Casein phosphopeptide amorphous calcium phosphate and universal adhesive resin as a complementary approach for management of white spot lesions: an in-vitro study.

BACKGROUND: White spot lesion (WSL) is the most common consequence during and after orthodontic treatment. This study was conducted to investigate the ability of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) coupled with universal adhesive resin to treat white spot lesions. MATERIAL AND METHODS: Forty-five extracted premolars were sectioned to create 90 specimens. Seventy-five specimens were demineralized to generate artificially created WSLs. Different strategies have been applied for the management of the artificially created WSLs. Six experimental groups were employed: Group I: sound enamel (control), Group II: demineralized enamel (artificially-created WSLs), Group III: ICON resin-treated WSLs, Group IV: CPP-ACP-treated WSLs, Group V: universal adhesive resin-treated WSLs, and Group VI: CPP-ACP followed by universal adhesive resin-treated WSLs. Assessment of color stability using a spectrophotometer, surface microhardness using a Vickers tester, and surface roughness using a profilometer was done. The surface topography of representative specimens from each experimental group was inspected using a scanning electron microscope. Collected data were analyzed using one-way ANOVA followed by Tukey's post hoc test at p ≤ 0.05. RESULTS: White spot lesions treated with CPP-ACP and subsequently coated with universal adhesive resin (Group VI) exhibited a significantly lower ΔE than both CPP-ACP (Group IV) and universal adhesive resin-treated (Group V) groups (p ≤ 0.05), but it was not significantly different from the ICON resin-treated group (Group III). For surface microhardness, WSLs treated with CPP-ACP and consequently coated with universal adhesive resin (Group VI) recorded the highest mean that was significantly different from both ICON resin (Group III) and universal adhesive resin-treated (Group V) groups (p ≤ 0.05). All the tested strategies (ICON resin, CPP-ACP, universal adhesive resin, and CPP-ACP followed by universal adhesive resin) significantly lowered the surface roughness of the WSLs (p ≤ 0.05), while no significant difference was detected among them. CONCLUSIONS: Combining a considerable caries remineralizing program using CPP-ACP with subsequent universal adhesive resin infiltration could be a promising approach to manage WSLs efficiently through increasing surface microhardness and restoring esthetic while developing a smoother surface.

Comparison of 3- and 90-day bond strengths of 3 types of cement to nickel-chromium alloy.

The purpose of this in vitro study was to compare the 3- and 90-day bond strengths of 3 cements used for luting metal-ceramic crowns. Zinc phosphate cement (ZPC; SS White), resin-modified glass ionomer cement (RMGIC; Fuji Plus), and self-adhesive resin cement (SARC; RelyX U200) were assessed in 2 different treatment conditions (with and without microsandblasting of the alloy) and at 2 experimental times (3 days [E1] and 90 days [E2] after cementation). The buccal surfaces of 84 bovine teeth were ground until the dentin was exposed, and 84 nickel-chromium alloy plates cast from a resin model were cemented to the dentin surfaces with 1 of the 3 cements (n = 28). In half of the specimens of each group (n = 14), the bonding surfaces of the nickel-chromium plates received 6 seconds of microsandblasting with 45-µm aluminum oxide particles prior to cementation. The compressive shear bond strengths of the specimens were evaluated in a universal testing machine at E1 and E2 (n = 7). The SARC group showed the greatest bond strength, followed by the RMGIC group, while the bond strength of the ZPC group was significantly lower (P < 0.01). For the RMGIC specimens subjected to microsandblasting, there was a statistically significant difference between the mean bond strengths at E1 and E2 (P = 0.040). All of the other cement and treatment groups showed statistically similar adhesion results at E1 and E2 (P > 0.05). The complementary test by Sidák revealed that the cements Fuji Plus and RelyX U200 showed higher values at E2 and were statistically similar to each other (P > 0.05). Although RMGIC specimens showed a lower initial bond strength than SARC specimens, the fact that the microsandblasted RMGIC subgroup was the only one that demonstrated a significant increase in bond strength with aging suggests that RMGIC can be a material of first choice because it also costs less than SARC.

Pulp treatment for extensive decay in primary teeth.

