Emulsified and Nanoemulsified Essential Oils in the Control of Clostridium botulinum and Clostridium sporogenes in Mortadella.

Clostridium botulinum is a foodborne pathogen responsible for severe neuroparalytic disease associated with the ingestion of pre-formed toxin in food, with processed meats and canned foods being the most affected. Control of this pathogen in meat products is carried out using the preservative sodium nitrite (NaNO2), which in food, under certain conditions, such as thermal processing and storage, can form carcinogenic compounds. Therefore, the objective was to use nanoemulsified essential oils (EOs) as natural antimicrobial agents, with the aim of reducing the dose of NaNO2 applied in mortadella. The antimicrobial activity of nanoemulsions prepared with mixtures of EOs of garlic, clove, pink pepper, and black pepper was evaluated on endospores and vegetative cells of C. botulinum and Clostridium sporogenes (surrogate model) inoculated in mortadella prepared with 50 parts per million NaNO2. The effects on the technological (pH, water activity, and color) and sensory characteristics of the product were also evaluated. The combinations of EOs and their nanoemulsions showed sporicidal effects on the endospores of both tested microorganisms, with no counts observed from the 10th day of analysis. Furthermore, bacteriostatic effects on the studied microorganisms were observed. Regarding the technological and sensorial characteristics of the product, the addition of the combined EOs had a negative impact on the color of the mortadella and on the flavor/aroma. Despite the strong commercial appeal of adding natural preservatives to foods, the effects on flavor and color must be considered. Given the importance of controlling C. botulinum in this type of product, as well as the reduction in the amount of NaNO2 used, this combination of EOs represents a promising antimicrobial alternative to this preservative, encouraging further research in this direction.

Emerging Diagnostics in Clostridioides difficile Infection.

Clostridioides difficile detection in community settings is time-intensive, resulting in delays in diagnosing and quarantining infected individuals. However, with the advent of semi-automated devices and improved algorithms in recent decades, the ability to discern CDI infection from asymptomatic carriage has significantly improved. This, in turn, has led to efficiently regulated monitoring systems, further reducing endemic risk, with recent concerns regarding a possible surge in hospital-acquired Clostridioides difficile infections post-COVID failing to materialize. This review highlights established and emerging technologies used to detect community-acquired Clostridioides difficile in research and clinical settings.

Flower-Shaped PCR Scaffold-Based Lateral Flow Bioassay for Bacillus cereus Endospores Detection.

Bacillus cereus, a foodborne pathogen, produces resilient endospores that are challenging to detect with conventional methods. This study presents a novel Flower-Shaped PCR Scaffold-based Lateral Flow Biosensor (FSPCRS-LFB), which employs an aptamer-integrated PCR scaffold as capture probes, replacing the traditional streptavidin-biotin (SA-Bio) approach. The FSPCRS-LFB demonstrates high sensitivity and cost-efficiency in detecting B. cereus endospores, with a limit of detection (LOD) of 4.57 endospores/mL a visual LOD of 102 endospores/mL, and a LOD of 6.78 CFU/mL for endospore-cell mixtures. In chicken and tea samples, the platform achieved LODs of 74.5 and 52.8 endospores/mL, respectively, with recovery rates of 82.19% to 97.88%. Compared to existing methods, the FSPCRS-LFB offers a 3.7-fold increase in sensitivity while reducing costs by 26% over the SA-Bio strategy and 87.5% over rolling circle amplification (RCA). This biosensor provides a rapid, sensitive and cost-effective solution for point-of-care testing (POCT) of B. cereus endospores, expanding detection capabilities and offering novel approaches for pathogen detection.

New insights into peroxide toxicology: sporulenes help Bacillus subtilis endospores from hydrogen peroxide.

