First Report of Anthracnose on Wurfbainia villosa var. villosa Caused by Colletotrichum gloeosporioides in China.

Wurfbainia villosa var. villosa is a traditional Chinese herbal medicine under the family Zingiberaceae, and its ripe fruits (called Fructus Amomi) are widely used clinically for the treatment of gastrointestinal disorders (Yang et al. 2023; Chen et al. 2023). In September 2023, plants of W. villosa var. villosa exhibited anthracnose-like symptoms on leaf with a disease incidence of 35% (n = 100 investigated plants) in an approximately 90 m2 field in Guangning, China (N23°42'51.70″, E112°26'35.75″). Light yellowish-green spots (~2 mm diameter) initially appeared on the infected leaves, gradually formed sub-circular or irregular spots, then fused and expanded, resulting in wilting of the leaves. To identify the causal agent, 10 symptomatic leaves were collected and transferred to the laboratory. The symptomatic leaf samples were surface sterilized in 0.5% NaClO for 2 min, and in 70% ethanol for 30 s, then washed three times with sterile water and air-dried on sterile filter paper. The leaf tissues were placed on potato dextrose agar (PDA) medium containing 100 µg mL-1 of ampicillin (Sigma-Aldrich, St. Louis, MO) and incubated for 7 days at 28°C in darkness. Nine isolates with similar colony morphology were isolated from the 10 plated leaves. Three representative isolates (GNAF03, GNAF06, GNAF09 with approximately 3.5 cm in diameter after 3 days of incubation) appeared gray to dark brown with dense aerial hyphae at the front and gray to black colonies on the reverse of the plates. Conidia were cylindrical and measured 21.2 to 29.3 µm long × 7.1 to 9.6 µm wide (n = 50). Appressoria were formed by the tips of germ tubes or hyphae and were brown, ellipsoid, thick-walled, and smooth-margined, measuring 10.2 to 12.3 µm long × 6.4 to 8.2 µm wide (n = 50). Morphologically, the fungal isolates resembled Colletotrichum sp. (Weir et al. 2012). For molecular analysis, genomic DNA was extracted from fresh mycelia of the three isolates, and the primers ACT-512F/ACT-783R, CL1/CL2A, GDF/GDR, and ITS1/ITS4 were used to amplify partial regions of rDNA-ITS, actin (ACT), calmodulin (CAL), and glyceraldehyde-3-phosphate dehydrogenase (GAPDH) regions, respectively (Weir et al. 2012). The resulting sequences with more than 99% nucleotide identity to C. gloeosporioides were submitted to GenBank (accession numbers PP552725, PP552726, and OR827444 for ACT; PP552727, PP552728, and OR827443 for CAL; PP552729, PP552730, and OR827445 for GAPDH; PP549996, PP549999, and OR841394 for ITS). A phylogenetic tree was generated by the maximum likelihood method using the concatenated sequences of ACT, CAL, GADPH, and ITS by Polysuite software (Damm et al. 2020). Based on morphological and molecular analysis, the three isolates were characterized as C. gloeosporioides. The pathogenicity of the GNAF09 isolate was assessed on W. villosa var. villosa seedling leaves inoculated by spraying with 40 µL of conidial suspension at 106 conidia mL-1 or wounded with a sterile toothpick then inoculated with mycelial agar plugs (5 mm diameter). Control leaves were inoculated with 40 µL of sterile distilled water or agar plugs without mycelia. The inoculated plants were placed in a humid chamber at 28°C with 80% humidity and a 12 h light-dark photoperiod. Symptoms similar to those seen on naturally infected leaves were observed on all inoculated leaves after 7 days inoculation. Re-isolation was performed from 80% of the inoculated leaves and isolates were confirmed as C. gloeosporioides morphologically, confirming Koch's postulates, and by sequencing the ACT, CAL, GADPH, and ITS regions. The control groups remained asymptomatic. In previous studies, C. gloeosporioides has also caused anthracnose on Chinese medicinal plants, including Baishao (Radix paeoniae alba) (Zhang et al. 2017) and Rubia cordifolia L. (Tang et al. 2020). To our knowledge, this is the first report of C. gloeosporioides causing anthracnose on W. villosa var. villosa in China. The results of our report serve as valuable references for further research on this disease.

