Mapping spatial organization and genetic cell-state regulators to target immune evasion in ovarian cancer.

The drivers of immune evasion are not entirely clear, limiting the success of cancer immunotherapies. Here we applied single-cell spatial and perturbational transcriptomics to delineate immune evasion in high-grade serous tubo-ovarian cancer. To this end, we first mapped the spatial organization of high-grade serous tubo-ovarian cancer by profiling more than 2.5 million cells in situ in 130 tumors from 94 patients. This revealed a malignant cell state that reflects tumor genetics and is predictive of T cell and natural killer cell infiltration levels and response to immune checkpoint blockade. We then performed Perturb-seq screens and identified genetic perturbations-including knockout of PTPN1 and ACTR8-that trigger this malignant cell state. Finally, we show that these perturbations, as well as a PTPN1/PTPN2 inhibitor, sensitize ovarian cancer cells to T cell and natural killer cell cytotoxicity, as predicted. This study thus identifies ways to study and target immune evasion by linking genetic variation, cell-state regulators and spatial biology.

Flat-surface-assisted and self-regulated oxidation resistance of Cu(111).

Oxidation can deteriorate the properties of copper that are critical for its use, particularly in the semiconductor industry and electro-optics applications1-7. This has prompted numerous studies exploring copper oxidation and possible passivation strategies8. In situ observations have, for example, shown that oxidation involves stepped surfaces: Cu2O growth occurs on flat surfaces as a result of Cu adatoms detaching from steps and diffusing across terraces9-11. But even though this mechanism explains why single-crystalline copper is more resistant to oxidation than polycrystalline copper, the fact that flat copper surfaces can be free of oxidation has not been explored further. Here we report the fabrication of copper thin films that are semi-permanently oxidation resistant because they consist of flat surfaces with only occasional mono-atomic steps. First-principles calculations confirm that mono-atomic step edges are as impervious to oxygen as flat surfaces and that surface adsorption of O atoms is suppressed once an oxygen face-centred cubic (fcc) surface site coverage of 50% has been reached. These combined effects explain the exceptional oxidation resistance of ultraflat Cu surfaces.

Investigating chiral morphogenesis of gold using generative cellular automata.

Homochirality is an important feature in biological systems and occurs even in inorganic nanoparticles. However, the mechanism of chirality formation and the key steps during growth are not fully understood. Here we identify two distinguishable pathways from achiral to chiral morphologies in gold nanoparticles by training an artificial neural network of cellular automata according to experimental results. We find that the chirality is initially determined by the nature of the asymmetric growth along the boundaries of enantiomeric high-index planes. The deep learning-based interpretation of chiral morphogenesis provides a theoretical understanding but also allows us to predict an unprecedented crossover pathway and the resulting morphology.

Dimensionality Engineering of Magnetic Anisotropy from the Anomalous Hall Effect in Synthetic SrRuO3 Crystals.

Magnetic anisotropy in atomically thin correlated heterostructures is essential for exploring quantum magnetic phases for next-generation spintronics. Whereas previous studies have mostly focused on van der Waals systems, here we investigate the impact of dimensionality of epitaxially grown correlated oxides down to the monolayer limit on structural, magnetic, and orbital anisotropies. By designing oxide superlattices with a correlated ferromagnetic SrRuO3 and nonmagnetic SrTiO3 layers, we observed modulated ferromagnetic behavior with the change of the SrRuO3 thickness. Especially, for three-unit-cell-thick layers, we observe a significant 1500% improvement of the coercive field in the anomalous Hall effect, which cannot be solely attributed to the dimensional crossover in ferromagnetism. The atomic-scale heterostructures further reveal the systematic modulation of anisotropy for the lattice structure and orbital hybridization, explaining the enhanced magnetic anisotropy. Our findings provide valuable insights into engineering the anisotropic hybridization of synthetic magnetic crystals, offering a tunable spin order for various applications.

Effect of tryptophan position and lysine/arginine substitution in antimicrobial peptides on antifungal action.