AIM: The purpose of the present study was to understand the possible events involved in the toxicity of hydrogen peroxide (H2O2) to wild and sporulene-deficient spores of Bacillus subtilis, as H2O2 was previously shown to have deleterious effects. METHODS AND RESULTS: The investigation utilized two strains of B. subtilis, namely the wild-type PY79 (WT) and the sporulene-deficient TB10 (ΔsqhC mutant). Following treatment with 0.05% H2O2 (v/v), spore viability was assessed using a plate count assay, which revealed a significant decrease in cultivability of 80% for the ΔsqhC mutant spores. Possible reasons for the loss of spore viability were investigated with microscopic analysis, dipicholinic acid (DPA) quantification and propidium iodide (PI) staining. Microscopic examinations revealed the presence of withered and deflated morphologies in spores of ΔsqhC mutants treated with H2O2, indicating a compromised membrane permeability. This was further substantiated by the absence of DPA and a high frequency (50%-75%) of PI infiltration. The results of fatty acid methyl ester analysis and protein profiling indicated that the potentiation of H2O2-induced cellular responses was manifested in the form of altered spore composition in ΔsqhC B. subtilis. The slowed growth rates of the ΔsqhC mutant and the heightened sporulene biosynthesis pathways in the WT strain, both upon exposure to H2O2, suggested a protective function for sporulenes in vegetative cells. CONCLUSIONS: Sporulenes serve as a protective layer for the inner membrane of spores, thus assuming a significant role in mitigating the adverse effects of H2O2 in WT B. subtilis. The toxic effects of H2O2 were even more pronounced in the spores of the ΔsqhC mutant, which lacks this protective barrier of sporulenes.

Geobacillus stearothermophilus and Bacillus atrophaeus spores exhibit linear inactivation kinetic performance when treated with an industrial scale vaporized hydrogen peroxide (VH2O2) sterilization process.

AIMS: This study aims to determine the inactivation kinetics of Geobacillus stearothermophilus and Bacillus atrophaeus biological indicators, treated with vaporized hydrogen peroxide (VH2O2) at an industrial scale. There is an assumption that sterilization processes generate linear kinetic plots of treated biological indicators that are used for informing probability-based decision-making by the MedTech industry for effective sterilization treatments; however, this has not been reported for sterilization using VH2O2. METHODS AND RESULTS: Survivor curves were generated, and sterilization performances were separately determined using G. stearothermophilus and B. atrophaeus biological indicators following the development of appropriate process challenge devices (PCDs). Regression analysis revealed that the inactivation kinetics for VH2O2-treated microorganisms exhibited log linear profiles. The use of scanning electron microscope (SEM) revealed no significant topographical changes in the outer surface of these VH2O2-treated spores. CONCLUSIONS: Both biological indicators exhibited log linear inactivation kinetics when treated with an industrial scale vaporized hydrogen peroxide (VH2O2) sterilization process. Therefore, this novel finding corroborates and proves the appropriateness of using VH2O2 as a sterilization method in accordance with applicable ISO standards.

Evaluation of the additive effects of volatile fatty acids and moderate heat treatment for enhancing the inactivation of vegetative cells and spores of Clostridium perfringens by flow cytometry.

OBJECTIVES: Clostridium perfringens is a well-known spore-forming bacterium that can resist the environment. A mixture of volatile fatty acids or thermal treatments can interact with these bacteria. The aim of this study was to evaluate the effects of different volatile fatty acid concentrations and moderate heat treatment on Clostridium perfringens sporulation. METHODS: A pure culture of Clostridium perfringens type A in Duncan Strong medium was treated with a mixture of volatile fatty acids at several concentrations. A thermal treatment was also tested. To evaluate the effects, a double staining method was employed, and treatments on Clostridium perfringens were analysed by flow cytometry. RESULTS: Moderate heat treatment destroyed vegetative forms but had no effect on sporulating forms. Volatile fatty acids combined with moderate heat treatment inhibited Clostridium perfringens sporulation. CONCLUSIONS: The use of flow cytometry as an original method for evaluating the treatment of Clostridium perfringens is of interest because of its simplicity, short time to obtain results, and the level of information provided on the microbial population (impact on metabolism). A combination of mild treatments (moderate heat treatment + volatile fatty acids) to decrease the Clostridium perfringens concentration when these bacteria sporulate is a very promising finding for inhibiting Clostridium perfringens propagation.