Wnt3α and transforming growth factor-ß induce myofibroblast differentiation from periodontal ligament cells via different pathways.

Myofibroblasts are specialized cells that play a key role in connective tissue remodeling and reconstruction. Alpha-smooth muscle actin (α-SMA), vimentin and tenascin-C are myofibroblast phenotype, while α-SMA is the phenotypic marker. The observation that human periodontal ligament cells (hPDLCs) differentiate into myofibroblasts under orthodontic force has provided a new perspective for understanding of the biological and biomechanical mechanisms involved in orthodontic tooth movement. However, the cell-specific molecular mechanisms leading to myofibroblast differentiation in the periodontal ligament (PDL) remain unclear. In this study, we found that expression of Wnt3α, transforming growth factor-ß1 (TGF-ß1), α-SMA and tenascin-C increased in both tension and compression regions of the PDL under orthodontic load compared with unloaded control, suggesting that upregulated Wnt3α and TGF-ß1 signaling might have roles in myofibroblast differentiation in response to orthodontic force. We reveal in vitro that both Wnt3α and TGF-ß1 promote myofibroblast differentiation from hPDLCs. Dickkopf-1 (DKK1) impairs Wnt3α-induced myofibroblast differentiation in a ß-catenin-dependent manner. TGF-ß1 stimulates myofibroblast differentiation via a JNK-dependent mechanism. DKK1 has no significant effect on TGF-ß1-induced myofibroblastic phenotype.

Poly(ethylenimine)-Cyclodextrin-Based Cationic Polymer Mediated HIF-1α Gene Delivery for Hindlimb Ischemia Treatment.

Hindlimb ischemia is a common disease worldwide featured by the sudden decrease in limb perfusion, which usually causes a potential threat to limb viability and even amputation or death. Revascularization has been defined as the gold-standard therapy for hindlimb ischemia. Considering that vascular injury recovery requires cellular adaptation to the hypoxia, hypoxia-inducible factor 1 α (HIF-1α) is a potential gene for tissue restoration and angiogenesis. In this manuscript, effective gene delivery vector PEI-ß-CD (PC) was reported for the first application in the hindlimb ischemia treatment to deliver HIF-1α plasmid in vitro and in vivo. Our in vitro finding demonstrated that PC/HIF-1α-pDNA could be successfully entered into the cells and mediated efficient gene transfection with good biocompatibility. More importantly, under hypoxic conditions, PC/HIF-1α-pDNA could up-regulate the HUEVC cell viability. In addition, the mRNA levels of VEGF, Ang-1, and PDGF were upregulated, and transcriptome results also demonstrated that the cell-related function of response to hypoxia was enhanced. The therapeutic effect of PC/HIF-1α-pDNA was further estimated in a murine acute hindlimb ischemia model, which demonstrated that intramuscular injection of PC/HIF-1α-pDNA resulted in significantly increased blood perfusion and alleviation in tissue damage, such as tissue fibrosis and inflammation. The results provide a rationale that HIF-1α-mediated gene therapy might be a practical strategy for the treatment of limb ischemia.

Facile preparation of self-healing hydrogels based on chitosan and PVA with the incorporation of curcumin-loaded micelles for wound dressings.

The increased demand for improved strategies for wound healing has, in recent years, motivated the development of multifunctional hydrogels with favorable bio-compatibility and antibacterial properties. To this regard, the current study presented the design of a novel self-healing composite hydrogel that could perform as wound dressing for the promotion of wound healing. The composite hydrogels were composed of polyvinyl alcohol (PVA), borax and chitosan functionalized with sialic acid (SA-CS) and curcumin loaded pluronic F127 micelles. The hydrogels were formed through the boronic ester bond formation between PVA, SA-CS and borax under physiological conditions and demonstrated adjustable mechanical properties, gelation kinetics and antibacterial properties. When incubating with NIH3T3 cells, the hydrogels also demonstrated good biocompatibility. These aspects offer a promising foundation for their prospective applications in developing clinical materials for wound healing.

