Fully reconfigurable MEMS-based second-order coupled-resonator optical waveguide (CROW) with ultra-low tuning energy.

Integrated microring resonators are well suited for wavelength-filtering applications in optical signal processing, and cascaded microring resonators allow flexible filter design in coupled-resonator optical waveguide (CROW) configurations. However, the implementation of high-order cascaded microring resonators with high extinction ratios (ERs) remains challenging owing to stringent fabrication requirements and the need for precise resonator tunability. We present a fully integrated on-chip second-order CROW filter using silicon photonic microelectromechanical systems (MEMS) to adjust tunable directional couplers and a phase shifter using nanoscale mechanical out-of-plane waveguide displacement. The filter can be fully reconfigured with regard to both the ER and center wavelength. We experimentally demonstrated an ER exceeding 25 dB and continuous wavelength tuning across the full free spectral range of 0.123 nm for single microring resonator, and showed reconfigurability in second-order CROW by tuning the ER and resonant wavelength. The tuning energy for an individual silicon photonic MEMS phase shifter or tunable coupler is less than 22 pJ with sub-microwatt static power consumption, which is far better than conventional integrated phase shifters based on other physical modulation mechanisms.

Programmable MZI based on a silicon photonic MEMS-tunable delay line.

We report on a scalable and programmable integrated Mach-Zehnder interferometer (MZI) with a tunable free spectral range (FSR) and extinction ratio (ER). For the tunable path of the MZI, we designed and utilized a tunable delay line having high flexibility based on silicon photonic microelectromechanical systems (MEMS). By utilizing MEMS, the length of the delay line can be geometrically modified. In this way, there is no optical loss penalty other than the waveguide propagation loss as the number of tunable steps increases. Therefore, our device is more scalable in terms of optical loss than the previous approaches based on cascaded MZIs. In addition, the tuning energy required to reconfigure the length is only 8.46 pJ.

Coherent terahertz wireless communication using dual-parallel MZM-based silicon photonic integrated circuits.

Coherent terahertz (THz) wireless communication using silicon photonics technology provides critical solutions for achieving high-capacity wireless transmission beyond 5G and 6G networks and seamless connectivity with fiber-based backbone networks. However, high-quality THz signal generation and noise-robust signal detection remain challenging owing to the presence of inter-channel crosstalk and additive noise in THz wireless environments. Here, we report coherent THz wireless communication using a silicon photonic integrated circuit that includes a dual-parallel Mach-Zehnder modulator (MZM) and advanced digital signal processing (DSP). The structure and fabrication of the dual-parallel MZM-based silicon photonic integrated circuit are systematically optimized using the figure of merit (FOM) method to improve the modulation efficiency while reducing the overall optical loss. The advanced DSP compensates for in-phase and quadrature (IQ) imbalance as well as phase noise by orthogonally decoupling the IQ components in the frequency domain after adaptive signal equalization and carrier phase estimation. The experimental results show a reduction in phase noise that induces degradation of transmission performance, successfully demonstrating error-free 1-m THz wireless transmission with bit-error rates of 10-6 or less at a data rate of 50 Gbps.

Self-Assembled Bimetallic Aluminum-Salen Catalyst for the Cyclic Carbonates Synthesis.

Bimetallic bis-urea functionalized salen-aluminum catalysts have been developed for cyclic carbonate synthesis from epoxides and CO2. The urea moiety provides a bimetallic scaffold through hydrogen bonding, which expedites the cyclic carbonate formation reaction under mild reaction conditions. The turnover frequency (TOF) of the bis-urea salen Al catalyst is three times higher than that of a µ-oxo-bridged catalyst, and 13 times higher than that of a monomeric salen aluminum catalyst. The bimetallic reaction pathway is suggested based on urea additive studies and kinetic studies. Additionally, the X-ray crystal structure of a bis-urea salen Ni complex supports the self-assembly of the bis-urea salen metal complex through hydrogen bonding.

Lateral silicon photonic grating-to-fiber coupling with angle-polished silica waveguide blocks.

We demonstrate a lateral, planar fiber-to-waveguide coupling strategy for photonic integrated circuits with diffraction grating couplers using angle-polished silica waveguide blocks fabricated with well-established planar lightwave circuit technologies. Compared to the conventional lateral coupling scheme with angle-polished fibers, the demonstrated scheme can significantly decrease the diverging distance between the reflective angle-polished facet and the grating couplers, and thereby maintains the overall coupling efficiency and alignment tolerances of the vertical coupling approach. The proposed method shows a small penalty in coupling efficiency (< 0.1 dB), and in-plane (out-of-plane) alignment tolerance for 1 dB excess loss is approximately 5 µm (9 µm).

