RESUMEN
We present the first experimental demonstration of coherent perfect absorption (CPA) in an integrated device using a silicon racetrack resonator at telecommunication wavelengths. Absorption in the racetrack is achieved by Si+-ion-implantation, allowing for phase controllable amplitude modulation at the resonant wavelength. The device is measured to have an extinction of 24.5 dB and a quality-factor exceeding 3000. Our results will enable integrated CPA devices for data modulation and detection.
RESUMEN
We have fabricated a waveguide integrated monolithic silicon infrared detector. The photodiode consists of a p-i-n junction across a silicon-on-insulator (SOI) rib waveguide. Absorption is due to surface-states at the silicon/air interface of the waveguide. A 2 mm long detector shows a response of 0.045 A/W (calculated as a function of coupled light) and is capable of operation at 10 Gb/s at a reverse bias voltage of 2 V.
RESUMEN
A defect-enhanced silicon photodiode and heater are integrated with and used to thermally stabilize a microring modulator. These optoelectronic components are interfaced with external control circuitry to create a closed-looped feedback system for thermally stabilizing the microring modulator. The thermal stabilization system enables the microring modulator to provide error-free 5-Gb/s modulation while being subjected to thermal fluctuations that would normally render it inoperable.
Asunto(s)
Fotometría/instrumentación , Semiconductores , Resonancia por Plasmón de Superficie/instrumentación , Telecomunicaciones/instrumentación , Diseño de Equipo , Análisis de Falla de Equipo , Retroalimentación , Miniaturización , Integración de Sistemas , TemperaturaRESUMEN
We have fabricated monolithic silicon avalanche photodiodes capable of 10 Gbps operation at a wavelength of 1550 nm. The photodiodes are entirely CMOS process compatible and comprise a p-i-n junction integrated with a silicon-on-insulator (SOI) rib waveguide. Photo-generation is initiated via the presence of deep levels in the silicon bandgap, introduced by ion implantation and modified by subsequent annealing. The devices show a small signal 3 dB bandwidth of 2.0 GHz as well as an open eye pattern at 10 Gbps. A responsivity of 4.7 ± 0.5 A/W is measured for a 600 µm device at a reverse bias of 40 V.