Impact of temporomandibular disorders on oral health-related quality of life: A systematic review and meta-analysis.

BACKGROUND: The management of temporomandibular disorders (TMDs) requires a comprehensive approach that considers multiple factors, including the impact of oral health-related quality of life (OHRQoL). Through this investigation we aim to assess the impact of OHRQoL played in a TMD-afflicted individual. METHODS: Using keywords relevant to our research, such as "Oral health related quality of life," "Oral hygiene," "Temporomandibular joint" and "Temporomandibular disorders," a comprehensive search across multiple online databases was carried out, yielding a total of 632 studies at the preliminary stage of the review. Modified New Castle Ottawa scale was used to assess the quality of studies included. RESULTS: Eight studies were included in the review, out of which six were eligible for further meta-analysis. The studies included in this review employed various OHRQoL measures, including the Oral Health Impact Profile-14 (OHIP-14), the Short-Form 36 Health Survey (SF-36) and the OHIP- 49. All the studies demonstrated significant effect of TMDs on the OHRQoL of the target population under study. CONCLUSION: The impact of OHRQoL on the management of TMD was deemed to be significant. The comprehensive management of TMD should consider the impact of the condition on the individual's daily life and incorporate interventions that address both the physical and psychological aspects of the condition. By improving OqL, individuals with TMD can experience improved overall well-being and quality of life.

Impact Strength of Various Types of Acrylic Resin: An In Vitro Study.

AIM: The aim of this study is to evaluate and compare the impact strength of conventional acrylic resin, high-impact acrylic resin, high-impact acrylic resin reinforced with silver nanoparticles, and high-impact acrylic resin reinforced with a zirconium oxide powder. MATERIALS AND METHODS: A total of 60 samples were prepared of dimensions 60 mm length × 7 mm width × 4 mm thickness to test impact strength. Machined stainless steel dies of the same dimension were used to form molds for the fabrication of these samples. Of 60 samples, 15 samples were prepared each from conventional acrylic resin (Group A1), high-impact acrylic resin (Group A2), acrylic resin reinforced with silver nanoparticles (Group A3), and acrylic resin reinforced with zirconium oxide powder (Group A4). Izod-Charpy pendulum impact testing machine was used. RESULTS: The impact strength of group A1 was in the range of 2.83-3.30 kJ/m2 (M = 3.12 kJ/m2, SD = 0.16), group A2 was in range of 5.10-5.78 kJ/m2 (M = 5.51 kJ/m2, SD = 0.18), group A3 was in range 3.18-3.56 kJ/m2 (M = 3.37 kJ/m2, SD = 0.11), and group A4 was in range 7.18-7.78 kJ/m2 (M = 7.5 kJ/m2, SD = 0.18). Statistical analysis using one-way ANOVA and t-test revealed significant differences (p < 0.001). CONCLUSION: High-impact acrylic resin reinforced with zirconium oxide powder has the highest impact strength. CLINICAL SIGNIFICANCE: This research sheds light on the usefulness of novel filler materials in clinical prosthodontics.

In Vitro Evaluation of marginal adaptation of polyether ether ketone and zirconia copings.

Background: Polyether ether ketone (PEEK) has emerged as a new thermoplastic material with potential applications as a restorative material. Aim: This study aimed to evaluate the marginal adaptation of PEEK copings compared to zirconia copings using field emission scanning electron microscopy. Materials and Methods: A freshly extracted maxillary central incisor was prepared for a full-coverage restoration following standard principles of tooth preparation. The tooth was sent to a laboratory for fabrication of samples using computer-aided design and manufacturing (CAD/CAM). Twenty samples of polyether ether ketone (PEEK) copings (group A) and 20 of zirconia copings were fabricated (group B). The copings were scanned under a field emission scanning electron microscope and measurements were taken at four distinct points. The marginal adaptation over the buccal, lingual, mesial, and distal margins for both groups was evaluated. One-way analysis of variance (ANOVA) and independent t test were applied. Results: Our findings indicate that PEEK showed better marginal adaptation than zirconia at all measurement points. The mean marginal gap value of the PEEK group was 33.99 ± 8.81 µm and of the zirconia group was 56.21 ± 15.07 µm. On comparing marginal adaptation among the mesial, distal, buccal, and lingual aspects, PEEK showed better adaptation on all four margins, with the best adaptation on the buccal margin that had the lowest mean gap value of 29.27 ± 6.07 µm. The zirconia group adapted best at the distal margin, with a lowest mean gap value of 53.58 ± 15.25 µm (P ≤ 0.05). Conclusion: PEEK copings had better marginal adaptation and fit compared to zirconia copings. It may have applications as a restorative material in fixed prostheses.

