Nutritional factors affecting camel (Camelus dromedarius) milk composition.

Saharan population in Algeria still depending on bovine milk, which suffers from serious constraints undermining its sustainability. Camelus dromedarius milk has experienced growing demand following the emerging market requirements for livestock production and dairy farming over the past decade. The present work aimed at analysing the effect of nutritional regime on milk quality. The differences in pH, Acidity D°, Ash and Fats were significant. The pH was negatively influenced by the intensification conditions such as the much higher use of concentrates. The major constituents of milk were strongly and positively correlated with barley, wheat bran, TN/Kg.DM (Total Nitrogen/ Kg. Dry Matter), Kg.DM, Concentrates and daily watering. The results showed that a good energy-protein balance around 73 g PDI/UFL (Protein Digestible in the Intestine/Energetic Forage Unit for milk production) was beneficial for a better milk protein ratio. The use of corn, soybeans, palm dates and VM-premix (Vitamin Mineral) supplementation were also favourable to the synthesis of fats. Crude fiber and cell walls were better valued in the synthesis of fats with the availability of concentrates and the increasing of TN /Kg.DM and VM-premix rate in dietary regime. The vitamin C content elevate following high ratio of UFL /Kg.DM and PDI/UFL. For thus, the influence of nutritional status can lead to major improvements that need also more advanced and detailed studies.

Batch and continuous enzymatic interesterification of beef tallow: Interesterification degree, reaction relationship, and physicochemical properties.

The relationship between batch and continuous enzymatic interesterification was studied through enzymatic interesterification of beef tallow. The interesterification degree (ID) during the batch reaction was monitored based on triacylglycerol composition, sn-2 fatty acid composition, solid fat content, and melting profile and was described by an exponential model. A relationship equation featuring reaction parameters of the two reations was established to predict the ID and physicochemical characteristics in continuous interesterification. The prediction of the ID based on triacylglycerol composition was reliable, with an R2 value greater than 0.85. Interesterification produced more high-melting-point components for both reactions, but the acyl migration in the batch-stirring reactor was much greater, resulting in faster crystallization, a more delicate crystal network, and lower hardness. The relationship equation can be employed to predict the ID, but the prediction of physicochemical properties was constrained by the difference in acyl migration degree between the two reactions.

Coconut oil as an alternative to butter and shortening in bread making.

The characteristics of bread prepared with coconut oil were investigated to determine whether it can be used as an alternative to butter and shortening. Loaf height of the bread increased by adding butter and shortening water content of bread containing oils and fats was lower than that without oils and fats, and baking loss increased with decreasing water content. The addition of oils and fats influenced the baking color of bread and hindered the hardening of bread samples over time. Moreover, the addition and type of oils and fats influenced the crust density of bread samples and dough expansion. Furthermore, numerous fine bubbles were present in bread samples without oils and fats, whereas the size and number of bubbles increased and decreased in bread samples containing oils and fats, respectively. The band concentrations of insoluble proteins at approximately 39, 41, and 48 kDa in freeze-dried bread samples without oils and fats were significantly lower than those containing oils and fats. Thirty volatile compounds were detected in all bread samples tested, and the number was high in the following order: bread samples with butter, shortening, and coconut oil, and without oils and fats. However, sensory evaluation showed no significant differences among all bread samples tested. Therefore, it was suggested that bread containing coconut oil had the same characteristics as that containing butter and shortening. PRACTICAL APPLICATION: Butter and shortening are usually used in bread making, although bread prepared with coconut oil can possess the same characteristics as that containing them. Therefore, this study evaluated the characteristics of bread prepared with coconut oil and revealed that use of coconut oil enabled a vegan bread with reduced environmental impact because coconut oil is a vegetable-derived oil that does not require the cutting of tropical rainforests.

Thermophysical properties of blends composed of Amazonian fats and soybean oil.

