Multifunctional Nanovectors Based on Polyamidoamine Polymers for Theranostic Application.

We present multifunctional, biocompatible and biodegradable magnetic nanovectors based on different polyamidoamine (PAA) polymers tailored with different diagnostic and therapeutic properties. Using maghemite nanoparticles with average size 15.5 ± 2.8 nm prepared by thermal decomposition, superparamagnetic nanovectors were obtained by coating the nanoparticles with synthetic polymers of PAA. These have a segmented copolymer structure, and bear PAA segments containing different amount of carboxyl groups per repeating units together with PEG segments. These copolymers are thought to combine the binding properties of the carboxylated PAA segments to inorganic nanoparticles, with the stealth properties of the PEG ones. The magnetic, hyperthermal and relaxometric properties of the synthesized samples were investigated. Magnetic measurements revealed that the samples are superparamagnetic at room temperature and the overall magnetic behavior is not affected by the functionalization process. Calorimetric measurements demonstrated a good heating efficiency at alternating magnetic field parameters below the human tolerability threshold (SAR of ca. 70 W/g at 260 Hz and 10.8 kA/m). 1H-NMR relaxivities were relevant compared to the values of the commercial contrast agents over the whole investigated frequency range.

Mucin Thin Layers: A Model for Mucus-Covered Tissues.

The fate of macromolecules of biological or pharmacological interest that enter the mucus barrier is a current field of investigation. Studies of the interaction between the main constituent of mucus, mucins, and molecules involved in topical transmucoidal drug or gene delivery is a prerequisite for nanomedicine design. We studied the interaction of mucin with the bio-inspired arginine-derived amphoteric polymer d,l-ARGO7 by applying complementary techniques. Small angle X-ray scattering in bulk unveiled the formation of hundreds of nanometer-sized clusters, phase separated from the mucin mesh. Quartz microbalance with dissipation and neutron reflectometry measurements on thin mucin layers deposited on silica supports highlighted the occurrence of polymer interaction with mucin on the molecular scale. Rinsing procedures on both experimental set ups showed that interaction induces alteration of the deposited hydrogel. We succeeded in building up a new significant model for epithelial tissues covered by mucus, obtaining the deposition of a mucin layer 20 Å thick on the top of a glycolipid enriched phospholipid single membrane, suitable to be investigated by neutron reflectometry. The model is applicable to unveil the cross structural details of mucus-covered epithelia in interaction with macromolecules within the Å discreteness.

Comparison of Gene Transfection and Cytotoxicity Mechanisms of Linear Poly(amidoamine) and Branched Poly(ethyleneimine) Polyplexes.

PURPOSE: This study aimed to further explore the mechanisms behind the ability of certain linear polyamidoamines (PAAs) to transfect cells with minimal cytotoxicity. METHODS: The transfection efficiency of DNA complexed with a PAA of a molecular weight over 10 kDa or 25 kDa branched polyethyleneimine (BPEI) was compared in A549 cells using a luciferase reporter gene assay. The impact of endo/lysosomal escape on transgene expression was investigated by transfecting cells in presence of bafilomycin A1 or chloroquine. Cytotoxicity caused by the vectors was evaluated by measuring cell metabolic activity, lactate dehydrogenase release, formation of reactive oxygen species and changes in mitochondrial membrane potential. RESULTS: The luciferase activity was ~3-fold lower after transfection with PAA polyplexes than with BPEI complexes at the optimal polymer to nucleotide ratio (RU:Nt). However, in contrast to BPEI vectors, PAA polyplexes caused negligible cytotoxic effects. The transfection efficiency of PAA polyplexes was significantly reduced in presence of bafilomycin A1 while chloroquine enhanced or decreased transgene expression depending on the RU:Nt. CONCLUSIONS: PAA polyplexes displayed a pH-dependent endo/lysosomal escape which was not associated with cytotoxic events, unlike observed with BPEI polyplexes. This is likely due to their greater interactions with biological membranes at acidic than neutral pH.

Sterically stabilized self-assembling reversibly cross-linked polyelectrolyte complexes with nucleic acids for environmental and medical applications.