Demonstration of photonics-aided terahertz wireless transmission system with using silicon photonics circuit: erratum.

We present an erratum for our recent paper [Opt. Express 28, 23397 (2020)] to include funding information in the funding section.

Demonstration of photonics-aided terahertz wireless transmission system with using silicon photonics circuit.

We experimentally demonstrate the use of silicon photonics circuit (SPC) in the simple and cost-effective photonics-aided Terahertz (THz) wireless transmission system. We perform theoretical investigation (with experimental confirmation) to understand that the system performance is more sensitive to the free space path loss (FSPL) at the THz wireless link than the SPC's insertion loss. The SPC, we design and fabricate, combines two incident optical carriers at different wavelengths and modulates one of two optical carriers with data to transfer, consequently reducing the system footprint that is indeed one of the key challenges that must be tackled for better practicability of the THz communication system. We perform experimental verification to show the feasibility of 40 Gb/s non-return-to-zero (NRZ) on-off-keying (OOK) signal transmission over 1.4 m wireless link for possibly its application in short-reach indoor wireless communication systems utilizing (sub-)THz frequency band such as, e.g., indoor WiFi, distributed antenna/radio systems, rack-to-rack data delivery, etc. The SPC could be further integrated with various photonic elements such as semiconductor optical amplifiers, laser diodes, and photo-mixers, which will enable the path towards all-photonic THz-wave synthesizers.

First-principles exploration of oxygen vacancy impact on electronic and optical properties of ABO3-δ (A = La, Sr; B = Cr, Mn) perovskites.

ABO3-δ perovskites are utilized in many applications including optical gas sensing for energy systems. Understanding the opto-electronic properties allows rational selection of the perovskite-based sensors from a diverse family of ABO3-δ perovskites, associated with the choices of A and B cations and range of oxygen concentrations. Herein, we assess the impact of oxygen vacancies on the electronic structure and optical response of pristine and oxygen-vacant ABO3-δ (A = La, Sr; B = Cr, Mn) perovskites via first-principles calculations. The endothermic formation energy for oxygen vacancies shows that the generation of ABO3-δ defect structures is thermodynamically possible. LaCrO3 and LaMnO3 have direct and indirect ground-state band gaps, respectively, whereas SrCrO3 and SrMnO3 are metallic. In the presence of an oxygen mono-vacancy, however, the band gap decreases in LaCrO3-δ and vanishes in LaMnO3-δ. In contrast to the decrease in the band gaps, the oxygen vacancies in ABO3-δ are found to increase optical absorption in the visible to near-infrared wavelength regime, and thus lower the onset energy of absorption compared with the pristine materials. Our assessments emphasize the role of the oxygen vacancy, or other possible oxygen non-stoichiometry defects, in perovskite oxides with respect to the opto-electronic performance parameters that are of interest for optical gas sensors for energy generation process environments.

Impact of intrinsic framework flexibility for selective adsorption of sarin in non-aqueous solvents using metal-organic frameworks.

Molecular modeling of mixture adsorption in nanoporous materials can provide insight into the molecular-level details that underlie adsorptive separations. Modeling of adsorption often employs a rigid framework approximation for computational convenience. All real materials, however, have intrinsic flexibility due to thermal vibrations of their atoms. In this article, we examine quantitative predictions of the adsorption selectivity for a dilute concentration of a chemical warfare agent, sarin, from bulk mixtures with aqueous and non-aqueous (methanol, isopropyl alcohol) solvents using metal-organic frameworks (MOFs). These predictions were made in MOFs approximated as rigid and also in MOFs allowed to have intrinsic flexibility. Including framework flexibility appears to have important consequences for quantitative predictions of adsorption selectivity, particularly for sarin/water mixtures. Our observations suggest the intrinsic flexibility of MOFs can have a nontrivial impact on adsorption modeling of molecular mixtures, especially for mixtures containing polar species and molecules of different sizes.

Enantioselective Alkynylation of Trifluoromethyl Ketones Catalyzed by Cation-Binding Salen Nickel Complexes.