Genipin crosslinked quaternary ammonium chitosan hydrogels for wound dressings.

Bacterial infection can lead to various complications, such as inflammations on surrounding tissues, which can prolong wound healing and thus represent a significant clinical and public healthcare problem. Herein, a report on the fabrication of a novel genipin/quaternized chitosan (CS) hydrogel for wound dressing is presented. The hydrogel was prepared by mixing quaternized CS and genipin under 35 °C bath. The hydrogels showed porous structure (250-500 µm) and mechanical properties (3000-6000 Pa). In addition, the hydrogels displayed self-healing ability and adhesion performance on different substrates. Genipin crosslinked quaternized CS hydrogels showed antibacterial activities againstE. coliandS. aureus. The CCK-8 and fluorescent images confirmed the cytocompatibility of hydrogels by seeding with NIH-3T3 cells. The present study showed that the prepared hydrogel has the potential to be used as wound dressing.

Nonsurgical correction of a Class III malocclusion in an adult by miniscrew-assisted mandibular dentition distalization.

This article reports the successful use of miniscrews in the mandible to treat a 20-year-old Mongolian woman with a chief complaint of anterior crossbite. The patient had a skeletal Class III malocclusion with a mildly protrusive mandible, an anterior crossbite, and a deviated midline. In light of the advantages for reconstruction of the occlusal plane and distal en-masse movement of the mandibular arch, we used a multiloop edgewise archwire in the initial stage. However, the maxillary incisors were in excessive labioversion accompanied by little retraction of the mandibular incisors; these results were obviously not satisfying after 4 months of multiloop edgewise archwire treatment. Two miniscrews were subsequently implanted vertically in the external oblique ridge areas of the bilateral mandibular ramus as skeletal anchorage for en-masse distalization of the mandibular dentition. During treatment, the mandibular anterior teeth were retracted about 4.0 mm without negative lingual inclinations. The movement of the mandibular first molar was almost bodily translation. The maxillary incisors maintained good inclinations by rotating their brackets 180° along with the outstanding performance of the beta-titanium wire. The patient received a harmonious facial balance, an attractive smile, and ideal occlusal relationships. The outcome was stable after 1 year of retention. Our results suggest that the application of miniscrews in the posterior area of the mandible is an effective approach for Class III camouflage treatment. This technique requires minimal compliance and is particularly useful for correcting Class III patients with mild mandibular protrusion and minor crowding.

Guided Bone Regeneration in a Periodontally Compromised Individual with Autogenous Tooth Bone Graft: A Radiomics Analysis.

BACKGROUND: Autogenous tooth bone graft material (AutoBT) has been advocated as a bone substitute when conducting alveolar ridge preservation. This study is aimed at using a radiomics approach in order to evaluate and testify whether AutoBT can stimulate bone growth during socket preservation in severe periodontal cases. MATERIALS AND METHODS: For this study, 25 cases with severe periodontal diseases were selected. The patients' AutoBTs were inserted into the extraction sockets and covered with Bio-Gide® collagen membranes. 3D CBCT scans and 2D X-rays were taken of the patients before surgery and after 6 months post-surgery. For the retrospective radiomics analysis, the maxillary and mandibular images were compared in different groups. Maxillary bone height was analyzed at the buccal, middle, and palatal crest sites, while the mandibular bone height was compared at the buccal, center, and lingual crest sites. RESULTS: In the maxilla, the alveolar height was increased by -2.15 ± 2.90 mm at the buccal crest; -2.45 ± 2.36 mm at the center of the socket, and -1.62 ± 3.19 mm at the palatal crest, while the height of the buccal crest was increased by 0.19 ± 3.52 mm, and the height at the center of the socket was increased by -0.70 ± 2.71 mm in the mandible. The three-dimensional radiomics analysis demonstrated significant bone growth in the local alveolar height and high density. CONCLUSION: Based on clinical radiomics analysis, AutoBT could be used as an alternative bone material in socket preservation after tooth extraction in patients with severe periodontitis.

Robust and adhesive lignin hybrid hydrogel as an ultrasensitive sensor.