Every year, the overprescription, misuse, and improper disposal of antibiotics have led to the rampant development of drug-resistant pathogens and, in turn, a significant increase in the number of patients who die of drug-resistant fungal infections. Recently, researchers have begun investigating the use of antimicrobial peptides (AMPs) as next-generation antifungal agents to inhibit the growth of drug-resistant fungi. The antifungal activity of alpha-helical peptides designed using the cationic amino acids containing lysine and arginine and the hydrophobic amino acids containing isoleucine and tryptophan were evaluated using 10 yeast and mold fungi. Among these peptides, WIK-14, which is composed of a 14-mer with tryptophan sequences at the amino terminus, showed the best antifungal activity via transient pore formation and ROS generation. In addition, the in vivo antifungal effects of WIK-14 were investigated in a mouse model infected with drug-resistant Candida albicans. The results demonstrate the potential of AMPs as antifungal agents.

Universal Platform for Robust Dual-Atom Doped 2D Catalysts with Superior Hydrogen Evolution in Wide pH Media.

Layered 2D transition metal dichalcogenides (TMDs) have been suggested as efficient substitutes for Pt-group metal electrocatalysts in the hydrogen evolution reaction (HER). However, poor catalytic activities in neutral and alkaline electrolytes considerably hinder their practical applications. Furthermore, the weak adhesion between TMDs and electrodes often impedes long-term durability and thus requires a binder. Here, a universal platform is reported for robust dual-atom doped 2D electrocatalysts with superior HER performance over a wide pH range media. V:Co-ReS2 on a wafer scale is directly grown on oxidized Ti foil by a liquid-phase precursor-assisted approach and subsequently used as highly efficient electrocatalysts. The catalytic performance surpasses that of Pt group metals in a high current regime (≥ 100 mA cm-2) at pH ≥ 7, with a high durability of more than 70 h in all media at 200 mA cm-2. First-principles calculations reveal that V:Co dual doping in ReS2 significantly reduces the water dissociation barrier and simultaneously enables the material to achieve the thermoneutral Gibbs free energy for hydrogen adsorption.

Comparative analysis of child injuries in passenger vehicles and school buses: a multicentre cross-sectional study.

OBJECTIVE: This study investigated the differences in injury profiles and safety device effectiveness among children with road traffic injuries (RTIs) involving passenger vehicles and school buses. METHODS: Using data from the Emergency Department-based Injury In-depth Surveillance database, this multicentre cross-sectional study investigated the injury profiles of 14 669 children aged 12 years old and younger who experienced RTIs from 2011-2021. Demographic factors, injury distribution, severity and effect of safety device use between RITs involving passenger vehicles and school buses were compared. RESULTS: RTIs in children most frequently occurred between 12:00 and 18:00 hours (46.9%). School bus-related RTIs peaked during school commute hours, that is, from 06:00 to 12:00 hours, and were associated with a higher prevalence of head (63.1% vs 58.9%, p<0.05) and extremity injuries (upper extremity: 8.0% vs 6.4% and lower extremity: 11.1% vs 7.6 %, p<0.05) compared with those involving passenger vehicles. However, passenger vehicle crashes showed higher proportions of neck and chest injuries, along with injuries requiring hospitalisation and intensive care. Safety devices exhibited preventive effects against head and lower extremity injuries in both vehicle types. While safety devices showed effective in reducing hospital admissions and severe injuries in passenger vehicles, their effectiveness in school buses was not observed. CONCLUSION: This study highlights the different epidemiology and injury profiles of RTIs among children involving passenger vehicles and school buses. Improved safety devices, particularly in school buses, are necessary to ensure the comprehensive protection of child passengers and reduce the risk of severe injuries during road traffic incidents.

13-Week Repeated Oral Toxicity and Toxicokinetic Studies of Rabeprazole Sodium and Sodium Bicarbonate Combination in Dogs.

The subchronic toxicity and toxicokinetics of a combination of rabeprazole sodium and sodium bicarbonate were investigated in dogs by daily oral administration for 13 consecutive weeks with a 4-week recovery period. The dose groups consisted of control (vehicles), (5 + 200), (10 + 400), and (20 + 800) mg/kg of rabeprazole sodium + sodium bicarbonate, 20 mg/kg of rabeprazole sodium only, and 800 mg/kg of sodium bicarbonate only. Esophageal ulceration accompanied by inflammation was observed in only one animal in the male (20 + 800) mg/kg rabeprazole sodium + sodium bicarbonate group. However, the severity of the ulceration was moderate, and the site of occurrence was focally extensive; thus, it was assumed to be a treatment-related effect of rabeprazole sodium + sodium bicarbonate. In the toxicokinetics component of this study, systemic exposure to rabeprazole sodium (AUClast and Cmax at Day 91) was greater in males than females, suggesting sex differences. AUClast and Cmax at Day 91 were increased compared to those on Day 1 in a dose-dependent manner. A delayed Tmax and no drug accumulation were observed after repeated dosage. In conclusion, we suggest under the conditions of this study that the no-observed-adverse-effect level (NOAEL) of the combination of rabeprazole sodium + sodium bicarbonate in male and female dogs is (10 + 400) and (20 + 800) mg/kg, respectively.

