Achieving Molecular Sieving of CO2 from CH4 by Controlled Dynamical Movement and Host-Guest Interactions in Ultramicroporous VOFFIVE-1-Ni by Pillar Substitution.

Engineering the building blocks in metal-organic materials is an effective strategy for tuning their dynamical properties and can affect their response to external guest molecules. Tailoring the interaction and diffusion of molecules into these structures is highly important, particularly for applications related to gas separation. Herein, we report a vanadium-based hybrid ultramicroporous material, VOFFIVE-1-Ni, with temperature-dependent dynamical properties and a strong affinity to effectively capture and separate carbon dioxide (CO2) from methane (CH4). VOFFIVE-1-Ni exhibits a CO2 uptake of 12.08 wt % (2.75 mmol g-1), a negligible CH4 uptake at 293 K (0.5 bar), and an excellent CO2-over-CH4 uptake ratio of 2280, far exceeding that of similar materials. The material also exhibits a favorable CO2 enthalpy of adsorption below -50 kJ mol-1, as well as fast CO2 adsorption rates (90% uptake reached within 20 s) that render the hydrolytically stable VOFFIVE-1-Ni a promising sorbent for applications such as biogas upgrading.

Ambient Aqueous Synthesis of Imine-Linked Covalent Organic Frameworks (COFs) and Fabrication of Freestanding Cellulose Nanofiber@COF Nanopapers.

Covalent organic frameworks (COFs) are usually synthesized under solvothermal conditions that require the use of toxic organic solvents, high reaction temperatures, and complicated procedures. Additionally, their insolubility and infusibility present substantial challenges in the processing of COFs. Herein, we report a facile, green approach for the synthesis of imine-linked COFs in an aqueous solution at room temperature. The key behind the synthesis is the regulation of the reaction rate. The preactivation of aldehyde monomers using acetic acid significantly enhances their reactivity in aqueous solutions. Meanwhile, the still somewhat lower imine formation rate and higher imine breaking rates in aqueous solution, in contrast to conventional solvothermal synthesis, allow for the modulation of the reaction equilibrium and the crystallization of the products. As a result, highly crystalline COFs with large surface areas can be formed in relatively high yields in a few minutes. In total, 16 COFs are successfully synthesized from monomers with different molecular sizes, geometries, pendant groups, and core structures, demonstrating the versatility of this approach. Notably, this method works well on the gram scale synthesis of COFs. Furthermore, the aqueous synthesis facilitates the interfacial growth of COF nanolayers on the surface of cellulose nanofibers (CNFs). The resulting CNF@COF hybrid nanofibers can be easily processed into freestanding nanopapers, demonstrating high efficiency in removing trace amounts of antibiotics from wastewater. This study provides a route to the green synthesis and processing of various COFs, paving the way for practical applications in diverse fields.

Risk factors for mortality in patients admitted to a psychiatric acute ward: A prospective cohort study.

INTRODUCTION: Associations between psychiatric disorders and mortality have been extensively studied, but limited evidence exists regarding influence of clinical characteristics on mortality risk, at the time of acute psychiatric hospitalization. METHODS: A prospective total-cohort study included all patients consecutively admitted to Haukeland University Hospital's psychiatric acute ward in Bergen, Norway between 2005 and 2014 (n = 6125). Clinical interviews were conducted at the first admission within the study period, and patients were subsequently followed for up to 15 years in the Norwegian Cause of Death Registry. Competing risks regression models were used to investigate associations between clinical characteristics at first admission and the risk of natural and unnatural death during follow-up. RESULTS: The mean age at first admission and at time of death was 42.5 and 62.8 years, respectively, and the proportion of women in the sample was 47.2%. A total of 1381 deaths were registered during follow-up, of which 65.5% had natural, 30.4% unnatural, and 4.1% unknown causes. Higher age, male sex, unemployment, cognitive deficits, and physical illness were associated with increased risk of natural death. Male sex, having no partner, physical illness, suicide attempts, and excessive use of alcohol and illicit substances were associated with increased risk of unnatural death. CONCLUSION: Psychiatric symptoms, except suicide attempts, were unrelated to increased mortality risk. In the endeavor to reduce the increased mortality risk in people with mental disorders, focus should be on addressing modifiable risk factors linked to physical health and excessive use of alcohol and illicit substances.

