Design of the elusive proteinaceous oxygen donor copper site suggests a promising future for copper for MRI contrast agents.

We report the preparation and spectroscopic characterization of a highly elusive copper site bound exclusively to oxygen donor atoms within a protein scaffold. Despite copper generally being considered unsuitable for use in MRI contrast agents, which in the clinic are largely Gd(III) based, the designed copper coiled coil displays relaxivity values equal to, or superior than, those of the Gd(III) analog at clinical field strengths. The creation of this new-to-biology proteinaceous CuOx-binding site demonstrates the power of the de novo peptide design approach to access chemistry for abiological applications, such as for the development of MRI contrast agents.

Phase Saturation Control on Mixing-Driven Reactions in 3D Porous Media.

Transported chemical reactions in unsaturated porous media are relevant to environmental and industrial applications. Continuum scale models are based on equivalent parameters derived from analogy with saturated conditions and cannot appropriately account for incomplete mixing. It is also unclear how the third dimension controls mixing and reactions. We obtain three-dimensional (3D) images by magnetic resonance imaging using an immiscible nonwetting liquid as a second phase and a fast irreversible bimolecular reaction. We study the impact of phase saturation on the dynamics of mixing and the reaction front. We quantify the temporally resolved effective reaction rate and describe it using the lamellar theory of mixing, which explains faster than Fickian (t0.5) rate of product formation by accounting for the deformation of the mixing interface between the two reacting fluids. For a given Péclet, although stretching and folding of the reactive front enhance as saturation decreases, enhancing the product formation, the product formation is larger as saturation increases. After breakthrough, the extinction of the reaction takes longer as saturation decreases because of the larger nonmixed volume behind the front. These results are the basis for a general model to better predict reactive transport in unsaturated porous media not achievable by the current continuum paradigm.

Probing the influence of Zn and water on solvation and dynamics in ethaline and reline deep eutectic solvents by 1H nuclear magnetic resonance.

A range of ethaline and reline deep eutectic solvents (DESs) have been investigated in the absence and presence of Zn (0-0.3 M) and water (0-29 wt%) by one-dimensional 1H NMR spectroscopy, two-dimensional 1H-1H nuclear Overhauser effect and exchange spectroscopy, 1H T1 NMR relaxation times and 1H NMR diffusion. The role of zinc and water in controlling solvation and microstructure in reline and ethaline were investigated. We show that in ethaline there is proton exchange between hydroxyl groups in ethaline glycol and choline chloride. The rate of exchange between these protons is found to significantly increase in the presence of Zn, but decreases with increasing water content. In the case of reline, no proton exchange is observed between the amide protons in urea and hydroxyl protons in choline chloride. However, the addition of water decreases the viscosity of the system, as well as changes the distance between amide and hydroxyl protons in urea and choline chloride, respectively. The addition of Zn does not appear to change the interactions between urea and choline chloride species, but does reduce the rate of exchange between water and hydroxyl protons in reline formulations containing water.

Effects of Hydration on the Conformational Behavior of Flexible Molecules with Two Charge Centers.

The hydration behavior of alkyl-diammonium di-cations and alkyl-dicarboxylate di-anions, of varying alkyl chain length, was examined using basin-hopping (BH) global optimization techniques. For every di-ion investigated, a conformational transition from linear to folded is observed at a critical hydration number, n*, specific to each di-ion. A stepwise hydration study has been undertaken for alkyl-dicarboxylate di-anions in finite water clusters containing 1-12 water molecules, and low-energy structures have been examined for larger water clusters. An even number of carbons in the alkyl chain gives rise to more stable conformations in unhydrated, implicitly solvated, and explicitly solvated conditions. This work provides valuable information on how the hydration of ammonium and carboxylate ions influence larger biomolecules' conformations.

The aggregation of an alkyl-C60 derivative as a function of concentration, temperature and solvent type.

