Photovoltage field-effect transistors.

The detection of infrared radiation enables night vision, health monitoring, optical communications and three-dimensional object recognition. Silicon is widely used in modern electronics, but its electronic bandgap prevents the detection of light at wavelengths longer than about 1,100 nanometres. It is therefore of interest to extend the performance of silicon photodetectors into the infrared spectrum, beyond the bandgap of silicon. Here we demonstrate a photovoltage field-effect transistor that uses silicon for charge transport, but is also sensitive to infrared light owing to the use of a quantum dot light absorber. The photovoltage generated at the interface between the silicon and the quantum dot, combined with the high transconductance provided by the silicon device, leads to high gain (more than 104 electrons per photon at 1,500 nanometres), fast time response (less than 10 microseconds) and a widely tunable spectral response. Our photovoltage field-effect transistor has a responsivity that is five orders of magnitude higher at a wavelength of 1,500 nanometres than that of previous infrared-sensitized silicon detectors. The sensitization is achieved using a room-temperature solution process and does not rely on traditional high-temperature epitaxial growth of semiconductors (such as is used for germanium and III-V semiconductors). Our results show that colloidal quantum dots can be used as an efficient platform for silicon-based infrared detection, competitive with state-of-the-art epitaxial semiconductors.

Expected and paradoxical effects of obesity on cancer treatment response.

Obesity, whose prevalence is pandemic and continuing to increase, is a major preventable and modifiable risk factor for diabetes and cardiovascular diseases, as well as for cancer. Furthermore, epidemiological studies have shown that obesity is a negative independent prognostic factor for several oncological outcomes, including overall and cancer-specific survival, for several site-specific cancers as well as for all cancers combined. Yet, a recently growing body of evidence suggests that sometimes overweight and obesity may associate with better outcomes, and that immunotherapy may show improved response among obese patients compared with patients with a normal weight. The so-called 'obesity paradox' has been reported in several advanced cancer as well as in other diseases, albeit the mechanisms behind this unexpected relationship are still not clear. Aim of this review is to explore the expected as well as the paradoxical relationship between obesity and cancer prognosis, with a particular emphasis on the effects of cancer therapies in obese people.

Nutritional status and follicular-derived thyroid cancer: An update.

The incidence of differentiated thyroid cancer has been increasing in the last decades all over the world. Such a steady growth cannot be entirely attributable to more intensive thyroid nodule screening and more sensitive diagnostic procedures. Several environmental factors have changed with sufficient rapidity in the same time frame and may represent credible candidates for this increase. They include modified iodine intake, lifestyle-associated risk factors, exposure to various toxic compounds, pollutants and xenobiotics, nutritional deficiencies, eating habits and comorbidities. Foremost, nutritional patterns have gained high interest as possible promoters and modifiable risk factors for thyroid cancer in recent years. The aim of this narrative review is to focus on the relationship between thyroid cancer and nutritional factors, dietary habits and obesity. Low iodine intake has been associated to increased risk of thyroid cancer, favoring the development of more aggressive histotypes. Moreover, correction of iodine deficiency can shift thyroid cancer subtypes toward less aggressive forms, without affecting the overall risk for cancer. Actually, evidence regarding the association between selenium and vitamin D deficiency and thyroid cancer is very limited, despite their well-known anti-cancer potentials, and the clinical usefulness of their supplementation is still uncertain in this setting. Albeit the relationship between single foods and thyroid cancer is difficult to examine, fish and iodine-rich foods, vegetables, and fruits might exert protective effects on thyroid cancer risk. Conversely, no clear association has been found for other foods to date. Lastly, a clear association between obesity and the risk of thyroid cancer, with more aggressive behavior, seems to emerge from most studies, likely involving variations in thyroid function and chronic inflammation mediated by cytokines, insulin, leptin and adiponectins. Although no definite association between dietary factors and thyroid cancer has been firmly established so far, some nutritional patterns, together with excessive weight, seem to play a relevant role in thyroid cancer carcinogenesis as well as in its severity and aggressiveness. These effects may play an additive role to the well-established one exerted by environmental carcinogens, such as pollutants and radiation exposure.

Engineering of CH3 NH3 PbI3 Perovskite Crystals by Alloying Large Organic Cations for Enhanced Thermal Stability and Transport Properties.