Thermophysical properties of blends composed of soybean oil and fats obtained from fruits and seeds from Brazilian Amazonian region (Murumuru, Tucuma, and Bacuri) were investigated, looking for more sustainable alternatives to the mostly used industrial fats, for applications in product formulation. Fatty acid (FA) and triacylglycerol composition, nutritional indexes, solid fat content (SFC), compatibility, consistency, melting, and crystallization profiles were determined. Soybean oil increased blends' unsaturated FA profile, leading to lower SFC, but higher nutritional quality. Fats' melting profiles were significantly altered with soybean oil addition: temperatures decreased with the increase in oil content. Iso-solids diagrams showed that lipids were compatible, which is a technological advantage. SFC and consistency profiles suggested that tucuma and murumuru fats could be used as hardstocks for lipid products, and bacuri fat could be applied in products such as margarine and spreads. Blends could improve fats' spreadability and other technological properties, which is promising for applications in products formulation.

Mechanisms of interesterified fat digestibility in a muffin matrix using a dynamic gastric model.

Industrially generated trans-fats have been linked with cardiovascular disease (CVD) and have thus been replaced by interesterified (IE) fats, in foods. Interesterification rearranges fatty acids on the glycerol backbone of a triacylglycerol molecule. However, the impact of IE fat on health is unknown. We recently reported differences in lipid absorption kinetics between IE and rapeseed oil (RO). Here, we investigated the mechanisms underpinning IE fat digestion kinetics in the same muffins baked using an IE fat, non-IE fat [with the same fatty acid composition] and rapeseed oil (RO) under simulated conditions. IE and non-IE fats were largely solid in the gastric phase and strongly associated within the muffin matrix, whereas RO formed liquid droplets which separated from the matrix. No significant difference in lipolysis rates was detected between IE and non-IE fats. The lipolysis of the RO fat was slower, due to long-chain PUFAs. Interesterification itself did not affect digestibility, but the strong interaction between the hard fats and the muffin matrix resulted in extensive creaming of the matrix in the stomach, leading to delayed gastric emptying compared to the RO sample. The rate and extent of lipolysis were determined by the amount of fat available and the structure of the fat. This demonstrates the importance of the physical behaviour of the fats during digestion and provides a mechanistic understanding of the overall lipid digestion of IE fats, which relates to their physiological response.

Sensory Features of Partially Hydrogenated Oil and Their Connection with Melting and Crystalline Characteristics.

Although partially hydrogenated oil (PHO) provides foods with outstanding thick tastes and pronounced "creamy" flavor, the high level of artificial trans-fatty acids (TFA; about 30%) limits its usages around the world in the near future. It is necessary to produce trans-free alternatives with similar tastes to PHO. The relationship between sensory attributes and physicochemical characteristics of PHO and four typical specialty fats were therefore analyzed in the present study. PHO exhibited the highest greasiness score (8.19), accompanying by mild creaminess and aftertaste as well as a weak coolness during swallow, which were resulted from the close-packed arrangements of TFA, its cis-counterparts and other long chain fatty acids. None of artificial trans-fats, mainly anhydrous milk fat, cocoa butter, and coconut oil and its fully hydrogenated counterpart, were similar to PHO in terms of these sensory attributes. The unique fatty acid species of PHO and their arrangements contributed to the relatively smooth solid fat content profile and melting-crystallization curve, as well as forming uniform and dense ß' crystal-structures (Db=1.80). The Pearson correlation analyses relevelled that long chain fatty acids, e.g., t-C18:1 and C18:1, and melting final temperatures were generally positive correlated with greasiness, creaminess and aftertaste; whereas these indices were negatively correlated with coolness. The melting enthalpy was highly connected with coolness, which reflected the endothermic effectiveness during the melting process of fats in the mouth. These indices screened by correlation analyses that were strongly correlated with sensory attributes could provide references for producing trans-free alternatives.

Solvent-Free Enzymatic Synthesis of Dietary Triacylglycerols from Cottonseed Oil in a Fluidized Bed Reactor.

