Novel 2,3-Dialdehyde Cellulose-Based Films with Photodynamic Inactivation Potency by Incorporating the ß-Cyclodextrin/Curcumin Inclusion Complex.

Antibacterial packaging film mediated by photodynamic inactivation (PDI) is a new concept in food industry. The objective of this study was to fabricate a green 2,3-dialdehyde cellulose (DAC)-based antimicrobial film with PDI potency by incorporating the ß-cyclodextrin/curcumin (ß-CD/Cur) complex as a photosensitizer. The PDI-mediated films were characterized by evaluating the surface morphology, chemical structure, light transmittance, mechanical properties, photochemical and thermal stability, and water solubility. The results showed that the DAC-CD/Cur films were soluble in water and mechanically strong with a tensile strength of 63.87 MPa and an elongation break of 1.32%, which was attributed to the formation of hydrogen bonds between DAC and ß-CD/Cur molecules. Meanwhile, the composite films possessed a good light transmittance but impeded the penetration of ultraviolet light and efficiently delayed the degradation of curcumin. More importantly, the PDI-mediated films exhibited a broad-spectrum ability to kill Listeria monocytogenes, Vibrio parahaemolyticus, and Shewanella putrefaciens in pure culture. Notably, they also potently inactivated these harmful bacteria on ready-to-eat salmon with a maximum of ∼4 Log CFU/g (99.99%) reduction after 60 min irradiation (13.68 J/cm2). Therefore, the PDI-mediated DAC-CD/Cur films are novel and promising antimicrobial food packaging films in food industry.

Fabrication of carvacrol loaded cellulose acetate phthalate/shellac composite film and its application to mackerel fillets preservation.

In this research, the carvacrol (CAR) loaded cellulose acetate phthalate (CAP) /shellac (SH) films were prepared via electrostatic repulsion strategy and casting method. The CAP/SH-CAR films demonstrated excellent tensile strength, while also exhibiting good UV light barrier and thermal stability. The results showed that the addition of CAR significantly improved the barrier of the CAP film to water vapor and oxygen permeability. When the addition amount of CAR was 0.9 % (w/w) with respect to CAP content, the CAP/SH-CAR films exhibited good antibacterial activity and effectively reduced the growth of S. aureus and E. coli by approximately 47.9 % and 50.9 %, respectively. The presence of SH improved the retention rate of CAR in CAP/SH-CAR films, with the retention rate ranging from 45.2 to 56.8 %. Finally, the CAP/SH-CAR films were applied to preserve the mackerel fillets, indicating that the rate of freshness deterioration had been delayed and showing a good freshness preservation effect. Therefore, the CAP/SH-CAR films have the potential to be used as food packaging materials.

Sustained release, antimicrobial, and antioxidant properties of modified porous starch-based biodegradable polylactic acid/polybutylene adipate-co-terephthalate/thermoplastic starch active packaging film.

Porous starch (PS) is a modified starch with commendable biodegradable and adsorption properties. PS exhibits poor thermal stability, and the aqueous solution casting method is conventionally used for PS-activated packaging films. This approach limits the large-scale production of films and makes it difficult to play the functions of porous pores. In this study, PS was prepared by enzymatic digestion combined with freeze-drying and adsorbed with clove essential oil (CEO) after cross-linking with sodium trimetaphosphate. Subsequently, a novel PLA/PBAT/TPS/ScPS-CEO sustained release active packaging film was prepared by blending PLA, PBAT, TPS, and ScPS-CEO using industrial melt extrusion. Compared with PS, ScPS effectively slowed down the release of CEO from the film, with the maximum release of active substances at equilibrium increasing by approximately 100 %, which significantly enhanced the persistence of the antimicrobial and antioxidant properties. The polylactic acid/poly (butylene adipate-co-terephthalate)/thermoplastic starch/trimetaphosphate-crosslinked porous starch incorporated with clove essential oil (PLA/PBAT/TPS/ScPS-CEO) film could reduce the proteolysis, lipid oxidation and microbial growth of salmon, extending its shelf life by approximately 100 % at 4 °C. These results indicate that the ScPS can be used in fresh packaging material in practical applications.

Antioxidant mechanism of a continuous microenvironment regulation system for prolonging the shelf-life of red grapes.

Red grapes (Vitis vinifera L.) have a high sugar content, thin skins, and relatively short shelf-life after harvesting. We developed polylactic acid/polybutylene succinate film, prepared by extrusion of polylactic acid and polybutylene succinate, that significantly prolonged the shelf-life of red grapes from 8 to 12 days by delaying the loss of weight, loss of hardness, and reduction in soluble solid content after harvesting. Further mechanistic study showed that this modified atmosphere film delayed the senescence of harvested red grape, the phenomenon that was highly related to the lower active oxygen species production and higher antioxidant enzyme activity compared to the non-packaged grape. The proposed continuous and dynamic microenvironment regulation system is a promising method to study the mechanisms of respiratory metabolism in fruit and extends food shelf-life while reducing food waste. PRACTICAL APPLICATION: In this study, we designed a means to microenvironmental regulatory packaging that directly creates a continuous, dynamic, and monitorable microenvironment. To ensure that the fruit inside the package underwent coordinated aerobic and anaerobic respiration, we melt-extruded polylactic acid (PLA) and polybutylene succinate (PBS) to form a homogeneous biodegradable film. We demonstrated that the best preservation results were achieved with a film comprising an 80/20 PLA-to-PBS ratio. This film can prolong the shelf-life of fruits by regulating respiratory metabolism.