Cation-binding salen nickel catalysts were developed for the enantioselective alkynylation of trifluoromethyl ketones in high yield (up to 99 %) and high enantioselectivity (up to 97 % ee). The reaction proceeds with substoichiometric quantities of base (10-20 mol % KOt-Bu) and open to air. In the case of trifluoromethyl vinyl ketones, excellent chemo-selectivity was observed, generating 1,2-addition products exclusively over 1,4-addition products. UV-vis analysis revealed the pendant oligo-ether group of the catalyst strongly binds to the potassium cation (K+ ) with 1:1 binding stoichiometry (Ka =6.6×105 m-1 ).

A Small-Molecule CD4-Mimetic Compound Protects Bone Marrow-Liver-Thymus Humanized Mice From HIV-1 Infection.

Background: Small-molecule CD4-mimetic compounds (CD4mc) inhibit human immunodeficiency virus (HIV-1) entry by blocking binding to the CD4 receptor and by premature triggering of the viral envelope glycoprotein (Env) spike. Methods: The efficacy of a CD4mc in protecting bone marrow-liver-thymus (BLT) humanized mice from vaginal HIV-1 challenge was evaluated. Results: Intravaginal application of the CD4mc JP-III-48, either before or simultaneously with virus challenge, protected BLT humanized mice from HIV-1JR-CSF infection in a dose- dependent manner. Conclusion: The direct antiviral effects of a CD4mc prevent HIV-1 infection in a murine model of sexual transmission.

CD4 mimetics sensitize HIV-1-infected cells to ADCC.

HIV-1-infected cells presenting envelope glycoproteins (Env) in the CD4-bound conformation on their surface are preferentially targeted by antibody-dependent cell-mediated cytotoxicity (ADCC). HIV-1 has evolved a sophisticated mechanism to avoid exposure of ADCC-mediating Env epitopes by down-regulating CD4 and by limiting the overall amount of Env at the cell surface. Here we report that small-molecule CD4-mimetic compounds induce the CD4-bound conformation of Env, and thereby sensitize cells infected with primary HIV-1 isolates to ADCC mediated by antibodies present in sera, cervicovaginal lavages, and breast milk from HIV-1-infected individuals. Importantly, we identified one CD4 mimetic with the capacity to sensitize endogenously infected ex vivo-amplified primary CD4 T cells to ADCC killing mediated by autologous sera and effector cells. Thus, CD4 mimetics hold the promise of therapeutic utility in preventing and controlling HIV-1 infection.

Antibody-Dependent Cellular Cytotoxicity against Reactivated HIV-1-Infected Cells.

UNLABELLED: Lifelong antiretroviral therapy (ART) for HIV-1 does not diminish the established latent reservoir. A possible cure approach is to reactivate the quiescent genome from latency and utilize immune responses to eliminate cells harboring reactivated HIV-1. It is not known whether antibodies within HIV-1-infected individuals can recognize and eliminate cells reactivated from latency through antibody-dependent cellular cytotoxicity (ADCC). We found that reactivation of HIV-1 expression in the latently infected ACH-2 cell line elicited antibody-mediated NK cell activation but did not result in antibody-mediated killing. The lack of CD4 expression on these HIV-1 envelope (Env)-expressing cells likely resulted in poor recognition of CD4-induced antibody epitopes on Env. To examine this further, cultured primary CD4(+) T cells from HIV-1(+) subjects were used as targets for ADCC. These ex vivo-expanded primary cells were modestly susceptible to ADCC mediated by autologous or heterologous HIV-1(+) serum antibodies. Importantly, ADCC mediated against these primary cells could be enhanced following incubation with a CD4-mimetic compound (JP-III-48) that exposes CD4-induced antibody epitopes on Env. Our studies suggest that with sufficient reactivation and expression of appropriate Env epitopes, primary HIV-1-infected cells can be targets for ADCC mediated by autologous serum antibodies and innate effector cells. The results of this study suggest that further investigation into the potential of ADCC to eliminate reactivated latently infected cells is warranted. IMPORTANCE: An HIV-1 cure remains elusive due to the persistence of long-lived latently infected cells. An HIV-1 cure strategy, termed "shock and kill," aims to reactivate HIV-1 expression in latently infected cells and subsequently eliminate the reactivated cells through immune-mediated killing. While recent research efforts have focused on reversing HIV-1 latency, it remains unclear whether preexisting immune responses within HIV-1(+) individuals can efficiently eliminate the reactivated cells. HIV-1-specific antibodies can potentially eliminate cells reactivated from latency via Fc effector functions by recruiting innate immune cells. Our study highlights the potential role that antibody-dependent cellular cytotoxicity might play in antilatency cure approaches.

