Pressure-Induced Re-Entrant Superconductivity in Transition Metal Dichalcogenide TiSe2.

Transition metal dichalcogenide TiSe2 exhibits a superconducting dome within a low pressure range of 2-4 GPa, which peaks with the maximal transition temperature Tc of ≈1.8 K. Here it is reported that applying high pressure induces a new superconducting state in TiSe2, which starts at ≈16 GPa with a substantially higher Tc that reaches 5.6 K at ≈21.5 GPa with no sign of decline. Combining high-throughput first-principles structure search, X-ray diffraction, and Raman spectroscopy measurements up to 30 GPa, It is found that TiSe2 undergoes a first-order structural transition from the 1T phase under ambient pressure to a new 4O phase under high pressure. Comparative ab initio calculations reveal that while the conventional phonon-mediated pairing mechanism may account for the superconductivity observed in 1T-TiSe2 under low pressure, the electron-phonon coupling of 4O-TiSe2 is too weak to induce a superconducting state whose transition temperature is as high as 5.6 K under high pressure. The new superconducting state found in pressurized TiSe2 requires further study on its underlying mechanism.

Raman study of decomposition of Na-bearing carbonates in water fluid at high P-T parameters.

The study of Na-carbonates stability and their transformations in aqueous carbonate fluid under high P-T conditions is relevant from the point of view of the understanding geochemical processes of the Na-assisted carbon circulation in the Earth's crust and subduction zones. In situ Raman study of Na-bearing carbonate-water-Fe-metal system in diamond anvil cell (DAC) at high P-T conditions revealed that carbonates decompose with abiogenic formation of formates and other organic compounds that differs from behavior of carbonates in dry system. XRD and FTIR methods have been used additionally to determine the phase composition. Na-bearing carbonates (nahcolite NaHCO3, shortite Na2Ca2(CO3)3 and cancrinite Na7Ca[(CO3)1.5Al6Si6O24]⋅2H2O) in aqueous fluid decompose to form simple carbonates and formates (as dominant organic molecules) at moderate P-T parameters (above ∼0.2 GPa, 200 °C). Our experimental results directly confirm the hypothesis of Horita and Berndt (Science, 1999) about possible yield of organic formates in the carbonate-water-metal system. Nahcolite NaHCO3 in aqueous fluid in the presence of Fe metal decomposes into anhydrous phases: natrite γ-Na2CO3, siderite, magnetite (due to dissolution of Fe steel gasket), Na-formate and likely organic molecular crystalline solvate of Na-formate and methyl formate. Shortite decays into anhydrous phases: aragonite CaCO3, Na-Ca-formates and an amorphous phase. Cancrinite decomposes to unidentified carbonate-alumonosilicate phases, Na-Ca-formates and unknown organic molecular crystal. Magnetite is also formed in this system due to dissolution of Fe steel gasket used in DAC. The present study provides a new insight in processes of abiogenic formation of organic matter from carbonates in the crust and upper mantle.

Impact of high-pressure processing on the bioactive compounds of milk - A comprehensive review.

High-pressure processing (HPP) is a promising alternative to thermal pasteurization. Recent studies highlighted the effectivity of HPP (400-600 MPa and exposure times of 1-5 min) in reducing pathogenic microflora for up to 5 logs. Analysis of modern scientific sources has shown that pressure affects the main components of milk including fat globules, lactose, casein micelles. The behavior of whey proteins under HPP is very important for milk and dairy products. HPP can cause significant changes in the quaternary (> 150 MPa) and tertiary (> 200 MPa) protein structures. At pressures > 400 MPa, they dissolve in the following order: αs2-casein, αs1-casein, k-casein, and ß-casein. A similar trend is observed in the processing of whey proteins. HPP can affect the rate of milk fat adhering as cream with increased results at 100-250 MPa with time dependency while decreasing up to 70% at 400-600 MPa. Some studies indicated the lactose influencing casein on HP, with 10% lactose addition in case in suspension before exposing it to 400 MPa for 40 min prevents the formation of large casein micelles. Number of researches has shown that moderate pressures (up to 400 MPa) and mild heating can activate or stabilize milk enzymes. Pressures of 350-400 MPa for 100 min can boost the activity of milk enzymes by up to 140%. This comprehensive and critical review will benefit scientific researchers and industrial experts in the field of HPP treatment of milk and its effect on milk components.