Contrast-variation small-angle neutron scattering (CV-SANS), small-angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR) measurements of diffusion and isothermal titration calorimetry (ITC) are used to gain insight into the aggregation of an alkyl-C60 derivative, molecule 1, in n-hexane, n-decane and toluene as a function of concentration and temperature. Results point to an associative mechanism of aggregation similar to other commonly associating molecules, including non-ionic surfactants or asphaltenes in non-aqueous solvents. Little aggregation is detected in toluene, but small micelle-like structures form in n-alkane solvents, which have a C60-rich core and alkyl-rich shell. The greatest aggregation extent is found in n-hexane, and at 0.1 M the micelles of 1 comprise around 6 molecules at 25 °C. These micelles become smaller when the concentration is lowered, or if the solvent is changed to n-decane. The solution structure is also affected by temperature, with a slightly larger aggregation extent at 10 °C than at 25 °C. At higher concentrations, for example in solutions of 1 above 0.3 M in n-decane, a bicontinuous network becomes apparent. Overall, these findings aid our understanding of the factors driving the assembly of alkyl-π-conjugated hydrophobic amphiphiles such as 1 in solution and thereby represent a step towards the ultimate goal of exploiting this phenomenon to form materials with well-defined order.

NMR study of the influence of n-alkanol co-surfactants on reverse micelles in quaternary microemulsions of cetyltrimethylammonium bromide (CTAB).

The effects of different n-alkanol co-surfactants on the size, shape, composition and dynamics of reverse micelles (RMs) in cetyltrimethylammonium bromide (CTAB)/n-alkanol/n-hexane/water and CTAB/n-alkanol/n-pentane/water microemulsions were investigated using T2 relaxation and pulsed gradient stimulated echo nuclear magnetic resonance (NMR) measurements and molecular modelling. NMR T2 relaxation times and diffusion coefficients were determined for the surfactant and co-surfactant in these CTAB quaternary reverse microemulsions, for a range of medium chain length alcohol co-surfactants, from 1-butanol to 1-heptanol. These data revealed a slight RM size dependency on co-surfactant chain length, with RM sizes tending to decrease with increasing alcohol chain length. Molecular modelling of CTAB/n-alkanol/n-hexane/water RMs suggested a variation in RM shape with co-surfactant chain length, where those formed with pentanol were found to be least spherical and those formed with heptanol the most spherical. The NMR data also revealed differences in the behaviour of the micellar structures in the CTAB/n-pentanol/n-hexane/water reverse microemulsion, compared with the other reverse microemulsions in this study, where CTAB was found to be distributed between two environments, which then combined to form larger micelles. The origins of these differences remain unclear. Copyright © 2016 John Wiley & Sons, Ltd.

Quantitative, In†Situ Visualization of Metal-Ion Dissolution and Transport Using (1) H Magnetic Resonance Imaging.

Quantitative mapping of metal ions freely diffusing in solution is important across a diverse range of disciplines and is particularly significant for dissolution processes in batteries, metal corrosion, and electroplating/polishing of manufactured components. However, most current techniques are invasive, requiring sample extraction, insertion of an electrode, application of an electric potential or the inclusion of a molecular sensor. Thus, there is a need for techniques to visualize the distribution of metal ions non-invasively, in situ, quantitatively, in three dimensions (3D) and in real time. Here we have used (1) H magnetic resonance imaging (MRI) to make quantitative 3D maps showing evolution of the distribution of Cu(2+) ions, not directly visible by MRI, during the electrodissolution of copper, with high sensitivity and spatial resolution. The images are sensitive to the speciation of copper, the depletion of dissolved O2 in the electrolyte and show the dissolution of Cu(2+) ions is not uniform across the anode.

De novo design of Ln(III) coiled coils for imaging applications.

A new peptide sequence (MB1) has been designed which, in the presence of a trivalent lanthanide ion, has been programmed to self-assemble to form a three stranded metallo-coiled coil, Ln(III)(MB1)3. The binding site has been incorporated into the hydrophobic core using natural amino acids, restricting water access to the lanthanide. The resulting terbium coiled coil displays luminescent properties consistent with a lack of first coordination sphere water molecules. Despite this the gadolinium coiled coil, the first to be reported, displays promising magnetic resonance contrast capabilities.