Electrochemical Doping and Structural Modulation of Conductive Metal-Organic Frameworks.

In this study, we introduce an electrochemical doping strategy aimed at manipulating the structure and composition of electrically conductive metal-organic frameworks (c-MOFs). Our methodology is exemplified through a representative c-MOF, Ni3(HITP)2 (HITP=2, 3, 6, 7, 10, 11-hexaiminotriphenylene), synthesized into porous thin films supported by nanocellulose. While the c-MOF exhibits characteristic capacitive behavior in neutral electrolyte; it manifests redox behaviors in both acidic and alkaline electrolytes. Evidence indicates that the organic ligands within c-MOF undergo oxidation (p-doping) and reduction (n-doping) when exposed to specific electrochemical potentials in acidic and alkaline electrolyte, respectively. Interestingly, the p-doping process proves reversible, with the c-MOF structure remaining stable across cyclic p-doping/de-doping. In contrast, the n-doping is irreversible, leading to the gradual decomposition of the framework into inorganic species over a few cycles. Drawing on these findings, we showcase the versatile electrochemical applications of c-MOFs and their derived composites, encompassing electrochemical energy storage, electrocatalysis, and ultrafast actuation. This study provides profound insights into the doping of c-MOFs, offering a new avenue for modulating their chemical and electronic structure, thereby broadening their potential for diverse electrochemical applications.

Green, General and Low-cost Synthesis of Porous Organic Polymers in Sub-kilogram Scale for Catalysis and CO2 Capture.

Porous organic polymers (POPs) with high porosity and tunable functionalities have been widely studied for use in gas separation, catalysis, energy conversion and energy storage. However, the high cost of organic monomers, and the use of toxic solvents and high temperatures during synthesis pose obstacles for large-scale production. Herein, we report the synthesis of imine and aminal-linked POPs using inexpensive diamine and dialdehyde monomers in green solvents. Theoretical calculations and control experiments show that using meta-diamines is crucial for forming aminal linkages and branching porous networks from [2+2] polycondensation reactions. The method demonstrates good generality in that 6 POPs were successfully synthesized from different monomers. Additionally, we scaled up the synthesis in ethanol at room temperature, resulting in the production of POPs in sub-kilogram quantities at a relatively low cost. Proof-of-concept studies demonstrate that the POPs can be used as high-performance sorbents for CO2 separation and as porous substrates for efficient heterogeneous catalysis. This method provides an environmentally friendly and cost-effective approach for large-scale synthesis of various POPs.

Use of Benzodiazepines and Antipsychotic Drugs Are Inversely Associated With Acute Readmission Risk in Schizophrenia.

PURPOSE: Little is known about the impact of different psychotropic drugs on acute readmission risk, when used concomitantly in a real-life setting. We aimed to investigate the association between acute readmission risk and use of antipsychotic drugs, antidepressants, mood stabilizers, and benzodiazepines in patients with schizophrenia. METHODS: A cohort study included all patients diagnosed with schizophrenia admitted to a psychiatric acute unit at Haukeland University Hospital in Bergen, Norway, during a 10-year period (N = 663). Patients were followed from discharge until first readmission or censoring. Cox multiple regression analyses were conducted using antipsychotic drugs, antidepressants, mood stabilizers, and benzodiazepines as time-dependent variables, and periods of use and nonuse were compared within individual patients. Adjustments were made for sex, age at index admission, and excessive use of alcohol and illicit substances. RESULTS: A total of 410 patients (61.8%) were readmitted during follow-up, and the mean and median times in days to readmission were 709 and 575, respectively. Compared with nonuse, the use of antipsychotic drugs was associated with reduced risk of readmission (adjusted hazards ratio, 0.20; P < 0.01; confidence interval, 0.16-0.24), and the use of benzodiazepines was associated with increased risk of readmission (adjusted hazards ratio, 1.51; P < 0.01; confidence interval, 1.13-2.02). However, no relation to readmission risk was found for the use of antidepressants and mood stabilizers. CONCLUSIONS: We found that use of benzodiazepines and antipsychotic drugs are inversely associated with acute readmission risk in schizophrenia.

