Encapsulation of lactic acid bacteria in W1/O/W2 emulsions stabilized by mucilage:pectin complexes.

Opuntia silvestri mucilage obtained from dried stems was explored as an emulsifier to prepare double emulsions aiming to encapsulate Lactiplantibacillus plantarum CIDCA 83114. W1/O/W2 emulsions were prepared using a two-step emulsification method. The aqueous phase (W1) consisted of L. plantarum CIDCA 83114, and the oil phase (O) of sunflower oil. The second emulsion was prepared by mixing the internal W1/O emulsion with the W2 phase, consisting of 4 % polysaccharides, formulated with different mucilage:(citric)pectin ratios. Their stability was assessed after preparation (day 0) and during storage at 4 °C (28 days). Determinations included creaming index, color, particle size, viscosity, turbidity, and bacterial viability, along with exposure to simulated gastrointestinal conditions. Significant differences were evaluated by analysis of variance (ANOVA) and Duncan's test (P < 0.05). After 28 days storage, bacterial viability in the W1/O/W2 emulsions was above 6 log CFU/mL for all the pectin:mucilage ratios. Emulsions containing mucilage and pectins showed lower creaming indices after 15 days, remaining stable until the end of the storage period. Formulations including 1:1 pectin:mucilage ratio exhibited the highest bacterial viability under simulated gastrointestinal conditions and were more homogeneous in terms of droplet size distributions at day 0, hinting at a synergistic effect between mucilage components (e.g., proteins, Ca2+) and pectin in stabilizing the emulsions. These results showed that Opuntia silvestri mucilage enhanced the stability of emulsions during refrigerated storage, highlighting its potential for encapsulating lactic acid bacteria. This presents an economical and natural alternative to traditional encapsulating materials.

Preparation and functionalization of cellulose nanofibers using a naturally occurring acid and their application in stabilizing linseed oil/water Pickering emulsions.

Finding efficient and environmental-friendly methods to produce and chemically modify cellulose nanofibers (CNFs) remains a challenge. In this study, lactic acid (LA) treatment followed by microfluidization was employed for the isolation and functionalization of CNFs. Small amounts of HCl (0.01, 0.1, and 0.2 M) were used alongside LA to intensify cellulose hydrolysis. FTIR spectroscopy and solid-state 13C NMR confirmed the successful functionalization of CNFs with lactyl groups during isolation, while SEM, AFM, and rheological tests revealed that the addition of HCl governed the fibers' sizes and morphology. Notably, the treatment with LA and 0.2 M HCl resulted in a more efficient defibrillation, yielding smaller nanofibers sizes (62 nm) as compared to the treatment with LA or HCl alone (90 and 108 nm, respectively). The aqueous suspension of CNFs treated with LA and 0.2 M HCl showed the highest viscosity and storage modulus. LA-modified CNFs were tested as stabilizers for linseed oil/water (50/50 v/v) emulsions. Owing to the lactyl groups grafted on their surface and higher aspect ratio, CNFs produced with 0.1 and 0.2 M HCl led to emulsions with increased stability (a creaming index increase of only 3 % and 1 %, respectively, in 30 days) and smaller droplets sizes of 23.4 ± 1.2 and 35.5 ± 0.5 µm, respectively. The results showed that LA-modified CNFs are promising stabilizers for Pickering emulsions.

Use of olive and sunflower protein hydrolysates for the physical and oxidative stabilization of fish oil-in-water emulsions.

