Accumulation of mineral oil saturated hydrocarbons (MOSH) in female Fischer 344 rats: Comparison with human data and consequences for risk assessment.

Female Fischer 344 rats were orally exposed to a mixture of mineral oil saturated hydrocarbons (MOSH) of broad molecular mass range at doses of 40, 400 and 4000mg/kg feed. Amounts and compositions of the MOSH were analyzed in liver, spleen, adipose tissue and the carcass after exposure during 30, 60, 90 and 120d as well as after 90d exposure followed by 30d depuration. At 40mg/kg in the feed, after 30d of exposure, 10.9% of the ingested MOSH were recovered from the animal body; after 90d plus 30d depuration it was 3.9%. In liver and spleen, the maximum retention in terms of molecular mass (simulated distillation) was at n-C29; in adipose tissue and carcass it was at n-C15/16. The differentiation between MOSH below and above n-C25 (Class I versus Class II and III oils), used for present regulation, is not supported by the present data on accumulation; structural characteristics seem more pertinent than molecular mass. Concentrations in the tissues increased far less than proportionally with the dose, rendering linear extrapolation to low doses questionable. No steady state was reached after 120d. In fact, comparing with the concentrations in human tissues at the estimated exposure, extrapolation from animal experiments seems to grossly underestimate human internal exposure. Comprehensive two-dimensional gas chromatography (GCxGC) was used to characterize the MOSH residues in the tissues with the aim of identifying the most strongly accumulated types. In the liver and spleen, the highly branched hydrocarbons dominated, whereas in the adipose tissue it was the n-alkanes and species with main n-alkyl moieties. Strong MOSH accumulation is not of concern per se, but the safety at the high concentrations in human tissues needs to be re-evaluated, possibly taking into account also end points other than granuloma formation.

Acrylamide in a fried potato dish (rösti) from restaurants in Zurich, Switzerland.

Rösti, a fried potato product, is a large contributor to acrylamide exposure locally in Switzerland. A survey of 55 dishes prepared by 51 restaurants in the city of Zurich showed that the average rösti contained 702 µg/kg acrylamide. By analysing the content of reducing sugars in the potatoes used for frying, it is shown that with simple measures, the exposure to acrylamide could easily be reduced by factor 2 or more, while even improving the culinary experience. Though rösti is a typical dish in the German-speaking areas in Switzerland, the result may be of general interest for fried potato products which are popular in large areas of Central Europe.

Is comprehensive analysis of potentially relevant migrants from recycled paperboard into foods feasible?

Legislation on food contact materials, mainly focusing on food safety, requires the absence of potentially harmful substances in the migrate from packaging materials. For recycled paperboard with essentially unknown input this presupposes comprehensive analysis of all substances potentially migrating above the regulatory threshold. Present chemical analysis is strong in target analysis, but not in methodologies enabling comprehensive analysis of unknown mixtures at low detection limits. An attempt was made to analyze the potential migrants into dry foods as comprehensively as possible. The required detection limit was derived from the conventional regulatory European detection limit of 0.01 mg/kg in food, which was approximated by a detection limit in paperboard of 0.1mg/kg. Various obstacles had to be overcome and adjusted or even new tools were required. Compromises were unavoidable, which could have resulted in loss of relevant components. This paper points out facets of related analytical methodology, but also provides an analytical base for the information of regulators about the feasibility of the old legal requirements that substances endangering human health must not migrate into food.

Search for a more adequate test to predict the long-term migration from the PVC gaskets of metal lids into oily foods in glass jars.

As shown previously, the conventional testing procedure for simulating long-term migration from the gaskets of metal closures into oily foods does not adequately reflect reality. It appears to be impossible to accelerate migration to the extent that the situation at the end of the shelf life of a product can be anticipated in a few days or weeks. Therefore, we investigated whether long-term migration could be extrapolated from migration rates determined for new lids. Jars were kept in the normal upright position. Since heat treatment may have a strong temporary impact, migration during the initial heating for pasteurization or sterilization and storage at ambient temperature were determined using different lids. Commercial products were recalled from sales points throughout Europe to determine the real migration over extended periods of time and for jars with differing histories. This migration was compared with data from the short-term testing to investigate whether an empirical relationship could be derived. The results show that the short-term test enables the comparison of lids and plasticizers in the initial phase of migration, but that long-term extrapolation presupposes more complex kinetic modeling. The results also demonstrate that the legal relevance of "official" testing methods should be reconsidered to avoid conflict when food contact materials comply with migration limits in the test but not in actual application.

Compositional GC-FID analysis of the additives to PVC, focusing on the gaskets of lids for glass jars.

A gas chromatographic (FID) method is described which aims at the quantitative compositional analysis of the additives in plasticized PVC, particularly the plastisols used as gaskets for lids of glass jars. An extract of the PVC is analysed directly as well as after transesterification to ethyl esters. Transesterification enables the analysis of epoxidized soya bean and linseed oil (ESBO and ELO) as well as polyadipates. For most other additives, the shifts in the chromatogram resulting from transesterification is used to confirm the identifications made by direct analysis. In the gaskets of 69 lids from the European market used for packaging oily foods, a broad variety of plastisol compositions was found, many or possibly all of which do not comply with legal requirements. In 62% of these lids, ESBO was the principal plasticizer, whereas in 25% a phthalate had been used.

Potential of acrylamide formation, sugars, and free asparagine in potatoes: a comparison of cultivars and farming systems.

Glucose, fructose, sucrose, free asparagine, and free glutamine were analyzed in 74 potato samples from 17 potato cultivars grown in 2002 at various locations in Switzerland and different farming systems. The potential of these potatoes for acrylamide formation was measured with a standardized heat treatment. These potentials correlated well with the product of the concentrations of reducing sugars and asparagine. Glucose and fructose were found to determine acrylamide formation. The cultivars showed large differences in their potential of acrylamide formation which was primarily related to their sugar contents. Agricultural practice neither influenced sugars and free asparagine nor the potential of acrylamide formation. It is concluded that acrylamide contents in potato products can be substantially reduced primarily by selecting cultivars with low concentrations of reducing sugars.