Preparation of Practical High-Performance Electrodes for Acidic and Alkaline Media Water Electrolysis.

The synthesis of electrocatalyst and the electrode preparation were merged into a one-step process and proved to be a versatile method to synthesize metal oxide electrocatalysts on the conductive carbon paper (CP). Very simply, the metal precursor deposited on the CP was thermally treated by a torch-gun for just 6 s, resulting in the formation of RuO2 , Co3 O4 , and mixed oxide nanoparticles. The material could be directly used as working electrode for oxygen evolution reaction (OER). Compared with commercial and other state-of-the-art electrocatalysts, the fabricated electrode showed a superior electrocatalytic activity for OER in 1 m HClO4 and 1 m KOH in terms of not only a low overpotential to reach 10 mA cm-2 but also a high current density at 1.6 VRHE with satisfying a long-term stability. The novel strategy without requiring time-consuming and uneconomical steps could be expanded to the preparation of various metal oxides on conductive substrates towards diverse electrocatalytic applications.

A Highly-Efficient Oxygen Evolution Electrocatalyst Derived from a Metal-Organic Framework and Ketjenblack Carbon Material.

The composite of the metal-organic framework (MOF) Ni(Fe)-MOF-74 and the highly conductive carbon material ketjenblack (KB) could be easily obtained from the in-situ MOF synthesis in a one-step solvothermal reaction. The composite material features a remarkable electrochemical oxygen evolution reaction (OER) performance where the overpotential at 10 mA/cm2 and the current density at 1.7 VRHE are recorded as 0.274 VRHE and 650 mA/cm2 , respectively, in 1 mol/L KOH. In particular, the activation of nickel-iron clusters from the MOF under an applied anodic bias steadily boosts the OER performance. Although Ni(Fe)-MOF-74 goes through some structural modification during the electrochemical measurements, the stabilized and optimized composite material shows excellent OER performance. This simple strategy to design highly-efficient electrocatalysts, utilizing readily available precursors and carbon materials, will leverage the use of diverse metal-organic complexes into electrode fabrication with a high energy conversion efficiency.

In situ total scattering experiments of nucleation and crystallisation of tantalum-based oxides: from highly dilute solutions via cluster formation to nanoparticles.

The exact formation mechanism of tantalum oxides (and in general, metal/mixed metal oxides) from alkoxide precursors is still not fully understood, particularly when forming cluster-like or amorphous materials. The structural evolution of Ta-based oxides was studied in detail using X-ray total scattering experiments along with subsequent pair distribution function (PDF) analyses. Starting from a tantalum alkoxide precursor (Ta2(OEt)10), the formation of hydrolysed TaxOyHz clusters in highly diluted aqueous solution was analysed. From the PDF data, the connectivity and arrangement of TaxOy octahedra in the cluster could be deduced as well as the approximate size of the clusters (<1 nm). Construction of cluster models allowed for identification of common structural motifs in the TaxOyHz clusters, ruling out the formation of chain- or ring-like clusters. More likely, bulky clusters with a high number of corner-sharing octahedra are formed. After separation of the amorphous solid from the liquid, temperature-induced crystallisation processes were monitored via in situ total scattering experiments. Between room temperature and 600 °C, only small rearrangements of the amorphous structure are observed. At about 610 °C, amorphous TaxOyHz transforms directly into crystalline orthorhombic L-Ta2O5 without formation of any crystalline intermediate structures.

Dual Role of Silver Moieties Coupled with Ordered Mesoporous Cobalt Oxide towards Electrocatalytic Oxygen Evolution Reaction.

Herein, we show that the performance of mesostructured cobalt oxide electrocatalyst for oxygen evolution reaction (OER) can be significantly enhanced by coupling of silver species. Various analysis techniques including pair distribution function and Rietveld refinement, X-ray absorption spectroscopy at synchrotron as well as advanced electron microscopy revealed that silver exists as metallic Ag particles and well-dispersed Ag2 O nanoclusters within the mesostructure. The benefits of this synergy are twofold for OER: highly conductive metallic Ag improves the charge transfer ability of the electrocatalysts while ultra-small Ag2 O clusters provide the centers that can uptake Fe impurities from KOH electrolyte and boost the catalytic efficiency of Co-Ag oxides. The current density of mesostructured Co3 O4 at 1.7 VRHE is increased from 102 to 211 mA cm-2 with incorporation of silver spices. This work presents the dual role of silver moieties and demonstrates a simple method to increase the OER activity of Co3 O4 .

Ag(I) ions working as a hole-transfer mediator in photoelectrocatalytic water oxidation on WO3 film.