BACKGROUND: Olive and sunflower seeds are by-products generated in large amounts by the plant oil industry. The technological and biological properties of plant-based substrates, especially protein hydrolysates, have increased their use as functional ingredients for food matrices. The present study evaluates the physical and oxidative stabilities of 50 g kg-1 fish oil-in-water emulsions where protein hydrolysates from olive and sunflower seeds were incorporated at 20 g kg-1 protein as natural emulsifiers. The goal was to investigate the effect of protein source (i.e. olive and sunflower seeds), enzyme (i.e. subtilisin and trypsin) and degree of hydrolysis (5%, 8% and 11%) on the ability of the hydrolysate to stabilize the emulsion and retard lipid oxidation over a 7-day storage period. RESULTS: The plant protein hydrolysates displayed different emulsifying and antioxidant capacities when incorporated into the fish oil-in-water emulsions. The hydrolysates with degrees of hydrolysis (DH) of 5%, especially those from sunflower seed meal, provided higher physical stability, regardless of the enzymatic treatment. For example, the average D [2, 3] values for the emulsions containing sunflower subtilisin hydrolysates at DH 5% only slightly increased from 1.21 ± 0.02 µm (day 0) to 2.01 ± 0.04 µm (day 7). Moreover, the emulsions stabilized with sunflower or olive seed hydrolysates at DH 5% were stable against lipid oxidation throughout the storage experiment, with no significant variation in the oxidation indices between days 0 and 4. CONCLUSION: The results of the present study support the use of sunflower seed hydrolysates at DH 5% as natural emulsifiers for fish oil-in-water emulsions, providing both physical and chemical stability against lipid oxidation. © 2024 Society of Chemical Industry.

The role of membrane components on the oleosome lubrication properties.

HYPOTHESIS: Oleosomes are natural oil droplets with a unique phospholipid/protein membrane, abundant in plant seeds, from which they can be extracted and used in emulsion-based materials, such as foods, cosmetics and pharmaceutics. The lubrication properties of such materials are essential, on one hand, due to the importance of the in-mouth creaminess for the consumed products or the importance of spreading the topical creams. Therefore, here, we will evaluate the lubrication properties of oleosomes, and how these properties are affected by the components at the oleosome membrane. EXPERIMENT: Oleosomes were extracted, and their oral lubricating properties were evaluated using tribology. To understand the influence of the oil droplet membrane composition, reconstituted oleosomes were also studied, with membranes that differed in protein/lecithin ratio. Additionally, whey protein- and lecithin-stabilised emulsions were used as reference samples. Confocal laser scattering microscopy was used to study the samples visually before and after tribological analysis. FINDINGS: Oleosomes followed a ball-bearing mechanism, which was probably related to their high physical stability due to the presence of membrane proteins. When the membrane protein concentration at the surface was reduced, the droplet stability weakened, leading to plating-out lubrication. Following our results, we elucidated the oleosome lubrication mechanism and showed their possible control by changing the membrane composition.

Effect of surface acetylation of chitin nanocrystals on the preparation and viscoelasticity of sunflower seed oil-in-water Pickering emulsions.

Acetylated chitin nanocrystals (ChNCs) were used as stabilizer in this work to prepare sunflower seed oil-in-water emulsions for the morphological and rheological studies. The results revealed that the acetylation with moderate degree of substitution (0.38) reduced hydrophilicity and increased surface charge level of rod-like ChNCs, and as a result, significantly improved the emulsifying ability of ChNCs. At the same oil/water ratio and particle loading, the emulsions stabilized with the acetylated ChNCs had far smaller droplet size (∼3 µm) as compared to the emulsions stabilized with the pristine ChNCs (5-7 µm). The increased droplets numbers and improved surface coating level resulted in the enhanced viscous resistance and yield stress level, which improved the physical stability of the acetylated ChNC-stabilized emulsions as a result. In addition, the droplet clusters easily formed in this system, contributing to weak strain overshoot and decreased large-deformation sensitivity during dynamic shear flow. Therefore, the acetylated ChNC-stabilized system showed enhanced transient stress overshoot during startup flow and weakened thixotropy during cyclic ramp shear flow as compared to the pristine ChNC-stabilized system. The relationships between surface acetylation of ChNCs and flow behavior of emulsions were then established, which provide valuable information on the modulation of the ChNC-stabilized Pickering emulsions.

Tunable rheological properties of high internal phase emulsions stabilized by phosphorylated walnut protein/pectin complexes: The effects of pH conditions, mass ratios, and concentrations.

