Determining engineering properties of ultra-high-performance fiber-reinforced geopolymer concrete modified with different waste materials.

Reprocessing solid waste materials is a low-cost method of preserving the environment, conserving natural resources, and reducing raw material consumption. Developing ultra-high-performance concrete materials requires an immense quantity of natural raw materials. The current study seeks to tackle this issue by evaluating the effect of various discarded materials, waste glass (GW), marble waste (MW), and waste rubber powder (WRP) as a partial replacement of fine aggregates on the engineering properties of sustainable ultra-high-performance fiber-reinforced geopolymer concrete (UHPGPC). Ten different mixtures were developed as a partial substitute for fine aggregate, each containing 2% double-hooked end steel fibers, 5%, 10%, and 15% GW, MW, and WRP. The present study assessed the fresh, mechanical, and durability properties of UHPGPC. In addition, to evaluate concrete development at the microscopic level due to the addition of GW, MW, and WRP. Spectra of X-ray diffraction (XRD), thermogravimetric analysis (TGA), and mercury intrusion (MIP) tests were conducted. The test results were compared to current trends and procedures identified in the literature. According to the study, adding 15% marble waste and 15% waste rubber powder reduced ultra-high-performance geopolymer concrete's strength, durability, and microstructure properties. Even so, adding glass waste improved the properties, as the sample with 15% GW had the highest compressive strength of 179 MPa after 90 days. Furthermore, incorporating glass waste into the UHPGPC resulted in a good reaction between the geopolymerization gel and the waste glass particles, enhancing strength properties and a packed microstructure. The inclusion of glass waste in the mix resulted in the control of crystal-shaped humps of quartz and calcite, according to XRD spectra. During the TGA analysis, the UHPGPC with 15% glass waste had the minimum weight loss (5.64%) compared to other modified samples.

Experimental study on the properties of ultra-high-strength geopolymer concrete with polypropylene fibers and nano-silica.

Because of the recent progress in materials properties, specifically high-strength concrete, further research is needed to evaluate its suitability, understanding, and performance in the modern-day world. This research aims to enhance the performance of ultra-high-strength geopolymer concrete (UHS-GPC) by adding nano-silica (NS) and polypropylene fibers (PPFs). Three 1%, 2%, and 3% different amounts of PPFs and three NS 5%, 10%, and 15% were utilized in the samples. Various performance parameters of UHS-GPC were evaluated, such as fresh property, compressive strength, modulus of elasticity split tensile, flexural and bonding strength, drying shrinkage, load-displacement test, fracture performance, and elevated temperature. The test outcomes showed that by raising the percentage of PPFs and NS to the allowable limit, the performance of UHS-GPC can be improved significantly. The most improved performance of UHS-GPC was obtained at 2% polypropylene fibers and 10% nano-silica, as the compressive, splitting tensile, flexural. Bond strength was improved by 17.07%, 47.1%, 36.52, and 37.58%, and the modulus of elasticity increased by 31.4% at 56 days. The study showed that the sample with 2% PPFs and 10% NS had excellent performance in the load-displacement test, drying shrinkage, fracture behavior, and elevated temperature. At 750°C elevated temperature, the samples' strength was reduced drastically, but at 250°C, the modified samples showed good resistance to heat by retaining their compressive strength to some degree. The present work showed the suitability of PPFs and NS to develop ultra-high-strength geopolymer concrete, which can be used as a possible alternate material for Portland cement-based concrete.

Middle Pleistocene dental remains from Qesem Cave (Israel).

This study presents a description and comparative analysis of Middle Pleistocene permanent and deciduous teeth from the site of Qesem Cave (Israel). All of the human fossils are assigned to the Acheulo-Yabrudian Cultural Complex (AYCC) of the late Lower Paleolithic. The Middle Pleistocene age of the Qesem teeth (400-200 ka) places them chronologically earlier than the bulk of fossil hominin specimens previously known from southwest Asia. Three permanent mandibular teeth (C(1) -P(4) ) were found in close proximity in the lower part of the stratigraphic sequence. The small metric dimensions of the crowns indicate a considerable degree of dental reduction although the roots are long and robust. In contrast, three isolated permanent maxillary teeth (I(2) , C(1) , and M(3) ) and two isolated deciduous teeth that were found within the upper part of the sequence are much larger and show some plesiomorphous traits similar to those of the Skhul/Qafzeh specimens. Although none of the Qesem teeth shows a suite of Neanderthal characters, a few traits may suggest some affinities with members of the Neanderthal evolutionary lineage. However, the balance of the evidence suggests a closer similarity with the Skhul/Qafzeh dental material, although many of these resemblances likely represent plesiomorphous features.

