Two decades of research in dietary acrylamide: What do we know today.

After nearly two decades since acrylamide was first raised as a potential safety issue in foods, significant progress has been made in understanding its formation during cooking, how to reduce levels in the most concerned foods, and the possible cancer risk to humans. Despite the huge wealth of knowledge gathered on this topic over the past years, a few new discoveries in occurrence, mitigation, analysis and risk assessment are worthy to note. This short review highlights the salient novelties pertaining to acrylamide, particularly in the areas of formation & analysis, existing and possible future regulations in the European Union, and finally considerations that may lead to possibly revisiting the toxicity of acrylamide and the main metabolite, glycidamide.

Salivary nitrate/nitrite and acetaldehyde in humans: potential combination effects in the upper gastrointestinal tract and possible consequences for the in vivo formation of N-nitroso compounds-a hypothesis.

Subsequent to the dietary uptake of nitrate/nitrite in combination with acetaldehyde/ethanol, combination effects resulting from the sustained endogenous exposure to nitrite and acetaldehyde may be expected. This may imply locoregional effects in the upper gastrointestinal tract as well as systemic effects, such as a potential influence on endogenous formation of N-nitroso compounds (NOC). Salivary concentrations of the individual components nitrate and nitrite and acetaldehyde are known to rise after ingestion, absorption and systemic distribution, thereby reflecting their respective plasma kinetics and parallel secretion through the salivary glands as well as the microbial/enzymatic metabolism in the oral cavity. Salivary excretion may also occur with certain drug molecules and food constituents and their metabolites. Therefore, putative combination effects in the oral cavity and the upper digestive tract may occur, but this has remained largely unexplored up to now. In this Guest Editorial, published evidence on exposure levels and biokinetics of nitrate/nitrite/NOx, NOC and acetaldehyde in the organism is reviewed and knowledge gaps concerning combination effects are identified. Research is suggested to be initiated to study the related unresolved issues.

Issues surrounding consumer trust and acceptance of existing and emerging food processing technologies.

The purpose of food processing today is to make food safer, more nutritious and tastier, and to increase storage life. Consumers have a lack of trust in the way food is produced, formulated and processed, particularly with possible contaminants or chemical residues from production. Food manufacturers are not seen as being highly trusted sources. This may partly result from manufacturers' reluctance to share all information and to protect intellectual property via patents and thus maintain a competitive edge. There is a need to inform the consumer better about what operations the involved ingredients are subjected to and why. Various ways of food processing are reviewed. New food processing technologies face challenges when introduced and factors influencing consumers' and other stakeholders' acceptance should be part of decision-making process when adopting new technologies. Consumers' perception of risks is not the same as the risk assessment made by experts. A few specific cases are being discussed to further highlight the multiplicity of factors that may contribute to the development of a certain consumer perception about a product or a class of products. This is also linked to the emergence of certain terminologies that are associated with an increasingly negative perception of the processing of foods. We recommend more transparency on food formulation and food processing to restore consumer trust, which enables to take the advantage of the benefits different processing methods offer. Food manufacturers must make an effort to let consumers know how their food is being processed within the walls of the factory and highlight the benefits vis-à-vis preparing foods in a domestic environment.

Contribution to the ongoing discussion on fluoride toxicity.

Since the addition of fluoride to drinking water in the 1940s, there have been frequent and sometimes heated discussions regarding its benefits and risks. In a recently published review, we addressed the question if current exposure levels in Europe represent a risk to human health. This review was discussed in an editorial asking why we did not calculate benchmark doses (BMD) of fluoride neurotoxicity for humans. Here, we address the question, why it is problematic to calculate BMDs based on the currently available data. Briefly, the conclusions of the available studies are not homogeneous, reporting negative as well as positive results; moreover, the positive studies lack control of confounding factors such as the influence of well-known neurotoxicants. We also discuss the limitations of several further epidemiological studies that did not meet the inclusion criteria of our review. Finally, it is important to not only focus on epidemiological studies. Rather, risk analysis should consider all available data, including epidemiological, animal, as well as in vitro studies. Despite remaining uncertainties, the totality of evidence does not support the notion that fluoride should be considered a human developmental neurotoxicant at current exposure levels in European countries.

Toxicity of fluoride: critical evaluation of evidence for human developmental neurotoxicity in epidemiological studies, animal experiments and in vitro analyses.