Lecithin Capping Ligands Enable Ultrastable Perovskite-Phase CsPbI3 Quantum Dots for Rec. 2020 Bright-Red Light-Emitting Diodes.

Bright-red light-emitting diodes (LEDs) with a narrow emission line width that emit between 620 and 635 nm are needed to meet the latest industry color standard for wide color gamut displays, Rec. 2020. CsPbI3 perovskite quantum dots (QDs) are one of the few known materials that are ideally suited to meet these criteria. Unfortunately, CsPbI3 perovskite QDs are prone to transform into a non-red-emitting phase and are subject to further degradation mechanisms when their luminescence wavelength is tuned to match that of the Rec. 2020 standard. Here, we show that zwitterionic lecithin ligands can stabilize the perovskite phase of CsPbI3 QDs for long periods in air for at least 6 months compared to a few days for control samples. LEDs fabricated with our ultrastable lecithin-capped CsPbI3 QDs exhibit an external quantum efficiency (EQE) of 7.1% for electroluminescence centered at 634 nm─a record for all-inorganic perovskite nanocrystals in Rec. 2020 red. Our devices achieve a maximum luminance of 1391 cd/m2 at 7.5 V, and their operational half-life is 33 min (T50) at 200 cd/m2─a 10-fold enhancement compared to control samples. Density functional theory results suggest that the surface strain in CsPbI3 QDs capped with the conventional ligands, oleic acid and oleylamine, contributes to the instability of the perovskite structural phase. On the other hand, lecithin binding induces virtually no surface strain and shows a stronger binding tendency for the CsPbI3 surface. Our study highlights the tremendous potential of zwitterionic ligands in stabilizing the perovskite phase and particle size of CsPbI3 QDs for various optoelectronic applications.

Suppression of Tumorigenicity 2 Pro-Inflammatory Biomarker Linking Diabetes Mellitus and Periodontitis: A Pilot Study.

BACKGROUND Suppression of tumorigenicity 2 (ST2) is a member of the interleukin (IL)-1 family and has 2 isoforms: ST2L, a transmembrane form, and ST2, a soluble form. IL-33 can act as an immune system alarm signal when released by damaged cells, which in turn activates other cells expressing the ST2 receptor. This can cause inflammatory cytokines to be released and produced, as well as trigger osteoclastogenesis. This study aimed to investigate the levels of soluble ST2 in gingival samples. MATERIAL AND METHODS The study population consisted of 30 individuals. The participants were divided into 3 groups: healthy participants, patients with periodontitis, and patients with periodontitis and diabetes mellitus. Periodontitis was determined using probing depth, clinical attachment loss, and gingival index. Patients with stage 2 to 4 periodontitis met the inclusion criteria. Gingival crevicular fluid (GCF) was collected for quantification of samples for ST2 levels by using an enzyme immunoassay. RESULTS The mean±standard deviation of ST2 GCF concentrations was relatively high (558.87±68.99) in the group with periodontitis and diabetes mellitus, compared with that of the periodontitis group (452.06±54.18) and healthy group (252.82±87.9). CONCLUSIONS GCF ST2 values were found to be a marker of inflammatory activities. Thus, GCF ST2 could be a potential biomarker for the diagnosis of periodontitis as well as systemic diseases, such as diabetes mellitus. This pilot study was limited by a small number of participants. To confirm the associations, more large-scale investigations should be conducted.

The Effect of Laser Micro Grooved Platform Switched Implants and Abutments on Early Crestal Bone Levels and Peri-Implant Soft Tissues Post 1 Year Loading among Diabetic Patients-A Controlled Clinical Trial.

