducing demineralization of enamel around brackets in a caries model designed to simulate the carious attack. The 20% NACP-loaded ortho-cement markedly promotes higher calcium and phosphate release at a low pH, and the mineral loss was almost two fold lower and carious lesion depth decreased the by 1/3. This novel approach is promising co-adjuvant route for prevention of dental caries dissemination in millions of patients under orthodontic treatment.

Bone tissue engineering via nanostructured calcium phosphate biomaterials and stem cells.

Tissue engineering is promising to meet the increasing need for bone regeneration. Nanostructured calcium phosphate (CaP) biomaterials/scaffolds are of special interest as they share chemical/crystallographic similarities to inorganic components of bone. Three applications of nano-CaP are discussed in this review: nanostructured calcium phosphate cement (CPC); nano-CaP composites; and nano-CaP coatings. The interactions between stem cells and nano-CaP are highlighted, including cell attachment, orientation/morphology, differentiation and in vivo bone regeneration. Several trends can be seen: (i) nano-CaP biomaterials support stem cell attachment/proliferation and induce osteogenic differentiation, in some cases even without osteogenic supplements; (ii) the influence of nano-CaP surface patterns on cell alignment is not prominent due to non-uniform distribution of nano-crystals; (iii) nano-CaP can achieve better bone regeneration than conventional CaP biomaterials; (iv) combining stem cells with nano-CaP accelerates bone regeneration, the effect of which can be further enhanced by growth factors; and (v) cell microencapsulation in nano-CaP scaffolds is promising for bone tissue engineering. These understandings would help researchers to further uncover the underlying mechanisms and interactions in nano-CaP stem cell constructs in vitro and in vivo, tailor nano-CaP composite construct design and stem cell type selection to enhance cell function and bone regeneration, and translate laboratory findings to clinical treatments.

Novel calcium phosphate nanocomposite with caries-inhibition in a human in situ model.

OBJECTIVES: Secondary caries at the restoration margins remains the main reason for failure. Although calcium phosphate (CaP) composites are promising for caries inhibition, there has been no report of CaP composite to inhibit caries in situ. The objectives of this study were to investigate the caries-inhibition effect of nanocomposite containing nanoparticles of amorphous calcium phosphate (NACP) in a human in situ model for the first time, and to determine colony-forming units (CFU) and Ca and P ion concentrations of biofilms on the composite restorations. METHODS: NACP with a mean particle size of 116 nm were synthesized via a spray-drying technique. Two composites were fabricated: NACP nanocomposite, and control composite filled with glass particles. Twenty-five volunteers wore palatal devices containing bovine enamel slabs with cavities restored with NACP or control composite. After 14 days, the adherent biofilms were collected for analyses. Transverse microradiography determined the enamel mineral profiles at the margins, and the enamel mineral loss ΔZ was measured. RESULTS: NACP nanocomposite released Ca and P ions and the release significantly increased at cariogenic low pH (p<0.05). Biofilms on NACP nanocomposite contained higher Ca (p=0.007) and P ions (p=0.005) than those of control (n=25). There was no significant difference in biofilm CFU between the two composites (p>0.1). Microradiographs showed typical subsurface lesions in enamel next to control composite, but much less lesion around NACP nanocomposite. Enamel mineral loss ΔZ (mean±sd; n=25) around NACP nanocomposite was 13.8±9.3 µm, much less than 33.5±19.0 µm of the control (p=0.001). SIGNIFICANCE: Novel NACP nanocomposite substantially reduced caries formation in a human in situ model for the first time. Enamel mineral loss at the margins around NACP nanocomposite was less than half of the mineral loss around control composite. Therefore, the Ca and P ion-releasing NACP nanocomposite is promising for caries-inhibiting restorations.

Strength and fluoride release characteristics of a calcium fluoride based dental nanocomposite.

Secondary caries and restoration fracture remain the two most common problems in restorative dentistry. Release of fluoride ions (F) could be a substantial benefit because F could enrich neighboring enamel or dentin to combat caries. The objective of this study was to incorporate novel CaF(2) nanoparticles into dental resin to develop stress-bearing, F-releasing nanocomposite. CaF(2) nanoparticles, prepared in our laboratories for the first time, were combined with reinforcing whisker fillers in a resin. Flexural strength (mean+/-sd; n=6) was 110+/-11 MPa for the composite containing 30% CaF(2) and 35% whiskers by mass. It matched the 108+/-19 MPa of a stress-bearing, non-releasing commercial composite (Tukey's at 0.05). The composite containing 20% CaF(2) had a cumulative F release of 2.34+/-0.26 mmol/L at 10 weeks. The initial F release rate was 2 microg/(hcm(2)), and the sustained release rate after 10 weeks was 0.29 microg/(hcm(2)). These values exceeded the reported releases of traditional and resin-modified glass ionomer materials. In summary, nanocomposites were developed with relatively high strength as well as sustained release of fluoride ions, a combination not available in current materials. These strong and F-releasing composites may yield restorations that can reduce the occurrence of both secondary caries and restoration fracture.