Covalent Grafting of 5-Aminolevulinic Acid onto Polylactic Acid Films and Their Photodynamic Potency in Preserving Salmon.

A novel photodynamic inactivation (PDI)-mediated antimicrobial film of polylactic acid/5-aminolevulinic acid (PLA/ALA) was successfully fabricated by a covalent grafting method using low-temperature plasma. The chemical structure, surface morphology, hydrophilic ability, and mechanical and barrier properties of the films were characterized, and their antibacterial, anti-biofilm potency and preservation effects on ready-to-eat salmon were investigated during storage. Results showed that the amino group of ALA was covalently grafted with the carboxyl group on the surface of PLA after the plasma treatment, with the highest grafting rate reaching ∼50%. The fabricated PLA/ALA films displayed an enhanced barrier ability against water vapor and oxygen. Under blue light-emitting diode illumination, the PLA/ALA films generated massive reactive oxygen species from the endogenous porphyrins in cells induced by ALA and then fatally destroyed the cell wall of planktonic cells and the architectural structures of sessile biofilms of the pathogens (Listeria monocytogenes and Vibrio parahaemolyticus) and spoilage bacterium (Shewanella putrefaciens). More importantly, the PDI-mediated PLA/ALA films potently inhibited 99.9% native bacteria on ready-to-eat salmon and significantly suppressed the changes of its drip loss, pH, and lipid oxidation (MDA) during storage, and on this basis, the shelf life of salmon was extended by 4 days compared with that of the commercial polyethylene film. Therefore, the PDI-mediated PLA/ALA films are valid in inactivating harmful bacterial and preserving the quality of seafood.

Evaluation of the slow-release polylactic acid/polyhydroxyalkanoates active film containing oregano essential oil on the quality and flavor of chilled pufferfish (Takifugu obscurus) fillets.

Active packaging is an innovative and effective way to extend the shelf life of food, but few studies have focused on the effect of its active ingredients on food flavor. This study aimed to develop slow-release polylactic acid/polyhydroxyalkanoates (PLA/PHA) active packaging containing oregano essential oil (OEO) and investigate the effect of active composite packaging on the flavor and quality of pufferfish fillets. The plasticizing effect of OEO increased the elongation at break (EAB) of the films from 23.36% to 65.80%. The adsorption of montmorillonite (MMT) reduces the loss of OEO during processing. The amount of active substance (carvacrol) released from PLA/PHA/OEO/MMT film to pufferfish was 9.70 mg/kg. The pufferfish fillets packed in PLA/PHA/OEO/MMT film showed the slightest difference on the 8th day from the beginning of storage. The slow-release composite films could extend the shelf life of pufferfish fillets by 2-3 days at 4 °C ± 1 °C.

Characterization of PLA-P3,4HB active film incorporated with essential oil: Application in peach preservation.

This study aimed to develop an active film by using biodegradable materials and antioxidant essential oils to improve gas and water vapor permeability during peach preservation. O2 and CO2 volume fractions and water status were investigated by using an oxygen meter and conducting low-field nuclear magnetic resonance (LF-NMR), respectively. Results revealed that the film added with angelica essential oil (AEO) had a 49.4% increase in 2,2-diphenyl-1-picrylhydrazyl free radical scavenging activity and high O2 and CO2 transmission rates and water vapor permeability. The film added with AEO showed the best preservation effect, effectively delaying the oxidation of peach, maintained the combined water, and extended the shelf life of peaches to more than 15 days. This study provided a relatively new LF-NMR method for tracking the internal water status of packaged peaches and served as an effective reference for the development of active food packaging.

Solution-processed fullerene-based organic Schottky junction devices for large-open-circuit-voltage organic solar cells.

A solution-processed fullerene-based organic Schottky junction photovoltaic device is fabricated to produce a large open circuit voltage, 0.85-0.95 V, which is higher than that of most organic bulk-heterojunction devices. A power conversion efficiency of 5% is achieved in fullerene-derivative [6,6]-phenyl-C71-butyric acid methylester-based Schottky junction devices.

A continuous and adsorptive bioprocess for efficient production of the natural aroma chemical 2-phenylethanol with yeast.

Natural 2-phenylethanol is a high value aroma chemical and can be produced from l-phenylalanine via Ehrlich pathway by yeasts. Due to serious product inhibition, the space-time yield is usually low. A continuous approach using macroporous resin as in situ adsorbent made it possible that the quantity and viability of the cells were improved simultaneously. With Saccharomyces cerevisiae sp. strain R-UV3, the highest space-time yield of 0.90 gL(-1)h(-1) reported so far was obtained.

Aqueous-solution-processed hybrid solar cells from poly(1,4-naphthalenevinylene) and CdTe nanocrystals.

Poly(1,4-naphthalenevinylene), prepared from a water-soluble precursor, was used to fabricate hybrid solar cells by blending with water-soluble CdTe nanocrystals (NCs) to act as the photoactive layer. In composites with CdTe NCs as the electron acceptors in a bulk heterojunction configuration, the devices exhibited a short-circuit current density of -6.14 mA/cm(2), an open-circuit voltage of 0.44 V, a fill factor of 0.32, and a power conversion efficiency of 0.86% under AM1.5G conditions. Because the devices were fabricated from water-soluble materials, the procedure was generally simple and environmentally friendly in comparison to the conventional devices fabricated from oil-soluble materials.