Ag(I) is commonly employed as an electron scavenger to promote water oxidation. In addition to its straightforward role as an electron acceptor, Ag(I) can also capture holes to generate the high-valent silver species. Herein, we demonstrate photoelectrocatalytic (PEC) water oxidation and concurrent dioxygen evolution by the silver redox cycle where Ag(I) acts as a hole-transfer mediator. Ag(I) enhances the PEC performance of WO3 electrodes at 1.23 V vs. RHE with increasing O2 evolution, while forming Ag(II) complexes (AgIINO3+). Upon turning off both light and potential bias, the photocurrent immediately drops to zero, whereas O2 evolution continues over ~10 h with gradual bleaching of the colored complexes. This phenomenon is observed neither in the Ag(I)-free PEC reactions nor in the photocatalytic (i.e., bias-free) reactions with Ag(I). This study finds that the role of Ag(I) is not limited as an electron scavenger and calls for more thorough studies on the effect of Ag(I).

How g-C3N4 Works and Is Different from TiO2 as an Environmental Photocatalyst: Mechanistic View.

Graphitic carbon nitride (CN) as a popular visible light photocatalyst needs to be better understood for environmental applications. The behaviors of CN as an environmental photocatalyst were systematically studied in comparison with a well-known TiO2 photocatalyst. The two photocatalysts exhibit different photocatalytic oxidation (PCO) behaviors and dependences on the experimental conditions (e.g., pH, Pt loading, and the kind of organic substrate and scavenger). The PCO of organic substrates was significantly enhanced by loading Pt on TiO2 under UV light (λ > 320 nm), whereas Pt-CN exhibited a lower PCO activity than bare CN under visible light (λ > 420 nm). While the presence of Pt enhances the charge separation in both TiO2/UV and CN/visible light systems (confirmed by transient IR absorption spectroscopic analysis), the opposite effects of Pt are ascribed to the different mechanisms of •OH generation in the two photocatalytic systems. The negative effect of Pt on CN is ascribed to the fact that Pt catalytically decomposes in situ-generated H2O2 (a main precursor of OH radical), which hinders •OH production. The production of OH radicals on CN is favored only at acidic pH but 1O2 generation is dominant in alkaline pH. The pH-dependent behaviors of reactive oxygen species generation on CN were confirmed by electron paramagnetic resonance spin trap measurements.

Highly Active Cobalt-Based Electrocatalysts with Facile Incorporation of Dopants for the Oxygen Evolution Reaction.

In situ formation of electroactive cobalt species for the oxygen evolution reaction is simply achieved by applying an anodic bias to a commercially available cobalt precursor and Nafion binder mixture coated on a glassy carbon electrode. This preparation does not require energy-intensive materials preparation steps or noble metals, yet a low overpotential of 322 mV at 10.2 mA cm-2 and a high current density of more than 300 mA cm-2 at 1.7 VNHE were obtained in 1 m KOH. An operando electrochemical Raman spectroscopy study confirmed the formation of cobalt oxyhydroxide species and the iron stimulated the equilibrium state between Co3+ and Co4+ . The iron present in the alkali electrolyte or ink solution effectively activated the cobalt species, and most of the first row transition metals could also enhance the catalytic performance. The concept presented here is one of the simplest strategies for preparing highly active electrocatalysts and is very flexible for the replacement of cobalt by other transition metals.

Selective dual-purpose photocatalysis for simultaneous H2 evolution and mineralization of organic compounds enabled by a Cr2O3 barrier layer coated on Rh/SrTiO3.

Dual-functional photocatalysis for H2 evolution with the simultaneous mineralization of 4-chlorophenol was achieved under de-aerated conditions using a Cr2O3/Rh/SrTiO3 photocatalyst which has Rh nanoparticles covered with a thin Cr2O3 barrier layer to selectively control and maximize the dual-functional photocatalytic activity.

Molecular-level understanding of the photocatalytic activity difference between anatase and rutile nanoparticles.

The generation of oxidants on illuminated photocatalysts and their participation in subsequent reactions are the main basis of the widely investigated photocatalytic processes for environmental remediation and selective oxidation. Here, the generation and the subsequent diffusion of (·)OH from the illuminated TiO2 surface to the solution bulk were directly observed using a single-molecule detection method and this molecular phenomenon could explain the different macroscopic behavior of anatase and rutile in photocatalysis. The mobile (·)OH is generated on anatase but not on rutile. Therefore, the photocatalytic oxidation on rutile is limited to adsorbed substrates whereas that on anatase is more facile and versatile owing to the presence of mobile (·)OH. The ability of anatase to generate mobile (·)OH is proposed as a previously unrecognized key factor that explains the common observations that anatase has higher activity than rutile for many photooxidative reactions.

Catalytic templating approaches for three-dimensional hollow carbon/graphene oxide nano-architectures.

We report a catalytic templating method to synthesize well-controlled three-dimensional carbon nano-architectures. Depending on graphene oxide content, the morphology can be systematically tuned from layered composites to 3D hollow structures to microporous materials. The composites with high surface area and high porosity induce a significant enhancement to its capacitance at high current density.