RESUMEN
Amide-based organic cage cavities are, in principle, ideal enzyme active site mimics. Yet, cage-promoted organocatalysis has remained elusive, in large part due to synthetic accessibility of robust and functional scaffolds. Herein, we report the acyl transfer catalysis properties of robust, hexaamide cages in organic solvent. Cage structural variation reveals that esterification catalysis with an acyl anhydride acyl carrier occurs only in bifunctional cages featuring internal pyridine motifs and two crucial antipodal carboxylic acid groups. 1H NMR data and X-ray crystallography show that the acyl carrier is rapidly activated inside the cavity as a covalent mixed-anhydride intermediate with an internal hydrogen bond. Michaelis-Menten (saturation) kinetics suggest weak binding (KM = 0.16 M) of the alcohol pronucleophile close to the internal anhydride. Finally, activation and delivery of the alcohol to the internal anhydride by the second carboxylic acid group forms ester product and releases the cage catalyst. Eyring analysis indicates a strong enthalpic stabilization of the transition state (5.5 kcal/mol) corresponding to a rate acceleration of 104 over background acylation, and an ordered, associative rate-determining attack by the alcohol, supported by DFT calculations. We conclude that internal bifunctional organocatalysis specific to the cage structural design is responsible for the enhancement over the background reaction. These results pave the way for organic-phase enzyme mimicry in self-assembled cavities with the potential for cavity elaboration to enact selective acylations.
RESUMEN
Integrating symmetry-reducing methods into self-assembly methodology is desirable to efficiently realise the full potential of molecular cages as hosts and catalysts. Although techniques have been explored for metal organic (coordination) cages, rational strategies to develop low symmetry organic cages remain limited. In this article, we describe rules to program the shape and symmetry of organic cage cavities by designing edge pieces that bias the orientation of the amide linkages. We apply the rules to synthesise cages with well-defined cavities, supported by evidence from crystallography, spectroscopy and modelling. Access to low-symmetry, self-assembled organic cages such as those presented, will widen the current bottleneck preventing study of organic enzyme mimics, and provide synthetic tools for novel functional material design.
RESUMEN
A series of mixed ligand, photoluminescent organometallic Ir(III) complexes have been synthesized to incorporate substituted 2-phenyl-1H-naphtho[2,3-d]imidazole cyclometalating ligands. The structures of three example complexes were categorically confirmed using X-ray crystallography each sharing very similar structural traits including evidence of interligand hydrogen bond contacts that account for the shielding effects observed in the 1H NMR spectra. The structural iterations of the cyclometalated ligand provide tuning of the principal electronic transitions that determine the visible absorption and emission properties of the complexes: emission can be tuned in the visible region between 550 and 610 nm and with triplet lifetimes up to 10 µs. The nature of the emitting state varies across the series of complexes, with different admixtures of ligand-centered and metal-to-ligand charge transfer triplet levels evident. Finally, the use of the complexes as photosensitizers in triplet-triplet annihilation energy upconversion (TTA-UC) was investigated in the solution state. The study showed that the complexes possessing the longest triplet lifetimes showed good viability as photosensitizers in TTA-UC. Therefore, the use of an electron-withdrawing group on the 2-phenyl-1H-naphtho[2,3-d]imidazole ligand framework can be used to rationally promote TTA-UC using this class of complex.
RESUMEN
A series of ligands based upon a 1,3-diimino-isoindoline framework have been synthesized and investigated as pincer-type (Nâ§Nâ§N) chelates for Pt(II). The synthetic route allows different combinations of heterocyclic moieties (including pyridyl, thiazole, and isoquinoline) to yield new unsymmetrical ligands. Pt(L1-6)Cl complexes were obtained and characterized using a range of spectroscopic and analytical techniques: 1H and 13C NMR, IR, UV-vis and luminescence spectroscopies, elemental analyses, high-resolution mass spectrometry, electrochemistry, and one example via X-ray crystallography which showed a distorted square planar environment at Pt(II). Cyclic voltammetry on the complexes showed one irreversible oxidation between +0.75 and +1 V (attributed to Pt2+/3+ couple) and a number of ligand-based reductions; in four complexes, two fully reversible reductions were noted between -1.4 and -1.9 V. Photophysical studies showed that Pt(L1-6)Cl absorbs efficiently in the visible region through a combination of ligand-based bands and metal-to-ligand charge-transfer features at 400-550 nm, with assignments supported by DFT calculations. Excitation at 500 nm led to luminescence (studied in both solutions and solid state) in all cases with different combinations of the heterocyclic donors providing tuning of the emission wavelength around 550-678 nm.