Background and Objectives: The study aimed to compare the mean crestal bone level (CBL) and peri-implant soft tissue parameters in laser micro-grooved (LMG) platform switched implants and abutments (I&A) post 1 year of functional loading among non-diabetic and type II diabetic individuals. Materials and methods: Patients with an edentulous site having minimum bone height and width of ≥13 mm and ≥6 mm, respectively, were divided into two groups: (i) Non-diabetic-8 (control) and (ii) diabetic-8 (test). LMG Implants were placed and loaded immediately with a provisional prosthesis. Mean crestal bone level (MCBL) was evaluated radiographically at baseline and at 1 year. Peri-implant attachment level (PIAL) and relative position of the gingival margin (R-PGM) were recorded. Implant stability quotient (ISQ) level and implant survival rate (ISR) were evaluated at 1 year. Results: Early MCBL within the groups 1 year postloading was similar both mesially and distally (control-0.00 to 0.16 mm and 0.00 to 0.17 mm, respectively; test-0.00 to 0.21 mm and 0.00 to 0.22 mm, respectively) with statistical significance (p ≤ 0.003, p ≤ 0.001 and p ≤ 0.001, p ≤ 0.001, respectively). However, intergroup comparison showed no significant difference statistically in the MCBL in 1 year post functional loading. The peri-implant soft tissue parameters showed no significant difference between the groups. ISQ level between both groups did not reveal any significant changes (p ≤ 0.92), and ISR was 100%. Conclusions: LMG Implants resulted in minimal and comparable early crestal bone loss and soft tissue changes post 1 year of functional loading in moderately controlled diabetic and non-diabetic individuals, suggesting that this could be a reliable system for use in systemically compromised individuals.

VWC2 Increases Bone Formation Through Inhibiting Activin Signaling.

By a bioinformatics approach, we have identified a novel cysteine knot protein member, VWC2 (von Willebrand factor C domain containing 2) previously known as Brorin. Since Brorin has been proposed to function as a bone morphogenetic protein (BMP) antagonist, we investigated the binding of Brorin/VWC2 to several BMPs; however, none of the BMPs tested were bound to VWC2. Instead, the ßA subunit of activin was found as a binding partner among transforming growth factor (TGF)-ß superfamily members. Here, we show that Vwc2 gene expression is temporally upregulated early in osteoblast differentiation, VWC2 protein is present in bone matrix, and localized at osteoblasts/osteocytes. Activin A-induced Smad2 phosphorylation was inhibited in the presence of exogenous VWC2 in MC3T3-E1 osteoblast cell line and primary osteoblasts. The effect of VWC2 on ex vivo cranial bone organ cultures treated with activin A was investigated, and bone morphometric parameters decreased by activin A were restored with VWC2. When we further investigated the biological mechanism how VWC2 inhibited the effects of activin A on bone formation, we found that the effects of activin A on osteoblast cell growth, differentiation, and mineralization were reversed by VWC2. Taken together, a novel secretory protein, VWC2 promotes bone formation by inhibiting Activin-Smad2 signaling pathway.

Nanoengineering and Surface Modifications of Dental Implants.

Dental implants are one of the most important and successful advancements in modern dentistry. One aspect of dental implant design that influences the rate and degree of osseointegration is implant surface features. Nano-engineering techniques are anticipated to improve titanium dentistry implants' surface characteristics, which in turn promote peri-implant osteogenesis. In this paper, we review the recent advances in nanosurface engineering techniques for enhancing the bioactivity of dental implants.

Failure Rate of Dental Implants in the Esthetic Zone: A Systematic Review and Meta-Analysis.