Recently, epidemiological studies have suggested that fluoride is a human developmental neurotoxicant that reduces measures of intelligence in children, placing it into the same category as toxic metals (lead, methylmercury, arsenic) and polychlorinated biphenyls. If true, this assessment would be highly relevant considering the widespread fluoridation of drinking water and the worldwide use of fluoride in oral hygiene products such as toothpaste. To gain a deeper understanding of these assertions, we reviewed the levels of human exposure, as well as results from animal experiments, particularly focusing on developmental toxicity, and the molecular mechanisms by which fluoride can cause adverse effects. Moreover, in vitro studies investigating fluoride in neuronal cells and precursor/stem cells were analyzed, and 23 epidemiological studies published since 2012 were considered. The results show that the margin of exposure (MoE) between no observed adverse effect levels (NOAELs) in animal studies and the current adequate intake (AI) of fluoride (50 µg/kg b.w./day) in humans ranges between 50 and 210, depending on the specific animal experiment used as reference. Even for unusually high fluoride exposure levels, an MoE of at least ten was obtained. Furthermore, concentrations of fluoride in human plasma are much lower than fluoride concentrations, causing effects in cell cultures. In contrast, 21 of 23 recent epidemiological studies report an association between high fluoride exposure and reduced intelligence. The discrepancy between experimental and epidemiological evidence may be reconciled with deficiencies inherent in most of these epidemiological studies on a putative association between fluoride and intelligence, especially with respect to adequate consideration of potential confounding factors, e.g., socioeconomic status, residence, breast feeding, low birth weight, maternal intelligence, and exposure to other neurotoxic chemicals. In conclusion, based on the totality of currently available scientific evidence, the present review does not support the presumption that fluoride should be assessed as a human developmental neurotoxicant at the current exposure levels in Europe.

Furan and Methylfurans in Foods: An Update on Occurrence, Mitigation, and Risk Assessment.

The acceptance of many foods is related to traditional cooking practices, which create taste and texture and are important to digestibility, preservation, and the reduction of foodborne illnesses. A wide range of compounds are formed during the cooking of foods, a number of these have been shown to lead to adverse effects in classical toxicological models and are known as food processing contaminants (FPC). It is essential that the presence and effects of such compounds alone and in combination within the diet are understood such that proportionate risk management measures can be developed, while taking a holistic view across the whole value chain. Furan and alkylfurans (principally 2- and 3-methylfuran) are highly volatile FPC, which are formed in a wide range of foods at low amounts. The focus of research to-date has been on those foods, which have been identified to be most consequential in terms of being sources of exposure, namely jarred and canned foods for infants and young children (meals and drinks) and coffee (roast and ground, soluble). This report presents (i) new industry data on the occurrence of furan and methylfurans in selected food categories following previous coffee studies, (ii) the most salient parameters that impact furan formation, and (iii) aspects of importance for the risk assessment.

Confirmation of the full conversion of ethylene oxide to 2-chloroethanol in fumigated foodstuffs: possible implications for risk assessment.

This study describes the extension of a gas chromatography mass spectrometry (GC-MS) method, initially devoted to the analysis of ethylene oxide (EO) in ice cream, to a larger range of food items including herbs, spices, vegetables, inorganic salts, food supplements, thickeners, etc. Results are reported as EOTotal according to EC 2015/868 definition (expressed as EO equivalents as the sum of native EO and 2-chloroethanol (2-CE) after acidic hydrolysis) with a limit of quantification at 0.01 mg/kg regardless of the food item. Its ruggedness was demonstrated through fortification experiments on hundreds of samples. Re-analysis of 146 positive food samples without hydrolysis demonstrated that not EO but 2-CE is the predominant analyte detected in the different processed ingredients suspected to have been previously treated with EO. A series of eight contaminated dried herbs and spices were also re-analysed by four ISO 17025 accredited commercial laboratories making use of different analytical strategies for EO determination in foods. Each laboratory reported EOTotal levels within the same concentration range, but the resulting reproducibility ranged from 23% to 41% depending on the sample. Additionally, we show that results of free EO from methods based on conversion to 2-iodoethanol may lead to artefactual detection of native EO (false positive). An official method of analysis applicable for different food matrices would be useful to avoid discrepancies of results. Altogether, these data re-enforce the fact that in absence of native EO in food items, risk assessment of EO in foodstuffs should consider the predominance of 2-CE. A toxicological risk assessment using the food additive xanthan gum as a case study is discussed.

Evaluation of the genotoxic potential of acrylamide: Arguments for the derivation of a tolerable daily intake (TDI value).

