RESUMO
This study provides a comprehensive pollen micromorphology within the Nepeta genus, revealing intricate details about the pollen grains' structure and characteristics. The findings shed light on the evolutionary and taxonomical aspects of this plant genus, offering valuable insights for botanists and researchers studying Nepeta species. The pollen grains of 18 Nepeta species were studied using scanning electron microscopy (SEM) and light microscopy (LM) in Northern Pakistan. At the microscale, pollen quantitative measurements, qualitative traits, and diverse sculpturing patterns were reported and compared. Significant differences in pollen size, shape, ornamentation, and sculpturing patterns were discovered among the Nepeta species. Our data show that exine sculpturing is quite diverse, with most species exhibiting a reticulate perforate pollen pattern. Nepeta connata, Nepeta discolor, Nepeta elliptica, revealed a distinct bireticulate perforate exine stratification. Hexazonocolpate pollen is the most common. Furthermore, the surface membrane attributes of the colpus varied greatly, ranging from rough, scabrate, psilate, to sinuate patterns. Principal Component Analysis (PCA) was used to discover the key factors influencing pollen diversity. PCA results showed that polar and equatorial diameters, colpi size, and exine thickness were the most influential pollen features between Nepeta species. This study adds to our understanding of pollen morphology in the Nepeta genus, offering information on the vast range of characteristics found in this economically important group. The extensive characterization of pollen features provides useful insights for the categorization and differentiation of Nepeta species, adding to the Lamiaceae micromorphology.
Assuntos
Nepeta , Microscopia Eletrônica de Varredura , Evolução Biológica , Pólen/anatomia & histologia , PaquistãoRESUMO
Dealing with the current defaults of environmental toxicity, heating, waste management, and economic crises, exploration of novel non-edible, toxic, and waste feedstock for renewable biodiesel synthesis is the need of the hour. The present study is concerned with Buxus papillosa with seeds oil concentration (45% w/w), a promising biodiesel feedstock encountering environmental defaults and waste management; in addition, this research performed simulation based-response surface methodology (RSM) for Buxus papillosa bio-diesel. Synthesis and application of novel Phyto-nanocatalyst bimetallic oxide with Buxus papillosa fruit capsule aqueous extract was advantageous during transesterification. Characterization of sodium/potassium oxide Phyto-nanocatalyst confirmed 23.5 nm nano-size and enhanced catalytic activity. Other characterizing tools are FTIR, DRS, XRD, Zeta potential, SEM, and EDX. Methyl ester formation was authenticated by FTIR, GC-MS, and NMR. A maximum 97% yield was obtained at optimized conditions i.e., methanol ratio to oil (8:1), catalyst amount (0.37 wt%), reaction duration (180 min), and temperature of 80 °C. The reusability of novel sodium/potassium oxide was checked for six reactions. Buxus papillosa fuel properties were within the international restrictions of fuel. The sulphur content of 0.00090% signified the environmental remedial nature of Buxus papillosa methyl esters and it is a highly recommendable species for biodiesel production at large scale due to a t huge number of seeds production and vast distribution.
Assuntos
Buxus , Gerenciamento de Resíduos , Resíduos Perigosos , Biocombustíveis/análise , Ésteres , Catálise , Sódio , Óleos de PlantasRESUMO
BACKGROUND: The mountainous region of Kashmir is a biodiversity hotspot, with diverse local communities and a rich cultural history linked to nature. Mountain ecosystems are highly vulnerable to climate change. This study emphasises the need to record the indigenous ethnoecological knowledge of wild plants used for the treatment of various ailments at higher elevations in remote areas where globalisation poses a threat to this traditional knowledge. METHODS: The field survey was carried out in 2020-2022, to collect data on wild medicinal plants. Informants were selected randomly to collect indigenous medicinal knowledge using semi-structured interviews and group discussions. Various quantitative indices were employed to evaluate ethnomedicinal data. RESULTS: A total of 110 medicinal plants belonging to 49 families were recorded in the study area. These medicinal plants are extensively used by local communities for the treatment of 20 major disease categories. Asteraceae was the dominant family contributing (9.09%) to medicinal plants, followed by Polygonaceae (8.18%), Apiaceae (7.27%), Lamiaceae (5.45%), and Ranunculaceae (5.45%). We observed 166 remedies were used for the treatment of various diseases in humans, and 9 remedies were used for animals. The most frequently used medicinal remedy was tea or decoction (30.91%). Among the medicinal plants, herbs (85.5%) were most frequently used by the local populations of Kashmir, whereas leaves (10.26%) were used for the treatment of various ailments. Out of 110 species, 31 were endemic, 15 of which are endemic to the Kashmir region and 16 to the Western Himalaya. The highest RFC value was reported for Allium humile (0.77), the highest UV value for Fritillaria cirrhosa (1.33), and the highest ICF value for gastro-intestinal/digestive disorders (0.85). CONCLUSIONS: Local communities still rely on wild medicinal plants for primary healthcare. These communities retained valuable indigenous knowledge, which needs to be preserved for the conservation and sustainable utilisation of natural resources. Further field exploration is required to fully explore indigenous knowledge in the mountainous regions of Kashmir, and this knowledge has the potential to support the ongoing ecological transition.