One of the principal problems facing nucleic acid delivery systems using polyplexes is the instability of the complexes in the presence of proteins and high salt concentrations. We have used a cross-linking polymer to overcome this problem. Pendant thiol moieties have been incorporated into a PAA (polyamidoamine) homopolymer and a PEG [poly(ethylene glycol)]-PAA-PEG copolymer reported previously as a self-assembling system. When mixed with DNA, small monodisperse sterically stabilized particles are formed in quantitative yields. Optimization of the formulation resulted in nanoparticles which are stable in seawater. This cross-linked formulation has been successfully tested in both freshwater and estuarine field trials as a water tracer. Future work will develop these particles as a groundwater tracer and also for therapeutic applications of nucleic acid delivery.

Tricarbonyl-rhenium complexes of a thiol-functionalized amphoteric poly(amidoamine).

An amphoteric thiol-functionalized poly(amidoamine) nicknamed ISA23SH(10%) was synthesized. Rhenium complexes 1 and 2, containing 0.5 and 0.8 equiv of rhenium, respectively, were easily obtained by reacting ISA23SH(10%) with [Re(CO)(3)(H(2)O)(3)](CF(3)SO(3)) in aqueous solution at pH 5.5. Both ISA23SH(10%), and its rhenium complexes were soluble in water under physiological conditions. The resultant solutions were stable, even in the presence of cysteine. Rhenium chelation occurred through the S and N atoms of the cysteamine moiety, as demonstrated by (1)H, (13)C, and (15)N NMR spectroscopy. The diffusion coefficients and the hydrodynamic radii of ISA23SH(10%) and complex 1 were determined by pulsed gradient spin echo (PGSE) NMR experiments. The radius of the rhenium complexes 1 and 2 was always slightly larger than that of the parent polymer. TEM analysis showed that both complexes form spherical nanoparticles with narrow size distributions. Consistent results were obtained by dynamic light scattering. The observed sizes were in good agreement with those evaluated by PGSE. Preliminary in vitro and in vivo biological studies have been performed on complexes 1 and 2 as well as on the parent ISA23SH(10%). Neither hemolytic activity of the two rhenium complexes and the parent polymer, up to a concentration of 5 mg/mL, nor cytotoxic effects were observed on Hela cell after 48 h at a concentration of 100 ng/mL. In vivo toxicological tests showed that ISA23SH(10%) is highly biocompatible, with a maximum tolerated dose (MTD) of 500 mg/kg. No toxic side effects were apparent after the intravenous injection in mice of the two rhenium complexes in doses up to 20 mg/kg.

NMR spectroscopy and MALDI-TOF MS characterisation of end-functionalised PVP oligomers prepared with different esters as chain transfer agents.

Ester-functionalised poly(1-vinylpyrrolidin-2-one) (PVP) oligomers obtained by radical polymerisation in methyl propionate, diethyl malonate and diethyl 2-methylmalonate were characterised by NMR spectroscopy, and MALDI-TOF mass spectrometry. The chain-transfer constants were determined as 5.54 x 10(-4), 1.22 x 10(-3) and 1.70 x 10(-2), respectively, by measuring the variation of the number-average molecular weight on conversion. These values were compared with those of methyl isobutyrate (1.65 x 10(-3)) and ethyl lactate (1.03 x 10(-2)), which had been previously determined. A clear dependence was found on the reactivity of the mobile hydrogen atoms alpha with the ester group. All of the macromolecules carried a single ester function. Therefore, the re-initiation step by the CTA-derived radicals overwhelmingly prevailed over initiation by the primary radicals.

Poly-l-Lactic Acid Nanofiber-Polyamidoamine Hydrogel Composites: Preparation, Properties, and Preliminary Evaluation as Scaffolds for Human Pluripotent Stem Cell Culturing.