Imaging Clostridioides difficile Spore Germination and Germination Proteins.

Clostridioides difficile spores are the infective form for this endospore-forming organism. The vegetative cells are intolerant to oxygen and poor competitors with a healthy gut microbiota. Therefore, in order for C. difficile to establish infection, the spores have to germinate in an environment that supports vegetative growth. To initiate germination, C. difficile uses Csp-type germinant receptors that consist of the CspC and CspA pseudoproteases as the bile acid and cogerminant receptors, respectively. CspB is a subtilisin-like protease that cleaves the inhibitory propeptide from the pro-SleC cortex lytic enzyme, thereby activating it and initiating cortex degradation. Though several locations have been proposed for where these proteins reside within the spore (i.e., spore coat, outer spore membrane, cortex, and inner spore membrane), these have been based, mostly, on hypotheses or prior data in Clostridium perfringens. In this study, we visualized the germination and outgrowth process using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) and used immunogold labeling to visualize key germination regulators. These analyses localize these key regulators to the spore cortex region for the first time. IMPORTANCE Germination by C. difficile spores is the first step in the establishment of potentially life-threatening C. difficile infection (CDI). A deeper understanding of the mechanism by which spores germinate may provide insight for how to either prevent spore germination into a disease-causing vegetative form or trigger germination prematurely when the spore is either in the outside environment or in a host environment that does not support the establishment of colonization/disease.

ExsY, CotY, and CotE Effects on Bacillus anthracis Outer Spore Layer Architecture.

Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis are the major pathogens of the spore-forming genus Bacillus and possess an outer spore layer, the exosporium, not found in many of the nonpathogenic species. The exosporium consists of a basal layer with the ExsY, CotY, and BxpB proteins being the major structural components and an exterior nap layer containing the BclA glycoprotein. During the assembly process, the nascent exosporium basal layer is attached to the spore coat by a protein linker that includes the CotO and CotE proteins. Using transmission electron microscopy, Western blotting, immunofluorescence, and fluorescent fusion protein approaches, we examined the impact of single, double, and triple mutants of the major exosporium proteins on exosporium protein content and distribution. Plasmid-based expression of exsY and cotE resulted in increased production of exosporium lacking spores, and the former also resulted in outer spore coat disruptions. The exosporium bottlecap produced by exsY null spores was found to be more stable than previously reported, and its spore association was partially dependent on CotE. Deletion mutants of five putative spore genes (bas1131, bas1142, bas1143, bas2277, and bas3594) were created and shown not to have obvious effects on spore morphology or BclA and BxpB content. The BclC collagen-like glycoprotein was found to be present in the spore and possibly localized to the interspace region. IMPORTANCE B. anthracis is an important zoonotic animal pathogen causing sporadic outbreaks of anthrax worldwide. Spores are the infectious form of the bacterium and can persist in soil for prolonged periods of time. The outermost B. anthracis spore layer is the exosporium, a protein shell that is the site of interactions with both the soil and with the innate immune system of infected hosts. Although much is known regarding the sporulation process among members of the genus Bacillus, significant gaps in our understanding of the exosporium assembly process exist. This study provides evidence for the properties of key exosporium basal layer structural proteins. The results of this work will guide future studies on exosporium protein-protein interactions during the assembly process.

Rapid detection and quantitation of dipicolinic acid from Clostridium botulinum spores using mixed-mode liquid chromatography-tandem mass spectrometry.