Flexible resistive random access memory devices by using NiO x /GaN microdisk arrays fabricated on graphene films.

We report flexible resistive random access memory (ReRAM) arrays fabricated by using NiO x /GaN microdisk arrays on graphene films. The ReRAM device was created from discrete GaN microdisk arrays grown on graphene films produced by chemical vapor deposition, followed by deposition of NiO x thin layers and Au metal contacts. The microdisk ReRAM arrays were transferred to flexible plastic substrates by a simple lift-off technique. The electrical and memory characteristics of the ReRAM devices were investigated under bending conditions. Resistive switching characteristics, including cumulative probability, endurance, and retention, were measured. After 1000 bending repetitions, no significant change in the device characteristics was observed. The flexible ReRAM devices, constructed by using only inorganic materials, operated reliably at temperatures as high as 180 °C.

CD4-mimetic small molecules sensitize human immunodeficiency virus to vaccine-elicited antibodies.

UNLABELLED: Approaches to prevent human immunodeficiency virus (HIV-1) transmission are urgently needed. Difficulties in eliciting antibodies that bind conserved epitopes exposed on the unliganded conformation of the HIV-1 envelope glycoprotein (Env) trimer represent barriers to vaccine development. During HIV-1 entry, binding of the gp120 Env to the initial receptor, CD4, triggers conformational changes in Env that result in the formation and exposure of the highly conserved gp120 site for interaction with the coreceptors, CCR5 and CXCR4. The DMJ compounds (+)-DMJ-I-228 and (+)-DMJ-II-121 bind gp120 within the conserved Phe 43 cavity near the CD4-binding site, block CD4 binding, and inhibit HIV-1 infection. Here we show that the DMJ compounds sensitize primary HIV-1, including transmitted/founder viruses, to neutralization by monoclonal antibodies directed against CD4-induced (CD4i) epitopes and the V3 region, two gp120 elements involved in coreceptor binding. Importantly, the DMJ compounds rendered primary HIV-1 sensitive to neutralization by antisera elicited by immunization of rabbits with HIV-1 gp120 cores engineered to assume the CD4-bound state. Thus, small molecules like the DMJ compounds may be useful as microbicides to inhibit HIV-1 infection directly and to sensitize primary HIV-1 to neutralization by readily elicited antibodies. IMPORTANCE: Preventing HIV-1 transmission is a priority for global health. Eliciting antibodies that can neutralize many different strains of HIV-1 is difficult, creating problems for the development of a vaccine. We found that certain small-molecule compounds can sensitize HIV-1 to particular antibodies. These antibodies can be elicited in rabbits. These results suggest an approach to prevent HIV-1 sexual transmission in which a virus-sensitizing microbicide is combined with a vaccine.

A comprehensive dataset for home appliance control using ERP-based BCIs with the application of inter-subject transfer learning.

Brain-computer interfaces (BCIs) have a potential to revolutionize human-computer interaction by enabling direct links between the brain and computer systems. Recent studies are increasingly focusing on practical applications of BCIs-e.g., home appliance control just by thoughts. One of the non-invasive BCIs using electroencephalography (EEG) capitalizes on event-related potentials (ERPs) in response to target stimuli and have shown promise in controlling home appliance. In this paper, we present a comprehensive dataset of online ERP-based BCIs for controlling various home appliances in diverse stimulus presentation environments. We collected online BCI data from a total of 84 subjects among whom 60 subjects controlled three types of appliances (TV: 30, door lock: 15, and electric light: 15) with 4 functions per appliance, 14 subjects controlled a Bluetooth speaker with 6 functions via an LCD monitor, and 10 subjects controlled air conditioner with 4 functions via augmented reality (AR). Using the dataset, we aimed to address the issue of inter-subject variability in ERPs by employing the transfer learning in two different approaches. The first approach, "within-paradigm transfer learning," aimed to generalize the model within the same paradigm of stimulus presentation. The second approach, "cross-paradigm transfer learning," involved extending the model from a 4-class LCD environment to different paradigms. The results demonstrated that transfer learning can effectively enhance the generalizability of BCIs based on ERP across different subjects and environments.