This opinion of the Senate Commission on Food Safety (SKLM) of the German Research Foundation (Deutsche Forschungsgemeinschaft, DFG) presents arguments for an updated risk assessment of diet-related exposure to acrylamide (AA), based on a critical review of scientific evidence relevant to low dose exposure. The SKLM arrives at the conclusion that as long as an appropriate exposure limit for AA is not exceeded, genotoxic effects resulting in carcinogenicity are unlikely to occur. Based on the totality of the evidence, the SKLM considers it scientifically justified to derive a tolerable daily intake (TDI) as a health-based guidance value.

Analysis of ethylene oxide in ice creams manufactured with contaminated carob bean gum (E410).

Residues of ethylene oxide (EO), a banned fumigant in the EU, were found at amounts above the maximum residue limit (MRL) in carob (locust) bean gum (additive E410). The pesticide entered the food chain via stabiliser blends that are used as minor ingredients in the manufacture of ice cream. Consequently, all products that contained the non-compliant ingredient were withdrawn or recalled in several countries across the EU, in most cases irrespective of whether the pesticide residue was detectable or not in the final product. This is the first report of a reliable method to determine EO and its metabolite/marker compound 2-chloroethanol (2-CE), either together or independently in ice cream, with a limit of quantification at 0.01 mg EO/kg and recovery in the range of 87-104% across the levels investigated (0.01, 0.02 and 0.06 mg EO/kg). The method applies QuEChERS extraction and isotope dilution gas chromatography coupled with tandem mass spectrometry (GC-MS/MS). High resolution mass spectrometry (HRMS) confirmed the specificity of low mass ions. Data on the stability of EO and 2-CE under thermal conditions revealed that 2-CE is relatively stable in an ice cream matrix (ca. 80% recovery of spiked material). Importantly, this study also demonstrates that not EO, but 2-CE is the predominant analyte detected in the contaminated samples, which is new information of significance in terms of the overall risk assessment of EO in foodstuffs.

Occurrence of the Plant Growth Regulator Chlormequat in Food May Be Due to Natural Formation: A Preliminary Mechanistic Study.

The study reports the role of choline and compounds thereof in the formation of chlormequat under thermal conditions, with emphasis on the molecular mechanism involved in the transformation. The data show the decomposition of choline to chlormequat at 200 °C in presence of chloride ions, likely by nucleophilic substitution. Furthermore, the results suggest that phosphatidylcholine, glycerophosphocholine, and phosphocholine are the effective precursors of chlormequat under sufficient thermal conditions due to their capability to degrade to choline and/or the ability of the phosphate moiety to behave as a good leaving group with respect to nucleophilic attacks. Thermal treatments (120 and 200 °C) applied to egg powder, rich in phosphatidylcholine, and wheat flour, with choline at a substantial level, suggest that less energy is required for obtaining chlormequat from phosphatidylcholine than from choline. This observation is consistent with the postulated mechanism of a nucleophilic substitution with phosphate moieties acting as better leaving groups than the hydroxyl group.

Thermal degradation of 2-furoic acid and furfuryl alcohol as pathways in the formation of furan and 2-methylfuran in food.

This study reports the heat-induced formation of furan by decarboxylation of 2-furoic acid, and 2-methylfuran by dehydration of furfuryl alcohol under dry conditions. Model systems were incubated at temperatures up to 190 °C, followed by quantitative determination of furan and 2-methylfuran performed by isotope dilution headspace gas chromatography-mass spectrometry. Results show that 2-furoic acid decarboxylation and furfuryl alcohol dehydration are activated as from about 140-160 °C. Furfuryl alcohol and 2-furoic acids were measured in a selection of roasted coffee products by isotope dilution liquid chromatography-high resolution mass spectrometry, and the data evidenced a strong correlation between the two compounds, suggesting an intimate mechanistic relationship between them. The possible oxidation of furfuryl alcohol to furfural and 2-furoic acid in heated food is raised with particular emphasis on coffee roasting. These findings are relevant for better understanding the formation of furan and alkylfurans in food, and ultimately opening avenues for mitigation.

Mineral oil hydrocarbons in foods: is the data reliable?