Analysis of the dipicolinic acid (DPA) released from Clostridium botulinum spores during thermal processing is crucial to obtaining a mechanistic understanding of the factors involved in spore heat resistance and related food safety applications. Here, we developed a novel mixed-mode liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for detection of the DPA released from C. botulinum type A, nonproteolytic types B and F strains, and nonpathogenic surrogate Clostridium sporogenes PA3679 spores. DPA was retained on a mixed-mode C18/anion exchange column and was detected using electrospray ionization (ESI) positive mode within a 4-min analysis time. The intraday and interday precision (%CV) was 1.94-3.46% and 4.04-8.28%, respectively. Matrix effects were minimal across proteolytic type A Giorgio-A, nonproteolytic types QC-B and 202-F, and C. sporogenes PA3679 spore suspensions (90.1-114% of spiked DPA concentrations). DPA recovery in carrot juice and beef broth ranged from 105 to 118%, indicating limited matrix effects of these food products. Experiments that assessed the DPA released from Giorgio-A spores over the course of a 5-min thermal treatment at 108 °C found a significant correlation (R = 0.907; P < 0.05) between the log reduction of spores and amount of DPA released. This mixed-mode LC-MS/MS method provides a means for rapid detection of DPA released from C. botulinum spores during thermal processing and has the potential to be used for experiments in the field of food safety that assess the thermal resistance characteristics of various C. botulinum spore types.

Disinfection of an ambulance using a compact atmospheric plasma device.

AIMS: The worldwide spread of the coronavirus SARS-CoV-2 has highlighted the need for fast and simple disinfection processes, amongst others for ambulance cars on site. To overcome current drawbacks regarding room disinfection, the use of cold atmospheric plasma in remote operation represents a promising alternative for the disinfection of larger volumes. In this study, a compact plasma system was evaluated regarding its disinfection efficiency inside an ambulance car. METHODS AND RESULTS: The developed plasma device is based on a dielectric barrier discharge (DBD) and operates with ambient air as process gas. The humidified afterglow from the plasma nozzle was introduced into an ambulance car with a volume of approximately 10 m3 while Bacillus atrophaeus endospores, Staphylococcus aureus or Phi 6 bacteriophages dried on different surfaces (PET-films, glass slides or aluminum foil) were exposed to the reactive gas inside the ambulance vehicle at eight different positions. Reductions of spores by more than 4 orders of magnitude were found on all surfaces and positions within 2 h. Due to their higher susceptibility, Phi 6 bacteriophages and S. aureus counts were reduced by at least 4 orders of magnitude within 30 min on all surfaces. CONCLUSION: The results show that different microorganisms dried on variable surfaces can be inactivated by several orders of magnitude inside an ambulance by plasma gas from of a compact DBD plasma nozzle. SIGNIFICANCE AND IMPACT OF THE STUDY: Plasma gas generated on site by a DBD plasma nozzle proved to be highly efficient for the disinfection of the interior of an ambulance car. Compact plasma systems could be a viable alternative for the disinfection of vehicles or rooms.

Efficacy of EPA-registered disinfectants against two human norovirus surrogates and Clostridioides difficile endospores.

AIMS: To determine the efficacy of a panel of nine EPA-registered disinfectants against two human norovirus (HuNoV) surrogates (feline calicivirus [FCV] and Tulane virus [TuV]) and Clostridioides difficile endospores. METHODS AND RESULTS: Nine EPA-registered products, five of which contained H2 O2 as active ingredient, were tested against infectious FCV, TuV and C. difficile endospores using two ASTM methods, a suspension and carrier test. Efficacy claims against FCV were confirmed for 8 of 9 products. The most efficacious product containing H2 O2 as ingredient achieved a >5.1 log reduction of FCV and >3.1 log reduction of TuV after 5 min, and >6.0 log reduction of C. difficile endospores after 10 min. Of the five products containing H2 O2 , no strong correlation (R2  = 0.25, p = 0.03) was observed between disinfection efficacy and H2 O2 concentration. Addition of 0.025% ferrous sulphate to 1% H2 O2 solution improved efficacy against FCV, TuV and C. difficile. CONCLUSION: Disinfectants containing H2 O2 are the most efficacious disinfection products against FCV, TuV and C. difficile endospores. Product formulation, rather than the concentration of H2 O2 in a product, impacts the efficacy of a disinfection product. SIGNIFICANCE AND IMPACT OF STUDY: H2 O2 -based disinfectants are efficacious against surrogate viruses for HuNoV and C. difficile endospores.