The number of studies on organic-inorganic hybrid perovskites has soared in recent years. However, the majority of hybrid perovskites under investigation are based on a limited number of organic cations of suitable sizes, such as methylammonium and formamidinium. These small cations easily fit into the perovskite's three-dimensional (3D) lead halide framework to produce semiconductors with excellent charge transport properties. Until now, larger cations, such as ethylammonium, have been found to form 2D crystals with lead halide. Here we show for the first time that ethylammonium can in fact be incorporated coordinately with methylammonium in the lattice of a 3D perovskite thanks to a balance of opposite lattice distortion strains. This inclusion results in higher crystal symmetry, improved material stability, and markedly enhanced charge carrier lifetime. This crystal engineering strategy of balancing opposite lattice distortion effects vastly increases the number of potential choices of organic cations for 3D perovskites, opening up new degrees of freedom to tailor their optoelectronic and environmental properties.

Air-stable n-type colloidal quantum dot solids.

Colloidal quantum dots (CQDs) offer promise in flexible electronics, light sensing and energy conversion. These applications rely on rectifying junctions that require the creation of high-quality CQD solids that are controllably n-type (electron-rich) or p-type (hole-rich). Unfortunately, n-type semiconductors made using soft matter are notoriously prone to oxidation within minutes of air exposure. Here we report high-performance, air-stable n-type CQD solids. Using density functional theory we identify inorganic passivants that bind strongly to the CQD surface and repel oxidative attack. A materials processing strategy that wards off strong protic attack by polar solvents enabled the synthesis of an air-stable n-type PbS CQD solid. This material was used to build an air-processed inverted quantum junction device, which shows the highest current density from any CQD solar cell and a solar power conversion efficiency as high as 8%. We also feature the n-type CQD solid in the rapid, sensitive, and specific detection of atmospheric NO2. This work paves the way for new families of electronic devices that leverage air-stable quantum-tuned materials.

Metabolic disorders and gastroenteropancreatic-neuroendocrine tumors (GEP-NETs): How do they influence each other? An Italian Association of Medical Oncology (AIOM)/ Italian Association of Medical Diabetologists (AMD)/ Italian Society of Endocrinology (SIE)/ Italian Society of Pharmacology (SIF) multidisciplinary consensus position paper.

Gastroenteropancreatic neuroendocrine tumors (GEP-NETs) are a heterogeneous group of malignancies derived from neuroendocrine cells that can occur anywhere along the gastrointestinal tract. GEP-NETs incidence has been steadily increasing over the past decades, in parallel with the increasing incidence of the metabolic syndrome (MetS). It is not yet fully known whether the MetS components (such as obesity, dyslipidemia and type 2 diabetes) could be involved in the etiology of GEP-NETs or could influence their outcomes. In this review, a panel of experts of the Italian Association of Medical Oncology (AIOM), Italian Association of Medical Diabetologists (AMD), Italian Society of Endocrinology (SIE), and Italian Society of Pharmacology (SIF) provides a critical view of the experimental and clinical evidence about the association of GEP-NETs risk, outcomes, and therapies with the metabolic disorders typical of MetS. The potential therapeutic strategies for an optimal management of patients with both GEP-NETs and MetS are also discussed.

Corticosteroids in oncology: Use, overuse, indications, contraindications. An Italian Association of Medical Oncology (AIOM)/ Italian Association of Medical Diabetologists (AMD)/ Italian Society of Endocrinology (SIE)/ Italian Society of Pharmacology (SIF) multidisciplinary consensus position paper.

Corticosteroids (CSs) are widely used in oncology, presenting several different indications. They are useful for induction of apoptosis in hematological neoplasms, for management of anaphylaxis and cytokine release/hypersensitivity reaction and for the symptomatic treatment of many tumour- and treatment-related complications. If the employment of CSs in the oncological setting results in several benefits for patients and satisfaction for clinicians, on the other hand, many potential adverse events (AEs), both during treatment and after withdrawal of CSs, as well as the duality of the effects of these compounds in oncology, recommend being cautious in clinical practice. To date, several gray zones remain about indications, contraindications, dose, and duration of treatment. In this article, a panel of experts provides a critical review on CSs therapy in oncology, focusing on mechanisms of action and pharmacological characteristics, current and emerging therapeutic indications/contraindications, AEs related to CSs treatment, and the impact on patient outcome.

Composition-Controlled Atomic Layer Deposition of Phase-Change Memories and Ovonic Threshold Switches with High Performance.

