RESUMEN
Counterfeiting of banknotes, important documents, and branded goods continues to be a major worldwide problem for governments, businesses, and consumers. This problem has serious financial, security, and health implications. Due to their stability for printing on various substrates, the photochromic anticounterfeiting inks have received important interest. There have been various photochromic agents, such as polymer nanoparticles, quantum and carbon dots, and organic and inorganic fluorophores and luminophores, which have been broadly used for antiforging applications. In comparison to organic agents, inorganic photochromic materials have better stability under reversible/long-term light illumination. Recently, the remarkable optical characteristics and chemical stability of photoluminescent and photochromic agents have led to their extensive usage anticounterfeiting products. There have been also several strategies to tackle the rising problem of counterfeiting. Both of solvent-based and water-based inks have been developed for security encoding purposes. Additionally, the printing methods, including screen printing, labeling, stamping, inkjet printing, and handwriting, that have been used to apply anticounterfeiting inks onto various surfaces are discussed. The limitations of photoluminescent and photochromic agents and the potential for their future preparation to combat counterfeiting were discussed. This review would benefit academic researchers and industrial developers who are interested in the area of security printing.
Asunto(s)
Tinta , Impresión , Procesos Fotoquímicos , Polímeros/química , LuminiscenciaRESUMEN
Smart windows with long-persistent phosphorescence, ultraviolet (UV) light protection, high transparency, and high rigidity were developed by easily immobilizing varying ratios of lanthanide-activated aluminate phosphor nanoscale particles within a composite of recycled polyester/cellulose nanocrystals (RPET/CNC). Cellulose nanocrystals were prepared from rice straw waste. Cellulose nanocrystals were used at low concentration as both crosslinker and drier to improve both transparency and hardness. The phosphor nanoscale particles must be distributed into the recycled polyester/cellulose nanocrystals composite bulk without agglomeration to produce transparent RPET/CNC substrates. Photoluminescence characteristics were also studied using spectroscopic profiles of excitation/emission and decay/lifetime. The hardness efficiency was also examined. This transparent recycled polyester waste/cellulose nanocrystals nanocomposite smart window has been shown to change colour under UV light to strong green and to greenish-yellow when it is dark, as proved by Commission Internationale de l'éclairage (CIE) laboratory colour parameters. It was found that the afterglow RPET/CNC smart window had phosphorescence intensities of 428, 493, and 523 nm upon excitation at 368 nm. There was evidence of improved UV shielding, photostability, and hydrophobic activity. In the presence of a low phosphor ratio, the luminescent RPET/CNC substrates showed quick and reversible fluorescence photochromic activity when exposed to UV radiation.
Asunto(s)
Nanocompuestos , Nanopartículas , Celulosa/química , Luminiscencia , Nanocompuestos/química , Nanopartículas/química , PoliésteresRESUMEN
Novel inorganic-organic hybrid photochromic and fluorescent ink for anticounterfeiting documents was developed using a pigment/resin ink formula enclosing a long-lived luminescent inorganic pigment with good thermal photostability. The produced ink exhibited an optimal excitation wavelength at 360 nm with an absorption colour and fluorescence changes in the printed document. To develop a transparent printed film from pigment/resin ink, the phosphorescent pigment has to be well dispersed physically without agglomeration. The pigment/resin hybrid was applied effectively onto commercial cellulose paper sheets using screen-printing technology. An homogeneous photochromic layer was deposited on cellulose paper document surface to afford a considerable greenish-yellow colour as demonstrated by CIE coloration measurements under a UV lamp, even at a pigment concentration as low as 0.1 wt% of the ink formulation. The printed paper sheets exhibited three excitation bands at 235, 274 and 378 nm and three emission bands at 416, 418 and 436 nm. Fluorescence optical microscopy, Fourier-transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and wavelength-dispersive X-ray fluorescence spectrometry of the printed paper sheet were explored. The screen-printed paper sheets displayed a reversible and fast photochromism during ultraviolet irradiation without fatigue. The rheological properties, stability, and printability of the ink were studied.
Asunto(s)
Tinta , Estroncio , Celulosa , Colorantes , LuminiscenciaRESUMEN
Smart photochromic and fluorescent products can respond to an external stimulus by changing their colour and emission spectra with light. Here, we developed a simple formulation of an organic-inorganic nanocomposite photoluminescent cellulose acetate (CA) film based on immobilization of a lanthanide-doped pigment. Strontium aluminium oxide pigment doped with Eu2+ and Dy3+ (SAOED) exhibits an optimal excitation wavelength at 365 nm. For better fabrication of the multifunctional colourless pigment-cellulose acetate composites (CA-SAOED), the lanthanide-doped colourant must be well-dispersed physically without agglomeration. The fabricated photoluminescence cellulose film exhibited an excitation peak at 436 nm and two fluorescence peaks at 494 and 524 nm. The findings revealed that the originated nanocomposite films demonstrated improved superhydrophobic activity, high ultraviolet light protection and enhanced antibacterial activity without adversely influencing its native physico-mechanical characteristics. The films demonstrated fast and reversible photochromic responsiveness without fatigue during ultraviolet light irradiation.