Electrospun poly-l-lactic acid (PLLA) nanofiber mats carrying surface amine groups, previously introduced by nitrogen atmospheric pressure nonequilibrium plasma, are embedded into aqueous solutions of oligomeric acrylamide-end capped AGMA1, a biocompatible polyamidoamine with arg-gly-asp (RGD)-reminiscent repeating units. The resultant mixture is finally cured giving PLLA-AGMA1 hydrogel composites that absorb large amounts of water and, in the swollen state, are translucent, soft, and pliable, yet as strong as the parent PLLA mat. They do not split apart from each other when swollen in water and remain highly flexible and resistant, since the hydrogel portion is covalently grafted onto the PLLA nanofibers via the addition reaction of the surface amine groups to a part of the terminal acrylic double bonds of AGMA1 oligomers. Preliminary tested as scaffolds, the composites prove capable of maintaining short-term undifferentiated cultures of human pluripotent stem cells in feeder-free conditions.

Linear biocompatible glyco-polyamidoamines as dual action mode virus infection inhibitors with potential as broad-spectrum microbicides for sexually transmitted diseases.

The initial steps of viral infections are mediated by interactions between viral proteins and cellular receptors. Blocking the latter with high-affinity ligands may inhibit infection. DC-SIGN, a C-type lectin receptor expressed by immature dendritic cells and macrophages, mediates human immunodeficiency virus (HIV) infection by recognizing mannose clusters on the HIV-1 gp120 envelope glycoprotein. Mannosylated glycodendrimers act as HIV entry inhibitors thanks to their ability to block this receptor. Previously, an amphoteric, but prevailingly cationic polyamidoamine named AGMA1 proved effective as infection inhibitor for several heparan sulfate proteoglycan-dependent viruses, such as human papilloma virus HPV-16 and herpes simplex virus HSV-2. An amphoteric, but prevailingly anionic PAA named ISA23 proved inactive. It was speculated that the substitution of mannosylated units for a limited percentage of AGMA1 repeating units, while imparting anti-HIV activity, would preserve the fundamentals of its HPV-16 and HSV-2 infection inhibitory activity. In this work, four biocompatible linear PAAs carrying different amounts of mannosyl-triazolyl pendants, Man-ISA7, Man-ISA14, Man-AGMA6.5 and Man-AGMA14.5, were prepared by reaction of 2-(azidoethyl)-α-D-mannopyranoside and differently propargyl-substituted AGMA1 and ISA23. All mannosylated PAAs inhibited HIV infection. Both Man-AGMA6.5 and Man-AGMA14.5 maintained the HPV-16 and HSV-2 activity of the parent polymer, proving broad-spectrum, dual action mode virus infection inhibitors.

Novel poly(amido-amine)-based hydrogels as scaffolds for tissue engineering.

Biodegradable and biocompatible amphoteric poly(amido-amine) (PAA)-based hydrogels, containing carboxyl groups along with amino groups in their repeating unit, were considered as scaffolds for tissue engineering applications. These hydrogels were obtained by co-polymerising 2,2-bisacrylamidoacetic acid with 2-methylpiperazine with or without the addition of different mono-acrylamides as modifiers, and in the presence of primary bis-amines as crosslinking agents. Hybrid PAA/albumin hydrogels were also prepared. The polymerisation reaction was a Michael-type polyaddition carried out in aqueous media. The PAA hydrogels were soft and swellable materials. Cytotoxicity tests were carried out by the direct contact method with fibroblast cell lines on the hydrogels both in their native state (that is, as free bases) and as salts with acids of different strength, namely hydrochloric, sulfuric, acetic and lactic acid. This was done in order to ascertain whether counterion-specific differences in cytotoxicity existed. It was found that all the amphoteric PAA hydrogels considered were cytobiocompatible both as free bases and salts. Selected hydrogels samples underwent degradation tests under controlled conditions simulating biological environments, i.e. Dulbecco medium at pH 7.4 and 37 degrees C. All samples degraded completely and dissolved within 10 d, with the exception of hybrid PAA/albumin hydrogels that did not dissolve even after eight months. The degradation products of all samples turned to be non-cytotoxic. All these results led us to conclude that PAA-based hydrogels have a definite potential as degradable matrices for biomedical applications.

PHEMA hydrogels obtained by a novel low-heat curing procedure with a potential for in situ preparation.