The fabrication of hydrogel for sensing purposes remains to be a challenge since the hydrogel needs to have both good mechanical strength and adhesiveness. This work reports a robust and adhesive hydrogel mainly constructed with AgNPs@lignin, polyacrylamide (PAM) and sodium alginate (SA). The silver nanoparticles (AgNPs) were in-situ generated via the reaction between lignin and silver ammonia ([Ag(NH3)2]+). The resultant lignin hybrid hydrogel exhibited a stress, strain and tearing energy up to 0.055 MPa, 1000% and 250 J·m-2, respectively. Furthermore, the hydrogel adhered to different materials with an adhesion energy of higher than 230 J·m-2. This hydrogel was demonstrated to be an ideal sensing material since it could detect both large-scale motions and tiny physiological signals including breathing and pulse. The hydrogel also exhibited good antibacterial performance and biocompatibility. This work provides a good example to design a lignin-based high-performance hydrogel material for sensing purposes.

Analysis of the risk of death and clinical management for nasal or nasopharyngeal bleeding occurring after radiotherapy for nasopharyngeal carcinoma.

OBJECTIVE: To retrospectively analyze the risk factors for death in patients with nasal or nasopharyngeal bleeding after radiotherapy for nasopharyngeal carcinoma, and to explore clinical management strategies for the disease. METHODS: This was a retrospective case-control study. The clinical data from patients diagnosed with nasopharyngeal or nasopharyngeal hemorrhage after radiotherapy for nasopharyngeal carcinoma at the First Affiliated Hospital of Guangxi Medical University between January 2006 and October 2021 were retrospectively analyzed. Chi-square analysis and odds ratio (OR) calculation were performed to evaluate the death risk factors associated with the disease. And binary logistic regression analysis was used to detect some independent factors in this study. RESULTS: Of the 85 patients, 71 (83.5%) were male and 14 (14.5%) were female; 11 patients died (mortality rate: 12.9%), of which 9 died of asphyxia (7 with hemorrhagic shock), 1 died of multiorgan failure and acute respiratory distress syndrome, and 1 died of left cerebellar infarction. Nine potential mortality factors were evaluated; age, sex, nasal tamponade, and open mouth restriction were not significantly associated with death (P > 0.5); absence of immediate airway protection (in the major bleeding group) , absence of angiography, skull base destruction, major bleeding, and re-irradiation were significantly associated with death (P < 0.05). Among these factors, binary logistic regression model showed increased risk of death in patients without immediate airway protection (OR=18.14,95%CI:1.48-221.64), in patients without angiography (OR=14.65, 95%CI:2.37-90.73), and in those with re-irradiation (OR=13.23,95%CI:1.004-174.23). CONCLUSION: Binary logistic regression model shows that absence of immediate airway protection, absence of angiography, and re-irradiation are independent risk factors for death. The mortality rate due to bleeding after radiotherapy for nasopharyngeal carcinoma is high, and active management and intervention to address the risk factors for death is key to treat the disease and save patients' lives. At the same time, we need to consider the patient's causative state of bleeding.

Analysis of the clinical and genetic characteristics of a Chinese family with osteogenesis imperfecta type I.

BACKGROUND: Osteogenesis imperfecta type I (OI-I) is a rare genetic disorder characterized by skeletal deformity, bone fragility, blue sclerae, dentinogenesis imperfecta, and hearing loss. The current study aimed to confirm the clinical diagnosis and genetic cause of OI-I in a four-generation Chinese family. METHODS: Clinical investigation and pedigree analysis were conducted to characterize the phenotypic manifestations of a Chinese family with OI-I. Follow-up audiometry and imaging tests were used to evaluate the postoperative outcomes of stapes surgery in the proband with otosclerosis. Whole-exome sequencing (WES) and Sanger sequencing were used to identify the pathogenic gene variants and for cosegregating analysis. RESULTS: We described in detail the clinical features of the collected family with autosomal dominant OI-I, and firstly identified a pathogenic splicing variant (c.2344-1G>T) in intron 33 of COL1A1 in a Chinese family. The molecular analysis suggested that the mutation might cause splice site changes that result in a loss of gene function. The proband, who suffered from otosclerosis and presented two-side middle-severe conductive hearing loss, benefitted significantly from successive bilateral middle ear surgery. CONCLUSIONS: The diagnosis of OI-I in a Chinese family was established by clinical and genetic investigation. A heterozygous pathogenic splicing variant in COL1A1 was directly responsible for the bone fragility and hearing loss of this family. Otosclerosis surgery should be suggested to rehabilitate conductive hearing impairment in OI patients.