Effects of structural changes on antibacterial activity and cytotoxicity due to proline substitutions in chimeric peptide HnMc.

Owing to the rapidly increasing emergence of multidrug-resistant pathogens, antimicrobial peptides (AMPs) are being explored as next-generation antibiotics. However, AMPs present in nature are highly toxic and exhibit low antibacterial activity. Simple modifications, such as amino acid substitution, can enhance antimicrobial activity and cell selectivity. Herein, we show that HnMc-W, substituted by the Phe1Trp analog of HnMc, a chimeric peptide, resulted in membranolytic antibacterial action and enhanced salt tolerance, whereas HnMc-WP1 with one Ser9Pro substitution resulted in a proline-kink helical structure that increased salt-tolerant antibacterial effects and reduced cytotoxicity. In addition, the HnMc-WP2 peptide, designed with a PXXP motif, had a flexible central hinge in its α-helical structure due to the introduction of two Pro and two Gln (X positions, by deletion of two Gln at positions 16 and 17) residues instead of Ser at position. HnMc-WP2 exhibited excellent antibacterial effects without cytotoxicity in vitro. Moreover, its potent antibacterial activity was demonstrated in a drug-resistant Pseudomonas aeruginosa-infected mouse model in vivo. Our findings provide valuable information for the design of peptides with high antibacterial activity and cell selectivity.

Thermo-Responsive Nanocomposite Bioink with Growth-Factor Holding and its Application to Bone Regeneration.

Three-dimensional (3D) bioprinting, which is being increasingly used in tissue engineering, requires bioinks with tunable mechanical properties, biological activities, and mechanical strength for in vivo implantation. Herein, a growth-factor-holding poly(organophosphazene)-based thermo-responsive nanocomposite (TNC) bioink system is developed. The mechanical properties of the TNC bioink are easily controlled within a moderate temperature range (5-37 °C). During printing, the mechanical properties of the TNC bioink, which determine the 3D printing resolution, can be tuned by varying the temperature (15-30 °C). After printing, TNC bioink scaffolds exhibit maximum stiffness at 37 °C. Additionally, because of its shear-thinning and self-healing properties, TNC bioinks can be extruded smoothly, demonstrating good printing outcomes. TNC bioink loaded with bone morphogenetic protein-2 (BMP-2) and transforming growth factor-beta1 (TGF-ß1), key growth factors for osteogenesis, is used to print a scaffold that can stimulate biological activity. A biological scaffold printed using TNC bioink loaded with both growth factors and implanted on a rat calvarial defect model reveals significantly improved bone regenerative effects. The TNC bioink system is a promising next-generation bioink platform because its mechanical properties can be tuned easily for high-resolution 3D bioprinting with long-term stability and its growth-factor holding capability has strong clinical applicability.

Transplantation and enrichment of busulfan-resistant primordial germ cells into adult testes for efficient production of germline chimeras in songbirds†.

Zebra finch is a unique model for behavioral, neural, and genomic studies of vocal learning. Several transgenic zebra finches have been produced, although the germline transmission efficiencies are reportedly low. Recently, there have been attempts to produce germline chimeras using primordial germ cells (PGCs). However, this has been hampered by difficulties associated with the manipulation of the small eggs and the fact that the zebra finch is an altricial species that requires parental care after birth, unlike precocial chickens. Consequently, it is difficult to transplant PGCs into embryos and maintain the chimeras. Here, we developed a busulfan-mediated system for transplantation of PGCs into adult testes, to produce germline chimeras with an improved germline transmission capacity. We established microsomal glutathione-S-transferase II (MGSTII)-overexpressing PGCs that are resistant to busulfan, which induces germ cell-specific cytotoxicity, and transplanted them into testes rendered temporarily infertile by busulfan. The recipients were given a second dose of busulfan to deplete endogenous germ cells and enrich the transplanted cells, and donor cell-derived spermatogenesis was accomplished. This method requires fewer recipients due to higher survival rates, and there is no need to wait for maturation of the founders, which is required when transplanting PGCs into embryos. These results are expected to improve transgenic zebra finch production.