High-Pressure-Based Strategies for the Inactivation of Bacillus subtilis Endospores in Honey.

Honey is a value-added product rich in several types of phenolic compounds, enzymes, and sugars recently explored in biomedical and food applications. Nevertheless, even though it has a low water activity (aW ≈ 0.65) that hinders the development of pathogenic and spoilage microorganisms, it is still prone to contamination by pathogenic microorganisms (vegetative and spores) and may constitute harm to special groups, particularly by immunosuppressed people and pregnant women. Thus, an efficient processing methodology needs to be followed to ensure microbial safety while avoiding 5-hydroxymethylfurfural (HMF) formation and browning reactions, with a consequent loss of biological value. In this paper, both thermal (pressure-assisted thermal processing, PATP) and nonthermal high-pressure processing (HPP), and another pressure-based methodology (hyperbaric storage, HS) were used to ascertain their potential to inactivate Bacillus subtilis endospores in honey and to study the influence of aW on the inactivation on this endospore. The results showed that PATP at 600 MPa/15 min/75 °C of diluted honey (52.9 °Brix) with increased aW (0.85 compared to ≈0.55, the usual honey aW) allowed for inactivating of at least 4.0 log units of B. subtilis spores (to below detection limits), while HS and HPP caused neither the germination nor inactivated spores (i.e., there was neither a loss of endospore resistance after heat shock nor endospore inactivation as a consequence of the storage methodology). PATP of undiluted honey even at harsh processing conditions (600 MPa/15 min/85 °C) did not impact the spore load. The results for diluted honey open the possibility of its decontamination by spores' inactivation for medical and pharmaceutical applications.

Quantification of endospores in ancient permafrost using time-resolved terbium luminescence.

We describe herein a simple procedure for quantifying endospore abundances in ancient and organic-rich permafrost. We repeatedly (10x) extracted and fractionated permafrost using a tandem filter assembly composed of 3 and 0.2 µm filters. Then, the 0.2 µm filter was washed (7x), autoclaved, and the contents eluted, including dipicolinic acid (DPA). Time-resolved luminescence using Tb(EDTA) yielded a LOD of 1.46 nM DPA (6.55 × 103 endospores/mL). In review, DPA/endospore abundances were ~2.2-fold greater in older 33 ky permafrost (258 ± 36 pmol DPA gdw-1; 1.15 × 106 ± 0.16 × 106 spores gdw-1) versus younger 19 ky permafrost (p = 0.007297). This suggests that dormancy increases with permafrost age.

Phylogenetic relationship of phototrophic heliobacteria and systematic reconsideration of species and genus assignments based on genome sequences of eight species.

The draft genome sequences of five species of named phototrophic heliobacteria in the order Clostridiales were determined. Whole genome phylogenetic and average nucleotide identity comparison for the heliobacteria suggests that Heliobacterium chlorum and Heliobacillus mobilis are closely related to one another and belong to the same genus. The three species Heliobacterium modesticaldum, Heliobacterium undosum and Heliobacterium gestii all belong in the same genus, but are more divergent from Hbt. chlorum and belong in a separate genus, which we suggest to be called Heliomicrobium. Heliorestis convoluta is properly recognized to be in the same genus as Heliorestis acidaminivorans. Heliophilum fasciatum is clearly unlike any other and rightfully belongs in a separate genus.

Survival of Clostridioides difficile in finished dairy compost under controlled conditions.