The contamination of foods with mineral oil hydrocarbons (MOH) is a serious concern, requiring in most cases tedious mitigation measures that span across the whole food supply chain. A major issue today is the significant variability of the results generated by laboratories. This study was therefore designed to achieve a deeper insight into the analytical procedures used by commercial laboratories, identifying possible gaps and suggesting improvements that will enhance the reliability of the MOH data, an important prerequisite for risk assessment. In total six different food matrices, i.e. infant formula (IF), cocoa butter, cocoa powder, biscuits, fruit-based baby food containing biscuit and roast and ground coffee were subjected to comparative inter-laboratory studies, as well as one vegetable oil analysed within the frame of a professionally conducted proficiency test. The results indicate that on some matrices with possibly low amounts of MOH contamination, the current methodologies cannot reliably conclude whether or not a food sample is indeed contaminated with mineral oils (<10 mg/kg food). Urgently needed are: (i) an aligned and fully validated sample preparation strategy tested on a range of different food matrices; (ii) a confirmation of positive flame ionisation detection (FID) results by confirmatory methods such as mass spectrometry - in line with the CEN Standard and the Joint Research Centre (JRC) Guidance Document, (iii) a more detailed root-cause analysis in the reports of laboratories through the use of mineral oil markers, and (iv) a fully validated official method for the concerned foods with a limit of application <10 mg/kg food.

Synergism between the toxicity of chlorophenols and iron complexes.

Synergistic interactions could prove to be relevant when evaluating the toxicity of environmental pollutants in a complex mixture, especially when organic and inorganic substances co-occur at concentrations currently considered to be low-toxic or sublethal. Escherichia coli cells (SR-9 strain) were used as a model system for studying the cellular toxicity of environmental pollutants. Exposure of bacterial cells to a combination of pentachlorophenol (PCP) and a positively charged complex of iron or copper caused a dramatic inhibition of growth and an increase in cell death. Incubation of bacterial cells with PCP and either ferric-1,10-phenanthroline complex [Fe3+(OP)3]3+ (500 and 5 microM, respectively) or cupric-1,10-phenanthroline complex [Cu2+(OP)2]2+ (400 and 0.05 microM, respectively) showed two and four log units of cell death, respectively, in 30 min. In contrast, only minor amounts of cell death were observed with each component alone. Similar effects have been shown for other positively charged complexes of transition metals and for other biocides. The observed synergism was associated with the formation of novel noncharged and lipophilic ternary complexes, which contain PCP anions (or other polychlorinated anions) and the iron (or copper) complex. The ternary complexes demonstrated effective transport of their components into the cells.

Process-induced formation of imidazoles in selected foods.

The presence of 4-methylimidazole (4-MEI), 2-methylimidazole (2-MEI) and 2-acetyl-4-tetrahydroxybutylimidazole (THI) in some foods may result from the usage of caramel colorants E150c and E150d as food additives. This study demonstrates that alkylimidazoles are also byproducts formed from natural constituents in foods during thermal processes. A range of heat-processed foods that are known not to contain caramel colorants were analyzed by isotope dilution LC-MS/MS to determine the contamination levels. Highest 4-MEI concentrations (up to 466µg/kg) were observed in roasted barley, roasted malt and cocoa powders, with the concomitant presence of 2-MEI and/or THI in some cases, albeit at significantly lower levels. Low amounts of 4-MEI (<20µg/kg) were also detected in cereal-based foods such as breakfast cereals and bread toasted to a brown color (medium toasted). The occurrence of 4-MEI in certain processed foods is therefore not a reliable indicator of the presence of the additives E150c or E150d.

Heat-induced formation of mepiquat by decarboxylation of pipecolic acid and its betaine derivative. Part 1: Model system studies.

This study describes, for the first time, the role of pipecolic acid betaine and pipecolic acid, naturally present in some foods, in the formation of the plant growth regulator N,N-dimethylpiperidinium (mepiquat) under dry thermal conditions. The formation of mepiquat and intermediate compounds was investigated in model systems using high performance liquid chromatography-quadrupole/time-of-flight mass spectrometry. Mepiquat is released with a yield of up to 0.66mol% after thermal treatment (>150°C) of pipecolic acid betaine. Similar conversion rates are attained with the congener piperidine-2-carboxylic acid (dl-pipecolic acid), albeit in the presence of alkylating agents, such as choline, glycine betaine or trigonelline, that are fairly widespread in food crops. These new pathways to mepiquat indicate that the occurrence of low levels of this thermally induced compound is probably more widespread in processed foods than initially suspected (see Part 2 of this study on the occurrence of mepiquat in selected foodstuffs).

Heat-induced formation of mepiquat by decarboxylation of pipecolic acid and its betaine derivative. Part 2: Natural formation in cooked vegetables and selected food products.