Incidence and risk factor analysis for swelling after apical microsurgery.

BACKGROUND: Swelling after apical microsurgery is a postoperative reaction and may reduce quality of life during healing. AIM: To evaluate periapical swelling after apical microsurgery and determine potential risk factors. METHODS: Ninety-eight apical microsurgery patients were selected for this study. Before surgery, bone shadow volume and density of pathological tissue were measured by cone beam computed tomography. The other variables (age, gender, operative teeth number, fistula, preoperative swelling, drug use and preoperative root canal treatments) were assessed during examination. Swelling degree was confirmed by questionnaires for patients on postoperative days 1, 7, 14 and 21. Statistical analyses were performed to identify predictors for swelling. RESULTS: Majority of patients reported moderate (45.9%) or severe (34.7%) swelling on day 1, and moderate (44.9%) or mild (45.9%) on postoperative day 7. Ninety-nine percent of patients had no or mild swelling on postoperative day 14. The average swelling level peaked on day 1 postoperatively and gradually decreased. Of statistical significance, age, bone shadow volume and density of pathological tissue acted as predictors of swelling (P < 0.05). However, there was no significant difference in gender, tooth number, fistula, preoperative swelling, drug use, or preoperative root canal treatments (P > 0.05). CONCLUSION: Younger patients with larger shadow volume and density were significantly more likely to develop swelling after apical microsurgery.

Bone screws of porous silicon carbide coated with tantalum improve osseointegration and osteogenesis in goat femoral neck fractures.

Traditional metal materials, such as stainless steel and titanium (Ti) alloys, are still the gold standards for fracture fixation. However, the elastic moduli of these materials differ from that of human cortical bone, and the stress shielding effect affects fracture healing, leading to secondary fractures. Herein, a new porous Ta coated SiC (pTa-SiC) scaffold using in internal fixation devices with good mechanical and biological properties was prepared based on porous silicon carbide (SiC) scaffold and tantalum (Ta) metal. The osteogenic and osseointegration properties of the pTa-SiC scaffold were investigated by bothin vitroandin vivotests. The results showed that compared with porous titanium (pTi), the pTa-SiC promoted the proliferation, migration, and osteogenic differentiation of human bone marrow-derived mesenchymal stem cells. Moreover, the internal fixation tests were carried out in a goat load-bearing femoral neck fracture model. Histological results showed good osseointegration around the pTa-SiC screws. And the acid etching results showed that bone cells grew tightly on the pTa-SiC throughout bone canaliculi, and the growth mode was contact osteogenesis, which indicated good biological fixation effects. Therefore, it is reasonable to be expected that the new pTa-SiC scaffold with excellent mechanical and biological properties could be a promising candidate for bone implant field.

Multi-sites polycyclodextrin adsorbents for removal of protein-bound uremic toxins combining with hemodialysis.

Accumulation of protein-bound uremic toxins (PBUTs) has a high incidence in the blood of hemodialysis-treated patients with chronic kidney disease. Development of adsorbent for the high-efficient, selective, and removal of various PBUTs is still challenging because of their strong interactions to the corresponding binding proteins and the complex blood background. Herein, we reported poly-cyclodextrins adsorbents with multi adsorption-sites for PBUTs removal from plasma. Compared to poly-α-cyclodextrin and poly-γ-cyclodextrin, poly-ß-cyclodextrin (PßCD) showed the best adsorption capability and the maximum p-cresol sulfate (PCS, a model PBUT) binding capacity of PßCD (263 mg g-1). Combining with hemodialysis, PßCD adsorbents added into the dialysate can remove 96 % PCS in the plasma via adsorbent once-through mode. Additionally, various PBUTs co-exsiting in the plasma could be effectively removed, exhibiting high-concentrition PBUT adsorption property of PßCD. We expect that the PCD adsorbents combining with hemodialysis therapy may become a promising potential for clinical PBUT removal.