Near-Full-Spectrum Emission Realized in a Single Lead Halide Perovskite across the Visible-Light Region.

The engineering of tunable photoluminescence (PL) in single materials with a full-spectrum emission represents a highly coveted objective but poses a formidable challenge. In this context, the realization of near-full-spectrum PL emission, spanning the visible light range from 424 to 620 nm, in a single-component two-dimensional (2D) hybrid lead halide perovskite, (ETA)2PbBr4 (ETA+ = (HO)(CH2)2NH3+), is reported, achieved through high-pressure treatment. A pressure-induced phase transition occurs upon compression, transforming the crystal structure from an orthorhombic phase under ambient conditions to a monoclinic structure at high pressure. This phase transition driven by the adaptive and dynamic configuration changes of organic amine cations enables an effective and continuous narrowing of the bandgap in this halide crystal. The hydrogen bonding interactions between inorganic layers and organic amine cations (N-H…Br and O-H…Br hydrogen bonds) efficiently modulate the organic amine cations penetration and the octahedral distortion. Consequently, this phenomenon induces a phase transition and results in red-shifted PL emissions, leading to the near-full-spectrum emission. This work opens a possibility for achieving wide PL emissions with coverage across the visible light spectrum by employing high pressure in single halide perovskites.

The effect of structural changes on the activity of peroxidase with different initial state under high-pressure freezing.

The combined impact of initial state, pressure, and freezing on peroxidase denaturation during high-pressure freezing (HPF) processing of enzyme-containing foods remains unclear. This study investigated solid-liquid (initial low/high concentration) biphasic peroxidase using spectroscopic and computer simulation techniques to analyze structural changes affecting peroxidase (POD) activity under HPF. The results indicate that the primary factors determining POD activity during HPF treatment can be ranked as follows: concentration > physical state > pressure > freezing. Higher initial concentrations strengthen protein interactions, leading to a 1% increase in the molecular diameter and a 34% increase in molecular height of HL-POD, thereby increasing aggregation likelihood during crystallization and facilitating structural changes that activate enzymes by 6-17%. The amide I peak proves to be a reliable indicator for monitoring both POD activity and structural alterations. This study offers valuable insights for optimizing HPF technology in food processing.

Prediction of Room-Temperature Superconductivity in Quasi-Atomic H2-Type Hydrides at High Pressure.

Achieving superconductivity at room temperature (RT) is a holy grail in physics. Recent discoveries on high-Tc superconductivity in binary hydrides H3S and LaH10 at high pressure have directed the search for RT superconductors to compress hydrides with conventional electron-phonon mechanisms. Here, an exceptional family of superhydrides is predicated under high pressures, MH12 (M = Mg, Sc, Zr, Hf, Lu), all exhibiting RT superconductivity with calculated Tcs ranging from 313 to 398 K. In contrast to H3S and LaH10, the hydrogen sublattice in MH12 is arranged as quasi-atomic H2 units. This unique configuration is closely associated with high Tc, attributed to the high electronic density of states derived from H2 antibonding states at the Fermi level and the strong electron-phonon coupling related to the bending vibration of H2 and H-M-H. Notably, MgH12 and ScH12 remain dynamically stable even at pressure below 100 GPa. The findings offer crucial insights into achieving RT superconductivity and pave the way for innovative directions in experimental research.

Enhancing protein extraction from heterotrophic Auxenochlorella protothecoides microalgae through emerging cell disruption technologies combined with incubation.

This study evaluated pulsed electric fields (PEF) and ultrasonication (US) combined with incubation to enhance cell disruption and protein extraction from Auxenochlorella protothecoides, comparing them to conventional high-pressure homogenization (HPH). A 5 h incubation enhanced protein yield by 79.4 % for PEF- and 27.2 % for US-treated samples. Extending the incubation to 24 h resulted in a total yield increase of 122 % for PEF (0.25 ± 0.03 kgEP kgTP-1) and 51.9 % for US (0.20 ± 0.02 kgEP-1 kgTP-1). Autofermentation in untreated cells after 24 h resulted in protein release with lower yields than all other treated and incubated samples. While HPH had the highest protein yield (0.58 ± 0.04 kgEP kgTP-1), PEF-incubation after 5 h (56.6 ± 5.3 MJ kgEP-1) and 24 h (49.5 ± 3.7 MJ kgEP-1) were 1.5 and 1.7-times more energy-efficient than HPH (82.9 ± 7.8 MJ kgEP-1). PEF combined incubation is an energy-efficient and targeted protein extraction method in heterotrophic A. protothecoides biorefinery.