Magnetic resonance imaging of electrochemical cells containing bulk metal.

The development of improved energy-storage devices, as well as corrosion prevention and metal-electrofinishing technologies, requires knowledge of local composition and transport behaviour in electrolytes near bulk metals, in situ and in real time. It remains a challenge to acquire such data and new analytical methods are required. Recent work shows that magnetic resonance imaging (MRI) is able to map concentration gradients and visualise electrochemical processes in electrochemical cells containing bulk metals. This recent work, along with the challenges, and solutions, associated with MRI of these electrochemical cells are reviewed.

Chemical patterns in translating vortices: inter- and intra-cellular mixing effects.

Stationary chemical patterns-flow distributed oscillations (FDOs)-are obtained when the Belousov-Zhabotinsky reaction is coupled with translating vortex flow in a Vortex Flow Reactor. For certain conditions, the FDOs are unstable with the observation of disappearing bands or complex patterns. The transitions between modes of pattern formation are reproduced in a modified Oregonator model consisting of two-zone cells connected in series. We show that increasing inter-cellular mixing of the outer zones results in a transition from FDO to absolute instabilities (AI) and increasing intra-cellular mixing between the core and outer zones can drive the reverse transition between modes (AI to FDO).

Sizing of reverse micelles in microemulsions using NMR measurements of diffusion.

This paper reports the size of reverse micelles (RMs) in AOT/octane/H(2)O and CTAB/hexanol/H(2)O microemulsions using magnetic resonance (MR) pulsed field gradient (PFG) measurements of diffusion. Diffusion data were measured using the pulsed gradient stimulated echo (PGSTE) experiment for surfactant molecules residing in the RM interface. Inverse Laplace transformation of these data generated diffusion coefficients for the RMs, which were converted into hydrodynamic radii using the Stokes-Einstein relation. This technique is complementary to those previously used to size RMs, such as dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS), but also offers several advantages, which are discussed. RM sizes, determined using the PGSTE method, in the AOT (sodium bis(2-ethylhexyl) sulfosuccinate) and CTAB (cetyltrimethylammonium bromide) microemulsions were compared with previous DLS and SAXS data, showing good agreement. Methods for determining number distributions from the PGSTE data, through the use of scaling factors, were investigated.

Design and Simulation of the Biomechanics of Multi-Layered Composite Poly(Vinyl Alcohol) Coronary Artery Grafts.

Coronary artery disease is among the primary causes of death worldwide. While synthetic grafts allow replacement of diseased tissue, mismatched mechanical properties between graft and native tissue remains a major cause of graft failure. Multi-layered grafts could overcome these mechanical incompatibilities by mimicking the structural heterogeneity of the artery wall. However, the layer-specific biomechanics of synthetic grafts under physiological conditions and their impact on endothelial function is often overlooked and/or poorly understood. In this study, the transmural biomechanics of four synthetic graft designs were simulated under physiological pressure, relative to the coronary artery wall, using finite element analysis. Using poly(vinyl alcohol) (PVA)/gelatin cryogel as the representative biomaterial, the following conclusions are drawn: (I) the maximum circumferential stress occurs at the luminal surface of both the grafts and the artery; (II) circumferential stress varies discontinuously across the media and adventitia, and is influenced by the stiffness of the adventitia; (III) unlike native tissue, PVA/gelatin does not exhibit strain stiffening below diastolic pressure; and (IV) for both PVA/gelatin and native tissue, the magnitude of stress and strain distribution is heavily dependent on the constitutive models used to model material hyperelasticity. While these results build on the current literature surrounding PVA-based arterial grafts, the proposed method has exciting potential toward the wider design of multi-layer scaffolds. Such finite element analyses could help guide the future validation of multi-layered grafts for the treatment of coronary artery disease.

Low frequency temperature forcing of chemical oscillations.