The present systematic review and meta-analysis has systematically reviewed and analyzed dental implant failure for the implants placed in the esthetic zone. An electronic database search was performed in PubMed and ScienceDirect, including a manual search through the references using appropriate keywords and the PICO (population, intervention, control, and outcomes) format for the inclusion criteria. A total of 11 relevant articles were included. The quality of the randomized controlled trial (RCT) studies was assessed using the Cochrane Risk of Bias tool while the quality of non-randomized studies was assessed using the Newcastle Ottawa scale. Of the 11 articles included, 5 were RCTs, and 6 were non-randomized. The overall failure rate was found to be 2% (95% CI; 0.00-0.03%). The percentage marginal bone loss was estimated to be 1% (95% CI; 0.00 - 0.02%) and the mean and proportion pink esthetic scores were approximately 11.75 (0.43%) with 2% mid-facial soft tissue recession and the mesial and distal papillary recession was 0.02% and 0.01%, respectively. Based on this systematic review and meta-analysis, the rate of dental implant failure for implant placement in the esthetic zone was minimal. In addition, 1% proportional marginal bone loss and moderately high esthetic scores were found.

Oracle of phytic acid in dental panacea - Insight into properties, therapeutic effect, regeneration, materials interaction and oral physiology.

Phytic acid (inositol hexaphosphate/IP6) is a versatile chemical that is abundant in nature and is required for a variety of biological processes. It is harnessed in a wide range of fields, including drug discovery, daily supplies, chemical industries, medicine, and dentistry. IP6 is becoming increasingly popular in dentistry, with promising results. Several properties, such as cariostatic ability, beneficial impact on enamel disintegration, and anti-plaque, anti-tartar, and dental adhesive-forming properties, have been investigated thus far. Due to many constraints in the literature, there was a point in time when IP6 received less attention, which impacted knowledge in this field. Nevertheless, the positive outcomes of the flourishing of IP6 have recently been reconsidered from a number of papers that have improved our understanding of its modes of action in the aforementioned applications. The role of phytic acid in refining the properties and manoeuvring of dental resources is being investigated in novel endeavors in treating diseases of pulp and tissues supporting tooth structure, but to show its novel therapeutic potential, more precisely calibrated clinical trials are needed. This review examines and discusses the various uses proposed in the literature, as well as the applications of IP6 in dentistry.

Cellulitis in Hajj Pilgrims: Role of Environmental Temperature and Population Size of Pilgrims as a Contributory Factor.

Background Cellulitis is a common infection of the skin and subcutaneous tissue. Meteorological and environmental temperatures were previously identified as potential risk factors for causation and the patient's odds of hospitalization. In this regard, we aim to study the pattern of cellulitis during 10 Hajj seasons and examine the impact of changing seasonal temperatures and overall pilgrim populations as potential risk factors. Methodology In-hospital cellulitis was studied within the context of the Hajj. A retrospective review of pilgrim patients coded for cellulitis was undertaken for the Hajj seasons between 2004 and 2012. Possible roles of environmental temperatures, pilgrim population sizes, and ethnicity were examined as potential risk factors. Results A total of 381 patients belonging to 42 nationalities were identified, with 285 (75%) males and 96 (25%) females with a mean age of 63 years. On average, cellulitis accounted for 23.5% of general surgical admissions with proportional increases from 2004 to 2012 (r= 0.73, p= 0.016), which significantly correlated with the rise in seasonal temperatures (r = 0.7, p= 0.023). Conclusions The findings of this study identified cellulitis as a significant health risk during the Hajj, which is likely to be prevalent in warmer seasons. Our results may assist clinicians in educating Hajj pilgrims of different nationalities about the increased risk of cellulitis during warm seasons and possible predisposing environmental factors of infection.

Nanohydroxyapatite in dentistry: A comprehensive review.

Enamel, being the hardest and the highest mineralized tissue of the human body, contains nearly 96% inorganic components and 4% organic compounds and water. Dentin contains 65% inorganic components and 35% organic and water content. The translucency and white appearance of enamel are attributed to Hydroxyapatite (HA), which constitutes the major part of the inorganic component of dental hard tissue. With the advent of nanotechnology, the application of Nanohydroxyapatite (nHA) has piqued interest in dentistry due to its excellent mechanical, physical, and chemical properties. Compared to HA, nHA is found to have superior properties such as increased solubility, high surface energy and better biocompatibility. This is due to the morphological and structural similarity of nanosized hydroxyapatite particles to tooth hydroxyapatite crystals. These nanoparticles have been incorporated into various dental formulations for different applications to ensure comprehensive oral healthcare. To prevent dental caries, several nHA based dentifrices, mouth rinsing solutions and remineralizing pastes have been developed. nHA-based materials, such as nanocomposites, nano impression materials, and nanoceramics, have proven to be very effective in restoring tooth deformities (decay, fracture, and tooth loss). The nHA coating on the surface of the dental implant helps it bind to the bone by forming a biomimetic coating. A recent innovative strategy involves using nHA to reduce dentinal hypersensitivity and to reconstruct periodontal bone defects. The purpose of the present review is to discuss the different applications of nHA in dentistry, especially in preventive and restorative dentistry, dental implantology, bleaching and dentine hypersensitivity management.