The effect of hydrostatic pressure on lipid membrane lateral structure.

High pressure is both an environmental challenge to which deep sea biology has to adapt, and a highly sensitive thermodynamic tool that can be used to trigger structural changes in biological molecules and assemblies. Lipid membranes are amongst the most pressure sensitive biological assemblies and pressure can have a large influence on their structure and properties. In this chapter, we will explore the use of high pressure small angle X-ray diffraction and high pressure microscopy to measure and quantify changes in the lateral structure of lipid membranes under both equilibrium high pressure conditions and in response to pressure jumps.

Exploring optimal incubation conditions and characteristics of methane oxidizing organisms in deep-sea environments.

Anaerobic methanotrophic archaea (ANME) play key roles in buffering the methane budget in the deep-sea environment. This study aimed to explore the optimal environmental conditions for ANME enrichment. The result showed that the sample at 10.5 MPa contained the largest copy numbers of methyl-coenzyme M reductase alpha subunit (mcrA) gene (1.1 × 106 copies/g) compared to any other pressures and the sample at 4 °C contained higher mcrA gene (1.6 × 106 copies/g) than other temperatures. The optimal enrichment pressure for ANME-2c is 10.5 MPa at 4 °C, with an optimal subsequent incubation for ANME-2c less than 211days. Moreover, the beta nearest taxon index was significantly correlated with the incubation time (P<0.05). Total inorganic carbon and sulfate ion were key environmental factors driving community construction. This study offers insights into how ANME-2c was enriched and how species coexist in shared habitats during enrichment.

Imaging Bunyavirus Infections by Transmission Electron Microscopy: Conventional Sample Preparation vs High-Pressure Freezing and Freeze-Substitution.

Transmission electron microscopy significantly contributed to unveil the course of virus entry, replication, morphogenesis, and egress. For these studies, the most widely used approach is imaging ultrathin sections of virus-infected cells embedded in a plastic resin that is transparent to electrons. Before infiltration in a resin, cells must be processed to stabilize their components under the observation conditions in an electron microscope, such as high vacuum and irradiation with electrons. For conventional sample preparation, chemical fixation and dehydration are followed by infiltration in the resin and polymerization to produce a hard block that can be sectioned with an ultramicrotome. Another method that provides a superior preservation of cell components is high-pressure freezing (HPF) followed by freeze substitution (FS) before resin infiltration and polymerization. This chapter describes both procedures with cells infected with Bunyamwera virus (BUNV), a well characterized member of the Bunyavirales, and compares the morphological details of different viral structures imaged in the two types of samples. Advantages, disadvantages, and applications of conventional processing and HPF/FS are also presented and discussed.

P1-xTa8+xN13 (x = 0.1-0.15): A Phosphorus Tantalum Nitride Featuring Mixed-Valent Tantalum and P/Ta Disorder Visualized by Scanning Transmission Electron Microscopy.

We report on the synthesis, crystal, and electronic structure, as well as the magnetic, and electric properties of the phosphorus-containing tantalum nitride P1-xTa8+xN13 (x = 0.1-0.15). A high-pressure high-temperature reaction (8 GPa, 1400 °C) of Ta3N5 and P3N5 with NH4F as a mineralizing agent yields the compound in the form of black, rod-shaped crystals. Single-crystal X-ray structure elucidation (space group C2/m (no. 12), a = 16.202(3), b = 2.9155(4), c = 11.089(2) Å, ß = 126.698(7)°, Z = 2) shows a network of face- and edge-sharing Ta-centered polyhedra that contains small vacant channels and  PN6 octahedra strands. Atomic resolution transmission electron microscopy reveals an unusual P/Ta disorder. Mixed-valent tantalum atoms exhibit interatomic distances similar to those in metallic tantalum, however, the electrical resistivity is quite high in the order of 10­1 Ω cm. The density of states and the electron localization function indicate localized electrons in both covalent and ionic bonds between P/Ta and N atoms, combined with less localized electrons that do not contribute to interatomic bonds.