The low frequency forcing of chemical oscillations by temperature is investigated experimentally in the Belousov-Zhabotinsky (BZ) reaction and in simulations of the Oregonator model with Arrhenius temperature dependence of the rate constants. Forcing with temperature leads to modulation of the chemical frequency. The number of response cycles per forcing cycle is given by the ratio of the natural frequency to the forcing frequency and phase locking is only observed in simulations when this ratio is a whole number and the forcing amplitude is small. The global temperature forcing of flow-distributed oscillations in a tubular reactor is also investigated and synchronisation is observed in the variation of band position with the external signal, reflecting the periodic modulation of chemical oscillations by temperature.

Magnetic resonance imaging of chemistry.

Magnetic resonance imaging (MRI) has long been recognized as one of the most important tools in medical diagnosis and research. However, MRI is also well placed to image chemical reactions and processes, determine the concentration of chemical species, and look at how chemistry couples with environmental factors, such as flow and heterogeneous media. This tutorial review will explain how magnetic resonance imaging works, reviewing its application in chemistry and its ability to directly visualise chemical processes. It will give information on what resolution and contrast are possible, and what chemical and physical parameters can be measured. It will provide examples of the use of MRI to study chemical systems, its application in chemical engineering and the identification of contrast agents for non-clinical applications. A number of studies are presented including investigation of chemical conversion and selectivity in fixed-bed reactors, temperature probes for catalyst pellets, ion mobility during tablet dissolution, solvent dynamics and ion transport in Nafion polymers and the formation of chemical waves and patterns.

Phase separation and collapse in almost density matched depletion induced colloidal gels in presence and absence of air bubbles: An MRI imaging study.

HYPOTHESIS: Vesicle-polymer dispersions are found in drug-delivery systems and consumer products but undergo phase separation. Previous studies of phase separation have focussed on systems with high density differences between continuous and vesicular phases. In this study, we investigate phase separation in vesicle-polymer mixtures with very small density differences, in the presence and absence of air bubbles. EXPERIMENTS: Magnetic resonance (MR) imaging, X-ray Computed Tomography and rheological measurements are reported which characterise the properties and stability of vesicle suspensions composed of the cationic surfactant, diethylesterdimethyl ammonium chloride, mixed with non-adsorbing polymer. 1H T2 MR relaxation images are employed to observe phase separation, for a range of vesicle-polymer mixtures, which are analysed using Moran's I spatial autocorrelation to quantify the extent and rate of phase separation. FINDINGS: It was found that in presence of air bubbles, phase separation follows a compression/collapse mechanism, typical of colloidal gels with large density differences between the phases. Without air bubbles, phase separation develops through the formation of tiny cracks and fractures in the samples. MRI enabled visualisation of the evolution of phase separation inside highly turbid samples. The rate of phase separation was found to generally increase with increasing polymer concentration and decrease with increasing vesicle volume fraction.

Characterization of Open-Cell Sponges via Magnetic Resonance and X-ray Tomography.

The applications of polymeric sponges are varied, ranging from cleaning and filtration to medical applications. The specific properties of polymeric foams, such as pore size and connectivity, are dependent on their constituent materials and production methods. Nuclear magnetic resonance imaging (MRI) and X-ray micro-computed tomography (µCT) offer complementary information about the structure and properties of porous media. In this study, we employed MRI, in combination with µCT, to characterize the structure of polymeric open-cell foam, and to determine how it changes upon compression, µCT was used to identify the morphology of the pores within sponge plugs, extracted from polyurethane open-cell sponges. MRI T2 relaxation maps and bulk T2 relaxation times measurements were performed for 7° dH water contained within the same polyurethane foams used for µCT. Magnetic resonance and µCT measurements were conducted on both uncompressed and 60% compressed sponge plugs. Compression was achieved using a graduated sample holder with plunger. A relationship between the average T2 relaxation time and maximum opening was observed, where smaller maximum openings were found to have a shorter T2 relaxation times. It was also found that upon compression, the average maximum opening of pores decreased. Average pore size ranges of 375-632 ± 1 µm, for uncompressed plugs, and 301-473 ± 1 µm, for compressed plugs, were observed. By determining maximum opening values and T2 relaxation times, it was observed that the pore structure varies between sponges within the same production batch, as well as even with a single sponge.