The synthesis of structured lipids with nutraceutical applications, such as medium-long-medium (MLM) triacylglycerols, via modification of oils and fats represents a challenge for the food industry. This study aimed to synthesize MLM-type dietary triacylglycerols by enzymatic acidolysis of cottonseed oil and capric acid (C10) catalyzed by Lipozyme RM IM (lipase from Rhizomucor miehei) in a fluidized bed reactor (FBR). After chemical characterization of the feedstock and hydrodynamic characterization of the reactor, a 22 central composite rotatable design was used to optimize capric acid incorporation. The independent variables were cycle number (20-70) and cottonseed oil/capric acid molar ratio (1:2-1:4). The temperature was set at 45 °C. The best conditions, namely a 1:4 oil/acid molar ratio and 80 cycles (17.34 h), provided a degree of incorporation of about 40 mol%, as shown by compositional analysis of the modified oil. Lipozyme RM IM showed good operational stability (kd = 2.72 × 10-4 h-1, t1/2 = 2545.78 h), confirming the good reuse capacity of the enzyme in the acidolysis of cottonseed oil with capric acid. It is concluded that an FBR configuration is a promising alternative for the enzymatic synthesis of MLM triacylglycerols.

Insight into the medium-long-medium structured lipids made from Camellia oil: Composition-structure relationship.

Medium-long-medium (MLM) structured lipid (SL) as a new SL is a potential functional ingredient in food and nutraceutical products, but its composition-structure-physicochemical properties relationship has not been revealed in food industry. MLM type of medium-long chain triacylglycerol (MLCT) was synthesized from Camellia oil by combi-lipase; its physicochemical properties and composition-structure relationship were investigated in this research. The higher MLCT (67.24% ± 0.09) and MLM (52.71% ± 0.53) productivities were achieved after parameter optimization. The physicochemical characterization of SLs exhibited mild thermal property, intermediate Fourier transform infrared spectroscopy absorption intensity, and better crystal morphology. Joint characterizations identified that MLM and long-medium-long type SL were rich in 1,3-dioctanoyl-2-linoleoyl glyceride (CaLCa), 1,3-dioctanoyl-2-oleoyl glyceride (CaOCa), 1,3-dilinoleoyl-2-octanoyl glyceride (LCaL), and 1,3-dilinoleoyl-2-decanoyl glyceride (LCL) components, respectively. This is ascribed to the higher proportion of caprylic and linoleic acid in 1,3-specific enzyme. The 3D structural analysis further demonstrated that the CaLCa, CaOCa, LCaL, and LCL molecules had lower steric energy to form symmetrical structure at 1,3-position. This research provides a practical method to produce MLM-type SL from edible oils and fats in food industry.

Effects of monensin supplementation on lactation performance of dairy cows: a systematic review and dose-response meta­analysis.

The aim of this study was to conduct a comprehensive review with meta-analysis to determine the effects of the dose-response relationship between monensin supplementation and dairy cow performance and milk composition. Results from 566 full-text articles and 48 articles with 52 studies were meta-analyzed for pooled estimates. Monensin supplementation up to 23 ppm increased milk production, with the optimal dose being 12.6 ppm. Monensin supplementation at doses ranging from 16 to 96 ppm increased milk production in the prepartum phase (- 28 to 0 day relative to calving). From 60 to 150 DIM, monensin supplementation up to 21 ppm had a significant positive effect on this outcome, while supplementation in the 37 to 96 ppm range caused a decrease in this variable. At 0 to 60 and > 150 DIM, monensin supplementation had no effect on milk yield. At dosages of 22 to 96 ppm, 12 to 36 ppm, and below 58 ppm and 35 ppm, respectively, monensin supplementation resulted in significant decreases in dry matter intake (DMI), milk protein percentage, milk fat percentage, and milk fat yield. Overall, based on the results of this meta-analysis and considering all variables, the recommended optimal dose of monensin could be about 16 ppm.

Enzymatic Interesterification of Vegetable Oil:A Review on Physicochemical and Functional Properties, and Its Health Effects.