The current study reported high internal phase emulsions (HIPEs) stabilized by phosphorylated walnut protein/pectin complexes (PWPI/Pec) and elucidated how their rheological properties were modulated by pH conditions, mass ratios, and concentrations of the complexes. At pH 3.0, the HIPEs stabilized by PWPI/Pec exhibited smaller oil droplet sizes, as well as higher storage modulus (G') and flow stress, in comparison to those stabilized by the complexes formed at pH 4.0-6.0. These observations can be directly linked to pH-dependent changes in particle size, surface hydrophobicity, and wettability of the PWPI/Pec complexes. Rheological analysis revealed that all generated HIPEs displayed weak strain overshoot behavior, irrespective of pH conditions. Notably, HIPEs stabilized by PWPI/Pec at mass ratios of 2:1 and 4:1 showed enlarged oil droplet sizes, lower G' and flow stress but higher flow strain with unaffected loss factor compared to those stabilized by PWPI/Pec 1:1. However, reducing the concentration of PWPI/Pec led to a simultaneous decrease in G', flow stress, and flow strain, along with a significant increase in the loss factor of the HIPEs. Furthermore, the HIPEs formed with 1% PWPI/Pec 1:1 at pH 3.0 demonstrated excellent stability against heat treatment and long-term storage. These results provide valuable insights into the modulation of rheological characteristics of HIPEs and offer guidance for the application of walnut protein-based stabilizers in HIPE systems.

Improved sustained-release properties of ginger essential oil in a Pickering emulsion system incorporated in sodium alginate film and delayed postharvest senescence of mango fruits.

The insufficient water vapor barrier and mechanical capacity of sodium alginate (SA) film limited its application in fruit preservation. Herein, cellulose nanocrystals (CNCs) were used to stabilize Pickering emulsion. Then, we prepared SA composite films. Ginger essential oil (GEO) was loaded as antimicrobials and antioxidants. Finally, the application on mangos were investigated. Compared to coarse emulsion, Pickering emulsion and its film-formation-solution showed more stable system and larger droplet size. The emulsion significantly changed the properties of SA film. Specifically, CNCs improved the thermal, tensile, and barrier properties of the film and GEO enhanced the ultraviolet-visible light barrier capacity. Additionally, the SA/CNC film possessed a homogeneous micromorphology which had a sustained-release effect on GEO, thus maintaining high postharvest quality and long-term bioavailability for mangos. In conclusion, the film prepared via Pickering emulsion showed satisfactory properties which had great potential in fruit preservation.

Preparation and Characterization of Eugenol Incorporated Pullulan-Gelatin Based Edible Film of Pickering Emulsion and Its Application in Chilled Beef Preservation.

The purpose of this study was to develop a composite film composed of eugenol Pickering emulsion and pullulan-gelatin, and to evaluate its preservation effect on chilled beef. The prepared composite film was comprehensively evaluated in terms of the stability of emulsion, the physical properties of the film, and an analysis of freshness preservation for chilled beef. The emulsion size (296.0 ± 10.2 nm), polydispersity index (0.457 ± 0.039), and potential (20.1 ± 0.9 mV) proved the success of emulsion. At the same time, the films displayed good mechanical and barrier properties. The index of beef preservation also indicated that eugenol was a better active ingredient than clove essence oil, which led to the rise of potential of hydrogen, chroma and water content, and effectively inhibited microbial propagation, protein degradation and lipid oxidation. These results suggest that the prepared composites can be used as promising materials for chilled beef preservation.

Emulsification Properties of Garlic Aqueous Extract: Effect of Heat Treatment and pH Modification.

Despite the broad research available in the literature dealing with garlic health benefits, little information is found regarding the functional properties of garlic components. The aim of this study was to evaluate the emulsification properties of garlic water-soluble compounds (GWSC), encompassing proteins, saponins, and carbohydrates, after heat treatment (10 min at 95 °C) or pH adjustments (2.5, 3.5, and 7.8). After the various treatments, the extracts were used as such or filtrated (0.45 µm), and 10% soybean oil-in-water emulsions were prepared using low (0.48%) or high (6.55% wt/wt) extract concentrations. Results showed that whereas at low GWSC concentrations, both heating and acidifying resulted in the formation of bigger oil droplet sizes (i.e., from d32 = 0.36 µm using unmodified extract to d32 = 7-22 µm at pH 2.5 with or without extract filtration), the effects were opposite at the highest GWSC concentration. In the latter, heat treatment clearly reduced the droplet size as observed from the micrographs as well as the degree of creaming, though the occurrence of depletion and/or bridging flocculation was still strong. The acidification of the extract at this high GWSC concentration significantly reduced the droplet size, as observed from the micrographs; however, a strong flocculation was observed. Removal of protein aggregates, and possibly also saponin micelles, from the extract resulted in an obvious increase in emulsion droplet size. This research brings valuable insights on this study and utilisation of novel natural food emulsifiers from plant sources.