Bioavailability of Celecoxib Formulated with Mesoporous Magnesium Carbonate-An In Vivo Evaluation.

An attractive approach to increase the aqueous apparent solubility of poorly soluble drugs is to formulate them in their amorphous state. In the present study, celecoxib, a poorly soluble drug, was successfully loaded into mesoporous magnesium carbonate (MMC) in its amorphous state via a solvent evaporation method. Crystallization of celecoxib was suppressed, and no reaction with the carrier was detected. The MMC formulation was evaluated in vitro and in vivo in terms of oral bioavailability. Celebra®, a commercially available formulation, was used as a reference. The two celecoxib formulations were orally administrated in male rats (average of n = 6 animals per group), and blood samples for plasma were taken from all animals at different time points after administration. There was no statistical difference (p > 0.05) in AUCinf between the two formulations. The results showed that MMC may be a promising drug delivery excipient for increasing the bioavailability of compounds with solubility-limited absorption.

Cladophora Cellulose: Unique Biopolymer Nanofibrils for Emerging Energy, Environmental, and Life Science Applications.

Because of its natural abundance, hierarchical fibrous structure, mechanical flexibility, potential for chemical modification, biocompatibility, renewability, and abundance, cellulose is one of the most promising green materials for a bio-based future and sustainable economy. Cellulose derived from wood or bacteria has dominated the industrial cellulose market and has been developed to produce a number of advanced materials for applications in energy storage, environmental, and biotechnology areas. However, Cladophora cellulose (CC) extracted from green algae has unprecedented advantages over those celluloses because of its high crystallinity (>95%), low moisture adsorption capacity, excellent solution processability, high porosity in the mesoporous range, and associated high specific surface area. The unique physical and chemical properties of CC can add new features to and enhance the performance of nanocellulose-based materials, and these attributes have attracted a great deal of research interest over the past decade. This Account summarizes our recent research on the preparation, characterization, functionalization, and versatile applications of CC. Our aim is to provide a comprehensive overview of the uniqueness of CC with respect to material structure, properties, and emerging applications. We discuss the potential of CC in energy storage, environmental science, and life science, with emphasis on applications in which its properties are superior to those of other nanocellulose forms. Specifically, we discuss the production of the first-ever paper battery based on CC. This battery has initiated a rising interest in the development of sustainable paper-based energy storage devices, where cellulose is used as a combined building block and binder for paper electrodes of various types in combination with carbon, conducting polymers, and other electroactive materials. High-active-mass and high-mass-loading paper electrodes can be made in which the CC acts as a high-surface-area and porous substrate while a thin layer of electroactive material is coated on individual nanofibrils. We have shown that CC membranes can be used directly as battery separators because of their low moisture content, high mesoporosity, high thermal stability, and good electrolyte wettability. The safety, stability, and capacity of lithium-ion batteries can be enhanced simply by using CC-based separators. Moreover, the high chemical modifiability and adjustable porosity of dried CC papers allow them to be used as advanced membranes for environmental science (water and air purification, pollutant adsorption) and life science (virus isolation, protein recovery, hemodialysis, DNA extraction, bioactive substrates). Finally, we outline some concluding perspectives on the challenges and future directions of CC research with the aim to open up yet unexplored fields of use for this interesting material.

Assembly of Discrete Chalcogenolate Clusters into a One-Dimensional Coordination Polymer with Enhanced Photocatalytic Activity and Stability.

Interlinking discrete supertetrahedral chalcogenolate clusters with conjugated bipyridine linkers form a one-dimensional coordination polymer, [Cd6Ag4(SPh)16(DMF)(H2O)(bpe)]n (1a), displaying a broader visible-light absorption and a narrower band gap than those of the discrete cluster. More importantly, the coordination polymer demonstrates enhanced activity and stability for the photocatalytic degradation of organic dye in water.