Analysis of the dislocation activity of Mg-Zn-Y alloy using synchrotron radiation under tensile loading.

An understanding of deformation behavior and texture development is crucial for the formability improvement of Mg alloys. X-ray line profile analysis using the convolutional multiple whole profile (CMWP) fitting method allows the experimental determination of dislocation densities separately for different Burgers vectors up to a high deformation degree. A wider use of this technique still requires exploration and testing of various materials. In this regard, the reliability of the CMWP fitting method for Mg-Zn-Y alloys, in terms of the dislocation activity during tensile deformation, was verified in the present study by the combined analysis of electron backscatter diffraction (EBSD) investigation and visco-plastic self-consistent (VPSC) simulation. The predominant activity of non-basal 〈a〉 dislocation slip was revealed by CMWP analysis, and Schmid factor analysis from the EBSD results supported the higher potential of non-basal dislocation slip in comparison with basal 〈a〉 dislocation slip. Moreover, the relative slip activities obtained by the VPSC simulation also show a similar trend to those obtained from the CMWP evaluation.

Gymnodinialimonas phycosphaerae sp. nov., a phycosphere bacterium isolated from Karlodinium veneficum.

A facultative anaerobic, Gram-negative, non-motile, rod-shaped bacterial strain, designated N5T, was obtained from the phycosphere microbiota of the marine planktonic dinoflagellate, Karlodinium veneficum. Strain N5T showed growth on marine agar at 25 °C, pH 7 and 1 % (w/v) NaCl and produced a yellow colour. According to a phylogenetic study based on 16S rRNA gene sequences, strain N5T has a lineage within the genus Gymnodinialimonas. The G+C content in the genome of strain N5T is 62.9 mol% with a total length of 4 324 088 bp. The NCBI Prokaryotic Genome Annotation Pipeline revealed that the N5T genome contained 4230 protein-coding genes and 48 RNA genes, including a 5S rRNA, 16S rRNA, 23S rRNA, 42 tRNA, and three ncRNAs. Genome-based calculations (genome-to-genome distance, average nucleotide identity and DNA G+C content) clearly indicated that the isolate represents a novel species within the genus Gymnodinialimonas. The predominant fatty acids were C19 : 0 cyclo ω8c and feature 8 (comprising C18 : 1 ω6c and/or C18 : 1 ω7c). The major polar lipids were phosphatidylglycerol, phosphatidylethanolamine and phosphatidylcholine. The main respiratory quinone was Q-10. Based on its phenotypic, phylogenetic, genomic and chemotaxonomic features, strain N5T represents a novel species of the genus Gymnodinialimonas, for which the name Gymnodinialimonas phycosphaerae sp. nov. is proposed. The type strain is N5T (=KCTC 82362T=NBRC 114899T).

Catalytic ozonation of methylethylketone over porous Mn-Cu/HZSM-5.

The catalytic ozonation of methylethylketone (MEK) was performed at the room temperature (25 °C) using the synthesized Mn and Cu-loaded zeolite (ZSM-5, SiO2/Al2O3 = 80) catalysts. The ZSM-5 zeolite was used as a porous support material due to the large surface area and high capacity for adsorption of volatile organic compounds. Since Mn and Cu-loaded zeolite catalysts were effective for the catalytic ozonation of VOCs such as MEK, according to the loaded concentration of Mn and Cu, there are four types of metal loaded ZSM5 catalysts synthesized [5 wt% Mn/ZSM-5, 5 wt% Cu/ZSM-5, 5 wt% Mn-1 wt% Cu/ZSM-5 (5Mn1CuZSM), and 5 wt% Cu-1 wt% Mn/ZSM-5]. The catalytic efficiency for the removal of MEK and ozonation using the different catalysts was also studied. Based on various experimental analysis processes, the characteristics of the synthesized catalysts were explored and the removal efficiencies of MEK and O3 together with the COx concentration generated from the destruction of MEK and O3 were explored. The results for the decomposition of MEK and O3 at the room temperature indicated that the Mn dominant ZSM-5 catalysts showed better efficiency for the conversion of MEK and O3. The 5 wt% Mn/ZSM-5 outweighed the rest of them for the removal of MEK while the 5Mn1CuZSM showed the best catalytic reactivity for the conversion of O3 and the CO2 selectivity. It was ascertained that during the reaction time of catalyst and reactants of 120 min the Mn dominantly deposited bimetallic catalyst, 5Mn1CuZSM, was determined as the most effective for the removal of MEK and O3 due to the high capability of production of Mn3+ species and more available adsorbed oxygen sites compared to the other catalysts. Finally, the durability measurement for the 5Mn1CuZSM catalyst was performed together with the produced CO and CO2 concentration for 420 min.