BACKGROUND: In children, dental caries (tooth decay) is among the most prevalent chronic diseases worldwide. Pulp interventions are indicated for extensive tooth decay. Depending on the severity of the disease, three pulp treatment techniques are available: direct pulp capping, pulpotomy and pulpectomy. After treatment, the cavity is filled with a medicament. Materials commonly used include mineral trioxide aggregate (MTA), calcium hydroxide, formocresol or ferric sulphate.This is an update of a Cochrane Review published in 2014 when insufficient evidence was found to clearly identify one superior pulpotomy medicament and technique. OBJECTIVES: To assess the effects of different pulp treatment techniques and associated medicaments for the treatment of extensive decay in primary teeth. SEARCH METHODS: Cochrane Oral Health's Information Specialist searched the Cochrane Oral Health Group's Trials Register (to 10 August 2017), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2017, Issue 7), MEDLINE Ovid (1946 to 10 August 2017), Embase Ovid (1980 to 10 August 2017) and the Web of Science (1945 to 10 August 2017). OpenGrey was searched for grey literature. The US National Institutes of Health Trials Registry (ClinicalTrials.gov) and the World Health Organization International Clinical Trials Registry Platform were searched for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: We included randomised controlled trials (RCTs) comparing interventions that combined a pulp treatment technique with a medicament or device in children with extensive decay in the dental pulp of their primary teeth. DATA COLLECTION AND ANALYSIS: Two review authors independently extracted data and assessed 'Risk of bias'. We contacted authors of RCTs for additional information when necessary. The primary outcomes were clinical failure and radiological failure, as defined in trials, at six, 12 and 24 months. We performed data synthesis with pair-wise meta-analyses using fixed-effect models. We assessed statistical heterogeneity by using I² coefficients. MAIN RESULTS: We included 40 new trials bringing the total to 87 included trials (7140 randomised teeth) for this update. All were small, single-centre trials (median number of randomised teeth = 68). All trials were assessed at unclear or high risk of bias.The 87 trials examined 125 different comparisons: 75 comparisons of different medicaments or techniques for pulpotomy; 25 comparisons of different medicaments for pulpectomy; four comparisons of pulpotomy and pulpectomy; and 21 comparisons of different medicaments for direct pulp capping.The proportion of clinical failures and radiological failures was low in all trials. In many trials, there were either no clinical failures or no radiographic failures in either study arm.For pulpotomy, we assessed three comparisons as providing moderate-quality evidence. Compared with formocresol, MTA reduced both clinical and radiological failures, with a statistically significant difference at 12 months for clinical failure and at six, 12 and 24 months for radiological failure (12 trials, 740 participants). Compared with calcium hydroxide, MTA reduced both clinical and radiological failures, with statistically significant differences for clinical failure at 12 and 24 months. MTA also appeared to reduce radiological failure at six, 12 and 24 months (four trials, 150 participants) (low-quality evidence). When comparing calcium hydroxide with formocresol, there was a statistically significant difference in favour of formocresol for clinical failure at six and 12 months and radiological failure at six, 12 and 24 months (six trials (one with no failures), 332 participants).Regarding pulpectomy, we found moderate-quality evidence for two comparisons. The comparison between Metapex and zinc oxide and eugenol (ZOE) paste was inconclusive, with no clear evidence of a difference between the interventions for failure at 6 or 12 months (two trials, 62 participants). Similarly inconclusive, there was no clear evidence of a difference in failure between Endoflas and ZOE (outcomes measured at 6 months; two trials, 80 participants). There was low-quality evidence of a difference in failure at 12 months that suggested ZOE paste may be better than Vitapex (calcium hydroxide/iodoform) paste (two trials, 161 participants).Regarding direct pulp capping, the small number of studies undertaking the same comparison limits any interpretation. We assessed the quality of the evidence as low or very low for all comparisons. One trial appeared to favour formocresol over calcium hydroxide; however, there are safety concerns about formocresol. AUTHORS' CONCLUSIONS: Pulp treatment for extensive decay in primary teeth is generally successful. Many included trials had no clinical or radiological failures in either trial arm, and the overall proportion of failures was low. Any future trials in this area would require a very large sample size and follow up of a minimum of one year.The evidence suggests MTA may be the most efficacious medicament to heal the root pulp after pulpotomy of a deciduous tooth. As MTA is relatively expensive, future research could be undertaken to confirm if Biodentine, enamel matrix derivative, laser treatment or Ankaferd Blood Stopper are acceptable second choices, and whether, where none of these treatments can be used, application of sodium hypochlorite is the safest option. Formocresol, though effective, has known concerns about toxicity.Regarding pulpectomy, there is no conclusive evidence that one medicament or technique is superior to another, and so the choice of medicament remains at the clinician's discretion. Research could be undertaken to confirm if ZOE paste is more effective than Vitapex and to evaluate other alternatives.Regarding direct pulp capping, the small number of studies and low quality of the evidence limited interpretation. Formocresol may be more successful than calcium hydroxide; however, given its toxicity, any future research should focus on alternatives.

Effect of Resin Luting Systems and Alumina Particle Air Abrasion on Bond Strength to Zirconia.

This study aimed to evaluate the effect of different primer/resin luting agent combinations and alumina air abrasion on the adhesion to zirconia. Eighty blocks (4×4×3 mm) of Lava Frame Zirconia (3M ESPE) were produced and randomly assigned into eight groups (n=10) according to two zirconia surface treatments (untreated or air abrasion with 50-µm alumina particles) and four luting systems (SU: Scotchbond Universal/RelyX Unicem 2; ZP: Z-Prime Plus/Duo-link Universal; MB: Monobond Plus/Variolink II; and AP: Alloy Primer/ED Primer II/Panavia F 2.0). After the conditioning and primer applications, resin luting agents were manipulated and applied on the zirconia, using a matrix, to form a cylinder (2 mm in diameter×2 mm high), followed by photoactivation for 40 seconds. After that, the specimens were stored in distilled water (37 °C) for 120 days and then submitted to shear bond strength testing, followed by failure mode evaluation under an optical microscope (30×). A two-way analysis of variance and Tukey test (α=0.05) were used for data analysis. Alumina air abrasion (Al) promoted higher bond values for the three luting systems, except for SU, which showed the best results without air abrasion, while with air abrasion, Al-SU, Al-ZP, and Al-MB presented higher values compared to Al-AP. We concluded that the alumina air abrasion of zirconia surfaces seemed to be dispensable for the SU group, while air abrasion (topographical alterations) enhanced the adhesion of the ZP, MB, and AP groups.