AIM: The survival of Clostridioides difficile (previously Clostridium difficile) vegetative cells and endospores was compared at different levels of indigenous microflora using autoclaved and unautoclaved dairy composts with different moisture contents (MCs). METHODS AND RESULTS: Both types of composts adjusted to 20, 30 and 40% MCs were inoculated with a suspension of C. difficile that contained both vegetative cells (c. 5-6 log CFU per gram) and endospores (c. 5·0 CFU per gram), and then stored aerobically inside a humidity-controlled chamber at room temperature 22·5 ± 0·8°C for 1 year. The level of indigenous microflora was very stable during the storage after day 7 in both types of compost. The greatest reductions of C. difficile vegetative cell counts occurred during the first 24 h of storage in autoclaved and unautoclaved composts, which had 4·7 and 5·5 log CFU per gram with 20% MC, 1·8 and 2·1 log CFU per gram with 30% MC, and 2·3 and 1·3 log CFU per gram with 40% MC, respectively. Both MC and the duration of storage have significant (P < 0·05) effects on the survival of vegetative cells for first 120 days of storage. The slow inactivation of C. difficile vegetative cells at higher MCs during aerobic storage was confirmed by exponentially decaying modelling data during the early stage of aerobic exposure. The reduction of endospore counts (<1·0 log CFU per gram) during the storage for both types of compost at all MCs was not significant (P > 0·05) except for the autoclaved compost with 30% MC. CONCLUSION: The highly resistant C. difficile endospores to the unfavourable environmental conditions survived for more than a year while vegetative cells died off exponentially upon the initial aerobic exposure. SIGNIFICANCE AND IMPACT OF THE STUDY: The long-term survival of C. difficile endospores in contaminated compost may transmit the pathogen to fresh produce, animals or water in pre-harvest conditions.

Opportunities for the application of real-time bacterial cell analysis using flow cytometry for the advancement of sterilization microbiology.

Medical devices provide critical care and diagnostic applications through patient contact. Sterility assurance level (SAL) may be defined as the probability of a single viable micro-organism occurring on an item after a sterilization process. Sterilization microbiology often relies upon using an overkill validation method where a 12-log reduction in recalcitrant bacterial endospore population occurs during the process that exploits conventional laboratory-based culture media for enumeration. This timely review explores key assumptions underpinning use of conventional culture-based methods in sterilization microbiology. Consideration is given to how such methods may limit the ability to fully appreciate the inactivation kinetics of a sterilization process such as vaporized hydrogen peroxide (VH2O2) sterilization, and consequently design efficient sterilization processes. Specific use of the real-time flow cytometry (FCM) is described by way of elucidating the practical relevance of these limitation factors with implications and opportunities for the sterilization industry discussed. Application of FCM to address these culture-based limitation factors will inform real-time kinetic inactivation modelling and unlock potential to embrace emerging opportunities for pharma, medical device and sterilization industries including potentially disruptive applications that may involve reduced usage of sterilant.

Assessment of the response of indigenous microflora and inoculated Bacillus licheniformis endospores in reconstituted skim milk to microwave and conventional heating systems by flow cytometry.

Heat treatment is one of the most widely used processing technologies in the dairy industry. Its primary purpose is to destroy microorganisms, both pathogenic and spoilage, to ensure the product is safe and has a reasonable shelf life. In this study microwave volumetric heating (MVH) was compared with a conventional tubular heat exchanger (THE), in terms of the effects of each at a range of temperatures (75°C, 85°C, 95°C, 105°C, 115°C, and 125°C) on indigenous microflora viability and the germination of inoculated Bacillus licheniformis endospores in reconstituted skim milk. To assess the heat treatment-related effects on microbial viability, classical agar-based tests were applied to obtain the counts of 4 various microbiological groups including total bacterial, thermophilic bacterial, mesophilic aerobic bacterial endospore, and thermophilic aerobic bacterial endospore counts, and additional novel insights into cell permeability and spore germination profiles post-heat treatment were obtained using real-time flow cytometry (FC) methods. No significant differences in the plate counts of the indigenous microorganisms tested, the plate counts of the inoculated B. licheniformis, or the relative percentage of germinating endospores were observed between MVH- and THE-treated samples, at equal temperatures in the range specified above, indicating that both methods inactivated inoculated endospores to a similar degree (up to 70% as measured by FC and 5 log reduction as measured by plate counting for some treatments of inoculated endospores). Furthermore, increased cell permeability of indigenous microflora was observed by FC after MVH compared with THE treatment of uninoculated skim milk, which was reflected in lower total bacterial count at a treatment temperature of 105°C. This work demonstrates the utility of FC as a rapid method for assessing cell viability and spore inactivation for postthermal processing in dairy products and overall provides evidence that MVH is at least as effective at eliminating native microflora and inoculated B. licheniformis endospores as THE.