Latent TGF-beta binding protein-1 plays an important role in craniofacial development.

OBJECTIVE: This study aims to replicate the phenotype of Ltbp1 knockout mice in zebrafish, and to address the function of LTBP1 in craniofacial development. METHODS: Whole mount in situ hybridization (WISH) of ltbp1 was performed at critical periods of zebrafish craniofacial development to explore the spatial-temporal expression pattern. Furthermore, we generated morpholino based knockdown model of ltbp1 to study the craniofacial phenotype. RESULTS: WISH of ltbp1 was mainly detected in the mandibular jaw region, brain trunk, and internal organs such as pancreas and gallbladder. And ltbp1 colocalized with both sox9a and ckma in mandibular region. Morpholino based knockdown of ltbp1 results in severe jaw malformation. Alcian blue staining revealed severe deformity of Meckel's cartilage along with the absence of ceratobranchial. Three-dimension measurements of ltbp1 morphants jaws showed decrease in both mandible length and width and increase in open mouth distance. Expression of cartilage marker sox9a and muscle marker ckma was decreased in ltbp1 morphants. CONCLUSIONS: Our experiments found that ltbp1 was expressed in zebrafish mandibular jaw cartilages and the surrounding muscles. The ltbp1 knockdown zebrafish exhibited phenotypes consistent with Ltbp1 knockout mice. And loss of ltbp1 function lead to significant mandibular jaw defects and affect both jaw cartilages and surrounding muscles.

Wheat straw components fractionation, with efficient delignification, by hydrothermal treatment followed by facilitated ethanol extraction.

Lignocellulosic biomass fractionaion into its three major components is critically important for efficient feedstock utilization. The hydrothermal-ethanol method has broad application as its first step, hydrothermal treatment, provides high hemicellulose separation efficiency. However, it severely inhibits the delignification on the subsequent ethanol extraction. In this study, the second step, ethanol extraction, was facilitated by the addition of 3% NaOH and 3% H2O2, resulting in a significant improvement of lignin separation (by 48.2%). SEM, AFM, XPS, and XRD were used to characterize the surface composition of the remaining solids (crude cellulose) while the structure of isolated lignin was characterized by FT-IR, CP/MAS 13C NMR, GPC and TGA. The lignin samples isolated with both facilitated and non-facilitated ethanol extraction were compared to elucidate the lignin removal mechanism. The results showed that lignin degradation and crosslinking/polymerization occur in parallel during both the hydrothermal treatment and ethanol extraction.

Morphological changes of lignin during separation of wheat straw components by the hydrothermal-ethanol method.

The separation efficiencies of wheat straw components by hydrothermal treatment and ethanol extraction have been compared. The results showed that the lignin removal rate by two-step hydrothermal-ethanol method was significantly lower than that of single-step ethanol extraction. Microscopic and adsorption studies (using SEM/AFM, XPS and pore structure analysis) showed that during the hydrothermal treatment a large lignin fraction migrated from the intercellular layer and cell wall and deposited on the fiber surface. Furthermore, the deposited lignin then spread on the fiber surface to form a lignin coating layer, which prevented its dissolution in ethanol. Without prior heating, i.e., upon a single step ethanol extraction, the massive lignin deposition was avoided, presumably due to its efficient dissolution hindering its tight binding with carbohydrate polymers on the fiber surface. Therefore, the lignin removal efficiency was drastically reduced as a result of hydrothermal treatment compared to ethanol extraction.