Catalytic removal of 2-butanone with ozone over porous spent fluid catalytic cracking catalyst.

To remove harmful volatile organic compounds (VOCs) including 2-butanone (methyl ethyl ketone, MEK) emitted from various industrial plants is very important for the clean air. Also, it is worthwhile to recycle porous spent fluid catalytic cracking (SFCC) catalysts from various petroleum refineries in terms of reducing industrial waste and the reuse of discharged resources. Therefore, Mn and Mn-Cu added SFCC (Mn/SFCC and Mn-Cu/SFCC) catalysts were prepared to compare their catalytic efficiencies together with the SFCC catalyst in the ozonation of 2-butanone. Since the SFCC-based catalysts have a structure similar to that of zeolite Y (Y), the Mn-loaded zeolite Y catalyst (Mn/Y) was also prepared to compare its activity for the removal of 2-butanone and ozone to that of the SFCC-based ones at room temperature. Among the five catalysts of this study (Y, Mn/Y, SFCC, Mn/SFCC, and Mn-Cu/SFCC), the Mn-Cu/SFCC and Mn/SFCC catalysts showed the better catalytic decomposition activity than the others. The increased distributions of the Mn3+ species and the Ovacancy sites in Mn/SFCC and Mn-Cu/SFCC catalysts which could supply more available active sites for the 2-butanone and ozone removal would enhance the catalytic activity of them.

Decompression Technique Using Subcutaneous Angiocatheter Insertion to Relieve Extensive Subcutaneous Emphysema: A Case Report.

BACKGROUND: Trauma, pneumothorax, complication of surgery, infection, or malignancy can cause subcutaneous emphysema and although most subcutaneous emphysema cases are self-limited, extensive subcutaneous emphysema can lead to a compromised airway and cardiovascular system. In this report, we described a successful treatment strategy in which subcutaneous angiocatheter insertion was used to relieve the pressure of extensive subcutaneous emphysema. CASE REPORT: An 83-year-old man was received at the emergency department (ED) for recurrent pneumothorax and extensive subcutaneous emphysema. Six 18-gauge angiocatheters were inserted under the thoracic subcutaneous tissue and a noticeable improvement was seen 3 h after angiocatheter insertion. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: Subcutaneous angiocatheter insertion may be a safe and uncomplicated decompression technique to relieve extensive subcutaneous emphysema, particularly in the ED.

RSS Model Improvement Considering Road Conditions for the Application of a Variable Focus Function Camera.

The automobile industry has developed dramatically in recent years, the supply of vehicles has also increased, and thus it has become deeply established in everyday life. Recently, as the supply of vehicles with autonomous driving functions increases, the safety of vehicles is also an emerging issue. Various car-following models for the safe driving of vehicles have long been studied by various people, and recently, a Responsibility-Sensitive Safety (RSS) model has been proposed by Mobileye. However, in existing car-following models or the RSS model, the safe distance between vehicles is presented using only vehicle speed and acceleration information, so there is a limitation in that it cannot respond to changes in road conditions due to the weather. In this paper, in order to ensure safety when the RSS model is applied to a variable focus function camera, an improved RSS model is presented in consideration of the changes in road conditions due to changes in weather, and a safety distance is derived based on the proposed model.

Encapsulation of Clofazimine by Cyclodextran: Preparation, Characterization, and In Vitro Release Properties.