RESUMEN
Six iridium(iii) complexes of the general form [Ir(C^N)2(N^N)]X (where C^N = cyclometalating ligand; N^N = disubstituted 2,2'-bipyridine), and incorporating alkyl chains of differing lengths (C8, C10, C12), have been synthesised and characterised. The complexes have been characterised using a variety of methods including spectroscopies (NMR, IR, UV-Vis, luminescence) and analytical techniques (high resolution mass spectrometry, cyclic voltammetry, X-ray diffraction). Two dodecyl-functionalised complexes were studied for their behaviour in aqueous solutions. Although the complexes did not possess sufficient solubility to determine their critical micelle concentrations (CMC) in water, they were amenable for use as emissive dopants in a N-methyl C12 substituted imidazolium salt microemulsion carrier system with a CMC = 36.5 mM. The investigation showed that the metal doped microemulsions had increased CMCs of 40.4 and 51.3 mM and luminescent properties characterised by the dopant.
RESUMEN
Two substituted phosphonium tetrahydoxidohexaoxidopentaborate(1-) salts, [iPrPPh3][B5O6(OH)4]·3.5H2O (1) and [MePPh3][B5O6(OH)4]·B(OH)3·0.5H2O (2), were prepared by templated self-assembly processes with good yields by crystallization from basic methanolic aqueous solutions primed with B(OH)3 and the appropriate phosphonium cation. Salts 1 and 2 were characterized by spectroscopic (NMR and IR) and thermal (TGA/DSC) analysis. Salts 1 and 2 were thermally decomposed in air at 800 °C to glassy solids via the anhydrous phosphonium polyborates that are formed at lower temperatures (<300 °C). BET analysis of the anhydrous and pyrolysed materials indicated they were non-porous with surface areas of 0.2-2.75 m2/g. Rhe recrystallization of 1 and 2 from aqueous solution afforded crystals suitable for single-crystal XRD analyses. The structure of 1 comprises alternating cationic/anionic layers with the H2O/pentaborate(1-) planes held together by H-bonds. The cationic planes have offset face-to-face (off) and vertex-to-face (vf) aromatic ring interactions with the iPr groups oriented towards the pentaborate(1-)/H2O layers. The anionic lattice in 2 is expanded by the inclusion of B(OH)3 molecules to accommodate the large cations; this results in the formation of a stacked pentaborate(1-)/B(OH)3 structure with channels occupied by the cations. The cations within the channels have vf, ef (edge-to-face), and off phenyl embraces. Both H-bonding and phenyl embrace interactions are important in stabilizing these two solid-state structures.
RESUMEN
The synthesis and characterisation of eleven different 2-(thienyl)quinoxaline species that incorporate different points of functionality, including at the thiophene or quinoxaline rings, are described. These species display variable fluorescence properties in the visible region (λem = 401-491 nm) depending upon the molecular structures and extent of conjugation. The series of 2-(thienyl)quinoxaline species were then investigated as cyclometalating agents for Ir(III) to yield [Ir(C^N)2(bipy)]PF6 (where C^N = the cyclometalated ligand; bipy = 2,2'-bipyridine). Eight complexes were successfully isolated and fully characterised by an array of spectroscopic and analytical techniques. Two Ir(III) examples were structurally characterised in the solid state using single crystal X-ray diffraction; both structures confirmed the proposed formulations and coordination spheres in each case showing that the thiophene coordinates via a Ir-C bond. The photophysical properties of the complexes revealed that each complex is luminescent under ambient conditions with a range of emission wavelengths observed (665-751 nm) indicating that electronic tuning can be achieved via both the thienyl and quinoxaline moieties.