Assuntos
Plantas Medicinais , Humanos , Fitoterapia , Ecossistema , Medicina Tradicional , Biodiversidade , EtnobotânicaRESUMO
The current study reports an ethnobotanical field investigation of traditionally gathered and consumed wild greens (Chorta) in one of the five so-called Blue Zones in the world: Ikaria Isle, Greece. Through 31 semi-structured interviews, a total of 56 wild green plants were documented along with their culinary uses, linguistic labels, and locally perceived tastes. Most of the gathered greens were described as bitter and associated with members of Asteraceae and Brassicaceae botanical families (31%), while among the top-quoted wild greens, species belonging to these two plant families accounted for 50% of the wild vegetables, which were consumed mostly cooked. Cross-cultural comparison with foraging in other areas of the central-eastern Mediterranean and the Near East demonstrated a remarkable overlapping of Ikarian greens with Cretan and Sicilian, as well as in the prevalence of bitter-tasting botanical genera. Important differences with other wild greens-related food heritage were found, most notably with the Armenian and Kurdish ones, which do not commonly feature many bitter greens. The proven role of extra-oral bitter taste receptors in the modulation of gastric emptying, glucose absorption and crosstalk with microbiota opens new ways of looking at these differences, in particular with regard to possible health implications. The present study is also an important attempt to preserve and document the bio-cultural gastronomic heritage of Chorta as a quintessential part of the Mediterranean diet. The study recommends that nutritionists, food scientists, and historians, as well as policymakers and practitioners, pay the required attention to traditional rural dietary systems as models of sustainable health.
Assuntos
Dieta Mediterrânea , Paladar , Plantas Comestíveis , Grécia , VerdurasRESUMO
This study investigates the potential role of Juglans sp. root extract-mediated copper oxide nanoparticles of Luffa cylindrica seed oil (LCSO) into methyl esters. The synthesized green nanoparticle was characterized by Energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FT-IR), and Scanning electron microscopy (SEM) spectroscopies to find out the crystalline size (40 nm), surface morphology (rod shape), particle size (80-85 nm), and chemical composition (Cu = 80.25% & O = 19.75%), accordingly. The optimized protocol for the transesterification reaction was adjusted as oil to methanol molar ratio (1:7), copper oxide nano-catalyst concentration (0.2 wt %), and temperature (90 °C) corresponding to the maximum methyl esters yield of 95%. The synthesized methyl esters were characterized by GC-MS, 1H NMR, 13C NMR, and FT-IR studies to know and identify the chemical composition of newly synthesized Lufa biodiesel. The fuel properties of Luffa cylindrica seed oil biofuel were checked and compared with the American Biodiesel standards (ASTM) (D6751-10). Finally, it is commendable to use biodiesel made from wild, uncultivated, and non-edible Lufa cylindrica to promote and adopt a cleaner and sustainable energy method. The acceptance and implementation of the green energy method may result in favourable environmental effects, which in turn may lead to better societal and economic development.