Evaluation of Microleakage by Gas Permeability and Marginal Adaptation of MTA and BiodentineTM Apical Plugs: In Vitro Study / Evaluación de la microfiltración por permeabilidad de gas y adaptación marginal de tapones apicales de MTA y BiodentineTM: Estudio in vitro

Abstract The endodontic treatment of teeth with incomplete development is always a complex task. Nowadays, biomaterials such as bioceramics offers promising clinical evidence that supports its use. However, the standardization of its use for apexification purpose still needs a deeper understanding of the materials' behavior. The aim of this investigation was to evaluate the marginal adaptability and microleakage by gas permeability of MTA and Biodentine™ apical plugs in an in vitro model. Materials and methods: Twenty- four single rooted human teeth were selected according to previously stablished inclusion criteria. All samples were prepared obtaining standard cylindrical internal canals with a diameter of 1.3 mm. Root canals were gently rinsed using 5.25% sodium hypochlorite and EDTA 17%. The apical 3mm and remaining coronal dental structure were sectioned to obtain 10mm roots. Roots were randomly assigned to 3 different groups as follows: GROUP A: MTA (n=10), GROUP B: Biodentine™ (n=10) and Group C: Control (positive n=1, negative n=3). MTA and Biodentine™ were prepared according to manufacturer's indications, and apical plugs of 4mm were passively placed in the correspondent teeth. All samples were stored in saline solution for 7 days at 37°C before evaluation. Samples were mounted in cylindrical sample-holders using epoxy resin. Microleakage was evaluated with an automatic permeability detector that calculates nitrogen diffusion between the material-root interphase. After microleakage evaluation, the samples were recovered and analyzed by scanning electron microscopy (SEM). Microleakage results were analyzed using Chi-square and adaptation was evaluated with a descriptive analysis. Results: None of the evaluated materials completely avoided the nitrogen microleakage (positive leakage of 10% and 20% of samples for MTA and Biodentine™ respectively); with no statistical significant difference between groups (p=0.527). All apical plugs showed good adaptation under SEM, at 30x, 200x, 1000x and 2500x; with microscopical structures similar to previous reports. Conclusions: Both bioceramics behave similar when used as apical barriers to avoid permeability, with acceptable marginal adaptation. Further in vivo studies are needed to validate these results.

Resumen El tratamiento endodóntico de dientes con desarrollo incompleto es siempre una tarea compleja. Hoy en día, biomateriales como las biocerámicas ofrecen una evidencia clínica prometedora que apoya su uso. Sin embargo, la estandarización de su uso para fines de apexificación todavía necesita una comprensión más profunda del comportamiento de los materiales. El objetivo de esta investigación fue evaluar la adaptabilidad marginal y microfiltración por permeabilidad de gas de los tapones apicales de MTA y Biodentine™ en un modelo in vitro. Materiales y métodos: Veiticuatro dientes humanos uniradiculares fueron seleccionados meticulosamente según criterios de inclusión previamente establecidos. Todas las muestras fueron preparadas con canales cilíndricos internos estandarizados de 1,3 mm de diámetro. Los conductos radiculares fueron gentilmente lavados con hipoclorito de sodio al 5,25% y EDTA al 17%. La estructura dental apical de 3 mm y la coronal restante se seccionó para obtener raíces de 10 mm de longitud. Las raíces se asignaron aleatoriamente a 3 grupos diferentes de la siguiente manera: GRUPO A: MTA (n = 10), GRUPO B: Biodentine™ (n = 10) y Grupo C: Control (n = 1 positivo, n = 3 negativos). El MTA y Biodentine™ se prepararon de acuerdo con las indicaciones de los fabricantes, y se colocaron pasivamente los tapones apicales de 4 mm en los dientes correspondientes. Todas las muestras se almacenaron en solución salina durante 7 días a 37ºC antes de la evaluación. Las muestras se montaron en porta-muestras cilíndricos utilizando resina epóxica. La microfiltración se evaluó con un detector de permeabilidad automática que calcula la difusión de nitrógeno entre la interfase material-raíz. Después de la evaluación de microfiltración, las muestras fueron recuperadas y analizadas por microscopía electrónica de barrido (SEM). Los resultados de microfiltración se analizaron utilizando una prueba estadística de Chi-cuadrado y la adaptación se evaluó con un análisis descriptivo. Resultados: Ninguno de los materiales evaluados evitó completamente la microfiltración de nitrógeno (fuga positiva de 10% y 20% de muestras para MTA y Biodentine™, respectivamente); sin diferencias estadísticamente significativas entre los grupos (p = 0,527). Todos los tapones apicales mostraron una buena adaptación bajo SEM, a 30x, 200x, 1000x y 2500x; con morfologías similares a las previamente reportadas. Conclusiones: ambas biocerámicas se comportan de forma similar cuando se usan como barreras apicales para evitar la permeabilidad de gas, con adaptación marginal aceptable. Se necesitan más estudios in vivo para validar estos resultados.