This study aimed to evaluate and compare the efficacy of cyclodextrans (CIs) and cyclodextrins (CDs) in improving the water solubility of a poorly water-soluble drug, clofazimine (CFZ). Among the evaluated CIs and CDs, CI-9 exhibited the highest percentage of drug inclusion and the highest solubility. Additionally, CI-9 showed the highest encapsulation efficiency, with a CFZ:CI-9 molar ratio of 0.2:1. SEM analysis indicated successful formation of inclusion complexes CFZ/CI and CFZ/CD, accounting for the rapid dissolution rate of the inclusion complex. Moreover, CFZ in CFZ/CI-9 demonstrated the highest drug release ratio, reaching up to 97%. CFZ/CI complexes were found to be an effective means of protecting the activity of CFZ against various environmental stresses, particularly UV irradiation, compared to free CFZ and CFZ/CD complexes. Overall, the findings provide valuable insights into designing novel drug delivery systems based on the inclusion complexes of CIs and CDs. However, further studies are needed to investigate the effects of these factors on the release properties and pharmacokinetics of encapsulated drugs in vivo, in order to ensure the safety and efficacy of these inclusion complexes. In conclusion, CI-9 is a promising candidate for drug delivery systems, and CFZ/CI complexes could be a potential formulation strategy for the development of stable and effective drug products.

Torilis japonica Extract Suppresses the Induction of Atopic Inflammation.

As one of the major intractable allergic disorders, atopic inflammation is commonly accompanied by itching, dry skin, and inflammation. Atopic inflammation deteriorates the quality of life and has no fundamental cure, so it is crucial to urgently explore and develop natural resources for long-term treatment without any side effects. This study aimed to verify Torilis japonica extract (TJE)'s relieving effect and mechanism against atopic inflammation using skin cells and skin equivalent models, as well as to investigate torilin's effect (obtained from TJE) and other unknown components as marker compounds. Torilin concentration was verified in TJE using high-performance liquid chromatography and analyzed the unknown components using nuclear magnetic resonance spectroscopy. Furthermore, TJE's cytotoxicity, regenerative effect, and cell cycle regulation effects were confirmed using skin cells with atopic inflammation (human dermal fibroblasts and HaCaT keratinocytes) by using TNF-α and IFN-γ treatments. Consequently, TJE was demonstrated to regulate TARC and CTACK expressions as chemokines and those of interleukin-4, -5, and -13 as cytokines related to atopic inflammation. TJE was further confirmed to affect the matrix metalloproteinase-1, -2, and -9 expressions, which are essential in skin damage. Lastly, this study confirmed TJE's relieving effect against atopic inflammation through a 3D skin model and RhCE model using human dermal fibroblasts and HaCaT keratinocytes. These findings on atopic inflammation verified torilin's relieving effects and TJE's other components.

Chemically Stable Low-Dimensional Electrides in Transition Metal-Rich Monochalcogenides: Theoretical and Experimental Explorations.

Electrides, which are ionic crystals composed of excess anionic electrons, are of great interest as an exotic material for fundamental research and practical applications in broad fields of science and technology. However, an inherent chemical instability under ambient conditions at room temperature has been a fatal drawback to be addressed. Here, we report that transition metal-rich monochalcogenides are an emerging class of low-dimensional electrides with excellent chemical and thermal stability in air and water at room temperature through a comprehensive exploration of theoretical prediction and experimental verification. We predict new two-dimensional (2D) electrides crystallized in hexagonal P3̅m1 and P63/mmc structures with strong localization of anionic electrons in a dumbbell shape at the tetrahedral cavity of the interlayer space, which are distinct from the anionic electrons localized at the octahedral cavity in the hexagonal R3̅m structure of the previous 2D [Ca2N]+·e- and [Y2C]2+·2e- electrides. We successfully synthesized the room-temperature stable [Ti2O]2+·2e-, [Ti2S]2+·2e-, [Zr2S]2+·2e-, and primary solid solution [Hf2SxSe1-x]2+·2e- electrides, showing no structural degradation in air and water. Among them, we found that the synthesized [Ti2S]2+·2e- and [Zr2S]2+·2e- electrides are crystallized in orthorhombic symmetry (Pnnm), showing the feature of a one-dimensional (1D) electride with an anionic electron chain, which has never been reported yet. In addition to the successful finding of new 1D and 2D electrides, we discuss the self-passivation effect-driven chemical stability and the role of anionic electrons in determining the physical properties of the newly discovered electrides.