Chalcogenide compounds are the main characters in a revolution in electronic memories. These materials are used to produce ultrafast ovonic threshold switches (OTSs) with good selectivity and moderate leakage current and phase-change memories (PCMs) with excellent endurance and short read/write times when compared with state-of-the-art flash-NANDs. The combination of these two electrical elements is used to fabricate nonvolatile memory arrays with a write/access time orders of magnitude shorter than that of state-of-the-art flash-NANDs. These devices have a pivotal role for the advancement of fields such as artificial intelligence, machine learning, and big-data. Chalcogenide films, at the moment, are deposited by using physical vapor deposition (PVD) techniques that allow for fine control over the stoichiometry of solid solutions but fail in providing the conformality required for developing large-memory-capacity integrated 3D structures. Here we present conformal ALD chalcogenide films with control over the composition of germanium, antimony, and tellurium (GST). By developing a technique to grow elemental Te we demonstrate the ability to deposit conformal, smooth, composition-controlled GST films. We present a thorough physical and chemical characterization of the solids and an in-depth electrical test. We demonstrate the ability to produce both OTS and PCM materials. GeTe4 OTSs exhibit fast switching times of ∼13 ns. Ge2Sb2Te5 ALD PCMs exhibit a wide memory window exceeding two orders of magnitude, short write times (∼100 ns), and a reset current density as low as ∼107 A/cm2-performance matching or improving upon state-of-the-art PVD PCM devices.

The Electrical and Optical Properties of Organometal Halide Perovskites Relevant to Optoelectronic Performance.

Organometal halide perovskites are under intense study for use in optoelectronics. Methylammonium and formamidinium lead iodide show impressive performance as photovoltaic materials; a premise that has spurred investigations into light-emitting devices and photodetectors. Herein, the optical and electrical material properties of organometal halide perovskites are reviewed. An overview is given on how the material composition and morphology are tied to these properties, and how these properties ultimately affect device performance. Material attributes and techniques used to estimate them are analyzed for different perovskite materials, with a particular focus on the bandgap, mobility, diffusion length, carrier lifetime, and trap-state density.

Fast and Sensitive Solution-Processed Visible-Blind Perovskite UV Photodetectors.

The first visible-blind UV photodetector based on MAPbCl3 integrated on a substrate exhibits excellent performance, with responsivities reaching 18 A W(-1) below 400 nm and imaging-compatible response times of 1 ms. This is achieved by using substrate-integrated single crystals, thus overcoming the severe limitations affecting thin films and offering a new application of efficient, solution-processed, visible-transparent perovskite optoelectronics.

The In-Gap Electronic State Spectrum of Methylammonium Lead Iodide Single-Crystal Perovskites.

The density of trap states within the bandgap of methylammonium lead iodide single crystals is investigated. Defect states close to both the conduction and valence bands are probed. Additionally, a comprehensive electronic characterization of crystals is carried out, including measurements of the electron and hole mobility, and the energy landscape (band diagram) at the surface.

Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals.

Controllable doping of semiconductors is a fundamental technological requirement for electronic and optoelectronic devices. As intrinsic semiconductors, hybrid perovskites have so far been a phenomenal success in photovoltaics. The inability to dope these materials heterovalently (or aliovalently) has greatly limited their wider utilizations in electronics. Here we show an efficient in situ chemical route that achieves the controlled incorporation of trivalent cations (Bi(3+), Au(3+), or In(3+)) by exploiting the retrograde solubility behavior of perovskites. We term the new method dopant incorporation in the retrograde regime. We achieve Bi(3+) incorporation that leads to bandgap tuning (∼300 meV), 10(4) fold enhancement in electrical conductivity, and a change in the sign of majority charge carriers from positive to negative. This work demonstrates the successful incorporation of dopants into perovskite crystals while preserving the host lattice structure, opening new avenues to tailor the electronic and optoelectronic properties of this rapidly emerging class of solution-processed semiconductors.

Photojunction field-effect transistor based on a colloidal quantum dot absorber channel layer.