Agregado trióxido mineral y cemento pórtland expuestos a irrigantes endodóncicos: pH, conductividad y solubilidad / Mineral trioxide aggregate and portland cement exposed to endodontic irrigants: pH, conductivity, and solubility

Objetivo: El objetivo de este estudio fue determinar, el pH, la conductividad y la solubilidad al someter el agregado trióxido mineral (MTA) y el cemento Pórtland (CP) a diferentes irrigantes utilizados en endodoncia. Material y Métodos: Se estudiaron un total de 210 muestras, 105 de cemento ProRoot MTA(R) blanco y 105 de CP blanco. Se seleccionaron los siguientes irrigantes: hipoclorito sódico al 2,5% y al 5%, ácido cítrico al 10% y al 20%, clorhexidina al 2%, EDTA al 17%, y suero fisiológico como control. Se expusieron 15 muestras de MTA y 15 de CP a cada tipo de irrigante. Se midieron los resultados a 1, 5, 15, 30 y 60 minutos. Resultados: La mayoría de cambios del pH y la conductividad fueron de pequeña magnitud, aunque estadísticamente significativos. Destacan la alcalinización del suero fisiológico y la acidificación del hipoclorito sódico. Con MTA disminuye la conductividad en hipoclorito sódico y aumenta la conductividad en EDTA. Con CP hubo una mayor pérdida de conductividad del hipoclorito sódico y del ácido cítrico. Todas las muestras disminuyeron el peso considerablemente después de la exposición a cualquiera de los irrigantes, y en general ésta fue mayor para el CP que el MTA. Conclusiones: El contacto del material de reparación con los irrigantes utilizados habitualmente en endodoncia altera poco el pH y la conductividad pero aumenta marcadamente su solubilidad. Estos cambios afectan menos al MTA que al CP

Objective. The aim of this study was to determine changes to pH, conductivity, and solubility when mineral trioxide aggregate (MTA) and Portland cement (PC) are exposed to different endodontic irrigants. Methods. The study included a total of 210 samples, 105 white ProRoot MTA® cement and 105 white PC cement. The following irrigants were tested: 2.5% and 5% sodium hypochlorite, 10% and 20% citric acid, 2% chlorhexidine, 17% ethylenediamine tetra-acetic acid (EDTA), and physiological serum as a control. Fifteen samples of each material were exposed to each irrigant. PH, conductivity, and solubility were measured at baseline and after 1, 5, 15, 30 and 60 minutes exposure to irrigants. Results. Most changes in pH and conductivity were of small magnitude, although statistically significant. For MTA and PC physical serum produced alkalinization, while sodium hypochlorite produced acidification. MTA lost conductivity when exposed to sodium hypochlorite but this increased with exposure to EDTA. PC underwent greater losses of conductivity when exposed to sodium hypochlorite and citric acid. All samples decreased in weight significantly after exposure to any of the irrigants, and the loss was generally greater for PC than MTA. Conclusions. When repair materials are exposed to the irrigants normally used in endodontics, pH levels and conductivity alter slightly, while solubility increases markedly. These effects were greater for PC than MTA

Rugosidad superficial del agregado de trióxido mineral y el cemento pórtland expuestos a irrigantes endodóncicos / Surface roughness of the mineral trioxide aggregate and Portland cement exposed to endodontic irrigants

Objetivo: El propósito de este estudio fue determinar la rugosidad superficial, al someter al agregado de trióxido mineral (MTA) y al cemento Pórtland (CP) a diferentes irrigantes utilizados en endodoncia. Material y Métodos: Se estudiaron un total de 210 muestras, 105 de cemento ProRoot MTA® blanco y 105 de CP blanco. Se seleccionaron los siguientes irrigantes: hipoclorito sódico al 2,5% y al 5%, ácido cítrico al 10% y al 20%, clorhexidina al 2%, EDTA al 17%, y suero fisiológico como control. Se expusieron 15 muestras de cada cemento por cada tipo de irrigante durante 15 minutos. El estudio de la rugosidad superficial se hizo con el microscopio Leica DCM 3D que permite una perfilometría con tecnología dual confocal e interferométrica. Se evaluó la rugosidad media (Ra), el valor cuadrático medio (RMS) y la profundidad de rugosidad máxima (PV) al inicio y a los 15 minutos de la inmersión de las muestras. Resultados: El CP aumentó significativamente la rugosidad en los parámetros Ra y RMS tras la irrigación con hipoclorito al 2,5%, ácido cítrico al 10% y al 20%, y suero fisiológico. En términos de PV el CP solo aumentó la rugosidad tras la irrigación con ácido cítrico al 20% y suero fisiológico. El MTA no mostró cambios significativos respecto a la rugosidad Ra, RMS y PV con ninguno de los irrigantes. Conclusiones: La rugosidad superficial del CP puede modificarse por la exposición a alguno de los irrigantes utilizados en endodoncia, mientras que la rugosidad del MTA no se modifica significativamente

Objectives: This study set out to determine changes to surface roughness when mineral trioxide aggregate (MTA) and Portland cement (PC) are exposed to the different irrigants used in endodontics. Material and Methods: The study included a total of 210 samples, 105 white ProRoot MTA® cement and 105 white PC cement. The following irrigants were tested: 2.5% and 5% sodium hypochlorite, 10% and 20% citric acid, 2% chlorhexidine, 17% ethylenediamine tetra-acetic acid (EDTA), and physiological serum as a control. Fifteen samples of each material were exposed to each irrigant for 15 minutes. Surface roughness evaluation was performed using a Leica DCM 3D microscope for dual system (confocal and interferometric) profilometry. Mean roughness (Ra), root mean square (RMS) and maximum roughness depth (PV) were evaluated before and after 15 minutes sample immersion in each irrigant. Results: PC significantly increased roughness for Ra and RMS parameters after irrigation with 2.5% sodium hypochlorite, 10% and 20% citric acid, and physiological serum. PC underwent an increase in the PV parameter after immersion in 20% citric acid and physiological serum. MTA did not show significant changes in Ra, RMS or PV with any of the irrigants. Significance. The surface roughness of PC may be modified by exposure to some of the irrigants used in endodontics, while the roughness of MTA is not modified significantly

Improvement of physical properties of calcium phosphate cement by elastin-like polypeptide supplementation.

