Conformal coating by multilayer nano-encapsulation for the protection of human pancreatic islets: In-vitro and in-vivo studies.

To improve the efficiency of pancreatic islet transplantation, we performed in-vitro and in-vivo experiments with isolated human pancreatic islets coated by multi-layer nano-encapsulation using differently charged polymers [chitosan and poly(sodium styrene sulfonate)] to obtain up to 9 layers. The islet coating (thickness: 104.2 ±â€¯4.2 nm) was uniform, with ≥ 90% cell viability and well preserved beta- and alpha-cell ultrastructure. Nano-encapsulated islets maintained physiological glucose-stimulated insulin secretion by both static incubation and perifusion studies. Notably, palmitate- or cytokine-induced toxicity was significantly reduced in nano-coated islets. Xenotransplantation of nano-encapsulated islets under the kidney capsule of streptozotocin-induced C57Bl/6J diabetic mice allowed long term normal or near normal glycemia, associated with minimal infiltration of immune cell into the grafts, well preserved islet morphology and signs of re-vascularization. In summary, the multi-layer nano-encapsulation approach described in the present study provides a promising tool to effectively protect human islets both in-vitro andin-vivo conditions.

Reproducibility warning: The curious case of polyethylene glycol 6000 and spheroid cell culture.

Reproducibility of results is essential for a well-designed and conducted experiment. Several reasons may originate failure in reproducing data, such as selective reporting, low statistical power, or poor analysis. In this study, we used PEG6000 samples from different distributors and tested their capability inducing spheroid formation upon surface coating. MALDI-MS, NMR, FTIR, and Triple SEC analysis of the different PEG60000s showed nearly identical physicochemical properties different, with only minor differences in mass and hydrodynamic radius, and AFM analysis showed no significant differences in the surface coatings obtained with the available PEG6000s. Despite these similarities, just one showed a highly reproducible formation of spheroids with different cell lines, such as HT-29, HeLa, Caco2, and PANC-1. Using the peculiar PEG6000 sample and a reference PEG6000 chosen amongst the others as control, we tested the effect of the cell/PEG interaction by incubating cells in the PEG solution prior to cell plating. These experiments indicate that the spheroid formation is due to direct interaction of the polymer with the cells rather than by interaction of cells with the coated surfaces. The experiments point out that for biological entities, such as cells or tissues, even very small differences in impurities or minimal variations in the starting product can have a very strong impact on the reproducibility of data.

Patchy Amphiphilic Dendrimers Bind Adenovirus and Control Its Host Interactions and in Vivo Distribution.

The surface of proteins is heterogeneous with sophisticated but precise hydrophobic and hydrophilic patches, which is essential for their diverse biological functions. To emulate such distinct surface patterns on macromolecules, we used rigid spherical synthetic dendrimers (polyphenylene dendrimers) to provide controlled amphiphilic surface patches with molecular precision. We identified an optimal spatial arrangement of these patches on certain dendrimers that enabled their interaction with human adenovirus 5 (Ad5). Patchy dendrimers bound to the surface of Ad5 formed a synthetic polymer corona that greatly altered various host interactions of Ad5 as well as in vivo distribution. The dendrimer corona (1) improved the ability of Ad5-derived gene transfer vectors to transduce cells deficient for the primary Ad5 cell membrane receptor and (2) modulated the binding of Ad5 to blood coagulation factor X, one of the most critical virus-host interactions in the bloodstream. It significantly enhanced the transduction efficiency of Ad5 while also protecting it from neutralization by natural antibodies and the complement system in human whole blood. Ad5 with a synthetic dendrimer corona revealed profoundly altered in vivo distribution, improved transduction of heart, and dampened vector sequestration by liver and spleen. We propose the design of bioactive polymers that bind protein surfaces solely based on their amphiphilic surface patches and protect against a naturally occurring protein corona, which is highly attractive to improve Ad5-based in vivo gene therapy applications.

Additives for vaccine storage to improve thermal stability of adenoviruses from hours to months.