An Aqueous Conducting Redox-Polymer-Based Proton Battery that Can Withstand Rapid Constant-Voltage Charging and Sub-Zero Temperatures.

Electrodes based on organic matter operating in aqueous electrolytes enable new approaches and technologies for assembling and utilizing batteries that are difficult to achieve with traditional electrode materials. Here, we report how thiophene-based trimeric structures with naphthoquinone or hydroquinone redox-active pendent groups can be processed in solution, deposited, dried and subsequently polymerized in solid state to form conductive (redox) polymer layers without any additives. Such post-deposition polymerization offers efficient use of material, high mass loading (up to 10 mg cm-2 ) and good flexibility in the choice of substrate and coating method. By employing these materials as anode and cathode in an acidic aqueous electrolyte a rocking-chair proton battery is built. The battery shows good cycling stability (85 % after 500 cycles), withstands rapid charging, with full capacity (60 mAh g-1 ) reached within 100 seconds, allows for direct integration with photovoltaics, and retains its favorable characteristics even at -24 °C.

Highly Transparent, Flexible, and Mechanically Strong Nanopapers of Cellulose Nanofibers @Metal-Organic Frameworks.

Freestanding nanopapers were fabricated by the assembly of metal-organic frameworks (MOFs) onto cellulose nanofibers (CNFs). The CNFs are wrapped by continuously nucleated MOF layers (CNF@MOF) by interfacial synthesis, with the charge density on the surface of the CNFs and the dosage of the surfactant polyvinylpyrrolidone (PVP) being carefully adjusted. The obtained CNF@MOF nanofibers with long-range, continuous, hybrid nanostructures were very different to the composites formed by aggregation of MOF nanoparticles on the substrates. Four typical MOFs (HKUST-1, Al-MIL-53, Zn-MOF-74, ZIF-CO3 -1) were successfully grown onto CNFs in aqueous solutions and further fabricated into freestanding nanopapers. Because of their unique nanostructures and morphologies, the corresponding flexible nanopapers exhibit hierarchical meso-micropores, high optical transparency, high thermal stability, and high mechanical strength. A proof-of-concept study shows that the CNF@MOF nanopapers can be used as efficient filters to separate volatile organic compounds (VOCs) from the air. This work provides a new path for structuring MOF materials that may boost their practical application.

Exploring the Use of Amine Modified Mesoporous Magnesium Carbonate for the Delivery of Salicylic Acid in Topical Formulations: In Vitro Cytotoxicity and Drug Release Studies.

Salicylic acid (SA) has for a long time been used to treat various skin disorders due to its anti-inflammatory, bacteriostatic, and antifungal properties. In the present work, mesoporous magnesium carbonate (MMC), a promising drug carrier, was modified with 3-aminopropyl-triethoxysilane to enable loading of SA. The amine modified MMC (aMMC) was successfully loaded with 8 wt.% of SA via a solvent evaporation method. SA was later completely released from the carrier in less than 15 min. Furthermore, the cytotoxicity of the functionalized material was evaluated. aMMC was found to be non-toxic for human dermal fibroblast cells with particle concentration of up to 1000 µg/mL when exposed for 48 h. The presented results form the basis of future development of aMMC as a potential carrier for SA in dermatological applications.

Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries.

Poor cycling stability and safety concerns regarding lithium (Li) metal anodes are two major issues preventing the commercialization of high-energy density Li metal-based batteries. Herein, a novel tri-layer separator design that significantly enhances the cycling stability and safety of Li metal-based batteries is presented. A thin, thermally stable, flexible, and hydrophilic cellulose nanofiber layer, produced using a straightforward paper-making process, is directly laminated on each side of a plasma-treated polyethylene (PE) separator. The 2.5 µm thick, mesoporous (≈20 nm average pore size) cellulose nanofiber layer stabilizes the Li metal anodes by generating a uniform Li+ flux toward the electrode through its homogenous nanochannels, leading to improved cycling stability. As the tri-layer separator maintains its dimensional stability even at 200 °C when the internal PE layer is melted and blocks the ion transport through the separator, the separator also provides an effective thermal shutdown function. The present nanocellulose-based tri-layer separator design thus significantly facilitates the realization of high-energy density Li metal-based batteries.