A Novel Demulsifier with Strong Hydrogen Bonding for Effective Breaking of Water-in-Heavy Oil Emulsions.

In the heavy petroleum industry, the development of efficient demulsifiers for the effective breaking of interfacially active asphaltenes (IAA)-stabilized water-in-heavy oil (W/HO) emulsions is a highly attractive but challenging goal. Herein, a novel nitrogen and oxygen containing demulsifier (JXGZ) with strong hydrogen bonding has been successfully synthesized through combining esterification, polymerization and amidation. Bottle tests indicated that JXGZ is effectual in quickly demulsifying the IAA-stabilized W/HO emulsions; complete dehydration (100%) to the emulsions could be achieved in 4 min at 55 °C using 400 ppm of JXGZ. In addition, the effects of demulsifier concentration, temperature and time on the demulsification performance of JXGZ are systematically analyzed. Demulsification mechanisms reveal that the excellent demulsification performance of JXGZ is attributed to the strong hydrogen bonding between JXGZ and water molecules (dual swords synergistic effect under hydrogen bond reconstruction). The interaction of the "dual swords synergistic effect" generated by two types of hydrogen bonds can quickly break the non-covalent interaction force (π-π stacking, Van der Waals force, hydrogen bonds) of IAA at the heavy oil-water interface, quickly promote the aggregation and coalescence of water molecules and finally achieve the demulsification of W/HO emulsions. These findings indicate that the JXGZ demulsifier shows engineering application prospects in the demulsification of heavy oil-water emulsions, and this work provides the key information for developing more efficient chemical demulsifiers suitable for large-scale industrial applications.

Effect of SMOF lipid emulsion on physical growth and extrauterine growth retardation in very preterm infants: Insights from a multicenter retrospective cohort study.

OBJECTIVE: The aim of this study was to investigate the effects of soybean, medium-chain triacylglycerols (MCTs), olive oil, and fish oil (SMOF) on short-term clinical outcomes, physical growth, and extrauterine growth retardation (EUGR) in very preterm infants. METHODS: This was a multicenter retrospective cohort study of very preterm infants hospitalized in neonatal intensive care units at five tertiary hospitals in China between January 2021 and December 2021. According to the type of fat emulsion used in parenteral nutrition (PN), eligible very preterm infants were divided into the MCTs/long-chain triacylglycerol (MCT/LCT) group and SMOF group. Change in weight z-score (weight Δz) between measurements at birth and at 36 wk of postmenstrual age or at discharge, the incidence of EUGR, and short-term clinical outcomes between the two groups were compared and analyzed. RESULTS: We enrolled 409 very preterm infants, including 205 in the MCT/LCT group and 204 in the SMOF group. Univariate analysis showed that infants in the SMOF group had significantly longer duration of invasive mechanical ventilation and PN, longer days to reach total enteral nutrition, and a higher proportion of maximum weight loss than those in MCT/LCT group (all P < 0.05). After adjusting for the confounding variables, multifactorial logistic regression analysis of short-term clinical outcomes showed that SMOF had protective effects on PN-associated cholestasis (odds ratio [OR], 0.470; 95% confidence interval [CI], 0.266-0.831) and metabolic bone disease of prematurity (OR, 0.263; 95% CI, 0.078-0.880). Additionally, SMOF was an independent risk factor for lower weight growth velocity (ß = -0.733; 95% CI, -1.452 to -0.015) but had no effect on the incidence of EUGR (OR, 1.567; 95% CI, 0.912 to -2.693). CONCLUSION: Compared with MCT/LCT, SMOF can reduce the risk for PN-associated cholestasis and metabolic bone disease of prematurity in very preterm infants and has a negative effect on growth velocity but has no effect on the incidence of EUGR.

Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress.

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

Effect of reduced versus usual lipid emulsion dosing on bilirubin neurotoxicity and neurodevelopmental impairment in extremely preterm infants: study protocol for a randomized controlled trial.