In recent years, scientists and technologists have become increasingly interested in producing modified lipids with enhanced nutritional and functional properties. The application and functional properties of fats and oil depend on the composition and structure of triacylglycerols (TAG). As a result, lipid TAG changes can be used to synthesize tailored lipids with a broader range of applications. However, no natural edible oil is available with appropriate dietary and functional properties to meet the human recommended dietary allowances (RDA). On the other hand, the arising health concern is the transfat consumption produced during the chemical modification of vegetable oil through the partial hydrogenation process. Therefore, innovative technologies are shifting toward modifying fat and oil to improve their functionality. Enzymatic interesterification (EIE) is one of the emerging and novel technology to modify the technological traits of naturally available edible oil. It helps in modifying physicochemical, functional, oxidative, and nutritional characteristics of fats and oil due to the rearrangement of the fatty acid positions in the glycerol backbone after interesterification. Enzymatic interesterification utilizes lipase as a biocatalyst with specificity and selectivity to produce desired lipids. Alternation in the molecular structure of triacylglycerol results in changes in melting/dropping point, thermal properties, crystallization behavior, solid fat content, and oxidative stability. Because of its high acyl exchange reaction efficiency, simple reaction process, flexibility, eco-friendly, and generation of fewer by-products, (EIE) is gaining more attention as a substitute lipid modification approach. This review paper discusses the uses of EIE in developing modified fat with desirable physicochemical and nutritional properties. EIE is one of the potential techniques to modify vegetable oil's physicochemical, functional, and nutritional characteristics without producing any undesirable reaction products. EIE produces different modified lipids such as trans fat-free margarine, plastic fat, bakery, confectionery fat, therapeutic oil, infant food, cocoa butter substitute, and equivalent.

Crystallization behavior and compatibility analysis of beef tallow-based binary/ternary fat mixture systems.

Crystallization behavior and compatibility of fat blend systems are closely related to the stability fat food. The graded binary and ternary blends of beef tallow (BT), palm oil (PO), and soybean oil (SO) were comprehensively analyzed, including lipid composition, phase behavior, crystallization behavior, solid fat content (SFC), and compatibility. It was found that, unlike the monotectic behavior of BT/SO blends, BT/PO blends were dominated by eutectic behavior, while all the binary blends exhibited ß' polymorph. The addition of BT in the binary blends not only increased the liquid phase transition temperature but also played a more important role in the SFC variation at 0-40 °C. The eutectic growth behavior of blends might be that the TAG component of PO grew on the peripheral of BT seed crystals. In addition, BT/PO/SO ternary blends showed good compatibility and ß' polymorph. Our results provide potential formulations for beef tallow-based shortening production.

Assessment of the Nutritional Quality of Plant Lipids Using Atherogenicity and Thrombogenicity Indices.

Dietary lipids derived from plants have different compositions of individual fatty acids (FA), providing different physical and chemical properties with positive or adverse health effects on humans. To evaluate the nutritional value and assess the FA composition of various plants, the atherogenicity (AI) and thrombogenicity (TI) indices were calculated and reviewed for nine different categories of fats and oils. This included common oils, unconventional oils, nut oils originating from temperate regions, Amazonian and tropical fats and oils, chia seed oil, traditional nuts originating from temperate regions, unconventional nuts, seeds, and fruits, and their products. The main factors influencing fatty acid composition in plants are growth location, genotype, and environmental variation, particularly temperature after flowering, humidity, and frequency of rainfall (exceeding cultivar variation). The lowest AI was calculated for rapeseed oil (0.05), whereas the highest value was obtained for tucuman seeds (16.29). Chia seed oil had the lowest TI (0.04), and murumuru butter had the highest (6.69). The differences in FA composition and subsequent changes in the lipid health indices of the investigated fats and oils indicate their importance in the human diet.

Automated workflow utilizing saponification and improved epoxidation for the sensitive determination of mineral oil saturated and aromatic hydrocarbons in edible oils and fats.