Assuntos
Luffa , Nanopartículas , Ésteres , Cobre , Óleos de Plantas/química , Biocombustíveis/análise , Espectroscopia de Infravermelho com Transformada de Fourier , Esterificação , Óxidos , CatáliseRESUMO
Conventional homogeneous-based catalyzed transesterification for the production of biodiesel can be replaced with a membrane reactor that has an immobilized heterogeneous catalyst. Combining reaction with separation while utilizing membranes with a certain pore size might boost conversion process. this investigation to study the effectiveness of membrane reactor in combination with heterogeneous green nano catalysis of MnO2. Techniques such as XRD, EDX, FTIR, SEM, and TGA were used to characterize the synthesized MnO2 nano catalyst. The highest conversion of around 94% Trachyspermum ammi oil was obtained by MnO2. The optimum process variables for maximum conversion were catalyst loading of 0.26 (wt.%), 8:1 M ratio, 90 °C reaction temperature, and time 120 min. The green nano catalyst of MnO2 was reusable up to five cycles with minimum loss in conversion rate of about 75% in the fifth cycle. Nuclear magnetic resonance validated the synthesis of methyl esters. It was concluded that membrane reactor a promising technique to efficiently transesterify triglycerides into methyl esters and enable process intensification uses MnO2 as a catalyst.
Assuntos
Ammi , Óxidos , Compostos de Manganês , Biocombustíveis , Esterificação , Ésteres , Óleos de PlantasRESUMO
Better processing techniques must be utilized widely due to the rising demand for honey. The most common honey processing techniques are applied to melissopalynomorphs to check the quality and quantity of valuable honey using microporous ultrafiltration membranes. It is essential to have the ability to selectively filter out sugars from honey using ultrafiltration. This study authenticated 24 honey samples using membrane reactors ultrafiltration protocol to describe the pollen spectrum of dominant vegetation. The purpose of this study was also to explore nutritional benefits as well as the active phytochemical constituents of honey samples. Honey samples were collected and labeled Acacia, Eucalyptus, and Ziziphus species based on plant resources provided by local beekeepers. A variety of honeybee flora was collected around the apiaries between 2020 and 2021. Honey analysis revealed that the pollen extraction of 24 bee foraging species belonging to 14 families. The honey membrane technology verified the identities of honey and nectar sources. Also, pollen identified using honey ultrafiltration membranes revealed dominant resources: Acacia spp. (69%), Eucalyptus spp. (52%) and Ziziphus spp. Honey filtration using a membrane technology classified 14 samples as unifloral, represented by six dominant pollen types. The absolute pollen count in the honey sample revealed that 58.33% (n = 14) belong to Maurizio's class I. Scanning ultrasculpturing showed diverse exine patterns: reticulate, psilate, scabrate-verrucate, scabrate-gemmate, granulate, perforate, microechinate, microreticulate, and regulate to fossulate for correct identification of honey pollen types. Honey ultrafiltration should be utilized to validate the botanical sources of honey and trace their biogeographic authenticity. Thus, it is imperative to look at the alternative useful method to identify the botanical origin of filtered honey. It is critical to separate honey from adulteration by a standardized protocol. Membrane technology has yielded significant outcomes in the purification of honey.
Assuntos
Eucalyptus , Mel , Abelhas , Animais , Mel/análise , Pólen/química , Plantas , Néctar de Plantas , Eucalyptus/químicaRESUMO
Depletion of non-renewable fuel has obliged researchers to seek out sustainable and environmentally friendly alternatives. Membranes have proven to be an effective technique in biofuel production for reaction, purification, and separation, with the ability to use both porous and non-porous membranes. It is demonstrated that a membrane-based sustainable and green production can result in a high degree of process intensification, whereas the recovery and repurposing of catalysts and alcohol are anticipated to increase the process economics. Therefore, in this study sustainable biodiesel was synthesized from inedible seed oil (37 wt%) of Cordia myxa using a membrane reactor. Transesterification was catalyzed by heterogenous nano-catalyst of indium oxide prepared with leaf extract of Boerhavia diffusa. Highest biodiesel yield of 95 wt% was achieved at methanol to oil molar ratio of 7:1, catalyst load 0.8 wt%, temperature 82.5 °C and time 180 min In2O3 nanoparticles exhibited reusability up to five successive transesterification rounds. The production of methyl esters was confirmed using Fourier-transform infrared spectroscopy and Nuclear Magnetic Resonance. The predominant fatty acid methyl ester detected in the biodiesel was 5, 8-octadecenoic acid. Biodiesel fuel qualities were determined to be comparable to worldwide ASTM D-6571 and EN-14214 standards. Finally, it was concluded that membrane technology can result in a highly intensified reaction process while efficient recovery of both nano catalysts and methanol increases the economics of transesterification and lead to sustainable production.
