The influence of residual pectin composition and content on nanocellulose films from ramie fibers: Micro-nano structure and physical properties.

In this study, cellulose nanofibril (CNF) films from ramie fibers were prepared with different pectin compositions and contents, and the influence of residual pectin on the overall performances of CNF films was evaluated. There was no significant effect of the residual pectin composition on the properties of obtained CNF films. However, when the content of residual pectin was increased from 0.45 % to 9.16 %, the surface area and water absorption of CNF films were increased from 0.2223 to 0.3300 m2/g, and from 93.51 % to 122.42 %, respectively. Pectin covers the CNF surface and act as a physical barrier between the cellulose fibrils; thus the nanocellulose films with high pectin content will have a loose and porous structure, resulting in a high surface area and a high water absorption. Besides, with the residual pectin content decreasing from 9.16 % to 0.45 %, the UVA light transmittance and tensile strength of CNF films were increased from 30.6 % to 59.9 %, and from 37.67 to 100.26 MPa, respectively. After removal of amorphous pectins in CNFs, the low pectin containing CNFs are able to pack more compactly to form a strong and thin film. This paper provides guidance for the preparation of CNF films with different performance requirements.

Effects of residual pectin composition and content on the properties of cellulose nanofibrils from ramie fibers.

In this study, a series of pretreatment methods (pectin extraction) were employed to prepare cellulose nanofibrils (CNFs) with different pectin composition and contents from ramie fibers. The comprehensive effects of residual pectin on the final properties of CNFs were investigated. The residual pectin did not have a significant effect on the size distribution of the obtained CNFs. While the presence of pectin led to higher zeta potential value, improved dispersion stability and enhanced storage modulus of the CNF dispersion, with the sodium carbonate extraction method showing the greatest impact. The possible mechanism for enhanced dispersion stability of CNFs is the formation of self-assembled hierarchical pectin-hemicellulose/lignin-cellulose nanostructures, offering abundant electrostatic repulsion and steric hindrance between the nanoparticles. This work provides guidelines for the tailored production of CNFs to meet the requirements for different applications.

Ultrasonic Assisted Extraction of Paclitaxel from Taxus x media Using Ionic Liquids as Adjuvants: Optimization of the Process by Response Surface Methodology.

(1) Background: Ionic liquids (ILs) are considered "green" solvents and have been widely used in the extraction and separation field in recent years; (2) Methods: In this study, some common ILs and functionalized magnetic ionic liquids (MILs) were used as adjuvants for the solvent extraction of paclitaxel from Taxus x media (T. x media) using methanol solution. The extraction conditions of methanol concentration, IL type and amount, solid-liquid ratio, extraction temperature, and ultrasonic irradiation time were investigated in single factor experiments. Then, three factors of IL amount, solid-liquid ratio, and ultrasonic irradiation time were optimized by response surface methodology (RSM); (3) Results: The MIL [C4MIM]FeCl3Br was screened as the optimal adjuvant. Under the optimization conditions of 1.2% IL amount, 1:10.5 solid-liquid ratio, and 30 min ultrasonic irradiation time, the extraction yield reached 0.224 mg/g; and (4) Conclusions: Compared with the conventional solvent extraction, this ultrasonic assisted extraction (UAE) using methanol and MIL as adjuvants can significantly improve the extraction yield, reduce the use of methanol, and shorten the extraction time, which has the potentiality of being used in the extraction of some other important bioactive compounds from natural plant resources.