Spectroscopic and Physicochemical Characterization of Sulfonated Cladophora Cellulose Beads.

The work presents a full physicochemical characterization of sulfonated cellulose beads prepared from Cladophora nanocellulose intended for use in biological systems. 2,3-Dialdehyde cellulose (DAC) beads were sulfonated, and transformation of up to 50% of the aldehyde groups was achieved, resulting in highly charged and porous materials compared to the compact surface of the DAC beads. The porosity could be tailored by adjusting the degree of sulfonation, and a subsequent reduction of the aldehyde groups to hydroxyl groups maintained the bead structure without considerable alteration of the surface properties. The thermal stability of the DAC beads was significantly increased with the sulfonation and reduction reactions. Raman spectroscopy also showed to be a useful technique for the characterization of sulfonated cellulose materials.

Blood Compatibility of Sulfonated Cladophora Nanocellulose Beads.

Sulfonated cellulose beads were prepared by oxidation of Cladophora nanocellulose to 2,3-dialdehyde cellulose followed by sulfonation using bisulfite. The physicochemical properties of the sulfonated beads, i.e., high surface area, high degree of oxidation, spherical shape, and the possibility of tailoring the porosity, make them interesting candidates for the development of immunosorbent platforms, including their application in extracorporeal blood treatments. A desired property for materials used in such applications is blood compatibility; therefore in the present work, we investigate the hemocompatibility of the sulfonated cellulose beads using an in vitro whole blood model. Complement system activation (C3a and sC5b-9 levels), coagulation activation (thrombin-antithrombin (TAT) levels) and hemolysis were evaluated after whole blood contact with the sulfonated beads and the results were compared with the values obtained with the unmodified Cladophora nanocellulose. Results showed that neither of the cellulosic materials presented hemolytic activity. A marked decrease in TAT levels was observed after blood contact with the sulfonated beads, compared with Cladophora nanocellulose. However, the chemical modification did not promote an improvement in Cladophora nanocellulose hemocompatibility in terms of complement system activation. Even though the sulfonated beads presented a significant reduction in pro-coagulant activity compared with the unmodified material, further modification strategies need to be investigated to control the complement activation by the cellulosic materials.

A Modified In Situ Method to Determine Release from a Complex Drug Carrier in Particle-Rich Suspensions.

Effective and compound-sparing methods to evaluate promising drug delivery systems are a prerequisite for successful selection of formulations in early development stages. The aim of the study was to develop a small-scale in situ method to determine drug release and supersaturation in highly concentrated suspensions of enabling formulations. Mesoporous magnesium carbonate (MMC), which delivers the drug in an amorphous form, was selected as a drug carrier. Five model compounds were loaded into the MMC at a 1:10 ratio using a solvent evaporation technique. The µDiss Profiler was used to study the drug release from MMC in fasted-state simulated intestinal fluid. To avoid extensive light scattering previously seen in particle-rich suspensions in the µDiss Profiler, an in-house-designed protective nylon filter was placed on the in situ UV probes. Three types of release experiments were conducted for each compound: micronized crystalline drug with MMC present, drug-loaded MMC, and drug-loaded MMC with 0.01% w/w hydroxypropyl methyl cellulose. The nylon filters effectively diminished interference with the UV absorption; however, the release profiles obtained were heavily compound dependent. For one of the compounds, changes in the UV spectra were detected during the release from the MMC, and these were consistent with degradation of the compound. To conclude, the addition of protective nylon filters to the probes of the µDiss Profiler is a useful contribution to the method, making evaluations of particle-rich suspensions feasible. The method is a valuable addition to the current ones, allowing for fast and effective evaluation of advanced drug delivery systems.

An All-Organic Proton Battery.