Assuntos
Cordia , Nanopartículas , Óleos de Plantas/química , Metanol , Biocombustíveis , Biomassa , Esterificação , Catálise , Etanol , Ácidos Graxos/químicaRESUMO
Introduction of waste and non-edible oil seeds coupled with green nanotechnology offered a pushover to sustainable and economical biofuels and bio refinery production globally. The current study encompasses the synthesis and application of novel green, highly reactive and recyclable bismuth oxide nanocatalyst derived from Euphorbia royealeana (Falc.) Boiss. leaves extract via biological method for sustainable biofuel synthesis from highly potent Cannabis sativa seed oil (34% w/w) via membrane reactors. Advanced techniques such as X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Diffraction X-Ray (EDX), and FT-IR were employed to illustrate the newly synthesized green bismuth oxide nanoparticles. 92% of FAMEs were produced under optimal reaction conditions such as a 1.5% w/w catalyst weight, 1:12 oil to methanol molar ratio, and a reaction temperature of 92 ⸰C for 3.5 h via membrane reactor. The synthesized Cannabis biodiesel was identified using the FT-IR and GC-MS techniques. The fuel properties of synthesized biofuels (acid number 0.203 mg KOH/g, density 0.8623 kg/L, kinematic viscosity 5.32 cSt, flash point 80 °C, pour point -11 °C, cloud point -11 °C, and Sulfur 0.00047 wt %, and carbon residues 0.2) were studied and established to be comparable with internationally set parameters. The experimental data (R2 = 0.997) shows that this reaction follow pseudo first-order kinetics. These findings affirm the application of green bismuth oxide nanoparticles as economical, highly reactive and eco-friendly candidate for industrial scale biodiesel production from non-edible oil seeds.
Assuntos
Biocombustíveis , Nanopartículas , Biocombustíveis/análise , Esterificação , Espectroscopia de Infravermelho com Transformada de Fourier , Catálise , Óleos de Plantas/químicaRESUMO
Botanical surveys in all parts of Pakistan are mainly focused on ethnomedicinal uses of plants, and very little attention has been paid to documenting edible wild fruit species (EWFs). Multiple methodologies and tools were used for data collection. In a recent survey 74 EWF species belonging to 29 families were documented, including their medicinal uses for the treatment of various diseases. The most cited (23%) preparation method was raw, fresh parts. The UV and RFC of EWF species ranged from 0.08 to 0.4 and from 0.02 to 0.18, respectively. In terms of specific disease treatments and their consensus, the ICF ranged from 0 to 0.38. Sexual, gastrointestinal, and respiratory disorders had the highest use reports, and 11 species of plants had the highest FL of 100%. On the basis of uses reported by the inhabitants of seven districts of Southern Khyber Pakhtunkhwa Province, the CSI ranged from the lowest 1.3 to the highest 41. It is concluded that the traditional uses of EWF species depend mainly on socio-economic factors rather than climatic conditions or the number of species. However, there is a gradual loss of traditional knowledge among the younger generations. The present survey is the first baseline study about the socio-economic dimension of local communities regarding the use of EWF species for food as well as medicine.
RESUMO
Membrane technology has been embraced as a feasible and promising substitute to the traditional technologies employed for biodiesel synthesis which are energy and time consuming. It needs less energy, has high stability, is environmentally friendly, and is simple to operate and control. Therefore, in our current study membrane technology was employed to synthesize biodiesel from Toona ciliate novel and non-edible seed oil. Since Toona ciliata has affluent oil content (33.8%) and is effortlessly and extensively available. In fact, we intended to scrutinize the effects of green synthesized barium oxide nanoparticles for one step transesterification of biodiesel production using membrane technology followed by characterization of prepared catalyst via innovative techniques. Optimal yield of biodiesel attained was 94% at 90 °C for 150 min with methanol to oil molar ratio of 9:1 and amount of about 0.39 wt %. Quantitative analysis of synthesized Toona ciliata oil biodiesel was carried out by advance techniques of Gas chromatography mass spectrometry (GC-MS), Fourier-transform infrared (FTIR) spectroscopy and Nuclear magnetic resonance (NMR) which authorize the synthesis of fatty acid methyl ester compounds using oil from Toona ciliata seeds. Values of Toona ciliata fuel properties for instance flash point (70°C), density (0.89 kg/m3), viscosity (5.25 mm2/s), cloud point (-8°C) and pour point (-11°C) met the specifications of international standards i. e American (ASTM D-6751), European (EN-14214) and China (GB/T 20,828). Subsequently, it is concluded that membrane technology is environmentally friendly and efficient technique for mass-production of sustainable biodiesel using green nano catalyst of barium oxide.