Refined edible oils and fats are known to contain olefins resisting the typical epoxidation used for the sample preparation of mineral oil saturated and aromatic hydrocarbons (MOSH and MOAH). These olefins can be misinterpreted as MOAH and are therefore an important reason for inconsistent results between laboratories. Collaborative trials confirm this assumption for low MOAH contents near the quantitation limits regularly. In the scope of this work, a new epoxidation approach was developed. Persistent olefins in refined oils could be successfully epoxidized with performic acid. The reaction kinetics was investigated using model substances for biogenic olefins and MOAH. It was rationalized why certain olefins resist epoxidation and which MOAH can potentially get lost. A prominent peak cluster in the MOAH fraction of refined palm oils could be identified by means of GC-MS and explained why it cannot be epoxidized. Based upon this, an automated and streamlined workflow for sample preparation and analysis was composed tackling major problems identified in previously published methods. Optimized and miniaturized saponification, extraction, epoxidation, and enrichment paired with online LC-GC-FID led to a robust method that was tested and validated for edible oils and fats (RSDR < 7% for MOSH and MOAH at values of 14.9 and 2.1 mg/kg, respectively). Due to increased sample amount and minimized blank values, quantitation limits below 1 mg/kg for MOSH and MOAH were achieved. The trueness of the method was verified by analyzing collaborative trial samples.

Formation mechanisms and mechanical properties of anaerobic lagoon scum.

The formation of a floating scum layer on the liquid surface of covered anaerobic lagoons prevents optimal and efficient lagoon operation. Scum can reduce hydraulic retention time, inhibit biogas capture and cause damage to lagoon covers. Managing the negative impact of scum requires understanding what scum is, how it forms and how it consolidates. This paper presents measurements of the physical and mechanical properties of scum and sludge samples from two covered anaerobic lagoons that alternatively treat municipal and abattoir waste. Both scum samples consisted of a large proportion of suspended solids that sank once the sample was diluted, degassed and mixed, indicating that sludge flotation and buoyancy due to biogas generation is a major contributor to scum accumulation. Total and soluble chemical oxygen demand and volatile solids in the scum are approximately 90 % higher than in sludge, which indicates that scum has a large proportion of undigested solids. Fourier-transform infrared spectroscopy demonstrates that scum and sludge have similar organic matter, with both including fats, oils, greases, proteins, and polysaccharides. Scum formation due to gas buoyancy implies that scum accumulation is inevitable and controlling fats, oils, and greases at the source of the wastewater is not enough to stop scum formation. Scum accumulation increases due to buoyancy, which drives scum compaction and increases the strength of the scum, as demonstrated by the measurement of scum compressional rheology. Scum management techniques that disturb the scum layer early enough to release the entrapped gas enable the scum to sink and get digested, thus minimising the impact of scum formation.

Anaerobic digester microbiome dynamics in response to moderate and failure-inducing shock loads of fats, oils and greases.

Accidental organic overloading (shock loading) is common during the anaerobic co-digestion of fats, oils and greases (FOG) and may lead to decreased performance or reactor failure due to the effects on the microbiome. Here, adapted and non-adapted lab-scale anaerobic digesters were exposed to FOG shocks of varying organic strengths. The microbiome was sequenced during the recovery periods employed between each shock event. Non-failure-inducing shocks resulted in enrichment of fermentative bacteria, and acetoclastic and methylotrophic methanogens. However, sub-dominant bacterial populations were largely responsible for increased biogas production observed after adaptation. Following failure events, early recovery communities were dominated by Pseudomonas and Methanosaeta while late recovery communities shifted toward sub-dominant bacterial taxa and Methanosarcina. Generally, the recovered microbiome structure diverged from that of both the initial and optimized microbiomes. Thus, while non-failure-inducing FOG shocks can be beneficial, the adaptations gained are lost after a failure event and adaptation must begin again.

A novel UHPLC-ESI-MS/MS method and automatic calculation software for regiospecific analysis of triacylglycerols in natural fats and oils.