Asunto(s)
Antiinfecciosos , Elementos de la Serie de los Lantanoides , Nanocompuestos , Celulosa/análogos & derivados , Interacciones Hidrofóbicas e HidrofílicasRESUMEN
A facile approach for possible industrial production of long-persistent phosphorescence, continuing to emitting light for a long time period, smart cobbles were developed toward photoluminescent hard surfaces. The inorganic strontium aluminium oxide pigment doped with rare earth elements was added to a synthetic organic epoxy in the presence of polyamine as a hardener to make a phosphor-loaded viscous fluid that can then be hardened in a few minutes. The transparency of the solid cobbles can be accomplished easily using homogeneous dispersion of the phosphor in the epoxy resin fluid before the addition of a hardener to avoid pigment aggregation. This pigment-epoxy formula can be easily applied industrially onto flagstones surfaces under ambient conditions. The photoluminescent cobblestones demonstrated an optimum excitation wavelength at 366 nm and an emission band at 521 nm with a long-persistent phosphorescence cobble surface. The development of a translucent white colour under normal daylight, bright green under ultraviolet (UV) irradiation, bright white colour after 30 sec in the dark, and phosphorescent green colour after 75 min in the dark was indicated using Commission Internationale de l'Eclairage (CIE) Laboratory coloration measurements. The luminescent hard composite cobble exhibited a highly durable and reversible long-persistent phosphorescence light. Photoluminescence, morphological, and hardness properties as well as the elemental composition of the prepared cobbles were explored.
Asunto(s)
Óxido de Aluminio/química , Resinas Epoxi/química , Europio/química , Luminiscencia , Estroncio/química , Mediciones Luminiscentes , Tamaño de la Partícula , Procesos Fotoquímicos , Propiedades de SuperficieRESUMEN
The main objective of technical protective clothing is to enhance people safety at work, which may save their life or keep them healthy away against some hazards. We developed a warning cotton fabric with a traffic safety warning photoluminescence character that continues emitting light for a long period of time after the removal of the illuminant source. Rare earth-doped strontium aluminate was dispersed in an aqueous medium of a polyacrylic-based binder to give a cross-linkable photoluminescent formula to be applied onto cotton substrate employing spray-coat approach. To introduce a transparent photoluminescent film, the Rare earth pigment must be fully dispersed to prevent aggregation. The long-persistent photoluminescent layer was deposited on cotton surface employing different concentrations of the rare earth pigment phosphor. The excitation wavelength maximum band of the spray-coated film on cotton fabric was found to occur at 365 nm, while the emission was recorded at 515 nm. Yellowish-green emissive color was monitored by CIE color data under the ultraviolet excitation source. The spray-coated fabric was characterized by wavelength dispersive X-ray fluorescence (WD-XRF), phosphorescence and excitation spectra, elements mapping, scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). The comfort measurements were studied by exploring both of fabric stiffness and air-permeability. Furthermore, the spray-coated textile substrates displayed good fastness properties and a reversible luminescent glow in the dark.
RESUMEN
Ammonia is a colorless gas, yet it can be fatal if inhaled or ingested in high enough concentrations. Herein, a solid-state colorimetric smart wool (WL) sensor for ammonia was developed. Common hop (Humulus lupulus L.) is a natural resource of spectroscopical dyestuff known as xanthohumol (XN). Wool fabrics were dyed with different concentrations of xanthohumol extract using the high-temperature high-pressure method in the presence of a mordant. The coloration parameters and absorption spectra were employed to explore the yellow-to-white colorimetric shift of the wool fabric after it was exposed to aqueous ammonia. The wool fabric showed an excellent detection limit of 5 to 125 ppm. When the ammonia concentration was increased, the absorbance spectra demonstrated a hypsochromic shift from 498 nm to 367 nm. This could be attributed to changes in the molecular structure of xanthohumol that happen owing to intramolecular charge delocalization. Using transmission electron microscopy (TEM), the mordant/xanthohumol nanoparticles were measured to have diameters of 15-40 nm. The xanthohumol-finished wool fabrics showed good colorfastness properties. The incorporation of mordant/xanthohumol nanoparticles into wool fabrics showed no negative effects on their stiffness or air-permeability.
RESUMEN
Color is a major attraction component of any fabric regardless of how admirable its constitution. Industrial production and utilization of synthetic dyestuffs for textile dyeing have consequently become a gigantic industry today. Synthetic dyestuffs have introduced a broad range of colorfastness and bright hues. Nonetheless, their toxic character has become a reason of serious concern to the environment. Usage of synthetic dyestuffs has adverse impacts on all forms of life. Existence of naphthol, vat dyestuffs, nitrates, acetic acid, soaping chemicals, enzymatic substrates, chromium-based materials, and heavy metals as well as other dyeing auxiliaries, makes the textile dyeing water effluent extremely toxic. Other hazardous chemicals include formaldehyde-based color fixing auxiliaries, chlorine-based stain removers, hydrocarbon-based softeners, and other non-biodegradable dyeing auxiliaries. The colloidal material existing alongside commercial colorants and oily froth raises the turbidity resulting in bad appearance and unpleasant odor of water. Furthermore, such turbidity will block the diffusion of sunlight required for the process of photosynthesis which in turn is interfering with marine life. This effluent may also result in clogging the pores of the soil leading to loss of soil productivity. Therefore, it has been critical for innovations, environmentally friendly remediation technologies, and alternative eco-systems to be explored for textile dyeing industry. Different eco-systems have been explored such as biocolors, natural mordants, and supercritical carbon-dioxide assisted waterless dyeing. Herein, we explore the different types of dyeing processes, water consumption, pollution, treatment, and exploration of eco-systems in textile dyeing industry.