Calcium phosphate cements (CPCs) are synthetic bioactive cements widely used as hard tissue substitutes. Critical limitations of use include their poor mechanical properties and poor anti-washout behaviour. To address those limitations, we combined CPC with genetically engineered elastin-like polypeptides (ELPs). We investigated the effect of the ELPs on the physical properties and biocompatibility of CPC by testing ELP/CPC composites with various liquid/powder ratios. Our results show that the addition of ELPs improved the mechanical properties of the CPC, including the microhardness, compressive strength, and washout resistance. The biocompatibility of ELP/CPC composites was also comparable to that of the CPC alone. However, supplementing CPC with ELPs functionalized with octaglutamate as a hydroxyapatite binding peptide increased the setting time of the cement. With further design and modification of our biomolecules and composites, our research will lead to products with diverse applications in biology and medicine.

Influence of Surface Treatment on Composite Adhesion in Noncarious Cervical Lesions: Systematic Review and Meta-analysis.

The purpose of this study was to analyze the influence of dentin surface treatments on the retention rate of resin composite restorations in non-carious cervical lesions (NCCLs). Seven randomized clinical trials were included in this review. Data regarding retention rate, type of surface treatment, and the main characteristics of studies were analyzed. Two reviewers performed a literature search up to December 2016 in eight databases: PubMed (Medline), Lilacs, Ibecs, Web of Science, BBO, Scopus, Scielo and The Cochrane Library. Only clinical trials evaluating dentin surface treatments in resin composite restoration in NCCLs were included. Noncontrolled clinical trials, reviews, editorial letters, case reports, case series and studies published in a language other than English, Portuguese, or Spanish were not included. The included studies evaluated different surface treatments, such as using an adhesive system with a frictional technique, drying the dentin, and removing sclerotic dentin by using a bur and applying EDTA before primer use. The analysis considering the mechanical removal of dentin surface with a bur and the application of an adhesive system in a frictional mode showed these treatments improved retention rates of the resin composite restorations in NCCLs ( p<0.05). There is evidence in the literature suggesting that the mechanical removal of dentin surface with a bur and the application of an adhesive system in a frictional mode could improve the retention rates of resin composite restorations in NCCLs. However, the studies showed high heterogeneity, and additional clinical trials are needed to determine the best dentin treatment option in NCCLs.

Assessment of Coronal Leakage of Temporary Restorations in Root Canal-treated Teeth: An in vitro Study.

INTRODUCTION: Coronal leakage is one of the constant concerns in routine dental practice. It is one of the factors responsible for the failure of root canal therapy. Permanent restorations should be given as soon as possible after the completion of root canal therapy. If unavoidable, provisional restoration should be given in such a way that it maximally reduced the leakage of microorganisms and fluids from the external environment into the canal space. Hence, we evaluated the effect of saliva on the coronal leakage of temporary restorations. MATERIALS AND METHODS: Biomechanical preparation of the root canals of 204 fresh mandibular first premolar teeth was done using endodontic files with intermittent irrigation of sodium hypochlorite solution and ethylenediaminetetraacetic acid. Alternate irrigation with normal saline was done periodically. After preparation, drying of the canals was done using paper points followed by sealing of the apical foramen. For the assessment of the microleakage, Siqueira et al apparatus and method was used. All the specimens were divided into four groups based on the provisional restorative material used. All the groups were further divided into three subgroups based on the presence and absence of intracanal medicaments. Verissimo et al's criteria were used to check the turbidity at 1-, 2-, 3-, and 4-week interval respectively. All the results were analyzed by Statistical Package for the Social Sciences (SPSS) software. Chi-square test was used to measure the level of significance, and p < 0.05 was considered to be significant. RESULTS: In group I, all the subgroups' specimens showed significant difference at 1 week's time. Only the subgroup with no intracanal medicaments in Cavit-containing provisional restoration showed nonsignificant alterations. Statistically significant alterations were seen at 1, 2, and 3 weeks' interval in all the subgroups except for one with intracanal medicaments. CONCLUSION: All the temporary restorative materials were not able to prevent microleakage after 1 week's time, with worst bacterial resistance shown by Ketac Molar and ionomer restorative material. Future studies are advocated for better prognosis of root canal therapy.

Regenerative Endodontic Treatment versus Apical Plug in Immature Teeth: Three-Year Follow-Up.

This report compares and evaluates the treatment outcomes of regenerative endodontic treatment and apical plug as two accepted treatment protocols in a pair of necrotic immature maxillary central incisors of a 12-year old female. The patient was referred complaining of a dull pain and swelling in her upper lip area. She had a history of trauma to the anterior maxilla two years earlier. Both teeth were clinically diagnosed with pulp necrosis and periapical radiographs revealed that separate periapical radiolucent lesions surrounded the immature apices of both teeth. The left and right incisors were treated with apical plug and regenerative endodontic treatment, respectively, using calcium-enriched mixture (CEM) cement. The patient was followed-up for three years. During this period, both teeth were clinically asymptomatic and showed complete radiographic healing of the periapical lesions. The right central incisor showed root development. No tooth discoloration was evident. Apexification by apical plug placement and pulp regeneration are both reliable treatments for immature non-vital teeth. In order to choose the right treatment the advantages of either technique should be weighed against its drawbacks. CEM cement can be successfully applied for both purposes. This biomaterial causes less discoloration of the tooth.