Regioisomeric analysis of triacylglycerols (TAGs) in natural oils and fats is a highly challenging task in analytical chemistry. Here we present a software (TAG Analyzer) for automatic calculation of regioisomeric composition of TAGs based on the mass spectral data from recently reported ultra-high performance liquid chromatography electrospray ionization tandem mass spectrometry (UHPLC-ESI-MS/MS) method for analyzing TAG regioisomers. The software enables fast and accurate processing of complex product ion spectra containing structurally informative diacylglycerol [M+NH4-RCO2H-NH3]+ and fatty acid ketene [RCO]+ fragment ions. Compared to manual processing, the developed software offers higher throughput with faster calculation as well as more accurate interpretation of chromatographically overlapping isobaric TAGs. The software determines results by constructing a synthetic spectrum to match the measured fragment ion spectrum, and by reporting the optimal concentrations of TAGs used to create the synthetic spectrum. This type of calculation is often extremely challenging for manual interpretation of the fragment ion spectra of isobaric TAGs with shared fragments, hence the need for automated data processing. The developed software was validated by analyzing a wide range of mixtures of regiopure TAG reference compounds of known composition and a commercial olive oil sample. Additionally, the method was also applied for regiospecific analysis of TAGs in human milk as an example of natural fats and oils with a highly complex TAG profile. The results indicate that the software is capable of resolving regioisomeric composition of natural TAGs even of the most complex composition. This novel calculation software combined with our existing UHPLC-ESI-MS/MS method form a highly efficient tool for regioisomeric analysis of TAGs in natural fats and oils.

Partial Replacement of High-Fat Diet with Beef Tallow Attenuates Dyslipidemia and Endoplasmic Reticulum Stress in db/db Mice.

High-fat diet (HFD) consumption is closely associated with an increased risk of metabolic syndromes (MetS), such as obesity, type 2 diabetes, and cardiovascular diseases (CVDs). Therefore, the consumption of alternative and functional fatty acids to replace saturated fatty acids and/or trans-fatty acids with polyunsaturated fatty acids has become an important dietary strategy for the prevention of MetS. Consumption of omega-3 fatty acids (n-3) reduces various physiological complications, including CVDs, nonalcoholic fatty liver disease, and insulin resistance, related to inflammatory responses. In this study, we investigated the partial replacement effects of HFD with beef tallow (BT) on dyslipidemia and endoplasmic reticulum (ER) stress in male db/db mice. The animals were grouped to one of four dietary intervention groups (n = 16 per group): (1) normal diet, (2) HFD, (3) HFD partially replaced with regular beef tallow (HFD+BT1), or (4) HFD partially replaced with beef tallow containing a relatively reduced omega-6 fatty acid (n-6)/n-3 ratio (HFD+BT2) than HFD+BT1. After 6 weeks of dietary intervention, 1 mg/kg of phosphate-buffered saline or tunicamycin (TM) was injected intraperitoneally. HFD+BT2 significantly suppressed the serum total cholesterol and non-high-density lipoprotein cholesterol levels more than HFD and HFD+BT1, and triglyceride levels in the epididymal adipose tissue (EAT) were remarkably decreased. Mice that received HFD+BT2 had elevated protein expressions of phospho-AMP-activated protein kinase (p-AMPK). Moreover, HFD+BT2 effectively inhibited ER stress in the liver and EAT. Consistent with our hypothesis, HFD+BT2 remarkably alleviated dyslipidemia and TM-inducible ER stress, while activating p-AMPK.

Fórmula artesanal a base de lactosuero: complemento alimenticio para niños preescolares / Artisanal whey-based formula: food supplement for preschool children

Resumen Se pretendió desarrollar una fórmula artesanal, a base de lactosuero, como complemento alimenticio para niños preescolares. Se realizó una investigación descriptiva ejecutada en tres fases: 1. Ensayos preliminares para la determinación del esquema tecnológico; 2. Evaluación fisicoquímica para la caracterización del producto y determinación de macronutrientes y 3. Evaluación sensorial donde se midió el nivel de agrado del producto final. Los datos obtenidos de los análisis se tabularon en cuatro repeticiones y se analizaron a través de estadísticas descriptivas de tendencia central y en frecuencias expresadas en tablas y gráficos mediante el programa estadístico SPSS versión 20.0. Se obtuvo que en el análisis proximal del requesón deshidratado, éste aportó por cada 100 gramos de producto: 480,28 kcal, 46,5% de proteínas, 22,36% de grasas y 23,26% de hidratos de carbono. La formulación final de la bebida constó de 2,9 g de requesón deshidratado, 3,6 g de arroz previamente cocido y 1,8 g de azúcar diluidos por cada onza preparada. Se determinó que es una fórmula hipocalórica-hiperproteica e isoosmolar, con una viscosidad de 275cP, un pH de 5,1 y con 0,291% de ácido láctico. La fórmula artesanal a base de lactosuero fue de agrado para 41 niños que participaron en el análisis sensorial. Se recomienda su uso en niños que se encuentren en condición de vulnerabilidad nutricional.