Challenges Assessment in Endodontics Among Undergraduate Students.

Objective To explore perceptions of undergraduate dental students regarding difficulties faced during endodontic procedures. Methods An e-questionnaire was sent to 57 fourth-year and 45 fifth-year dental students. It comprised questions regarding demographic data and difficulties faced during different steps of the endodontic treatment. The responses were recorded on a 5-point Likert scale. During dichotomization, responses where one and two were chosen were considered yes whereas responses where three, four, and five were chosen were considered no. The sample size (SS) calculated using the Qualtrics SS calculator was 89. Data were analyzed using SPSS version 20. Frequencies and percentages were calculated. A p-value of less than 0.05 was considered significant. The chi-square test was applied for comparison based on the students' academic year and genders. Results Ninety students responded with an 88.2% response rate. Most students reported not facing any difficulty in differentiating healthy pulp and periapex from conditions of pulp pathosis (78.9%) and periapical pathosis (75.6%). Most males found access opening and de-roofing of the pulp chamber (35.6%) and working length determination (31.1%) difficult. Females reported having difficulty mostly in mesial and distal shift radiograph techniques (55.6%) and access openings (51.1%). No statistical difference was found based on an academic year or gender except in the use of mesial and distal shift techniques for radiograph acquisition Conclusion Assessing difficulties encountered by students during endodontic therapy can aid in the development of teaching strategies for preclinical and clinical instruction. Mesial and distal shift techniques, access cavity preparation, and working length determination are areas requiring more focus in the training process.

Assessment of Different Distraction Behavioral Methods in Pediatric Dental Clinic: A Systematic Review.

Dental anxiety is one of the main problems dentists may face during the treatment of pediatric dental patients; therefore, clinicians tend to perform different behavior management techniques to reduce dental anxiety in children. This review aimed to systematically compare and evaluate the published literature regarding the effects of distraction techniques on anxiety, pain perception, and patient experience during dental practice. A detailed electronic search was conducted on 3 databases including PubMed, Google Scholar, and Cochrane Library. The databases were searched for articles published in the English language between 2015 and 2022. Among 102 studies, 27 studies fulfilled the criteria of eligibility and were included in this study to be analyzed. Numerous approaches have been proposed for the reduction of dental anxiety, out of which the use of audio-visual aids and instruments, active distraction such as tablets, smartphones, and virtual reality glasses showed governance in decreasing the children's anxiety followed by cognitive and behavioral methods.

In Vitro Evaluation of Lithium Disilicate Endocrowns and Post and Core Crowns-A Systematic Review.

The aim of this systematic review was to summarize the results of the studies that have compared the physical and mechanical properties of lithium disilicate (LDS) endocrowns constructed for posterior teeth to those retained by post-and-core retention systems. The review was conducted following the PRISMA guidelines. The electronic search process was conducted on PubMed-Medline, Scopus, Embase and ISI Web of Knowledge (WoS) from the earliest available date till 31 January 2023. Additionally, the studies were assessed for their overall quality and risk of bias using the Quality Assessment Tool For In Vitro Studies (the QUIN). The initial search resulted in 291 articles, out of which, only 10 studies met the eligibility criteria. In all studies LDS endocrowns were compared with various kinds of endodontic posts and crowns made from other materials. There were no definite pattern or trends observed in the fracture strengths of tested specimens. There was no predilection observed in failure patters among the experimental specimens. No predilection was observed in the fracture strengths of LDS endocrowns when compared to post-and-core crowns. Furthermore, no differences in failure patterns could be observed when both types of restorations were compared. The authors propose standardized testing of endocrowns against post-and-core crowns in future studies. In conclusion, long-term clinical trials are advocated to compare the survival, failure and complication rates of LDS endocrowns and post-and-core restorations.