In this work, we report on poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels obtained by a low heat curing reaction. These materials are suitable for in situ preparation and therefore endowed with a potential for several biomedical applications. The novel procedure adopted involves as the first step the synthesis of a soluble oligomeric PHEMA precursor containing polymerizable functions as side substituents. As the second step, the precursor is dissolved in equal amounts of 2-hydroxyethyl methacrylate (HEMA) and water, to form a viscous but still injectable syrup. A low temperature water soluble initiator is then added. The curing reaction starts promptly and is completed within few minutes. During the entire process the internal temperature never rises above 40 degrees C. Preliminary mechanical characterizations performed on the hydrogels in their water-swollen state and diffusion tests in absorption/desorption experiments clearly indicated that on all respects the novel hydrogels are comparable with conventional PHEMA hydrogels obtained according to literature from HEMA in the presence of divinyl crosslinkers. However, the much shorter curing time combined with the far lower curing temperature endow the new hydrogels with a higher potential in view of specific surgical requirements, and particularly for in situ preparation.

End-functionalised 1-vinyl-2-pyrrolidinone oligomers bearing lactate functions at one end.

1-Vinyl-2-pyrrolidinone (VP) oligomers bearing a lactate group at one end (PVP-L) were obtained by chain-transfer controlled radical polymerisation carried out in the presence of ethyl L-lactate as chain-transfer agent (CTA). Their number-average molecular weights were in the range 1500-4000 with molecular weight distributions ranging from 1.4 to 1.8. The chain transfer constant, C(T), of the ethyl L-lactate/VP system was determined by monitoring the variation of PVP-L number-average molecular weight on conversion. The C(T) value so obtained was 1.03 x 10(-2), which is by about one order of magnitude higher than the C(T) value previously determined for a seemingly similar system, namely methyl isobutyrate/1-vinyl-2-pyrrolidinone (1.64 x 10(-3)). The resultant PVP-L oligomers were thoroughly characterised by means of (1)H and (13)C NMR, in order to ascertain the regular presence of the lactate functions at one of their chain terminals. NMR characterisations gave results in full agreement with the proposed structure. Moreover, the molecular weight values determined by NMR very closely agreed with those obtained by SEC. Preliminary biological evaluations of the PVP-L oligomers showed a complete lack of toxicity.

Degradable poly(amidoamine) hydrogels as scaffolds for in vitro culturing of peripheral nervous system cells.

This paper reports on the synthesis and physico-chemical, mechanical, and biological characterization of two sets of poly(amidoamine) (PAA) hydrogels with potential as scaffolds for in vivo peripheral nerve regeneration. They are obtained by polyaddition of piperazine with N,N'-methylenebis(acrylamide) or 1,4-bis(acryloyl)piperazine with 1,2-diaminoethane as cross-linking agent and exhibit a combination of relevant properties, such as mechanical strength, biocompatibility, biodegradability, ability to induce adhesion and proliferation of Schwann cells (SCs) preserving their viability. Moreover, the most promising hydrogels, that is those deriving from 1,4-bis(acryloyl)piperazine, allow the in vitro growth of the sensitive neurons of the dorsal root ganglia, thus getting around a critical point in the design of conduits for nerve regeneration.

Enhanced antiviral activity of acyclovir loaded into nanoparticles.

The activity of antivirals can be enhanced by their incorporation in nanoparticulate delivery systems. Peculiar polymeric nanoparticles, based on a ß-cyclodextrin-poly(4-acryloylmorpholine) monoconjugate (ß-CD-PACM), are proposed as acyclovir carriers. The experimental procedure necessary to obtain the acyclovir-loaded nanoparticles using the solvent displacement preparation method will be described in this chapter. Fluorescent labeled nanoparticles are prepared using the same method for cellular trafficking studies. The biocompatibility assays necessary to obtain safe nanoparticles are reported. Section 4 of this chapter describes the assessment of the antiviral activity of the acyclovir-loaded nanoparticles.

Biological performance of a novel biodegradable polyamidoamine hydrogel as guide for peripheral nerve regeneration.