Applications of Bacillus subtilis Spores in Biotechnology and Advanced Materials.

The bacterium Bacillus subtilis has long been an important subject for basic studies. However, this organism has also had industrial applications due to its easy genetic manipulation, favorable culturing characteristics for large-scale fermentation, superior capacity for protein secretion, and generally recognized as safe (GRAS) status. In addition, as the metabolically dormant form of B. subtilis, its spores have attracted great interest due to their extreme resistance to many environmental stresses, which makes spores a novel platform for a variety of applications. In this review, we summarize both conventional and emerging applications of B. subtilis spores, with a focus on how their unique characteristics have led to innovative applications in many areas of technology, including generation of stable and recyclable enzymes, synthetic biology, drug delivery, and material sciences. Ultimately, this review hopes to inspire the scientific community to leverage interdisciplinary approaches using spores to address global concerns about food shortages, environmental protection, and health care.

Alkalibaculum sporogenes sp. nov., isolated from a terrestrial mud volcano and emended description of the genus Alkalibaculum.

A novel anaerobic, endospore-forming bacterium (strain M08 DMBT) was isolated from a terrestrial mud volcano (Taman Peninsula, Russia). Cells of the strain were motile rods 1.3-2.0 µm long and 0.4 µm in diameter. The temperature range for growth was 5-42 °C, with an optimum at 30 °C. The pH range for growth was H 6.5-11.0, with an optimum at pH 8.0. Growth of strain M08 DMBT was observed at NaCl concentrations of 0-5.0 % (w/v) with an optimum at 1.0 %. Strain M08 DMBT utilized 3,4-dimethoxybenzoic acid, 2-methoxyphenol, carbon monoxide, glucose, fructose, mannose, xylose and yeast extract. The end product of glucose fermentation was acetate. The DNA G+C content of strain M08 DMBT was 32.3 mol% (obtained via whole genome sequencing). The closest phylogenetic relative of strain M08 DMBT was Alkalibaculum bacchi (family Eubacteriaceae, class Clostridia) with 95.17 % 16S rRNA gene sequence similarity. Based on the phenotypic, genotypic and phylogenetic characteristics of the isolate, strain M08 DMBT is considered to represent a novel species of the genus Alkalibaculum, for which the name Alkalibaculum sporogenes sp. nov. is proposed. The type strain of Alkalibaculum sporogenes is M08 DMBT (=KCTC 15840T=VKM B-3387T).

Detection of biotin with zeptomole sensitivity using recombinant spores and a competition assay.

Detection of protein-binding analytes is important for many applications. Currently, various instrument-based techniques are used for detecting protein-binding analytes. However, such techniques have several limitations including high cost and time-consuming sample processing. In order to overcome these limitations, we developed a sensitive competition assay for the detection of protein-binding analytes using recombinant endospores as a sensing element. The method is based on the competition between the biotin, the model analyte, and a biotin-magnetic bead complex to bind the recombinant spores containing the biotin binding region of streptavidin. After magnetic attraction, the residual spores in the suspension are spread on plates to form colonies which are used to count the amount of the residual spores; the higher the residual ratio of spores, the more biotin in the samples. The linear range was from 150 zmol to 1.5 fmol and the limit of detection of the assay was 150 zmol. The assay proposed herein is sensitive and does not require any expensive equipment. It is suitable for qualitative or semi-quantitative analysis such as screening tests for the detection of toxic chemicals.