Red-Complex Bacterial Levels in Pregnant Women With Preeclampsia and Chronic Periodontitis.

OBJECTIVES: The presence of red-complex bacteria (RCB) has been associated with the occurrence of not only periodontal disease but also other systemic diseases, thereby potentiating an oral-systemic relationship. This study aimed to explore the levels of periodontal RCB in pregnant preeclamptic women with periodontal disease, potentiating the pathophysiology of a bacterial association in both periodontitis and preeclampsia. METHODS: Six hundred pregnant women (aged 20 to 35 years) in their third trimester were selected and divided into 3 groups comprising a control group (systemically and periodontally healthy pregnant women), group A (preeclamptic women with chronic periodontitis), and group B (preeclamptic women without chronic periodontitis). Demographic variables and periodontal parameters were recorded. Other variables such as systolic blood pressure (SBP) and diastolic blood pressure (DBP) and the urine protein content were also estimated. RCB, namely Porphyromonas gingivalis (Pg), Treponema denticola (Td), and Tenerella forsythia (Tf), were assessed in both subgingival plaque samples and placental samples of all the pregnant participants in the study. RESULTS: The mean weight, mean body mass index, mean SBP, mean DBP, and mean urine protein content were significantly elevated in group A and group B when compared to the control group. Preeclamptic women with chronic periodontitis (group A) had higher levels of plaque index, probing pocket depth, bleeding on probing, and clinical attachment level as compared with the other groups. The numbers of the RCB were found to be elevated in group A, out of which Pg was found to be more prevalent. CONCLUSIONS: Our findings indicate that the periodontal indices, blood pressure, and urine protein content were found to be higher in preeclamptic women with periodontitis. Hence, reducing the periodontal bacterial load in pregnant women via good oral hygiene maintenance would further reduce the putative risk of adverse pregnancy outcomes including preeclampsia in these women.

Role of Salivary Biomarkers in Diagnosis and Detection of Dental Caries: A Systematic Review.

Saliva plays a significant role in oral health and tooth integrity. Salivary components reduce tooth surface exposure to demineralization, protect against teeth wear and aid in enamel remineralization. There is a growing attempt to use salivary markers in diagnosing or predicting caries. However, despite the current information, there has yet to be an agreement among scholars. This study seeks to contribute more evidence on the suitability of salivary biomarkers in dental caries diagnosis. Eligible studies were electronically searched on online databases PubMed, Elsevier's Scopus, EMBASE and Web of Science, and all the studies that met the inclusion criteria were considered. The PECOS criteria guided the study selection process based on the study question. The risk of bias was assessed using the STROBE checklist. Eighteen articles were included in the analysis. All the studies presented relevant data concerning the study objectives. There was evidence of associations between salivary biomarkers and dental caries, and the correlations were either positive or negative. The studies presented significant heterogeneity; thus, a meta-analysis was not possible. Salivary biomarkers appeared to perform crucial and complementary functions toward tooth integrity and thus may be reliable in predicting or diagnosing dental caries in patients.

Accuracy of the Different Materials Used to Fabricate a Verification Jig of Implant-Supported Fixed Complete Dental Prostheses: An In Vitro Study.