Ammonothermal Crystal Growth of Functional Nitrides for Semiconductor Devices: Status and Potential.

The state-of-the-art ammonothermal method for the growth of nitrides is reviewed here, with an emphasis on binary and ternary nitrides beyond GaN. A wide range of relevant aspects are covered, from fundamental autoclave technology, to reactivity and solubility of elements, to synthesized crystalline nitride materials and their properties. Initially, the potential of emerging and novel nitrides is discussed, motivating their synthesis in single crystal form. This is followed by a summary of our current understanding of the reactivity/solubility of species and the state-of-the-art single crystal synthesis for GaN, AlN, AlGaN, BN, InN, and, more generally, ternary and higher order nitrides. Investigation of the synthesized materials is presented, with a focus on point defects (impurities, native defects including hydrogenated vacancies) based on GaN and potential pathways for their mitigation or circumvention for achieving a wide range of controllable functional and structural material properties. Lastly, recent developments in autoclave technology are reviewed, based on GaN, with a focus on advances in development of in situ technologies, including in situ temperature measurements, optical absorption via UV/Vis spectroscopy, imaging of the solution and crystals via optical (visible, X-ray), along with use of X-ray computed tomography and diffraction. While time intensive to develop, these technologies are now capable of offering unprecedented insight into the autoclave and, hence, facilitating the rapid exploration of novel nitride synthesis using the ammonothermal method.

Elastoplastic Mechanical Properties and Kinematic Hardening Model of 35CrNi3MoVR.

The existing tensile-compression elastoplastic models are not suitable for varies of materials. An accurate constitutive model of the elastoplastic mechanical properties more suitable for 35CrNi3MoVR was produced by optimizing the existing fitting equations based on uniaxial tensile-compression tests, which are able to describe the elastoplastic stress-strain relation and Bauschinger effect varying with the maximum tensile plastic strain. A UMAT subroutine of the constitutive model in ABAQUS was proposed and conducted for FEM calculation. Hydraulic autofrettage tests were carried out under different pressures on thick-walled 35CrNi3MoVR tubes, and the results were compared with those of FEM calculations to further validate the accuracy of the fitting model. The results show that the constructed power function kinematic hardening model can effectively describe the elastoplastic mechanical properties of 35CrNi3MoVR and can be applied to the autofrettage calculation of this material. The comparison among the calculation results of different models proved that the model proposed in this research has better performance compared to other existing models. Taking the Mises stress at the inner surface of the thick-walled tubes as the evaluation criterion, the error of the power function kinematic hardening model reaches less than 3%, decreasing the error by at least 50%.

Effects of Emulsifiers on Physicochemical Properties and Carotenoids Bioaccessibility of Sea Buckthorn Juice.

The need to improve the physicochemical properties of sea buckthorn juice and the bioavailability of carotenoids is a major challenge for the field. The effects of different natural emulsifiers, such as medium-chain triglycerides (MCTs), tea saponins (TSs) and rhamnolipids (Rha), on the physical and chemical indexes of sea buckthorn juice were studied. The particle size of sea buckthorn juice and the carotenoids content were used as indicators for evaluation. The effects of different addition levels of MCT, Rha and TS on the bioavailability of carotenoids in sea buckthorn juice were investigated by simulating human in vitro digestion tests. The results showed that those emulsifiers, MCT, Rha and TS, can significantly reduce the particle size and particle size distribution of sea buckthorn juice, improve the color, increase the soluble solids content, turbidity and physical stability and protect the carotenoids from degradation. When the addition amount of Rha was 1.5%, the total carotenoids content (TCC) of sea buckthorn juice increased by 45.20%; when the addition amount of TS was 1.5%, the total carotenoids content (TCC) of sea buckthorn juice increased by 37.95%. Furthermore, the bioaccessibility of carotenoids was increased from 36.90 ± 2.57% to 54.23 ± 4.17% and 61.51 ± 4.65% through in vitro digestion by Rha and TS addition, respectively. However, the total carotenoids content (TCC) of sea buckthorn juice and bioaccessibility were not significantly different with the addition of MCT. In conclusion, the findings of this study demonstrate the potential of natural emulsifiers, such as MCT, Rha and TS, to significantly enhance the physicochemical properties and bioavailability of carotenoids in sea buckthorn juice, offering promising opportunities for the development of functional beverages with improved nutritional benefits.