Aluminum Oxide Sandblasting of Hexagonal Coping and Abutment: Influence on Retention and Marginal Leakage Using Temporary Cements.

PURPOSE: To compare the tensile strength and marginal leakage of prefabricated abutments/copings, with or without surface sandblasting with aluminum oxide, luted with a calcium hydroxide-based temporary cement (CH, Dycal; Dentsply, Petrópolis, RJ, Brazil) or a noneugenol zinc oxide cement (ZO, Temp Bond NE; Kerr, Orange, CA). MATERIALS AND METHODS: A total of 48 CeraOne abutment analogs and respective copings were divided into 6 groups (n = 8) according to the component that was sandblasted: the coping only, coping + abutment or no sandblasting and the temporary cement used: CH or ZO. After cementation, the samples underwent 500 thermal cycles (5°C ± 2°C and 55°C ± 2°C) and were subsequently immersed in an aqueous solution of 0.5% basic fuchsine dye for 24 hours. Next, the tensile test was performed, and microleakage was assessed qualitatively. Data were analyzed using Mann-Whitney, Kruskal-Wallis tests, followed by the Student-Newman-Keuls test (α = 0.05). RESULTS: CH cement showed a tensile strength (245.6 N) significantly higher than that of the ZO (18.1 N). Sandblasting both abutment and coping increased tensile strength by 1.7 times. Marginal leakage was not influenced by sandblasting; however, CH presented less microleakage. CONCLUSION: Aluminum oxide sandblasting of the coping and abutment favored the tensile strength of temporary cements and the CH showed a higher tensile strength and less microleakage than did the ZO cement.

Influence of irrigation protocols on the bond strength of fiber posts cemented with a self-adhesive luting agent 24 hours after endodontic treatment.

The aim of this in vitro study was to evaluate the influence of different irrigation protocols on the bond strength, at different root depths, of fiber posts cemented with a self-adhesive cement 24 hours after endodontic treatment. Fifty-six bovine incisor roots were endodontically prepared and separated into 7 groups (n = 8) according to irrigation protocols: group 1, sterile saline (control); group 2, chlorhexidine (CHX) gel 2% and saline; group 3, sodium hypochlorite (NaOCl) 5.25% and saline; group 4, CHX and saline (final irrigation with ethylenediaminetetraacetic acid [EDTA] 17%); group 5, NaOCl and saline (final irrigation with EDTA); group 6, CHX and saline (final irrigation with NaOCl and EDTA); and group 7, NaOCl (final irrigation with CHX and EDTA). No statistically significant difference was found among the groups. Within the limitations of this study, it can be concluded that the different irrigation protocols did not influence the bond strength of self-adhesive resin cement, which presented similar behaviors at the 3 root depths studied.

Effect of EDTA conditioning on cervical restorations bonded with a self-etch adhesive: A randomized double-blind clinical trial.

OBJECTIVE: To compare the 18-month retention rates of composite restorations in non-carious cervical lesions [NCCLs] bonded with a self-etch adhesive with and without preliminary conditioning with EDTA. METHODS: Forty-eight patients with two similar-sized NCCL were selected and randomly allocated to one of two groups. Two calibrated operators placed 96 restorations with a one-step self-etch adhesive (Adper Easy One, 3M ESPE). Half of the restorations were placed according to the manufacturer's instructions while, for the other half, the surfaces of the lesions were conditioned with 17% EDTA for 2 min prior to adhesive application. Two blinded and independent examiners evaluated the restorations at baseline, 6, 12, and 18 months, according to the FDI criteria. The comparison between groups in each period was conducted with the Fisher's exact test, and the performance of each group at the different periods was evaluated by McNemar's test (α=0.05). RESULTS: After 18 months, significantly higher retention rates (95% CI) were observed for the EDTA group (95.5 [84.9-98.7]) than the control group (79.6% [65.5-88.9]) (p=0.02). Significant deterioration of the marginal adaptation and marginal discoloration were observed for both groups over the 18-month evaluation. CONCLUSIONS: The preliminary conditioning with EDTA before application of a one-step self-etch adhesive significantly improved the retention rates of composite restorations in cervical lesions. CLINICAL SIGNIFICANCE: Conditioning with EDTA is an alternative that improves the 18-month retention rate of cervical restorations bonded with a self-etch adhesive.

Pulp treatment for extensive decay in primary teeth.