RESUMEN
Structurally defined graphene nanoribbons (GNRs) have emerged as promising candidates for nanoelectronic devices. Low band gap (<1â eV) GNRs are particularly important when considering the Schottky barrier in device performance. Here, we demonstrate the first solution synthesis of 8-AGNRs through a carefully designed arylated polynaphthalene precursor. The efficiency of the oxidative cyclodehydrogenation of the tailor-made polymer precursor into 8-AGNRs was validated by FT-IR, Raman, and UV/Vis-near-infrared (NIR) absorption spectroscopy, and further supported by the synthesis of naphtho[1,2,3,4-ghi]perylene derivatives (1 and 2) as subunits of 8-AGNR, with a width of 0.86â nm as suggested by the X-ray single crystal analysis. Low-temperature scanning tunneling microscopy (STM) and solid-state NMR analyses provided further structural support for 8-AGNR. The resulting 8-AGNR exhibited a remarkable NIR absorption extending up to â¼2400â nm, corresponding to an optical band gap as low as â¼0.52â eV. Moreover, optical-pump TeraHertz-probe spectroscopy revealed charge-carrier mobility in the dc limit of â¼270â cm2 â V-1 s-1 for the 8-AGNR.
RESUMEN
We report the first NMR and X-ray diffraction (XRD) structures of an unusual 13/11-helix (alternating i, i+1 {NH-O=C} and i, i+3 {C=O-H-N} H-bonds) formed by a heteromeric 1 : 1 sequence of α- and δ-amino acids, and demonstrate the application of this framework towards catalysis. Whilst intramolecular hydrogen bonds (IMHBs) are the clear driver of helix formation in this system, we also observe an apolar interaction between the ethyl residue of one δ-amino acid and the cyclohexyl group of the next δ-residue in the sequence that seems to stabilize one type of helix over another. To the best of our knowledge this type of additional stabilization leading to a specific helical preference has not been observed before. Critically, the helix type realized places the α-residue functionalities in positions proximal enough to engage in bifunctional catalysis as demonstrated in the application of our system as a minimalist aldolase mimic.
Asunto(s)
Fructosa-Bifosfato Aldolasa , Péptidos , Modelos Moleculares , Péptidos/química , Aminoácidos/química , Aldehído-Liasas , Enlace de HidrógenoRESUMEN
Cyclic porphyrin oligomers have been studied as models for photosynthetic light-harvesting antenna complexes and as potential receptors for supramolecular chemistry. Here, we report the synthesis of unprecedented ß,ß-directly linked cyclic zinc porphyrin oligomers, the trimer (CP3) and tetramer (CP4), by Yamamoto coupling of a 2,3-dibromoporphyrin precursor. Their three-dimensional structures were confirmed by nuclear magnetic resonance (NMR) spectroscopy, mass spectrometry, and single-crystal X-ray diffraction analyses. The minimum-energy geometries of CP3 and CP4 have propeller and saddle shapes, respectively, as calculated using density functional theory. Their different geometries result in distinct photophysical and electrochemical properties. The smaller dihedral angles between the porphyrin units in CP3, compared with CP4, result in stronger π-conjugation, splitting the ultraviolet-vis absorption bands and shifting them to longer wavelengths. Analysis of the crystallographic bond lengths indicates that the central benzene ring of the CP3 is partially aromatic [harmonic oscillator model of aromaticity (HOMA) 0.52], whereas the central cyclooctatetraene ring of the CP4 is non-aromatic (HOMA -0.02). The saddle-shaped structure of CP4 makes it a ditopic receptor for fullerenes, with affinity constants of (1.1 ± 0.4) × 105 M-1 for C70 and (2.2 ± 0.1) × 104 M-1 for C60, respectively, in toluene solution at 298 K. The formation of a 1:2 complex with C60 is confirmed by NMR titration and single-crystal X-ray diffraction.