Rechargeable batteries that use organic matter as the capacity-carrying material have previously been considered a technology for the future. Earlier batteries in which both the anode and cathode consisted of organic material required significant amounts of conductive additives and were often based on metal-ion electrolytes containing Li+ or Na+. However, we have used conducting poly(3,4-ethylenedioxythiophene) (PEDOT), functionalized with anthraquinone (PEDOT-AQ) or benzonquinone (PEDOT-BQ) pendant groups as the negative and positive electrode materials, respectively, to make an all-organic proton battery devoid of metals. The electrolyte consists of a proton donor and acceptor slurry containing substituted pyridinium triflates and the corresponding pyridine base. This slurry allows the 2e-/2H+ quinone/hydroquinone redox reactions while suppressing proton reduction in the battery cell. By using strong (acidic) proton donors, the formal potential of the quinone redox reactions is tuned into the potential region in which the PEDOT backbone is conductive, thus eliminating the need for conducting additives. In this all-organic proton battery cell, PEDOT-AQ and PEDOT-BQ deliver 103 and 120 mAh g-1, which correspond to 78% and 75%, respectively, of the theoretical specific capacity of the materials at an average cell potential of 0.5 V. We show that PEDOT-BQ determines the cycling stability of the device while PEDOT-AQ provides excellent reversibility for at least 1000 cycles. This proof-of-concept shows the feasibility of assembling all-organic proton batteries which require no conductive additives and also reveals where the challenges and opportunities lie on the path to producing plastic batteries.

Synthesis and characterization of poly-3-((2,5-hydroquinone)vinyl)-1H-pyrrole: investigation on backbone/pendant interactions in a conducting redox polymer.

We herein report the synthesis and electrochemical characterization of poly-3-((2,5-hydroquinone)vinyl)-1H-pyrrole, consisting of a polypyrrole backbone derivatized at the beta position by a vinyl-hydroquinone pendant group. The structure of the polymer was characterized by solid state NMR spectroscopy. The interactions between the polypyrrole backbone and the oxidized quinone or reduced hydroquinone pendant groups are probed by several in situ methods. In situ attenuated total reflectance-Fourier transform infrared spectroscopy shows a spectroscopic response from both the doping of the polymer backbone and the redox activity of the pendant groups. Using an in situ Electrochemical Quartz Crystal Microbalance we reveal that the polymer doping is unaffected by the pendant group redox chemistry, as opposed to previous reports. Despite the continuous doping the electrochemical conversion from the hydroquinone state to the quinone state results in a significant conductance drop, as observed by in situ conductivity measurements using an Interdigitated Array electrode set-up. Twisting of the conducting polymer backbone as a result of a decreased separation between pendant groups due to π-π stacking in the oxidized state is suggested as the cause of this conductance drop.

Conducting redox polymers with non-activated charge transport properties.

Non-activated charge transport has been demonstrated in terephthalate-functionalized conducting redox polymers. The transition from a temperature-activated conduction mechanism to a residual scattering mechanism was dependent on the doping level. The latter mechanism is associated with apparent negative activation barriers to charge transport and is generally found in polymer materials with a high degree of order. Crystallographic data, however, suggested a low degree of order in this polymer, indicating the existence of interconnected crystal domains in the predominantly amorphous polymer matrix through which the charge was transported. We have thus shown that the addition of bulky pendant groups to conducting polymers does not prevent efficient charge transport via the residual scattering mechanism with low barriers to charge transport.

Assessing the electrochemical properties of polypyridine and polythiophene for prospective applications in sustainable organic batteries.

Conducting polymers are being considered promising candidates for sustainable organic batteries mainly due to their fast electron transport properties and high recyclability. In this work, the key properties of polythiophene and polypyridine have been assessed through a combined theoretical and experimental study focusing on such applications. A theoretical protocol has been developed to calculate redox potentials in solution within the framework of the density functional theory and using continuous solvation models. Here, the evolution of the electrochemical properties of solvated oligomers as a function of the length of the chain is analyzed and then the polymer properties are estimated via linear regressions using ordinary least square. The predicted values were verified against our electrochemical experiments. This protocol can now be employed to screen a large database of compounds in order to identify organic electrodes with superior properties.