Assuntos
Biocombustíveis , Toona , Compostos de Bário , Biocombustíveis/análise , Catálise , Esterificação , Ésteres/análise , Ácidos Graxos/análise , Metanol/análise , Óxidos , Óleos de Plantas/química , Sementes/químicaRESUMO
The local farmers of Central Punjab, Pakistan have been using indigenous grasses as vital components of ruminant diets, but little is reported about their nutritional potential. Hence this study investigated nutritive potential of a selection of ethnobotanically important fodder grasses. Multiple nutritional parameters (proximate components, fibre fractions), secondary metabolites (phenolics, tannins) and in vitro digestibility values were determined. Furthermore, the legitimacy of ethnobotanical knowledge of local inhabitants about these grasses was also verified. The results suggested that majority (77%) of these grasses can be regarded as good quality fodders because of their high protein (169 g/kg) and good digestibility (457 g/kg) with moderate fibre (≤ 602 g/kg), lignin (≤ 50 g/kg) and secondary metabolites (total phenols ≤ 87 g/kg, total tannins ≤ 78 g/kg, condensed tannins ≤ 61 g/kg). Pearson correlation between nutritional parameters indicated that in vitro digestibility values were positively correlated with crude proteins (IVDMD, r = + 0.83 and IVOMD, r = + 0.83 respectively) and negatively correlated with fibre (NDF, r = - 0.91), ADF, r = - 0.84 and ADL, r = - 0.82) contents. Moreover, a positive relationship was identified between ethnobotanical knowledge and laboratory findings for studied grasses. Spearman correlation test showed that ranking of grasses based on ethnobotanical preferences were highly correlated (r values) with the laboratory results for CP (0.85), NDF (- 0.76), ADF (- 0.72) and ADL (- 0.62). The resilient complementarities between ethnobotanical preferences and nutritive analysis authenticate farmer's traditional knowledge, which needed to be aligned with the corresponding scientific data. Farmers can use these findings for appropriate fodder selection and development of precise supplements for feeding ruminants within a sustainable and economically viable livestock industry for food security.
Assuntos
Fazendeiros , Poaceae , Ração Animal/análise , Animais , Fibras na Dieta , Digestão , Humanos , Valor Nutritivo , Paquistão , Ruminantes , TaninosRESUMO
We confined the formation and characterization of heterogenous nano-catalysts and then used them to produce biodiesel from the novel non-edible seed oil of Prunus aitchisonii. P. aitchisonii seeds' oil content was extracted at about 52.4 ± 3% with 0.77% FFA. Three different heterogenous nano-catalysts-calcined (CPC), KPC, and KOH-activated P. aitchisonii cake Titanium Dioxide (TiO2)-were synthesized using calcination and precipitation methods. The mentioned catalysts were characterized through XRD, SEM, and EDX to inspect their crystallin dimension, shape, and arrangement. Titanium dioxide has morphological dimensions so that the average particle size ranges from 49-60 nm. The result shows that the crystal structure of TiO2 is tetragonal (Anatase). The surface morphology of CPC illustrated that the roughness of the surface was increased after calcination, many macropores and hollow cavities appeared, and the external structure became very porous. These changes in morphology may increase the catalytic efficiency of CPC than non-calcined Prunus aitchisonii oil cake. The fuel belonging to PAOB stood according to the series suggested by ASTM criteria. All the characterization reports that P. aitchisonii is a novel and efficient potential source of biodiesel as a green energy source.
