RESUMEN
A gyroscope-free strapdown inertial navigation system (GFSINS) solves the carrier attitude through the reasonable spatial combination of accelerometers, with a particular focus on the precision of angular velocity calculation. This paper conducts an analysis of a twelve-accelerometer configuration scheme and proposes an angular velocity fusion algorithm based on the Kalman filter. To address the sign misjudgment issue that may arise when calculating angular velocity using the extraction algorithm, a sliding window correction method is introduced to enhance the accuracy of angular velocity calculation. Additionally, the data from the integral algorithm and the data from the improved extraction algorithm are fused using Kalman filtering to obtain the optimal estimation of angular velocity. Simulation results demonstrate that this algorithm significantly reduces the maximum value and standard deviation of angular velocity error by one order of magnitude compared to existing algorithms. Experimental results indicate that the algorithm's calculated angle exhibits an average difference of less than 0.5° compared to the angle measured by the laser tracker. This level of accuracy meets the requirements for attitude measurement in the laser scanning projection system.
RESUMEN
To improve the measurement accuracy of the profilometer for large optical surfaces, a new single-step spatial rotation error separation technique (SSEST) is proposed to separate the surface profile error and spindle spatial rotation error, and a novel SSEST-based system for surface profile measurement is developed. In the process of separation, two sets of measured results at the ith measurement circle are obtained before and after the rotation of error separation table, the surface profile error and spatial rotation error of spindle can be determined using discrete Fourier-transform and harmonic analysis. Theoretical analyses and experimental results indicate that SSEST can accurately separate spatial rotation error of spindle from the measured surface profile results within the range of 1-100 upr and improve the accuracy of surface profile measurements.