BACKGROUND: Bilirubin neurotoxicity (BN) occurs in premature infants at lower total serum bilirubin levels than term infants and causes neurodevelopmental impairment. Usual dose lipid infusions in preterm infants may increase free fatty acids sufficiently to cause bilirubin displacement from albumin, increasing passage of unbound bilirubin (UB) into the brain leading to BN and neurodevelopmental impairment not reliably identifiable in infancy. These risks may be influenced by whether cycled or continuous phototherapy is used to control bilirubin levels. OBJECTIVE: To assess differences in wave V latency measured by brainstem auditory evoked responses (BAER) at 34-36 weeks gestational age in infants born ≤ 750 g or < 27 weeks' gestational age randomized to receive usual or reduced dose lipid emulsion (half of the usual dose) irrespective of whether cycled or continuous phototherapy is administered. METHODS: Pilot factorial randomized controlled trial (RCT) of lipid dosing (usual and reduced) with treatment groups balanced between cycled or continuous phototherapy assignment. Eligible infants are born at ≤ 750 g or < 27 weeks' gestational age enrolled in the NICHD Neonatal Research Network RCT of cycled or continuous phototherapy. Infants will randomize 1:1 to reduced or usual dose lipid assignment during the first 2 weeks after birth and stratified by phototherapy assignment. Free fatty acids and UB will be measured daily using a novel probe. BAER testing will be performed at 34-36 weeks postmenstrual age or prior to discharge. Blinded neurodevelopmental assessments will be performed at 22-26 months. Intention-to-treat analyses will be performed with generalized linear mixed models with lipid dose and phototherapy assignments as random effects covariates, and assessment for interactions. Bayesian analyses will be performed as a secondary analysis. DISCUSSION: Pragmatic trials are needed to evaluate whether lipid emulsion dosing modifies the effect of phototherapy on BN. This factorial design presents a unique opportunity to evaluate both therapies and their interaction. This study aims to address basic controversial questions about the relationships between lipid administration, free fatty acids, UB, and BN. Findings suggesting a reduced lipid dose can diminish the risk of BN would support the need for a large multicenter RCT of reduced versus usual lipid dosing. TRIAL REGISTRATION: Clinical Trials.gov, NCT04584983, Registered 14 October 2020, https://clinicaltrials.gov/ct2/show/NCT04584983 Protocol version: Version 3.2 (10/5/2022).

Composite lipid emulsion use and essential fatty acid deficiency in pediatric patients with intestinal failure with high parenteral nutrition dependence: A retrospective cohort study.

BACKGROUND: Reports of essential fatty acid deficiency (EFAD) in patients receiving parenteral nutrition (PN) and a composite lipid (mixed oil intravenous lipid emulsion [MO ILE]) are predominantly when managed by lipid restriction. The objective of this study was to determine the prevalence of EFAD in patients with intestinal failure (IF) who are PN dependent without lipid restriction. METHODS: We retrospectively evaluated patients, ages 0-17 years, followed by our intestinal rehabilitation program between November 2020 and June 2021 with PN dependency index (PNDI) of >80% on a MO ILE. Demographic data, PN composition, PN days, growth, and plasma fatty acid profile were collected. A plasma triene-tetraene (T:T) ratio >0.2 indicated EFAD. Summary statistics and Wilcoxon rank sum test evaluated to compare between PNDI category and ILE administration (grams/kilograms/day). P < 0.05 was considered significant. RESULTS: Twenty-six patients (median age, 4.1 years [interquartile range (IQR) = 2.4-9.6]) were included. The median duration of PN was 1367 days (IQR = 824-3195). Sixteen patients had a PNDI of 80%-120% (61.5%). Fat intake for the group was 1.7 g/kg/day (IQR = 1.3-2.0). The median T:T ratio was 0.1 (IQR = 0.1-0.2) with no values >0.2. Linoleic and arachidonic acid were low in 85% and 19% of patients, respectively; however, Mead acid was normal in all patients. CONCLUSION: This report is the largest to date on the EFA status of patients with IF on PN. These results suggest that, in the absence of lipid restriction, EFAD is not a concern when using MO ILEs in children receiving PN for IF.

Stable encapsulation of camellia oil in core-shell zein nanofibers fabricated by emulsion electrospinning.