Assuntos
Prunus armeniaca , Prunus , Biocombustíveis/análise , Catálise , Óleos de Plantas/química , Prunus/química , Sementes/químicaRESUMO
Membrane technology has been adopted as a prospective and promising alternative to the standard technology used for biodiesel production since the time when it had some limitations. During this research project, the inedible seed oil generating feedstock known as Saussurea heteromalla was put through a biodiesel production process that utilized membrane technology with an effort to increase the yield of methyl ester. The transesterification process was mediated by zirconium oxide nanoparticles that were generated using an aqueous extract of Portulaca oleracea leaf. With an oil to methanol ratio of 1:9, a catalyst concentration of 0.88 (wt. %), temperature of 87 °C, and reaction time of 180 min, the highest possible biodiesel yield of 93% was achieved. The findings of the catalyst characterization demonstrated the purity of the zirconium oxide nano particles and their nanoscale nature with average particle size of 31 nm. Using gas chromatography and mass spectrometry (GC/MS), an examination of biodiesel revealed the presence of four different peaks of methyl esters. Using Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance, we were able to verify that the production of methyl esters in the biodiesel sample was successful (NMR). Zerconium oxide nanoparticles were found reusable up to five consecutive cycles of transesterification. The fuel-related properties of methyl ester have been determined and are in line with the requirements of the international standards ASTM D-6571 and EN 14214. In the course of our ongoing research, we made use of membrane technology, which led to the production of biodiesel from the seed oil of Saussurea heteromalla that was better for the environment, more cost effective, and produced in greater quantities.
Assuntos
Biocombustíveis , Saussurea , Biocombustíveis/análise , Catálise , Esterificação , Ésteres/química , Óleos de Plantas/químicaRESUMO
Microscopic visualization of micro-morphological characters were analyzed using a scanning electron microscopic (SEM) tool, which has proven to be very successful to analyze the pollen surface peculiarities. The significant goal of this research was to perform microscopic examination of pollen of some of the most frequently visited honeybee floral species around apiaries. Micro-morphological characterization of frequented honeybees foraged plants were discussed. A total of 15 species, belonging to 11 different families were identified for the foraging activities of honeybees, namely, Lantana camara, Jatropha integerrima, Helianthus annuus, Tecoma stans, Lagerstroemia indica, Duranta erecta, Cosmos sulphureus, Hymenocollis littoralis, Moringa oleifera, Cestrum nocturnum, Parthenium hysterophorus, Volkameria inermis, Catharanthus roseus, Malvastrum coromandelianum, and Citharexylum spinosum. The microscopic slides were prepared using the acetolysis method, and the qualitative and quantitative features were measured and described using microscopic tools. The pollen type sculpture varies from psilate scabrate to echinate and colpi from tricolpate to tetracolpate. Quantitative parameters such as polar diameter, mesocolpium distance, equatorial dimensions, aperture size, spine diameter, and exine thickness were calculated using IBM SPSS Statistics 20. The exine thickness was measured at its maximum in C. roseus (3.85 µm), whereas it was at its minimum of 0.90 µm in L. indica and D. erecta. Pollen fertility was estimated to be highest in H. annus (88%). The current research validates scanning microscopic features of pollen of the honeybee floral species, which is helpful for the accurate identification and commercializing of honey production to generate revenue for beekeepers through the exploration of bee floral diversity. RESEARCH HIGHLIGHTS: Pollen spectrum examination using microscopic imaging techniques. Variations examined through scanning microscopy in pollen ultrastructure. Micro-morphology has taxonomic value for accurate identification of honeybee flora. Authentication of Honeybee floral species for sustainable beekeeping.
Assuntos
Asteraceae , Pólen , Animais , Abelhas , Microscopia Eletrônica de Varredura , Plantas , Pólen/ultraestruturaRESUMO
In this work, Dodonaea oil was studied as a potential biodiesel source. Dodonaea (Dodonaea viscosa Jacq.) is an evergreen shrubby plant that thrives in tropical and subtropical conditions. The plant produces high-grade biodiesel in terms of both quantity and quality despite its naturally high fat content. In the transesterification followed by esterification reaction, varied ratios of oil to methanol, constant temperature (60°), reaction duration (1 h), and different catalyst concentrations (0.25-0.75% (w/w) were utilized. A maximum biodiesel yield of 90% was achieved. For fuel characteristic analysis, the prepared biodiesel was specified and compared to ASTM criteria. The chemical composition was verified using analytical techniques such as FT-IR and NMR spectroscopy. As a result of the foregoing, Dodonaea is considered a possible bioenergy source, particularly in the transport sector.