Up to 80% of the cost of vaccination programmes is due to the cold chain problem (that is, keeping vaccines cold). Inexpensive, biocompatible additives to slow down the degradation of virus particles would address the problem. Here we propose and characterize additives that, already at very low concentrations, improve the storage time of adenovirus type 5. Anionic gold nanoparticles (10-8-10-6 M) or polyethylene glycol (PEG, molecular weight ∼8,000 Da, 10-7-10-4 M) increase the half-life of a green fluorescent protein expressing adenovirus from ∼48 h to 21 days at 37 °C (from 7 to >30 days at room temperature). They replicate the known stabilizing effect of sucrose, but at several orders of magnitude lower concentrations. PEG and sucrose maintained immunogenicity in vivo for viruses stored for 10 days at 37 °C. To achieve rational design of viral-vaccine stabilizers, our approach is aided by simplified quantitative models based on a single rate-limiting step.

Microscopical characterization of nanocapsules templated on ionic crystals and biological cells toward biomedical applications.

Nanocapsules, fuzzy assemblies of polyelectrolyte, represent a comparatively new class of colloids with controlled nanostructure and tunable properties. Due to the fact that the core as well as the dissolution influences the wall texture and the properties of the hollow capsules, the use of carbonate crystals as template is most convenient. Yeast cells constitute as a core candidate as well. They are a good system for testing the protective ability of shells and the permeability of the walls with respect to the needs of biological systems, namely, feeding and stability against attacks. The main features of the nanocapsules have been studied by two-photon, confocal, and atomic force microscopy. Nanocapsules are of biomedical interest because they can be used, for example, for the controlled release and targeting of drugs as well as for the protection of enzymes, proteins, and foreign cells.

Nanocapsules: coating for living cells.

One of the most promising tools for future applications in science and medicine is the use of nanotechnologies. Especially self-assembly systems, e.g., polyelectrolyte (PE) capsules prepared by means of the layer-by-layer technique with tailored properties, fulfill the requirements for nano-organized systems in a satisfactory manner. The nano-organized shells are suitable as coating for living cells or artificial tissue to prevent immune response. With these shells, material can be delivered to predefined organs. In this paper, some preliminary results are presented, giving a broad overview over the possibilities to use nano-organized capsules. Based on the observations that the cells while duplicating break the capsule a mutant yeast strain (Saccharomyces cerevisiae), which express GFP-tubulin under galactose promotion, was investigated by means of confocal laser scanning microscopy. The measurements reveal an increased surface charge in the region of buds developed prior encapsulation. In order to test the used PE pair for cytotoxicity, germinating conidia of the fungi Neurospora crassa were coated. The investigation with fluorescence microscopy shows a variation in the surface charge for the growing region and the conidium poles. The capsules exhibit interesting properties as valuable tool in science and a promising candidate for application in the field of medicine.

A novel class of potential prion drugs: preliminary in vitro and in vivo data for multilayer coated gold nanoparticles.

Gold nanoparticles coated with oppositely charged polyelectrolytes, such as polyallylamine hydrochloride and polystyrenesulfonate, were examined for potential inhibition of prion protein aggregation and prion (PrPSc) conversion and replication. Different coatings, finishing with a positive or negative layer, were tested, and different numbers of layers were investigated for their ability to interact and reduce the accumulation of PrPSc in scrapie prion infected ScGT1 and ScN2a cells. The particles efficiently hampered the accumulation of PrPSc in ScN2a cells and showed curing effects on ScGT1 cells with a nanoparticle concentration in the picomolar range. Finally, incubation periods of prion-infected mice treated with nanomolar concentrations of gold nanoparticles were significantly longer compared to untreated controls.

Structural stability of green fluorescent proteins entrapped in polyelectrolyte nanocapsules.