This study aimed to develop core-shell nanofibers by emulsion electrospinning using zein-stabilized emulsions to encapsulate camellia oil effectively. The increasing oil volume fraction (φ from 10% to 60%) increased the apparent viscosity and average droplet size of emulsions, resulting in the average diameter of electrospun fibers increasing from 124.5 nm to 286.2 nm. The oil droplets as the core were randomly distributed in fibers in the form of beads, and the core-shell structure of fibers was observed in TEM images. FTIR indicated that hydrogen bond interactions occurred between zein and camellia oil molecules. The increasing oil volume fraction enhanced the thermal stability, hydrophobicity, and water stability of electrospun nanofiber films. The core-shell nanofibers with 10%, 20%, 40%, and 60% camellia oil showed encapsulation efficiency of 78.53%, 80.25%, 84.52%, and 84.39%, respectively, and had good storage stability. These findings contribute to developing zein-based core-shell electrospun fibers to encapsulate bioactive substances.

Advances in emulsion-based delivery systems for nutraceuticals: Utilization of interfacial engineering approaches to control bioavailability.

Designing functional foods fortified with nutraceuticals is an important focus of modern food science with the aim of improving human health and wellbeing. However, many nutraceuticals have a low water solubility and poor physiochemical stability, which makes it challenging to incorporate into food matrices. Moreover, nutraceuticals may also have a low bioavailability after oral administration because they can either precipitate or chemically degrade, and/or might not be absorbed in the gastrointestinal tract. Numerous strategies have been developed and applied to encapsulate and deliver nutraceuticals. Emulsions are a kind of colloid delivery system where one phase is dispersed into another immiscible phase in the form of small droplets. These droplets have been widely used as carriers to improve the dispersibility, stability, and absorption of nutraceuticals. Many factors affect the formation and stability of emulsions, with the interfacial coating formed around the droplets by emulsifiers and other stabilizers being one of the most important. Hence, interfacial engineering principles are needed for the design and development of emulsions. Different approaches to interfacial engineering have been developed, which can help to modulate the dispersibility, stability, and bioavailability of nutraceuticals. This chapter summarizes recent research in developing interfacial engineering approaches and their impacts on the bioavailability of nutraceuticals.

The effect of vegetable oil pre-emulsified with whey protein and pectin on physicochemical properties and microstructure of low-fat yogurt.

The effects of whey protein isolate (WPI)-pectin pre-emulsified vegetable oil on the physicochemical properties and microstructure of low-fat yogurt (LFY) were investigated by particle size distribution, water-holding capacity (WHC), texture, rheology, electron microscopy, storage stability, and sensory analysis. The vegetable oil was pre-emulsified into two types of emulsions, a mixed emulsion (ME: WPI-pectin complexes were adsorbed directly at the interface) and a bilayer emulsion (BE: Pectin was added to a previously established WPI-stabilized interface). The results showed that yogurts added with pre-emulsified vegetable oil (ME-Y, BE-Y) had significantly better quality than LFY, with better WHC, textural properties, rheological properties, and storage stability. The average particle size of ME (11.96 µm) was larger than that of BE (10.23 µm). The consistency of yogurt added with ME (ME-Y) was significantly higher than that of yogurt added with BE (BE-Y), at 2359.10 and 2181.12 g s, respectively. Meanwhile, ME-Y exhibited storage stability similar to full-fat control (FFY) and higher sensory scores. Interestingly, the WHC of BE-Y (49.03%) was higher than that of ME-Y (45.63%). In addition, WPI + Pectin-Y exhibited higher WHC (53.81%) and consistency (2518.73 g s) compared to ME-Y and BE-Y, but the particle size distribution was not uniform, and the direct addition of WPI, pectin, and oil had no positive effect on improving the rheological properties of yogurt. Overall, the addition of WPI-pectin pre-emulsified vegetable oil improved the quality of LFY. These findings are particularly relevant for the production of higher quality LFY.

Brewer's Spent Yeast Cell Wall Polysaccharides as Vegan and Clean Label Additives for Mayonnaise Formulation.