RESUMO
Biodiesel is a sustainable, inexpensive, and alternative energy source produced from vegetable oils and animal fats. Precise and authentic identification of oil yielding plant species is very crucial. Therefore, scanning electron microscopy (SEM) was employed in our current investigation to study micromorphological characteristics of ten novel oil yielding seeds for their reliable identification. Macromorphological characters of sample seeds were explored by light microscopy. Seed size varied from 16 to 6.2 mm in length and 18.4-4.5 mm in width. Seed shape varied from ovoid to cordial and color from beige to brown. Seed oil content ranged from 25% to 45% (w/w). Whereas free fatty acid (FFA) content of seed oil varied from 0.42 to 3.4 mg KOH/g. Biodiesel potential of Chamaerops humilis was found to be highest (98%) in all. Besides, ultra-structural observation of seeds demonstrated variation in surface sculpturing which varied from rugous, reticulate, perforate, striate, and webby. Periclinal wall arrangements varied from rough, ridged, depressed, thick and curved whereas, anticlinal walls pattern showed variation from wavy, smooth, raised, deep and depressed. It was ultimately concluded that Scanning electron microscopy could serve as an advanced tool representing hidden ultra-structural characters of seeds. It offers significant knowledge to researchers and local community for their accurate and genuine identification. RESEARCH HIGHLIGHTS: Non-edible oil yielding seeds as promising source of bioenergy. Scanning electron microscopy (SEM) as reliable tool for identification. Variation in Micromorphological characters among selected seeds. Classification of non-edible oil yielding plants via micromorphological characters.
Assuntos
Biocombustíveis , Elétrons , Biocombustíveis/análise , Microscopia Eletrônica de Varredura , Óleos de Plantas/análise , Sementes/ultraestruturaRESUMO
Green nano-technology together with the availability of eco-friendly and alternative sources are the promising candidates to combat environment deteriorations and energy clutches globally. The current work focuses on the synthesis and application of newly synthesized nano catalyst of Iodine doped Potassium oxide I (K2O) for producing sustainable biodiesel from novel non-edible seed oils of Coronopus didymus L. using membrane based contactor to avoid emulsification and phase separation issues. Highest biodiesel yield (97.03%) was obtained under optimum conditions of 12:1 methanol to oil ratio, reaction temperature of 65 °C for 150 min with the 1.0 wt% catalyst concentration. The lately synthesized, environment friendly and recyclable Iodine doped Potassium oxide K (IO)2 catalyst was synthesized via chemical method followed by characterization via advanced techniques including EDX, XRD, FTIR and SEM analysis. The catalyst was proved to be stable and efficient with the reusability of five times in transesterification reaction. These analysis have reported the sustainability, stability and good quality of biodiesel from seed oil of Coronopus didymus L. using efficient Iodine doped potassium oxide catalyst. Thus, non-edible, environment friendly and novel Coronopus didymus L. seeds and their extracted oil along with Iodine doped potassium oxide catalyst seems to be highly affective, sustainable and better alternative source to the future biodiesel industry. Also, by altering the reaction equilibrium and lowering the purification phases of the process, these studies show the potential of coupling transesterification and a membrane contactor.
Assuntos
Biocombustíveis , Iodo , Biocombustíveis/análise , Catálise , Esterificação , Iodetos , Óxidos , Óleos de Plantas/química , Compostos de PotássioRESUMO
Opuntia is the most diverse and widely distributed drought resistant promising genus of family Cactaceae. The cladodes were utilized to quantify the chemical composition of these plants helpful in lignocellulose conversion and their application towards biofuel production. The present study was aimed to evaluate and compare the taxonomic relationship based on morphology, stem anatomy and palynology of important desert cacti including Opuntia dillenii and Opuntia monacantha. This study also evaluates the potential usefulness of morphological, anatomical and pollen traits using light and scanning electron microscopy. The obtained microcharacters of stem and flowers are considered diagnostic at the generic and specific levels. Some distinguishing morphological features observed were elliptical to obovate cladodes, 1-7 spines per areole and presence of glochidia in O. dillenii. Pollen and stem anatomical characters of the studied taxa are considered highly diagnostic at the generic and species levels. The epidermis has irregular and wavy cells, with straight to sinuate wall pattern and paracytic stomata. Pollen grains appear as pantoporate and prolate spheroidal having reticulate to perforate-reticulate sculpturing while exine semi-tectate to tectate. The taxonomic features studied could be valuable to elaborate and helpful in correctly identification of Opuntia species. The methods of diverse microscopic examination also providing sufficient evidence about the taxonomy of the Opuntia species. RESEARCH HIGHLIGHTS: Description and illustration of desert cacti Opuntia. Morpho-anatomy and palynology were studied with LM and SEM. Highly variation in taxonomic qualitative and quantitative features. Systematic significance based on taxonomic characters was presented.