Essential Oils from Apiaceae, Asteraceae, Cupressaceae and Lamiaceae Families Grown in Serbia: Comparative Chemical Profiling with In Vitro Antioxidant Activity.

The aim of the present study was to investigate the chemical profile and antioxidant activity of essential oils obtained from the most commonly grown plant species in Serbia. Aromatic and medicinal plants from Lamiaceae (Mentha x Piperita, Ocimum basilicum, Origanum majorana, Origanum vulgare, Salvia officinalis, Satureja hortensis, Satureja montana and Thymus vulgaris), Asteraceae (Ehinacea purpurea and Matricaria chamomilla), Apiaceae (Anethum graveolens, Carum carvi, Foeniculum vulgare, Petroselinum crispum and Pimpinella anisum) and Cupressaceae (Juniperus comunis) were selected as raw material for essential oils (EOs)' isolation. Hydrodistillation (HD) was used for the isolation of EOs while they were evaluated in terms of yield and terpenoid profiles by GC-MS. In vitro radical scavenging DPPH and ABTS+ radical activities were carried out for all EOs. Finally, a principal component analysis (PCA) was performed with the experimental results of the composition and antioxidant activity of the EOs, which showed a clear distinction between the selected plant species for the aforementioned responses. This work represents a screening tool for the selection of other EO candidates for further processing by emerging extraction techniques and the use of EOs as natural additives for meat products.

Extraction of Peppermint Essential Oils and Lipophilic Compounds: Assessment of Process Kinetics and Environmental Impacts with Multiple Techniques.

Consumers are becoming more mindful of their well-being. Increasing awareness of the many beneficial properties of peppermint essential oil (EO) has significantly increased product sales in recent years. Hydrodistillation (HD), a proven conventional method, and a possible alternative in the form of microwave-assisted hydrodistillation (MWHD) have been used to isolate peppermint EO. Standard Soxhlet and alternatively supercritical fluid (SFE), microwave-assisted, and ultrasound-assisted extraction separated the lipid extracts. The distillations employed various power settings, and the EO yield varied from 0.15 to 0.80%. The estimated environmental impact in terms of electricity consumption and CO2 emissions suggested that MWHD is an energy efficient way to reduce CO2 emissions. Different extraction methods and solvent properties affected the lipid extract yield, which ranged from 2.55 to 5.36%. According to the corresponding values of statistical parameters, empiric mathematical models were successfully applied to model the kinetics of MWHD and SFE processes.

Nanoencapsulation of Promising Bioactive Compounds to Improve Their Absorption, Stability, Functionality and the Appearance of the Final Food Products.

The design of functional foods has grown recently as an answer to rising consumers' concerns and demands for natural, nutritional and healthy food products. Nanoencapsulation is a technique based on enclosing a bioactive compound (BAC) in liquid, solid or gaseous states within a matrix or inert material for preserving the coated substance (food or flavor molecules/ingredients). Nanoencapsulation can improve stability of BACs, improving the regulation of their release at physiologically active sites. Regarding materials for food and nutraceutical applications, the most used are carbohydrate-, protein- or lipid-based alternatives such as chitosan, peptide-chitosan and ß-lactoglobulin nanoparticles (NPs) or emulsion biopolymer complexes. On the other hand, the main BACs used in foods for health promoting, including antioxidants, antimicrobials, vitamins, probiotics and prebiotics and others (minerals, enzymes and flavoring compounds). Nanotechnology can also play notable role in the development of programmable food, an original futuristic concept promising the consumers to obtain high quality food of desired nutritive and sensory characteristics.

Functional Foods: Product Development, Technological Trends, Efficacy Testing, and Safety.

Functional foods is a very popular term in the social and scientific media; consequently, food producers have invested resources in the development of processed foods that may provide added functional benefits to consumers' well-being. Because of intrinsic regulation and end-of-use purposes in different countries, worldwide meanings and definitions of this term are still unclear. Hence, here we standardize this definition and propose a guideline to attest that some ingredients or foods truly deserve this special designation. Furthermore, focus is directed at the most recent studies and practical guidelines that can be used to develop and test the efficacy of potentially functional foods and ingredients. The most widespread functional ingredients, such as polyunsaturated fatty acids (PUFAs), probiotics/prebiotics/synbiotics, and antioxidants, and their technological means of delivery in food products are described. The review discusses the steps that food companies should take to ensure that their developed food product is truly functional.

Untargeted screening of the bound / free phenolic composition in tomato cultivars for industrial transformation.