Brewer's spent yeast (BSY) mannoproteins have been reported to possess thickening and emulsifying properties. The commercial interest in yeast mannoproteins might be boosted considering the consolidation of their properties supported by structure/function relationships. This work aimed to attest the use of extracted BSY mannoproteins as a clean label and vegan source of ingredients for the replacement of food additives and protein from animal sources. To achieve this, structure/function relationships were performed by isolating polysaccharides with distinct structural features from BSY, either by using alkaline extraction (mild treatment) or subcritical water extraction (SWE) using microwave technology (hard treatment), and assessment of their emulsifying properties. Alkaline extractions solubilized mostly highly branched mannoproteins (N-linked type; 75%) and glycogen (25%), while SWE solubilized mannoproteins with short mannan chains (O-linked type; 55%) and (1→4)- and (ß1→3)-linked glucans, 33 and 12%, respectively. Extracts with high protein content yielded the most stable emulsions obtained by hand shaking, while the extracts composed of short chain mannans and ß-glucans yielded the best emulsions by using ultraturrax stirring. ß-Glucans and O-linked mannoproteins were found to contribute to emulsion stability by preventing Ostwald ripening. When applied in mayonnaise model emulsions, BSY extracts presented higher stability and yet similar texture properties as the reference emulsifiers. When used in a mayonnaise formulation, the BSY extracts were also able to replace egg yolk and modified starch (E1422) at 1/3 of their concentration. This shows that BSY alkali soluble mannoproteins and subcritical water extracted ß-glucans can be used as replacers of animal protein and additives in sauces.

Fabrication of Pickering emulsions stabilized by citrus pectin modified with ß-cyclodextrin and its application in 3D printing.

Pickering emulsions stabilized by polysaccharide particles have received increasing attention because of their potential applications in three-dimensional (3D) printing. In this study, the citrus pectins (citrus tachibana, shaddock, lemon, orange) modified with ß-cyclodextrin (ß-CD) were used to stabilize Pickering emulsions reaching the requirements of 3D printing. In terms of pectin chemical structure, the steric hindrance provided by the RG I regions was more conducive to the stability of the complex particles. The modification of pectin by ß-CD provided the complexes a better double wettability (91.14 ± 0.14°-109.43 ± 0.22°) and a more negative ζ-potential, which was more beneficial for complexes to anchor at oil-water interface. In addition, the rheological properties, texture properties and stability of the emulsions were more responsive to the ratios of pectin/ß-CD (Rß/C). The results showed that the emulsions stabilized at a φ = 65 % and a Rß/C = 2:2 achieved the requirements (shear thinning behavior, self-supporting ability, and stability) of 3D printing. Furthermore, the application in 3D printing demonstrated that the emulsions under the optimal condition (φ = 65 % and Rß/C = 2:2) displayed excellent printing appearance, especially for the emulsions stabilized by ß-CD/LP particles. This study provides a basis for the selection of polysaccharide-based particles to prepare 3D printing inks which may be utilized in food manufacturing.

Capsaicin encapsulated in W/O/W double emulsions fabricated via ethanol-induced pectin gelling: Improvement of bioaccessibility and reduction of irritation.

Capsaicin is a water-insoluble bioactive component with several beneficial physiological functions. However, the widespread application of this hydrophobic phytochemical is limited by its low water-solubility, intense irritation, and poor bioaccessibility. These challenges can be overcome by entrapping capsaicin within the internal water phase of water-in-oil-in-water (W/O/W) double emulsions via using ethanol to induce pectin gelling. In this study, ethanol was used both to dissolve capsaicin and to promote pectin gelation, thereby forming capsaicin-loaded pectin hydrogels that were used as the internal water phase of the double emulsions. Pectin addition improved the physical stability of the emulsions and led to a high encapsulation efficiency of capsaicin (>70 % after 7d storage). After simulated oral and gastric digestion, capsaicin-loaded double emulsions maintained their compartmentalized structure, avoiding capsaicin leakage in the month and stomach. The double emulsions were digested in the small intestine, thereby releasing the capsaicin. Capsaicin bioaccessibility was significantly enhanced after encapsulation, which was attributed to mixed micelle formation by the digested lipid phase. Furthermore, encapsulation of capsaicin within the double emulsions reduced the irritation in the gastrointestinal tissues of mice. This kind of double emulsion may have great potential for the development of more palatable capsaicin-loaded functional food products.