BACKGROUND: In children, dental caries is among the most prevalent chronic diseases worldwide. Pulp interventions are indicated for extensive tooth decay. Depending on the severity of the disease, three pulp treatment techniques are available: direct pulp capping, pulpotomy and pulpectomy. After treatment, the cavity is filled with a medicament.This is an update of a Cochrane review first published in 2003. The previous review found insufficient evidence regarding the relative efficacy of these interventions, combining one pulp treatment technique and one medicament. OBJECTIVES: To assess the effects of different pulp treatment techniques and associated medicaments for the treatment of extensive decay in primary teeth. SEARCH METHODS: We searched the Cochrane Oral Health Group's Trials Register (to 25 October 2013), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2013, Issue 9), MEDLINE via OVID (1946 to 25 October 2013), EMBASE via OVID (1980 to 25 October 2013) and the Web of Science (1945 to 25 October 2013). We searched OpenGrey for grey literature and the US National Institutes of Health Trials Register and the World Health Organization (WHO) Clinical Trials Registry Platform for ongoing trials. We placed no restrictions on the language or date of publication when searching the electronic databases. SELECTION CRITERIA: Eligible studies were randomised controlled trials comparing different pulp interventions combining a pulp treatment technique and a medicament in children with extensive decay involving dental pulp in primary teeth. DATA COLLECTION AND ANALYSIS: Two review authors independently carried out data extraction and risk of bias assessment in duplicate. We contacted authors of randomised controlled trials for additional information if necessary. The primary outcomes were clinical failure and radiological failure, as defined in trials, at six, 12 and 24 months. We performed data synthesis with pairwise meta-analyses using fixed-effect models. We assessed statistical heterogeneity using by I(2) coefficients. MAIN RESULTS: We included 47 trials (3910 randomised teeth) compared to three trials in the previous version of the review published in 2003. All trials were single centre and small sized (median number of randomised teeth 68). Overall, the risk of bias was low in only one trial with all other trials being at unclear or high risk of bias. The overall quality of the evidence was low. The 47 trials examined 53 different comparisons: 25 comparisons between different medicaments/techniques for pulpotomy, 13 comparisons between different medicaments for pulpectomy, 13 comparisons between different medicaments for direct pulp capping and two comparisons between pulpotomy and pulpectomy. Regarding pulpotomy, 14 trials compared mineral trioxide aggregate (MTA) with formocresol (FC). MTA reduced both clinical and radiological failures at six, 12 and 24 months, although the difference was not statistically significant. MTA also showed favourable results for all secondary outcomes measured, although again, differences between MTA and FC were not statistically significant (with the exception of pathological root resorption at 24 months and dentine bridge formation at six months). MTA showed favourable results compared with calcium hydroxide (CH) (two trials) for all outcomes measured, but the differences were not statistically significant (with the exception of radiological failure at 12 months). When comparing MTA with ferric sulphate (FS) (three trials), MTA had statistically significantly fewer clinical, radiological and overall failures at 24 months. This difference was not shown at six or 12 months.FC was compared with CH in seven trials and with FS in seven trials. There was a statistically significant difference in favour of FC for clinical failure at six and 12 months, and radiological failure at six, 12 and 24 months. FC also showed favourable results for all secondary outcomes measured, although differences between FC and CH were not consistently statistically significant across time points. The comparisons between FC and FS showed no statistically significantly difference between the two medicaments for any outcome at any time point.For all other comparisons of medicaments used during pulpotomies, pulpectomies or direct pulp capping, the small numbers of studies and the inconsistency in results limits any interpretation. AUTHORS' CONCLUSIONS: We found no evidence to identify one superior pulpotomy medicament and technique clearly. Two medicaments may be preferable: MTA or FS. The cost of MTA may preclude its clinical use and therefore FS could be used in such situations. Regarding other comparisons for pulpectomies or direct pulp capping, the small numbers of studies undertaking the same comparison limits any interpretation.

Capping a pulpotomy with calcium aluminosilicate cement: comparison to mineral trioxide aggregates.

INTRODUCTION: Calcium aluminate cements have shown little affinity for bacterial growth, low toxicity, and immunogenicity when used as a restoration material, but calcium aluminate cements have not been tested in vivo in pulpotomy procedures. METHODS: To address this question, a calcium aluminosilicate cement (Quick-Set) was tested along with 2 mineral trioxide aggregates, ProRoot MTA and MTA Plus. These cements were used as a capping agent after pulpotomy. Control rats had no pulpotomy, or the pulpotomy was not capped. Proinflammatory cytokines interleukin (IL)-1ß and IL-1α were measured, and histology was performed at 30 and 60 days after capping. The nociceptive response was determined by measuring the lengthening of the rat's meal duration. RESULTS: and CONCLUSIONS: IL-1ß and IL-1α concentrations were reduced in the capped teeth, but no differences were observed among the 3 cements. Dentinal bridging could be detected at both 30 and 60 days with each of the 3 cements, and the pulps were still vital 60 days after capping. Meal duration significantly shortened after placement of the 3 different cements, indicating a nociceptive response, but there were no differences among the materials. Calcium aluminosilicate cement had similar properties to mineral trioxide aggregates and is a viable option for pulpotomy procedures.

Microhardness and sealing ability of materials used for root canal perforations.

Root perforations may lead to a loss of integrity in the root and periodontium, violations of the biologic periodontal distance, and injuries to periodontal tissue. This study sought to analyze the effect of root canal biomechanical preparation on the microhardness and the marginal sealing ability of different materials used to treat root perforations. Standard root perforations were performed in 96 bovine incisors. The teeth were divided into four groups (n = 24), based on the material used to treat those teeth: Mineral trioxide aggregate (MTA) (Group 1), MTA protected with cyanoacrylate (Group 2), MTA protected with glass ionomer (GI) cement (Group 3), and castor oil bean (COB) cement (Group 4). After root perforations were closed, the root canals were prepared biomechanically and teeth were sectioned longitudinally. Microleakage and microhardness of sealed perforations were assessed; microleakage data were submitted to analysis of variance (ANOVA) testing, while microhardness data were submitted to Dunnet and Tukey tests (p < 0.05). Group 4 reported the lowest amount of microleakage (0.65 mm), followed by Group 3 (1.02 mm), Group 1 (1.14 mm), and Group 2 (1.30 mm); however, no difference was detected among the groups. Groups 1-3 demonstrated significantly higher microhardness values compared to COB. It was concluded that the chemical and mechanical agents used during root canal preparation did not affect the sealing procedures. Administering surface protection to MTA did not improve microhardness or sealing.