BACKGROUND: Tomato is one of the most important agricultural crops and it is characterized by a wide bioactive compound profile. However, little information is reported on its comprehensive polyphenol profile. In this work, 13 commercial tomato cultivars for industrial transformation were screened by ultra-high-pressure liquid chromatography coupled to quadrupole-time-of-flight mass spectrometry (UHPLC-QTOF-MS) for both free and bound phenolic profiles. Thereafter, the in vitro antioxidant activity of each cultivar was assessed by ferric reducing antioxidant power (FRAP) and oxygen radical absorbance activity (ORAC) assays. Multivariate statistics, i.e. orthogonal projection to latent structures discriminant analysis (OPLS-DA), were then used to model samples according to their distinct phenolic signatures, thus providing compounds that better discriminated between the distributions of the cultivars that were considered. RESULTS: More than 350 phenolic compounds could be identified across the samples that were considered: flavonoids (such as flavones and flavanols), hydroxycinnamic acids, lignans, and lower-molecular-weight phenolics were the most frequently observed classes of phenolics in tomato berries. Anthocyanins were the most abundant class among bound phenolics (being highest in the Leader F1 and Defender F1 cultivars), followed by tyrosols (mainly in Heinz cultivars). However, flavones and hydroxybenzoic acids were the most represented discriminant phenolics in the bound fraction. CONCLUSIONS: Untargeted metabolomics allowed significant differences in phenolic composition to be outlined across the tomato cultivars that were analyzed. Such differences were particularly evident regarding the free-to-bound phenolic ratio, hence allowing differences in the bioaccessibility of phenolics to be postulated. © 2019 Society of Chemical Industry.

Toxic activity of Prunus spinosa L. flower extract in hepatocarcinoma cells.

Prunus spinosa L. (blackthorn) is used in traditional medicine as a remedy for various diseases. To establish its anticancer properties, we exposed human liver cancer cells (Hep G2) to a range of blackthorn flower extract concentrations (10-200 µg/mL) and determined cytotoxic activity with the neutral red and kenacid blue methods after 24, 48, and 72 h of incubation. Statistically significant inhibitory effects on Hep G2 cellular proliferation were observed at concentrations above 50 µg/mL (p<0.001-0.05). Cell viability was lower when determined with neutral red than kenacid blue method. In addition, we evaluated antioxidant/prooxidant effects of the blackthorn flower extract by measuring reactive oxygen species (ROS), and the results confirmed its prooxidant behaviour within the applied concentration range. Flow cytometry determined primarily necrotic and apoptotic cell death, which provides additional evidence of its cytotoxic effect on liver carcinoma.

An overview of organosulfur compounds from Allium spp.: From processing and preservation to evaluation of their bioavailability, antimicrobial, and anti-inflammatory properties.

The use of Allium species and their extracts has been known since immemorial times due to their health beneficial properties. It is known that functional properties of Allium genus come from the high content of bioactive compounds. The biological activity of Allium extracts will be conditioned by the type of Allium variety, agricultural conditions, and specific extraction process used since all these factors affect the content and the profile of bioactive compounds. Innovative extraction techniques in comparison to conventional processes could be considered as a promising tool to recover bioactive compounds from Allium spp. with antimicrobial and anti-inflammatory properties. Trying to fill the gap in the literature, this paper reviews the chemical composition, the effects of processing on the nutritional and bioactive composition of Allium species and their extracts. Moreover, the antimicrobial and anti-inflammatory effects, as well as the bioavailability of bioactive compounds of edible members from the Allium genus is discussed.

Extraction of bioactive compounds and essential oils from mediterranean herbs by conventional and green innovative techniques: A review.

Market interest in aromatic plants from the Mediterranean is continuously growing mainly due to their medicinal and bioactive compounds (BACs) with other valuable constituents from essential oils (EOs). From ancient times, these plants have been important condiments for traditional Mediterranean cuisine and remedies in folk medicine. Nowadays, they are considered as important factors for food quality and safety, due to prevention of various deteriorative factors like oxidations and microbial spoilage. EOs have different therapeutic benefits (e.g. antioxidant, anti-inflammatory, antimicrobial, and antifungal), while BACs mostly affect nutritive, chemical, microbiological, and sensory quality of foods. Currently, many plant extracts are used for functional (healthy) foods, which additionally fuels consumer and industrial interest in sustainable and non-toxic routes for their production. EO yields from dried plants are below 5%. Their extraction is strongly dependent on the hydrophobic or lipophilic character of target molecules, hence the common use of organic solvents. Similarly, BACs encompass a wide range of substances with varying structures as reflected by their different physical/chemical qualities. Thus, there is a need to identify optimal non-toxic extraction method(s) for isolation/separation of EO/BCs from plants. Various innovative non-thermal extractions (e.g. ultrasound-, high-pressure-, pulsed electric fields assisted extraction, etc.) have been proposed to overcome the above mentioned limitations. These techniques are "green" in concept, as they are shorter, avoid toxic chemicals, and are able to improve extract yields and quality with reduced consumption of energy and solvents. This research provides an overview of such extractions of both BAC and EOs from Mediterranean herbs, sustained by innovative and non-conventional energy sources.

Active packaging films with natural antioxidants to be used in meat industry: A review.