Polyamidoamines (PAAs) are a well-known family of synthetic biocompatible and biodegradable polymers, which can be prepared as soft hydrogels characterized by low interfacial tension and tunable elasticity. For the first time we report here on the in vivo performance of a PAA hydrogel implant as scaffold for tissue engineering. In particular, an amphoteric agmatine-deriving PAA hydrogel shaped as small tubing was obtained by radical polymerization of a soluble functional oligomeric precursor and used as conduit for nerve regeneration in a rat sciatic nerve cut model. The animals were analyzed at 30, 90, and 180 days post-surgery. PAA tubing proved to facilitate nerve regeneration. Good surgical outcomes were achieved with no signs of inflammation or neuroma. Moreover, nerve regeneration was morphologically sound and the quality of functional recovery satisfactory. In conclusion, PAA hydrogel scaffolds may represent a novel and promising material for peripheral nerve regeneration.

Direct microfabrication of topographical and chemical cues for the guided growth of neural cell networks on polyamidoamine hydrogels.

Cell patterning is an important tool for organizing cells in surfaces and to reproduce in a simple way the tissue hierarchy and complexity of pluri-cellular life. The control of cell growth, proliferation and differentiation on solid surfaces is consequently important for prosthetics, biosensors, cell-based arrays, stem cell therapy and cell-based drug discovery concepts. We present a new electron beam lithography method for the direct and simultaneous fabrication of sub-micron topographical and chemical patterns, on a biocompatible and biodegradable PAA hydrogel. The localized e-beam modification of a hydrogel surface makes the pattern able to adsorb proteins in contrast with the anti-fouling surface. By also exploiting the selective attachment, growth and differentiation of PC12 cells, we fabricated a neural network of single cells connected by neuritis extending along microchannels. E-beam microlithography on PAA hydrogels opens up the opportunity of producing multifunctional microdevices incorporating complex topographies, allowing precise control of the growth and organization of individual cells.

Enhanced antiviral activity of Acyclovir loaded into beta-cyclodextrin-poly(4-acryloylmorpholine) conjugate nanoparticles.

Novel polymeric nanoparticles based on a beta-cyclodextrin-poly(4-acryloylmorpholine) mono-conjugate (beta-CD-PACM), a tadpole-shaped polymer in which the beta-CD ring is the hydrophilic head and the PACM chain the amphiphilic tail, were prepared by the solvent injection technique. Acyclovir-loaded nanoparticles were prepared from inclusion complexes of Acyclovir with beta-CD-PACM. Both unloaded and drug-loaded nanoparticles were characterized in terms of particle size distribution, morphology, zeta potential, drug loading and in vitro drug release rate. The antiviral activity of Acyclovir loaded into beta-CD-PACM nanoparticles against two clinical isolates of HSV-1 was evaluated and found to be remarkably superior compared with that of both the free drug and a soluble beta-CD-PACM complex reported in a previous paper. Fluorescent nanoparticles loaded with coumarin 6 were also prepared in order to investigate the nanoparticle cell uptake by confocal laser microscopy. It was found that the nanoparticles are internalized in cells and locate in the perinuclear compartment.

Quantitative investigation by atomic force microscopy of supported phospholipid layers and nanostructures on cholesterol-functionalized glass surfaces.

Understanding the interaction mechanisms of phospholipids with surfaces is crucial for the exploitation of lipid bilayers as models of the cell membrane as well as templates for biosensors. Moreover, controlling and manipulating lipid nanoparticles for the investigation of their properties by means of single-particle sensitive surface techniques require the ability to tailor the chemical properties of surfaces to achieve a stable and sparse binding of lipid particles, while keeping them from aggregating, or denaturing. Here we present a quantitative morphological and structural investigation by atomic force microscopy of supported phospholipid layers and nanostructures on cholesterol-functionalized glass surfaces, in comparison with other surfaces with different interfacial properties. We show that the functionalization of glass coverslips with cholesterol groups is a viable route for the production of optically transparent, scanning probe microscopy-compatible clean substrates for the effective immobilization of both extended single lipid bilayers and lipid nanoparticles.

Biodegradable polymers from renewable sources: rheological characterization of hemicellulose-based hydrogels.