RESUMEN
The synthesis and characterization of six new substituted guanidium tetrahydroxidohexaoxidopentaborate(1-) salts are reported: [C(NH2)2(NHMe)][B5O6(OH)4]·H2O (1), [C(NH2)2(NH{NH2})][B5O6(OH)4] (2), [C(NH2)2(NMe2)][B5O6(OH)4] (3), [C(NH2)(NMe2)2][B5O6(OH)4] (4), [C(NHMe)(NMe2)2][B5O6(OH)4]·B(OH)3 (5), and [TBDH][B5O6(OH)4] (6) (TBD = 1,5,7-triazabicyclo [4.4.0]dec-5-ene). Compounds 1-6 were prepared as crystalline salts from basic aqueous solution via self-assembly processes from B(OH)3 and the appropriate substituted cation. Compounds 1-6 were characterized by spectroscopic (NMR and IR) and by single-crystal XRD studies. A thermal (TGA) analysis on compounds 1-3 and 6 demonstrated that they thermally decomposed via a multistage process to B2O3 at >650 °C. The low temperature stage (<250 °C) was endothermic and corresponded to a loss of H2O. Reactant stoichiometry, solid-state packing, and H-bonding interactions are all important in assembling these structures. An analysis of H-bonding motifs in known unsubstituted guanidinium salts [C(NH2)3]2[B4O5(OH)4]·2H2O, [C(NH2)3][B5O6(OH)4]·H2O, and [C(NH2)3]3[B9O12(OH)6] and in compounds 1-6 revealed that two important H-bonding R22(8) motifs competed to stabilize the observed structures. The guanidinium cation formed charge-assisted pincer cation-anion H-bonded rings as a major motif in [C(NH2)3]2[B4O5(OH)4]·2H2O and [C(NH2)3]3[B9O12(OH)6], whereas the anion-anion ring motif was dominant in [C(NH2)3][B5O6(OH)4]·H2O and in compounds 1-6. This behaviour was consistent with the stoichiometry of the salt and packing effects also strongly influencing their solid-state structures.
RESUMEN
Crystal structures described as concomitant triclinic (I) and monoclinic (II) polymorphs of meso-(E,E)-1,1'-[1,2-bis(4-chlorophenyl)ethane-1,2-diyl]bis(phenyldiazene) [Mohamed et al. (2016). Acta Cryst. C72, 57-62] have been re-investigated. The published model for II was distorted due to forcing the symmetry of space group C2/c on an incomplete structure model. It is shown here to be a likely three-component superposition of S,S and R,R enantiomers with a lesser amount of the meso form. A detailed analysis of how the improbable distortion in the published model aroused suspicion and the subsequent construction of undistorted chemically and crystallographically plausible alternatives having the symmetry of Cc and C2/c is presented. For the sake of completeness, an improved model for the triclinic P-1 structure of the meso isomer I, revised to include a minor disorder component, is also given.
RESUMEN
V-Shaped porphyrin dimers, with masked p-phenylene bridges, undergo efficient oxidative coupling to form meso-meso linked cyclic porphyrin oligomers. Reductive aromatization unmasks the p-phenylenes, increasing the strain. Oxidation then fuses the porphyrin dimers, providing a nanoring with curved walls. The strain in this macrocycle bends the p-phenylene and fused porphyrin dimer units (radii of curvature of 11.4 and 19.0 Å, respectively), but it does not significantly alter the electronic structure of the fused porphyrins.
RESUMEN
A series of 2-phenylquinoxaline ligands have been synthesised that introduce either CF3 or OCF3 electron-withdrawing groups at different positions of the phenyl ring. These ligands were investigated as cyclometalating reagents for platinum(II) to give neutral complexes of the form [Pt(C^N)(acac)] (in which C^N=cyclometalating ligand; acac=acetyl acetonate). X-ray crystallographic studies on three examples showed that the complexes adopt an approximate square planar geometry. All examples revealed strong Pt-Pt linear contacts of 3.2041(6), 3.2199(3) and 3.2586(2)â Å. The highly coloured complexes display efficient visible absorption at 400-500â nm (ϵ ≈5000â M-1 â cm-1 ) and orange red photoluminescent characteristics (λem =603-620â nm; Φem ≤37 %), which were subtly tuned by the ligand. Triplet emitting character was confirmed by microsecond luminescence lifetimes and the photogeneration of singlet oxygen with quantum efficiencies up to 57 %. Each complex was investigated as a photosensitiser for triplet-triplet annihilation energy upconversion using 9,10-diphenylanthracene as the annihilator species: a range of good upconversion efficiencies (ΦUC 5.9-14.1 %) were observed and shown to be strongly influenced by the ligand structure in each case.
RESUMEN
We report the first NMR and X-ray diffraction (XRD) structures of an unusual 13/11-helix (alternating i, i+1 {NH-O=C} and i, i+3 {C=O-H-N} H-bonds) formed by a heteromeric 1 : 1 sequence of α- and δ-amino acids, and demonstrate the application of this framework towards catalysis. Whilst intramolecular hydrogen bonds (IMHBs) are the clear driver of helix formation in this system, we also observe an apolar interaction between the ethyl residue of one δ-amino acid and the cyclohexyl group of the next δ-residue in the sequence that seems to stabilize one type of helix over another. To the best of our knowledge this type of additional stabilization leading to a specific helical preference has not been observed before. Critically, the helix type realized places the α-residue functionalities in positions proximal enough to engage in bifunctional catalysis as demonstrated in the application of our system as a minimalist aldolase mimic.