Latent TGF-beta binding protein-1 plays an important role in craniofacial development

Abstract Objective: This study aims to replicate the phenotype of Ltbp1 knockout mice in zebrafish, and to address the function of LTBP1 in craniofacial development. Methods: Whole mount in situ hybridization (WISH) of ltbp1 was performed at critical periods of zebrafish craniofacial development to explore the spatial-temporal expression pattern. Furthermore, we generated morpholino based knockdown model of ltbp1 to study the craniofacial phenotype. Results: WISH of ltbp1 was mainly detected in the mandibular jaw region, brain trunk, and internal organs such as pancreas and gallbladder. And ltbp1 colocalized with both sox9a and ckma in mandibular region. Morpholino based knockdown of ltbp1 results in severe jaw malformation. Alcian blue staining revealed severe deformity of Meckel's cartilage along with the absence of ceratobranchial. Three-dimension measurements of ltbp1 morphants jaws showed decrease in both mandible length and width and increase in open mouth distance. Expression of cartilage marker sox9a and muscle marker ckma was decreased in ltbp1 morphants. Conclusions: Our experiments found that ltbp1 was expressed in zebrafish mandibular jaw cartilages and the surrounding muscles. The ltbp1 knockdown zebrafish exhibited phenotypes consistent with Ltbp1 knockout mice. And loss of ltbp1 function lead to significant mandibular jaw defects and affect both jaw cartilages and surrounding muscles.

Inhibition of Ape1 Redox Activity Promotes Odonto/osteogenic Differentiation of Dental Papilla Cells.

Dentinogenesis is the formation of dentin, a substance that forms the majority of teeth, and this process is performed by odontoblasts. Dental papilla cells (DPCs), as the progenitor cells of odontoblasts, undergo the odontogenic differentiation regulated by multiple cytokines and paracrine signal molecules. Ape1 is a perfect paradigm of the function complexity of a biological macromolecule with two major functional regions for DNA repair and redox regulation, respectively. To date, it remains unclear whether Ape1 can regulate the dentinogenesis in DPCs. In the present study, we firstly examed the spatio-temporal expression of Ape1 during tooth germ developmental process, and found the Ape1 expression was initially high and then gradually reduced along with the tooth development. Secondly, the osteo/odontogenic differentiation capacity of DPCs was up-regulated when treated with either Ape1-shRNA or E3330 (a specific inhibitor of the Ape1 redox function), respectively. Moreover, we found that the canonical Wnt signaling pathway was activated in this process, and E3330 reinforced-osteo/odontogenic differentiation capacity was suppressed by Dickkopf1 (DKK1), a potent antagonist of canonical Wnt signaling pathway. Taken together, we for the first time showed that inhibition of Ape1 redox regulation could promote the osteo/odontogenic differentiation capacity of DPCs via canonical Wnt signaling pathway.

Finite element analysis of rapid canine retraction through reducing resistance and distraction.

OBJECTIVE: The aims of this study were to compare different surgical approaches to rapid canine retraction by designing and selecting the most effective method of reducing resistance by a three-dimensional finite element analysis. MATERIAL AND METHODS: Three-dimensional finite element models of different approaches to rapid canine retraction by reducing resistance and distraction were established, including maxillary teeth, periodontal ligament, and alveolar. The models were designed to dissect the periodontal ligament, root, and alveolar separately. A 1.5 N force vector was loaded bilaterally to the center of the crown between first molar and canine, to retract the canine distally. The value of total deformation was used to assess the initial displacement of the canine and molar at the beginning of force loading. Stress intensity and force distribution were analyzed and evaluated by Ansys 13.0 through comparison of equivalent (von Mises) stress and maximum shear stress. RESULTS: The maximum value of total deformation with the three kinds of models occurred in the distal part of the canine crown and gradually reduced from the crown to the apex of the canine; compared with the canines in model 3 and model 1, the canine in model 2 had the maximum value of displacement, up to 1.9812 mm. The lowest equivalent (von Mises) stress and the lowest maximum shear stress were concentrated mainly on the distal side of the canine root in model 2. The distribution of equivalent (von Mises) stress and maximum shear stress on the PDL of the canine in the three models was highly concentrated on the distal edge of the canine cervix. . CONCLUSIONS: Removal of the bone in the pathway of canine retraction results in low stress intensity for canine movement. Periodontal distraction aided by surgical undermining of the interseptal bone would reduce resistance and effectively accelerate the speed of canine retraction.