Hemicellulose-based hydrogels were prepared by radical polymerization of 2-hydroxyethyl methacrylate or poly(ethylene glycol) dimethacrylate with oligomeric hydrosoluble hemicellulose modified with well-defined amounts of methacrylic functions. The polymerization reaction was carried out in water at 40 degrees C using a redox initiator system. The hydrogels were in general elastic, soft, and easily swellable in water. Their viscoelastic properties were determined by oscillatory shear measurements on 2 mm thick hydrogels under a slight compression to avoid slip, over the frequency range 10(-1) to 10(2). The rheological characterization indicated that the elastic response of the hydrogels was stronger than the viscous response, leading to the conclusion that the hydrogel systems displayed a predominantly solid-like behavior. The curves showed an increase in shear storage modulus with increasing cross-linking density. The nature of the synthetic comonomer in the hemicellulose-based hydrogels also influenced the shear storage modulus. Comparison of hemicellulose-based hydrogels with pure poly(2-hydroxyethyl methacrylate) hydrogels showed that their behaviors were rather similar, demonstrating that the synthetic procedure made it possible to prepare hemicellulose-based hydrogels with properties similar to those of pure poly(2-hydroxyethyl methacrylate) hydrogels.

Novel agmatine-containing poly(amidoamine) hydrogels as scaffolds for tissue engineering.

Novel biocompatible and biodegradable amphoteric poly(amidoamine) (PAA) hydrogels were designed for applications as scaffolds for tissue engineering. These hydrogels (PAA-AG1 and PAA-AG2) were obtained by polyaddition of 2,2-bisacrylamidoacetic acid with 2-methylpiperazine and 4-aminobutyl guanidine, a bioactive molecule with a known ability to induce adhesion to cell membranes. They contain carboxylic functions in their main chain and interchain connections deriving from two different cross-linking agents: for PAA-AG1, a multifunctional primary amine, that is, 1,10-decanediamine; for PAA-AG2, a purposely synthesized PAA (PAA-NH(2)) containing pendant NH(2). Both PAA-AG1 and PAA-AG2 proved noncytotoxic and adhesive to cell membranes, as ascertained by means of cytotoxicity and proliferation tests carried out on fibroblast cell lines. Good apparent mechanical strength was also observed in the case of PAA-AG2, cross-linked with the PAA-NH(2). Both PAA-AG1 and PAA-AG2 underwent degradation tests under controlled conditions simulating the biological environments, that is, Dulbecco medium at pH 7.4 and 37 degrees C. They completely dissolved within 10 and about 40 days, respectively. In both cases, the degradation products were completely noncytotoxic. All the results of this paper point to the conclusion that agmatine-based PAA hydrogels are excellent substrates for cell proliferation.

Polycaprolactone-poly(ethylene glycol) multiblock copolymers as potential substitutes for di(ethylhexyl) phthalate in flexible poly(vinyl chloride) formulations.

New high-molecular-weight hydrophobic/hydrophilic segmented copolymers of poly(ester ether carbonate) structure, containing poly(epsilon-caprolactone) (PCL) and poly(ethylene glycol) (PEG) segments in their main chain, were synthesized and characterized. These copolymers were obtained by a two-step chain-extension reaction carried out in the presence of alpha,omega-dihydroxy-oligoPCL of molecular weight 1250 and PEG samples of molecular weight 150, 400, 600, 1000, and 2000. The molecular structures of all synthesized materials were characterized by means of (1)H NMR and (13)C NMR spectroscopy, their molecular weights were determined by means of size exclusion chromatography, and their thermal properties were obtained by means of differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The poly(ester ether carbonate)s of this study are partly or totally miscible at least up to 50 wt % with poly(vinyl chloride) (PVC) and could be used to produce flexible PVC formulations. The miscibility between PVC and the poly(ester ether carbonate)s reported in this paper was investigated by means of DSC and DMA analysis. PVC blends were also analyzed by determining their swellability and the amount of extractables in aqueous media. By comparison purposes, the chain-extension product of PCL1250, that is, PCL polycarbonate, was also synthesized and characterized. The results obtained demonstrated that the copolymers with shortest PEG segment length, i.e. PEG150, 400, and 600, give the best results in terms of miscibility with PVC and lead to blends with maximum resistance to extraction by water. Therefore, they represent, in principle, good substitutes for low-molecular-weight, leachable PVC plasticizers, such as di(ethylhexyl) phthalate.