Spoilage of meat products during processing, distribution and exposure in the markets have an important negative impact on meat industry from an economic point of view. Two of the main problems of meat and products during processing and subsequent storage are lipid oxidation and deterioration due to microorganism growth. In this context, several packaging alternatives have been developed by meat industry in order to limit these losses and to extend the meat products´ shelf life. Over the last years, the use of active packaging has been proposed as an alternative to traditional packaging. The principle of active packaging, particularly antioxidant active packaging, consists of including active agents in the packaging which interact with meat and/or its environment, either by trapping pro-oxidant compounds or by releasing antioxidant compounds in order to delay degradation due to lipid oxidation. Therefore, the use of active packaging is presented as a future option to solve the problems derived from oxidative deterioration of meat and meat products. However, its use will depend on the costs involved in the development of this active packaging. Therefore, this review will give an overview about the use of active packaging and natural antioxidants, the active film development techniques, as well as the use of biopolymers as substitutes for synthetic polymers and their direct application in the meat industry.

Novel Food Processing and Extraction Technologies of High-Added Value Compounds from Plant Materials.

Some functional foods contain biologically active compounds (BAC) that can be derived from various biological sources (fruits, vegetables, medicinal plants, wastes, and by-products). Global food markets demand foods from plant materials that are “safe”, “fresh”, “natural”, and with “nutritional value” while processed in sustainable ways. Functional foods commonly incorporate some plant extract(s) rich with BACs produced by conventional extraction. This approach implies negative thermal influences on extraction yield and quality with a large expenditure of organic solvents and energy. On the other hand, sustainable extractions, such as microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), high-pressure assisted extraction (HPAE), high voltage electric discharges assisted extraction (HVED), pulsed electric fields assisted extraction (PEF), supercritical fluids extraction (SFE), and others are aligned with the “green” concepts and able to provide raw materials on industrial scale with optimal expenditure of energy and chemicals. This review provides an overview of relevant innovative food processing and extraction technologies applied to various plant matrices as raw materials for functional foods production.

In vitro antioxidant and antihypertensive compounds from camu-camu (Myrciaria dubia McVaugh, Myrtaceae) seed coat: A multivariate structure-activity study.

Camu-camu (Myrciaria dubia) pulp, seeds, and skin are widely known because of their nutritional properties. However, the seed coat has never been studied as a source of bioactive compounds. Herein, we characterized the phenolic composition, the antioxidant activity, and inhibition of angiotensin-converting enzyme (ACE) of three different extracts (water, propanone, and ethanol) from this residue and assessed the structure-activity using bivariate and multivariate statistical approaches. Phenolic acids and flavonoids were quantified by high-performance liquid chromatography while the ferric reducing antioxidant power (FRAP), inhibition of lipid peroxidation using egg yolk and Wistar rat brain, scavenging of 2,2-diphenyl-1-picrylhydrazyl (DPPH•) radical, Folin-Ciocalteu reducing capacity (FCRC), and the inhibition of angiotensin-converting enzyme (ACE) by the extracts were also analyzed. t-Resveratrol was found in camu-camu seed coat for the first time. The aqueous extract had the highest total phenolic content, FRAP, DPPH•, FCRC, and inhibition of lipid oxidation using both chemical and biological assays, while the propanone extract showed the opposite behavior but it presented higher in vitro antihypertensive activity. The ethanolic extract exhibited intermediate values for the responses. The association between chemical composition and the functional properties of the camu-camu seed coat extracts were revealed using correlation analysis and principal component analysis.

Berries extracts as natural antioxidants in meat products: A review.

The aim was to evaluate antioxidants from berries as replacement food additives for inhibition of lipid and protein oxidation in meat and meat products, since meats are highly susceptible to oxidation. Oxidation can be delayed/retarded by synthetic antioxidants with phenolic structures (e.g. butylated hydroxytoluene). However, new natural alternatives are needed for synthetic antioxidants due to the controversy regarding their possible negative health effects and consumers' demand for more 'natural' food additives. Berries are a good source of phenolic compounds, especially anthocyanins, which can be used as the potential alternative. Reviewed berries included bearberry (Arctostaphylos sp.), blueberry (Vaccinium sp.), blackberry (Rubus sp.), blackcurrant (Ribes nigrum), cranberry (Vaccinium sp.), cloudberry (Rubus chamaemorus), strawberry (Fragaria ananassa), and grape berries (Vitis sp.). Data implied that blueberries, blackberries, cranberries, and grapes can be useful for replacing/decreasing synthetic antioxidants in meat products. Their extracts have antioxidant polyphenols with health benefits that are useful for stabilizing meat products.

Innovative "Green" and Novel Strategies for the Extraction of Bioactive Added Value Compounds from Citrus Wastes-A Review.

Citrus is a major processed crop that results in large quantities of wastes and by-products rich in various bioactive compounds such as pectins, water soluble and insoluble antioxidants and essential oils. While some of those wastes are currently valorised by various technologies (yet most are discarded or used for feed), effective, non-toxic and profitable extraction strategies could further significantly promote the valorisation and provide both increased profits and high quality bioactives. The present review will describe and summarize the latest works concerning novel and greener methods for valorisation of citrus by-products. The outcomes and effectiveness of those technologies such as microwaves, ultrasound, pulsed electric fields and high pressure is compared both to conventional valorisation technologies and between the novel technologies themselves in order to highlight the advantages and potential scalability of these so-called "enabling technologies". In many cases the reported novel technologies can enable a valorisation extraction process that is "greener" compared to the conventional technique due to a lower energy consumption and reduced utilization of toxic solvents.