RESUMEN
The self-assembly and self-organization of water molecules are relevant in many fields of research. When water spontaneously reacts with 2,2,6,6-tetra-methyl-piperidine (TMP) to form colourless and crystalline discrete needles, only in the exact ratio of 2:1, it is important to understand the phenomenon. Single-crystal X-ray and neutron diffraction data have unveiled that TMP self-assembles around columns of water molecules, and as such, the resulting adduct may be described as a series of molecular water pipes.
RESUMEN
Bis-terdentate (N^N^N) ligands coordinated to Cr(III) yield complexes that display near-IR emission under aerated solvent conditions at room temperature.
Asunto(s)
LigandosRESUMEN
Treatment of a κ1-P-monodentate bicyclic diphosphane iridium(III) complex with a labile gold(I) precursor afforded an unusual IrIII/AuI complex in which the P-P single bond has been cleaved. This reaction was cleanly reversed upon addition of tertiary phosphine. Carbon-carbon bond activation, across neighbouring P2C2N rings of the coordinated bicyclic diphosphane, occurred upon thermolysis of the IrIII/AuI complex.
RESUMEN
The synthesis of six N,N'-substituted thiourea ligands (L1a-L3b) was achieved in two steps. A corresponding extensive series of Cu(I), Cu(II), Ni(II) and Zn(II) complexes (1-24) with varying formulations were synthesised from these ligands by the reaction of a 1 : 1 or a 1 : 2 mixture of Cu(II), Ni(II) and Zn(II) perchlorate or chloride salts. Complexes 1-24 have been comprehensively characterised by mass spectrometry, elemental analysis, UV-vis., IR, and 1H and 13C{1H} NMR spectroscopies where applicable. The X-ray crystal structures were obtained for eight examples: [(L1a)2Cu]ClO4 (1), [(L1c)2Zn](ClO4)2 (4), [(L2a)2Cu]ClO4 (6), [(L2c)2Ni](ClO4)2 (7), [(L1b)2Cu](ClO4) (15), [(L1b)CuCl] (16), [(L4)2CuCl2] (19) and [(L3b)CuClO4] (21). These studies reveal that L1c and L2c represent ligands that have undergone cleavage during reaction with the metal salt; L4 represents an intramolecular rearrangement (via a Hugershoff reaction) of L2b; and in most cases Cu(II) is reduced to Cu(I) during the ligand reaction. The X-ray crystal structures also reveal that 1, 4, 6, 15 and 16 are monometallic species in the solid state; that Cu(I) in 1, 6, 15 and 16 and Zn(II) in 4 are arranged in a distorted tetrahedral geometry; that Cu(I) in 21 adopts a trigonal planar geometry; and that in 7 and 19 the Ni(II) and Cu(II) centres, respectively, possess square planar geometry. Preliminary studies on the biological activity (using the Malaria Sybr Green I Fluorescence assay) of the thiourea containing complexes suggests that the d10 complexes, and increased ligand stoichiometries, may afford higher potency.
Asunto(s)
Complejos de CoordinaciónRESUMEN
During the racemization of a novel pharmaceutical spiro-cyclic imidazole-amine compound, namely, 6'-bromo-N-(6'-bromo-4-meth-oxy-4''-methyl-3'H-di-spiro[cyclo-hexane-1,2'-indene-1',2''-imidazol]-5''-yl)-4-meth-oxy-4''-methyl-3'H-di-spiro-[cyclo-hexane-1,2'-indene-1',2''-imidazol]-5''-imine, C36H41Br2N5O2, two impurities were isolated. These impurities were clearly dimers from mass spectroscopic analysis, however single-crystal diffraction characterization was required for the assignment of stereochemistry. The single-crystal diffraction results revealed subtly different structures to those proposed, due to an unexpected proton transfer. The dimers contain four stereocentres, but two of primary inter-est, and are centrosymmetric, so after careful structure refinement and close inspection it was possible to unambiguously assign the stereochemistry of both the homochiral [(S),(S)- and (R),(R)-] and the heterochiral [(S),(R)- and (R),(S)-] compounds.