Modulatory Effects of the Kuwanon-Rich Fraction from Mulberry Root Bark on the Renin-Angiotensin System.

In this study, we investigated the anti-hypertensive properties of mulberry products by modulating the renin-angiotensin system (RAS). Comparative analysis showed that the ethyl acetate fractions, particularly from the Cheongil and Daeshim cultivars, contained the highest levels of polyphenols and flavonoids, with concentrations reaching 110 mg gallic acid equivalent (GE)/g and 471 mg catechin equivalent (CE)/g of extract, respectively. The ethyl acetate fraction showed superior angiotensin-converting enzyme (ACE) inhibitory activity, mainly because of the presence of the prenylated flavonoids kuwanon G and H. UPLC/Q-TOF-MS analysis identified kuwanon G and H as the primary active components, which significantly contributed to the pharmacological efficacy of the extract. In vivo testing of mice fed a high-salt diet showed that the ethyl acetate fraction substantially reduced the heart weight and lowered the serum renin and angiotensinogen levels by 34% and 25%, respectively, highlighting its potential to modulate the RAS. These results suggested that the ethyl acetate fraction of mulberry root bark is a promising candidate for the development of natural ACE inhibitors. This finding has significant implications for the management of hypertension through RAS regulation and the promotion of cardiovascular health in the functional food industry.

Cooperative bimetallic catalysis in asymmetric transformations.

The efficient synthesis of enantioenriched compounds is becoming increasingly important in modern organic, pharmaceutical, and materials chemistry. Recently, chiral cooperative bimetallic catalysts have emerged as a powerful tool to achieve high efficiency and selectivity in asymmetric transformations. This tutorial review highlights strategies and recent advances in cooperative bimetallic catalysts which have been developed for a variety of asymmetric transformations.

Unraveling prokaryotic diversity distribution and functional pattern on nitrogen and methane cycling in the subtropical Western North Pacific Ocean.

Prokaryotes play an important role in marine nitrogen and methane cycles. However, their community changes and metabolic modifications to the concurrent impact of ocean warming (OW), acidification (OA), deoxygenation (OD), and anthropogenic­nitrogen-deposition (AND) from the surface to the deep ocean remains unknown. We examined here the amplicon sequencing approach across the surface (0-200 m; SL), intermediate (200-1000 m; IL), and deep layers (1000-2200 m; DL), and characterized the simultaneous impacts of OW, OA, OD, and AND on the Western North Pacific Ocean prokaryotic changes and their functional pattern in nitrogen and methane cycles. Results showed that SL possesses higher ammonium oxidation community/metabolic composition assumably the reason for excess nitrogen input from AND and modification of their kinetic properties to OW adaptation. Expanding OD at IL showed hypoxic conditions in the oxygen minimum layer, inducing higher microbial respiration that elevates the dimerization of nitrification genes for higher nitrous oxide production. The aerobic methane-oxidation composition was dominant in SL presumably the reason for adjustment in prokaryotic optimal temperature to OW, while anaerobic oxidation composition was dominant at IL due to the evolutionary changes coupling with higher nitrification. Our findings refocus on climate-change impacts on the open ocean ecosystem from the surface to the deep-environment integrating climate-drivers as key factors for higher nitrous-oxide and methane emissions.

Highly Reliable Flexible Device with a Charge Compensation Layer.

Flexible devices fabricated with a polyimide (PI) substrate are essential for foldable, rollable, and stretchable products and various applications. However, inherent technical challenges remain in mobile charge-induced device instabilities and image retention, significantly hindering future technologies. Here, we introduce a new barrier material, SiCOH, into the backplane of amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs) and applied it to production-level flexible panels. We found that the SiCOH layer effectively compensates for the surface charging induced by fluorine ions at the interface between the PI substrate and the barrier layer under bias stress, thereby preventing abnormal positive shifts in threshold voltage (Vth) and image disturbance. The a-IGZO TFTs and metal-insulator-metal and metal-insulator-semiconductor capacitors with a SiCOH layer demonstrate reliable device performance, Vth shifts, and capacitance changes with an increase in gate bias stress. A flexible device with SiCOH enables the suppression of abnormal Vth shifts associated with PIs and plays a vital role in image sticking. This work provides new insights into process integrity and paves the way for expediting versatile form factors.