Molecules of a green fluorescent protein mutant, GFPmut2, have been immobilized in nanocapsules, assemblies of charged polyelectrolyte multilayers, with the aim to study the effect of protein-polyelectrolyte interactions on the protein stability against chemical denaturation. GFPmut2 proteins turn out to be stabilized and protected against the denaturating action of small chemical compounds. The nanocapsule protective effect on GFPmut2 is likely due to protein interactions with the negatively charged polymers, that induce an increase in the local rigidity of the protein nano-environment. This suggestion is supported by Fluorescence Polarization measurements on GFPmut2 proteins bound to the NC layers.

Deformation and adhesion of elastomer poly(dimethylsiloxane) colloidal AFM probes.

We report on the synthesis and characterization of elastomer colloidal AFM probes. Poly(dimethylsiloxane) microparticles, obtained by water emulsification and cross-linking of viscous prepolymers, are glued to AFM cantilevers and used for contact mechanics investigations on smooth substrates: in detail cyclic loading-unloading experiments are carried on ion-sputtered mica, the deformation rate and dwell time being separately controlled. We analyze load-penetration curves and pull-off forces with models due respectively to Zener; Maugis and Barquins; and Greenwood and Johnson and account for bulk creep, interfacial viscoelasticity, and structural rearrangements at the polymer-substrate interface. A good agreement is found between experiments and theory, with a straightforward estimation of colloidal probes' material parameters. We suggest the use of such probes for novel contact mechanics experiments involving fully reversible deformations at the submicrometer scale.

Multilayer nanoencapsulation. New approach for immune protection of human pancreatic islets.

Immune protection of artificial tissue by means of pancreatic islet microencapsulation is a very ambitious new approach to avoid life-long immune suppression. But the success in the utilization of the alginate-beads with incorporated islets is unfortunately limited. Some of the problems cannot be solved by a two-component system, so polymer encapsulation of the microbeads was tested to improve the properties. In the present paper a pure nanoencapsulation multilayer approach was tested in order to reduce the size of the capsule and possibly apply in the future a multilayer capsule with individual properties in each layer or region of the capsule. Different polycations were attached in a self-assembly process. The advantage in using the surface charge of islets as binding site for the polyions is the guarantee of complete coverage after the second layer. Release of insulin was determined to characterize the function of the islets after encapsulation as well as the permeability of the capsule. Fluorescence microscopy was used to visualize the polyelectrolyte layers. Finally by means of an immune assay, the protection capability of the capsule was proved. In these first measurements the encapsulation with a multilayer nanocapsule was shown to be a possible alternative to the more space-consuming and random islet-trapping microencapsulation.

Kinetics of phospholipid insertion into monolayers containing the lung surfactant proteins SP-B or SP-C.

The lung surfactant proteins SP-B and SP-C are pivotal for fast and reversible lipid insertion at the air/liquid interface, a prerequisite for functional lung activity. We used a model system consisting of a preformed monolayer at the air/liquid interface supplemented with surfactant protein SP-B or SP-C and unilamellar vesicles injected into the subphase of a film balance. The content of SP-B or SP-C was similar to that found in lung lavage. In order to elucidate distinct steps of lipid insertion, we measured the time-dependent pressure increase as a function of the initial surface pressure, the temperature and the phosphatidylglycerol content by means of surface tension measurements and scanning force microscopy (SFM). The results of the film balance study are indicative of a two-step mechanism in which initial adsorption of vesicles to the protein-containing monolayer is followed by rupture and integration of lipid material. Furthermore, we found that vesicle adsorption on a preformed monolayer supplemented with SP-B or SP-C is strongly enhanced by negatively charged lipids as provided by DPPG and the presence of Ca2+ ions in the subphase. Hence, long-range electrostatic interactions are thought to play an important role in attracting vesicles to the surface, being the initial step in replenishment of lipid material. While insertion into the monolayer is independent of the type of protein SP-B or SP-C, initial adsorption is faster in the presence of SP-B than SP-C. We propose that the preferential interaction between SP-B and negatively charged DPPG leads to accumulation of negative charges in particular regions, causing strong adhesion between DPPG-containing vesicles and the monolayer mediated by Ca2+ ions, which eventually causes flattening and rupture of attached liposomes as observed by in situ SFM.