The performance of photodetectors is judged via high responsivity, fast speed of response, and low background current. Many previously reported photodetectors based on size-tuned colloidal quantum dots (CQDs) have relied either on photodiodes, which, since they are primary photocarrier devices, lack gain; or photoconductors, which provide gain but at the expense of slow response (due to delayed charge carrier escape from sensitizing centers) and an inherent dark current vs responsivity trade-off. Here we report a photojunction field-effect transistor (photoJFET), which provides gain while breaking prior photoconductors' response/speed/dark current trade-off. This is achieved by ensuring that, in the dark, the channel is fully depleted due to a rectifying junction between a deep-work-function transparent conductive top contact (MoO3) and a moderately n-type CQD film (iodine treated PbS CQDs). We characterize the rectifying behavior of the junction and the linearity of the channel characteristics under illumination, and we observe a 10 µs rise time, a record for a gain-providing, low-dark-current CQD photodetector. We prove, using an analytical model validated using experimental measurements, that for a given response time the device provides a two-orders-of-magnitude improvement in photocurrent-to-dark-current ratio compared to photoconductors. The photoJFET, which relies on a junction gate-effect, enriches the growing family of CQD photosensitive transistors.

The Silicon:Colloidal Quantum Dot Heterojunction.

A heterojunction between crystalline silicon and colloidal quantum dots (CQDs) is realized. A special interface modification is developed to overcome an inherent energetic band mismatch between the two semiconductors, and realize the efficient collection of infrared photocarriers generated in the CQD film. This junction is used to produce a sensitive near infrared photodetector.

Planar-integrated single-crystalline perovskite photodetectors.

Hybrid perovskites are promising semiconductors for optoelectronic applications. However, they suffer from morphological disorder that limits their optoelectronic properties and, ultimately, device performance. Recently, perovskite single crystals have been shown to overcome this problem and exhibit impressive improvements: low trap density, low intrinsic carrier concentration, high mobility, and long diffusion length that outperform perovskite-based thin films. These characteristics make the material ideal for realizing photodetection that is simultaneously fast and sensitive; unfortunately, these macroscopic single crystals cannot be grown on a planar substrate, curtailing their potential for optoelectronic integration. Here we produce large-area planar-integrated films made up of large perovskite single crystals. These crystalline films exhibit mobility and diffusion length comparable with those of single crystals. Using this technique, we produced a high-performance light detector showing high gain (above 10(4) electrons per photon) and high gain-bandwidth product (above 10(8) Hz) relative to other perovskite-based optical sensors.

Solar cells. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals.

The fundamental properties and ultimate performance limits of organolead trihalide MAPbX3 (MA = CH3NH3(+); X = Br(-) or I(-)) perovskites remain obscured by extensive disorder in polycrystalline MAPbX3 films. We report an antisolvent vapor-assisted crystallization approach that enables us to create sizable crack-free MAPbX3 single crystals with volumes exceeding 100 cubic millimeters. These large single crystals enabled a detailed characterization of their optical and charge transport characteristics. We observed exceptionally low trap-state densities on the order of 10(9) to 10(10) per cubic centimeter in MAPbX3 single crystals (comparable to the best photovoltaic-quality silicon) and charge carrier diffusion lengths exceeding 10 micrometers. These results were validated with density functional theory calculations.

Single-step fabrication of quantum funnels via centrifugal colloidal casting of nanoparticle films.

Centrifugal casting of composites and ceramics has been widely employed to improve the mechanical and thermal properties of functional materials. This powerful method has yet to be deployed in the context of nanoparticles--yet size-effect tuning of quantum dots is among their most distinctive and application-relevant features. Here we report the first gradient nanoparticle films to be constructed in a single step. By creating a stable colloid of nanoparticles that are capped with electronic-conduction-compatible ligands we were able to leverage centrifugal casting for thin-films devices. This new method, termed centrifugal colloidal casting, is demonstrated to form films in a bandgap-ordered manner with efficient carrier funnelling towards the lowest energy layer. We constructed the first quantum-gradient photodiode to be formed in a single deposition step and, as a result of the gradient-enhanced electric field, experimentally measured the highest normalized detectivity of any colloidal quantum dot photodetector.

Graded doping for enhanced colloidal quantum dot photovoltaics.

A novel approach to improving all-inorganic colloidal quantum dot (CQD) homojunction solar cells by engineering the doping spatial profile to produce a doping gradient within the n-type absorber is presented. The doping gradient greatly improves carrier collection and enhances the voltages attainable by the device, leading to a 1 power point power conversion efficiency (PCE) improvement over previous inorganic CQD solar cells.

Doping control via molecularly engineered surface ligand coordination.

A means to control the net doping of a CQD solid is identified via the design of the bidentate ligand crosslinking the material. The strategy does not rely on implementing different atmospheres at different steps in device processing, but instead is a robust strategy implemented in a single processing ambient. We achieve an order of magnitude difference in doping that allows us to build a graded photovoltaic device and maintain high current and voltage at maximum power-point conditions.