Tuning coordination chemistry through the second sphere in designed metallocoiled coils.

The metal hydration state within a designed coiled coil can be progressively tuned across the full integer range (3 → 0 aqua ligands), by careful choice of a second sphere terminal residue, including the lesser used Trp. Potential implications include a four-fold change in MRI relaxivity when applied to lanthanide coiled coils.

Operando visualisation of battery chemistry in a sodium-ion battery by 23Na magnetic resonance imaging.

Sodium-ion batteries are a promising battery technology for their cost and sustainability. This has led to increasing interest in the development of new sodium-ion batteries and new analytical methods to non-invasively, directly visualise battery chemistry. Here we report operando 1H and 23Na nuclear magnetic resonance spectroscopy and imaging experiments to observe the speciation and distribution of sodium in the electrode and electrolyte during sodiation and desodiation of hard carbon in a sodium metal cell and a sodium-ion full-cell configuration. The evolution of the hard carbon sodiation and subsequent formation and evolution of sodium dendrites, upon over-sodiation of the hard carbon, are observed and mapped by 23Na nuclear magnetic resonance spectroscopy and imaging, and their three-dimensional microstructure visualised by 1H magnetic resonance imaging. We also observe, for the first time, the formation of metallic sodium species on hard carbon upon first charge (formation) in a full-cell configuration.

Nuclear magnetic resonance and small-angle X-ray scattering studies of mixed sodium dodecyl sulfate and N,N-dimethyldodecylamine N-oxide aqueous systems performed at low temperatures.

Surfactant crystallisation is important in many applications in the food, consumer product and medical sectors. However, these processes are not well understood. In particular, surfactant crystallisation can be detrimental to the stability of detergent formulations, such as dish liquid products, resulting in a turbid solution that fails appearance criteria. With the rising global demand for detergent products, understanding the factors that influence formulation stability is of increasing importance. To enable industry to build more robust formulations, it is important to understand the underlying chemistry of the crystallisation process. Here, a model system containing anionic (sodium dodecyl sulfate, SDS) and amphoteric (N,N-dimethyldodecylamine N-oxide, DDAO) surfactants, at concentrations typical of dish liquid products, is studied. Variable temperature 1H nuclear magnetic resonance (NMR) spectroscopy and small-angle X-ray scattering (SAXS) is used to probe the compositional and structural properties of this system, as a function of pH. On cooling, at pH 9, a mixture of hydrated crystals, predominately composed of SDS, and micelles containing both surfactants, have been observed prior to complete freezing. At pH 2, both surfactants appear to undergo a simultaneous phase transition, resulting in the removal of micelles and the formation of hydrated crystals of mixed composition.

Characterisation of heterogeneity and spatial autocorrelation in phase separating mixtures using Moran's I.

In complex colloidal systems, particle-poor regions can develop within particle-rich phases during sedimentation or creaming. These particle-poor regions are overlooked by 1D profiles, which are typically used to assess particle distributions in a sample. Alternative methods to visualise and quantify these regions are required to better understand phase separation, which is the focus of this paper. Magnetic resonance imaging has been used to monitor the development of compositional heterogeneity in a vesicle-polymer mixture undergoing creaming. T2 relaxation time maps were used to identify the distribution of vesicles, with vesicle-poor regions exhibiting higher T2 relaxation times than regions richer in vesicles. Phase separated structures displayed a range of different morphologies and a variety of image analysis methods, including first-order statistics, Fourier transformation, grey level co-occurrence matrices and Moran's I spatial autocorrelation, were used to characterise these structures, and quantify their heterogeneity. Of the image analysis techniques used, Moran's I was found to be the most effective at quantifying the degree and morphology of phase separation, providing a robust, quantitative measure by which comparisons can be made between a diverse range of systems undergoing phase separation. The sensitivity of Moran's I can be enhanced by the choice of weight matrices used.