Mepiquat (N,N-dimethylpiperidinium) is a plant growth regulator registered for use as its chloride salt in many countries on cereals and other crops. Recent model system studies have shown that natural chemicals present in crop plants, such as pipecolic acid and pipecolic acid betaine, may furnish mepiquat through different chemical pathways, when subjected to temperatures in the range of 200°C. In this study, we cooked raw vegetables that did not contain mepiquat to a palatable state using different traditional cooking methods, and detected mepiquat in 9 out of 11 oven-cooked vegetables, reaching up to 189µg/kg dry wt in oven-cooked broccoli. Commercial oven potato fries generated mepiquat during cooking, typically in the range of 20-60µg/kg. Only traces of mepiquat (<5µg/kg) were found in commercial potato crisps. This work demonstrates that mepiquat occurs at µg/kg levels in a variety of cooked vegetables, including potatoes.

Understanding the contamination of food with mineral oil: the need for a confirmatory analytical and procedural approach.

The contamination of food by mineral oil hydrocarbons (MOHs) found in packaging is a long-running concern. A main source of MOHs in foods is the migration of mineral oil from recycled board into the packed food products. Consequently, the majority of food manufacturers have taken protective measures, e.g., by using virgin board instead of recycled fibres and, where feasible, introducing functional barriers to mitigate migration. Despite these protective measures, MOHs may still be observed in low amounts in certain food products, albeit due to different entry points across the food supply chain. In this study, we successfully apply gas chromatography coupled to mass spectrometry (GC-MS) to demonstrate, through marker compounds and the profile of the hydrocarbon response, the possible source of contamination using mainly chocolate and cereals as food matrices. The conventional liquid chromatography-one-dimensional GC coupled to a flame ionisation detector (LC-GC-FID) is a useful screening method, but in cases of positive samples it must be complemented by a confirmatory method such as, for example, GC-MS, allowing a verification of mineral oil contamination. The procedural approach proposed in this study entails profile analysis, marker identification, and interpretation and final quantification.

Mepiquat: A Process-Induced Byproduct in Roasted Cereal-Based Foodstuffs.

Mepiquat, a growth regulator widely used in agriculture, is also known as a process-induced byproduct formed in coffee from natural constituents during heat treatments such as roasting. This study examines mepiquat formation in cereal-based foodstuffs treated at sufficiently high temperature to trigger methyl transfer reactions that involve glycine betaine and choline naturally present in cereals. Color measurements of roasted barley grains revealed a correlation between thermal treatment and mepiquat content. Trials at industrial scale on instant beverages composed of roasted cereals demonstrated significant increases in mepiquat during the thermal process (in the range of 140-205 µg/kg in final products). A targeted survey of commercial products showed mepiquat in the range 69-381 µg/kg in powdered cereal instant drinks and 42-168 µg/kg in mugicha tea, a roasted barley infusion. These findings will not significantly affect the exposure of consumers to mepiquat due to the low amounts detected.

Analytical Approaches to Verify Food Integrity: Needs and Challenges.

A brief overview of the main analytical approaches and practices to determine food authenticity is presented, addressing, as well, food supply chain and future requirements to more effectively mitigate food fraud. Food companies are introducing procedures and mechanisms that allow them to identify vulnerabilities in their food supply chain under the umbrella of a food fraud prevention management system. A key step and first line of defense is thorough supply chain mapping and full transparency, assessing the likelihood of fraudsters to penetrate the chain at any point. More vulnerable chains, such as those where ingredients and/or raw materials are purchased through traders or auctions, may require a higher degree of sampling, testing, and surveillance. Access to analytical tools is therefore pivotal, requiring continuous development and possibly sophistication in identifying chemical markers, data acquisition, and modeling. Significant progress in portable technologies is evident already today, for instance, as in the rapid testing now available at the agricultural level. In the near future, consumers may also have the ability to scan products in stores or at home to authenticate labels and food content. For food manufacturers, targeted analytical methods complemented by untargeted approaches are end control measures at the factory gate when the material is delivered. In essence, testing for food adulterants is an integral part of routine QC, ideally tailored to the risks in the individual markets and/or geographies or supply chains. The development of analytical methods is a first step in verifying the compliance and authenticity of food materials. A next, more challenging step is the successful establishment of global consensus reference methods as exemplified by the AOAC Stakeholder Panel on Infant Formula and Adult Nutritionals initiative, which can serve as an approach that could also be applied to methods for contaminants and adulterants in food. The food industry has taken these many challenges aboard, working closely with all stakeholders and continuously communicating on progress in a fully transparent manner.