The earliest modern humans outside Africa.

To date, the earliest modern human fossils found outside of Africa are dated to around 90,000 to 120,000 years ago at the Levantine sites of Skhul and Qafzeh. A maxilla and associated dentition recently discovered at Misliya Cave, Israel, was dated to 177,000 to 194,000 years ago, suggesting that members of the Homo sapiens clade left Africa earlier than previously thought. This finding changes our view on modern human dispersal and is consistent with recent genetic studies, which have posited the possibility of an earlier dispersal of Homo sapiens around 220,000 years ago. The Misliya maxilla is associated with full-fledged Levallois technology in the Levant, suggesting that the emergence of this technology is linked to the appearance of Homo sapiens in the region, as has been documented in Africa.

Ibero⁻American Consensus on Low- and No-Calorie Sweeteners: Safety, Nutritional Aspects and Benefits in Food and Beverages.

International scientific experts in food, nutrition, dietetics, endocrinology, physical activity, paediatrics, nursing, toxicology and public health met in Lisbon on 2⁻4 July 2017 to develop a Consensus on the use of low- and no-calorie sweeteners (LNCS) as substitutes for sugars and other caloric sweeteners. LNCS are food additives that are broadly used as sugar substitutes to sweeten foods and beverages with the addition of fewer or no calories. They are also used in medicines, health-care products, such as toothpaste, and food supplements. The goal of this Consensus was to provide a useful, evidence-based, point of reference to assist in efforts to reduce free sugars consumption in line with current international public health recommendations. Participating experts in the Lisbon Consensus analysed and evaluated the evidence in relation to the role of LNCS in food safety, their regulation and the nutritional and dietary aspects of their use in foods and beverages. The conclusions of this Consensus were: (1) LNCS are some of the most extensively evaluated dietary constituents, and their safety has been reviewed and confirmed by regulatory bodies globally including the World Health Organisation, the US Food and Drug Administration and the European Food Safety Authority; (2) Consumer education, which is based on the most robust scientific evidence and regulatory processes, on the use of products containing LNCS should be strengthened in a comprehensive and objective way; (3) The use of LNCS in weight reduction programmes that involve replacing caloric sweeteners with LNCS in the context of structured diet plans may favour sustainable weight reduction. Furthermore, their use in diabetes management programmes may contribute to a better glycaemic control in patients, albeit with modest results. LNCS also provide dental health benefits when used in place of free sugars; (4) It is proposed that foods and beverages with LNCS could be included in dietary guidelines as alternative options to products sweetened with free sugars; (5) Continued education of health professionals is required, since they are a key source of information on issues related to food and health for both the general population and patients. With this in mind, the publication of position statements and consensus documents in the academic literature are extremely desirable.

Dramatic response to cholestyramine in a patient with Graves' disease resistant to conventional therapy.

BACKGROUND: Resistance to the conventional treatment of hyperthyroidism with antithyroid drugs is not commonly found in clinical practice, and only few other treatment options have been reported on in detail. For example, surgery or radioiodine ablation are well-accepted interventions that must be always considered. The euthyroid state is strongly recommended before both of these as this might reduce complications. There are few studies indicating that bile acid sequestrants, when added to antithyroid drugs, produce a more rapid decline in serum thyroid hormone levels and that this effect is maintained for at least 4 weeks. Complete normalization of serum thyroid hormone levels is generally not expected, however. SUMMARY: We report a patient whose thyrotoxicosis failed to respond to conventional treatment. The patient remained persistently hyperthyroid, both clinically and biochemically, despite several months of methimazole and propranolol and the addition of iodine. Cholestyramine, a bile acid sequestrant, was then added, and a dramatic improvement was observed. CONCLUSION: We report a patient who was resistant to conventional antithyroid drugs in whom thyroid hormone levels completely normalized after 1 week of additional treatment with cholestyramine.