Effect of Dynamic High-Pressure Microfluidization on the Quality of Not-from-Concentrate Cucumber Juice.

The effects of dynamic high-pressure microfluidization (DHPM at 400 MPa) and heat treatment (HT) on the microbial inactivation, quality parameters, and flavor components of not-from-concentrate (NFC) cucumber juice were investigated. Total aerobic bacteria, yeasts and molds were not detected in the 400 MPa-treated cucumber juice. Total phenolic content increased by 16.2% in the 400 MPa-treated cucumber juice compared to the control check (CK). The significant reduction in pulp particle size (volume peak decreasing from 100-1000 µm to 10-100 µm) and viscosity increased the stability of the cucumber juice while decreasing the fluid resistance during processing. HT decreased the ascorbic acid content by 25.9% (p < 0.05), while the decrease in ascorbic acid content was not significant after 400 MPa treatment. A total of 59 volatile aroma substances were identified by gas chromatography-ion mobility spectrometry (GC-IMS), and a variety of characteristic aroma substances (i.e., valeraldehyde, (E)-2-hexenal, (E)-2-nonenal, and (E,Z)-2,6-nonadienal, among others) were retained after treatment with 400 MPa. In this study, DHPM technology was innovatively applied to cucumber juice processing with the aim of providing a continuous non-thermal processing technology for the industrial production of cucumber juice. Our results provide a theoretical basis for the application of DHPM technology in cucumber juice production.

Effects of Ultra-High-Pressure Treatment on Chemical Composition and Biological Activities of Free, Esterified and Bound Phenolics from Phyllanthus emblica L. Fruits.

Phyllanthus emblica L. fruits (PEFs) were processed by ultra-pressure (UHP) treatment and then extracted by the ultrasonic-assisted extraction method. The influence of UHP on the phenolic composition, enzyme inhibitory activity and antioxidant activity of the free, esterified, and bound phenolic fractions from PEFs were compared. UHP pretreatment of PEFs significantly increased the total phenolic and flavonoid contents (p < 0.05). A total of 24 chemical compositions were characterized in normal and UHP-treated PEFs by UHPLC-ESI-HRMS/MS. Compared with normal PEFs, these three different phenolic fractions had stronger antioxidant activities and inhibitory effects on the intracellular reactive oxygen species (ROS) production in H2O2-induced HepG2 cells (p < 0.05). The ROS inhibition might be due to an up-regulation of the expressions of superoxide dismutase (SOD) and glutathione (GSH) activities. In addition, these three different phenolic fractions also significantly inhibited the activities of metabolic enzymes, including α-glucosidase, α-amylase and pancreatic lipase. This work may provide some insights into the potential economics and applications of PEFs in food and nutraceutical industries.

Diagnostic and therapeutic insights in individuals with persistent post-dural puncture headache: A cross-sectional study.