Introduction The passive fit of a full arch implant-supported prosthesis is one of the elements influencing implant success. Achieving the passive fit of a prosthesis requires verification of the master cast before the fabrication of the framework. A verification jig is a common way to verify the implant master cast and ensure the accuracy of the implant impression and produced cast. Different materials can be used to fabricate verification jigs, and each material exhibits different dimensional changes. In this study, we compared the accuracies of verification jig materials by 3D assessment. Materials and methods A type IV stone cast with four implant analogs was constructed and used as a control. Verification jigs were constructed from five different materials, and test casts were made from these jigs and poured using low expansion stone (type IV), resulting in five groups (n=5). All test casts and the control cast were scanned using a lab scanner. The scans of test casts were superimposed on that of the control cast for 3D accuracy assessment. The distortion of the implant analogs was recorded using Geomagic Design X and Geomagic Control X software (3D Systems, Rock Hill, South Carolina, USA). Statistical differences in the 3D accuracies between the five groups were analyzed using the Kruskal-Wallis test. Result The photopolymerizable resin group had a mean value of 23.16 (± 0.88) µm; the composite group had a mean value of 46.72 (± 2.122) µm; the GC pattern group had a mean of 23.51 (± 0.736) µm; the type III stone group had a mean of 19.84 (± 1.017) µm; the type IV stone group had a mean of 18.72 (± 0.819) µm. The Kruskal-Wallis test indicated that there were statistically significant differences between groups 2 (composite), 4 (type III stone), and 5 (type IV stone).  Conclusion The most accurate cast was produced by type IV stone, followed by type III stone, photopolymerizable resin, GC pattern, and composite in order of decreasing accuracy. Within the limitations of the study, a material with low distortion and high accuracy is recommended when fabricating verification jigs of implant-supported complete dental prostheses.

Identification of the C-terminal region in Amelogenesis Imperfecta causative protein WDR72 required for Golgi localization.

Amelogenesis Imperfecta (AI) represents a group of hereditary conditions that manifest tooth enamel defects. Several causative mutations in the WDR72 gene have been identified and patients with WDR72 mutations have brown (or orange-brown) discolored enamel, rough enamel surface, early loss of enamel after tooth eruption, and severe attrition. Although the molecular function of WDR72 is not yet fully understood, a recent study suggested that WDR72 could be a facilitator of endocytic vesicle trafficking, which appears inconsistent with the previously reported cytoplasmic localization of WDR72. Therefore, the aims of our study were to investigate the tissues and cell lines in which WDR72 was expressed and to further determine the sub-cellular localization of WDR72. The expression of Wdr72 gene was investigated in mouse tissues and cell lines. Endogenous WDR72 protein was detected in the membranous fraction of ameloblast cell lines in addition to the cytosolic fraction. Sub-cellular localization studies supported our fractionation data, showing WDR72 at the Golgi apparatus, and to a lesser extent, in the cytoplasmic area. In contrast, a WDR72 AI mutant form that lacks its C-terminal region was exclusively detected in the cytoplasm. In addition, our studies identified a putative prenylation/CAAX motif within the last four amino acids of human WDR72 and generated a WDR72 variant, called CS mutant, in which the putative motif was ablated by a point mutation. Interestingly, mutation of the putative CAAX motif impaired WDR72 recruitment to the Golgi. Cell fractionation assays confirmed subcellular distribution of wild-type WDR72 in both cytosolic and membranous fractions, while the WDR72 AI mutant and CS mutant forms were predominantly detected in the cytosolic fraction. Our studies provide new insights into the subcellular localization of WDR72 and demonstrate a critical role for the C-terminal CAAX motif in regulating WDR72 recruitment to the Golgi. In accordance with structural modelling studies that classified WDR72 as a potential vesicle transport protein, our findings suggest a role for WDR72 in vesicular Golgi transport that may be key to understanding the underlying cause of AI.

Zinc Oxide Nanoparticles: A Review on Its Applications in Dentistry.

Nanotechnology in modern material science is a research hot spot due to its ability to provide novel applications in the field of dentistry. Zinc Oxide Nanoparticles (ZnO NPs) are metal oxide nanoparticles that open new opportunities for biomedical applications that range from diagnosis to treatment. The domains of these nanoparticles are wide and diverse and include the effects brought about due to the anti-microbial, regenerative, and mechanical properties. The applications include enhancing the anti-bacterial properties of existing restorative materials, as an anti-sensitivity agent in toothpastes, as an anti-microbial and anti-fungal agent against pathogenic oral microflora, as a dental implant coating, to improve the anti-fungal effect of denture bases in rehabilitative dentistry, remineralizing cervical dentinal lesions, increasing the stability of local drug delivery agents and other applications.