Abstract The main objective of this research was to develop an artisan formula based on whey as food supplement directed to preschool children. It was a descriptive study carried out in three phases: 1. Preliminary tests, for the determination of the technological scheme; 2. Physical-chemical evaluation, for the characterisation of the product and determination of nutrients and, 3. Sensory evaluation: the level of satisfaction of the final product measured. The data obtained from the analysis were tabulated in four repetitions and analysed through descriptive statistics of central tendency and in frequencies expressed in tables and graphs using the statistical program SPSS version 20.0. As a result, for each 100 grams of dehydrated cottage cheese this malnuprovides: 480.28 kcal, 46.5% protein; 22.36% fat and 23.26% carbohydrates. The final formulation of the drink consisted of 2.9 g of dehydrated cottage cheese, 3.6 g of previously cooked rice and 1.8 g of diluted sugar for each prepared ounce. It was determined as a hypocaloric-hyperproteic and isomolar formula, with a viscosity of 275cP, a pH of 5.1 and with 0.291% lactic acid. The artisan formula based on whey was liked by 41 children who participated in the sensory analysis. As a conclusion, it can be recommended as food supplement in children with nutritional vulnerability conditions.

Resumo O objetivo principal desta pesquisa foi desenvolver uma fórmula artesanal à base de soro de leite como suplemento alimentar direcionado a crianças pré-escolares. Foi realizado um estudo descritivo em três fases: 1. Ensaios preliminares, para determinação do esquema tecnológico; 2. Avaliação físico-química, para caracterização do produto e determinação de macronutrientes e 3. Avaliação sensorial: mediu-se o grau de satisfação do produto final. Os dados obtidos das análises foram tabulados em quatro repetições e analisados por meio de estatísticas descritivas de tendência central e em frequências expressas em tabelas e gráficos utilizando o programa estatístico SPSS versão 20.0. Como resultado da análise proximal, para cada 100 gramas de requeijão desidratado fornece: 480,28 kcal, 46,5% de proteína; 22,36% de gordura e 23,26% de carboidratos. A formulação final da bebida consistiu em 2,9 g de requeijão desidratado, 3,6 g de arroz previamente cozido e 1,8 g de açúcar diluído para cada onça preparada. O resultado concluiu que é uma fórmula hipocalórica-hiperproteica e isoosmolar, com viscosidade de 275cP, pH de 5,1 e com 0,291% de ácido lático. A fórmula artesanal à base de soro de leite foi apreciada por 41 crianças que participaram da análise sensorial. É recomendado seu uso em crianças que se encontrem em condições de vulnerabilidade nutricional.

Quality of Emulsions Based on Modified Watermelon Seed Oil, Stabilized with Orange Fibres.

The aim of the study was to evaluate emulsion systems prepared on the basis of blended fat in different ratios (watermelon seed oil and mutton tallow) stabilised by orange fibres and xanthan gum. Emulsions were subjected to stability testing by Turbiscan and were assessed in terms of mean droplet size, colour, viscosity, texture, skin hydration and sensory properties. The most stable systems were found to be the ones containing a predominance of mutton tallow in a fat phase. For these emulsions the lowest increase in mean particle size during storage was observed. The study also confirmed the synergistic effect of the thickeners used. The presented emulsions despite favourable physicochemical parameters, did not gain acceptance in sensory evaluation.