BACKGROUND: Post-dural puncture headache (PDPH) is a frequent complication following lumbar puncture, epidural analgesia, or neuraxial anesthesia. The International Classification of Headache Disorders, third edition categorizes PDPH as a self-limiting condition; however, emerging evidence, including our findings, suggests that PDPH can have a prolonged course, challenging this traditional view. OBJECTIVES: To elucidate the diagnostic characteristics and treatment outcomes of persistent PDPH (pPDPH), offering insights into its demographic profiles and diagnostic features. METHODS: We executed an anonymous, web-based survey targeting individuals aged ≥18 years diagnosed with or suspected of having pPDPH. Recruitment occurred through self-help groups on Facebook. The survey comprised questions regarding diagnostic procedures, treatment regimens, outcomes, and healthcare consultation. RESULTS: The survey achieved a response rate of 179/347 (51.6%) individuals completing the questionnaire. Cerebrospinal fluid (CSF) leaks were confirmed in nine of 179 (5.0%) cases. Signs of intracranial hypotension without a CSF leak were observed in 70/179 (39.1%) individuals. All participants underwent magnetic resonance imaging scans of the brain and spine, with computed tomography myelography performed in 113/179 (63.1%) cases. Medications, including analgesics, theophylline, and gabapentin, provided minimal short-term relief. Epidural blood patch treatments resulted in slight-to-moderate short-term improvement in 136/179 (76.0%), significant improvement in 22/179 (12.3%), and complete effectiveness in eight of 179 (4.5%) individuals. For long-term outcomes, slight-to-moderate improvement was reported by 118/179 (66.0%) individuals. Surgical interventions were carried out in 42/179 (23.5%) patients, revealing pseudomeningoceles intraoperatively in 20/42 (47.6%) individuals. After surgery, 21/42 (50.0%) of the participants experienced slight-to-moderate improvement, 12/42 (28.6%) showed more pronounced improvement, and five of the 42 (11.9%) achieved complete effectiveness. CONCLUSION: This study underscores the complexities of managing pPDPH. The delay in diagnosis can impact the effectiveness of treatments, including epidural blood patch and surgical interventions, resulting in ongoing symptoms. This underscores the importance of tailored and adaptable treatment strategies. The findings advocate for additional research to deepen the understanding of pPDPH and improve long-term patient outcomes.

Modulating Carrier Dynamics in PdSe2: The Role of Pressure in Electronic and Phononic Interactions.

PdSe2 is a puckered transition metal dichalcogenide that has been reported to undergo a two-dimensional to three-dimensional structural transition under pressure. Here, we investigated the electronic and phononic evolution of PdSe2 under high pressure using pump-probe spectroscopy. We observed the electronic intraband and interband transitions occurring in the d orbitals of Pd, revealing the disappearance of the Jahn-Teller effect under high pressure. Furthermore, we found that the decay rates of interband recombination and intraband relaxation lifetimes change at 3 and 7 GPa, respectively. First-principles calculations suggest that the bandgap closure slows the decay rate of interband recombination after 3 GPa, while the saturation of phonon-phonon scattering is the main reason for the relatively constant intraband relaxation lifetime. Our work provides a novel perspective for understanding the evolution of the electron and modulation of the carrier dynamics by phonons under pressure.

First-principles calculation of HubbardUfor Terbium metal under high pressure.

Using density functional theory (DFT) and linear response approaches, we compute the on-site Hubbard interactionUof elemental Terbium (Tb) metal in the pressure range ∼ 0-65 GPa. The resulting first-principlesUvalues with experimental crystal structures enable us to examine the magnetic properties of Tb using a DFT+U method. The lowest-energy magnetic states in our calculations for different high-pressure Tb phases-including hcp,α-Sm, and dhcp-are found to be compatible with the corresponding magnetic ordering vectors reported in experiments. The result shows that the inclusion of HubbardUsubstantially improves the accuracy and efficiency in modeling correlated rare-earth materials. Our study also provides the necessaryUinformation for other quantum many-body techniques to study Tb under extreme pressure conditions.

Effects of high pressure processing on structural changes, aggregation, and binding mechanisms of ß-Lactoglobulin with typical polyphenols.

The binding capacity of ß-Lactoglobulin (BLG) is crucial for delivering polyphenols, influenced by structural changes. High pressure processing (HPP) has the potential to modify BLG's structure and aggregation, but its specific impact on BLG-polyphenol interactions is uncertain. This study used circular dichroism spectroscopy and molecular dynamics simulations to reveal HPP-induced structural changes in BLG, supported by particle size analysis indicating aggregation. Seven structurally diverse polyphenols (quercetin-QR, hesperetin-HSP, dihydromyricetin-DHM, gallic acid-GA, (-)-epicatechin-EC, resveratrol-RES, and secoisolariciresinol diglucoside-SDG) were investigated to comprehensively analyze their binding patterns using fluorescence spectroscopy and molecular docking. HPP reduced BLG's ordered structure and increased its aggregation. Binding affinities peaked at 400 MPa for DHM, QR, HSP, GA, and RES, while SDG and EC exhibited maximum affinities at atmospheric pressure and 600 MPa, respectively. Elevated pressures enhanced BLG-polyphenol interactions, particularly at residues 44GLU and 160CYS, with van der Waals forces dominating the binding free energy.