Portland cement with additives in the repair of furcation perforations in dogs.

PURPOSE: To evaluate the use of Portland cements with additives as furcation perforation repair materials and assess their biocompatibility. METHODS: The four maxillary and mandibular premolars of ten male mongrel dogs (1-1.5 years old, weighing 10-15 kg) received endodontic treatment (n=80 teeth). The furcations were perforated with a round diamond bur (1016 HL). The perforations involved the dentin, cementum, periodontal ligament, and alveolar bone. A calcium sulfate barrier was placed into the perforated bone to prevent extrusion of obturation material into the periradicular space. The obturation materials MTA (control), white, Type II, and Type V Portland cements were randomly allocated to the teeth. Treated teeth were restored with composite resin. After 120 days, the animals were sacrificed and samples containing the teeth were collected and prepared for histological analysis. RESULTS: There were no significant differences in the amount of newly formed bone between teeth treated with the different obturation materials (p=0.879). CONCLUSION: Biomineralization occurred for all obturation materials tested, suggesting that these materials have similar biocompatibility.

Portland cement with additives in the repair of furcation perforations in dogs / Cimento Portland com aditivos na reparação de perfurações radiculares em cães

PURPOSE: To evaluate the use of Portland cements with additives as furcation perforation repair materials and assess their biocompatibility. METHODS: The four maxillary and mandibular premolars of ten male mongrel dogs (1-1.5 years old, weighing 10-15 kg) received endodontic treatment (n=80 teeth). The furcations were perforated with a round diamond bur (1016 HL). The perforations involved the dentin, cementum, periodontal ligament, and alveolar bone. A calcium sulfate barrier was placed into the perforated bone to prevent extrusion of obturation material into the periradicular space. The obturation materials MTA (control), white, Type II, and Type V Portland cements were randomly allocated to the teeth. Treated teeth were restored with composite resin. After 120 days, the animals were sacrificed and samples containing the teeth were collected and prepared for histological analysis. RESULTS: There were no significant differences in the amount of newly formed bone between teeth treated with the different obturation materials (p=0.879). CONCLUSION: Biomineralization occurred for all obturation materials tested, suggesting that these materials have similar biocompatibility.

OBJETIVO: Avaliar o uso de cimentos Portland aditivados na reparação de perfurações radiculares e a biocompatibilidade destes materiais. MÉTODOS: Oitenta pré-molares, quatro da arcada dentária superior e quatro da arcada inferior de 10 cães machos, sem raça definida, com idade em torno de um a um ano e meio, pesando entre 10 e 15 kg foram submetidos a tratamento endodôntico, sendo realizadas perfurações nas furcas com broca de diamante 1016 HL. A cavidade envolveu dentina e cemento, como também periodonto e o osso alveolar. Na porção óssea da obturação, barreira de sulfato de cálcio foi utilizada evitando extravasamento do cimento para o espaço periodontal. Foi realizada a distribuição randomizada dos cimentos MTA (controle), Portland tipo II, Portland tipo V e Portland branco estrutural nas obturações. Os dentes foram restaurados com resina composta. Após 120 dias realizou-se eutanásia, retirada dos dentes, preparação e análise histológica. RESULTADOS: Entre os cimentos não houve diferença estatística significante quanto à neoformação óssea (p=0,879). CONCLUSÃO: Ocorreu biomineralização com os diferentes cimentos usados no estudo, sugerindo que estes são similares em termos de biocompatibilidade.

Persistence of resinous cement residues in dentin treated with different chemical removal protocols.

The aim of this study was to evaluate the persistence of resin cement residues after dentin surface cleaning with different alcohol-based solutions or an essential oil (eucalyptol). Forty bovine teeth were sectioned in order to expose pulp chamber dentin to be washed with 1.0 mL of 2.5% sodium hypochlorite (NaOCl), followed by 0.1 mL of 17% EDTA application for 3 min, and final irrigation with 2.5% NaOCl. The specimens were air dried and resin-based cement was rubbed onto the dentine surface with a microbrush applicator. After 15 min, the surface was scrubbed with a cotton pellet and moistened with different dentin cleaning solutions, compounding the following groups: G1--95% ethanol, G2--70% ethanol, G3--70% isopropyl alcohol, or G4--eucalyptol. The dentin was scrubbed until the cement residues could not be visually detected. Sections were then processed for SEM and evaluated at × 500 magnification. Scores were attributed to each image according to the area covered by residual sealer, and data were subjected to Kruskal-Wallis at 5% significance. Eucalyptol promoted the most adequate dentin cleaning, although no statistical difference was detected amongst the groups (P > 0.05), except between the eucalyptol and 70% ethanol groups (P < 0.05). All the evaluated dentin cleaning solutions were unable to completely remove the cement residues from the dentin surface.