The Antibacterial Effect of Ciprofloxacin Loaded Calcium Carbonate (CaCO3) Nanoparticles Against the Common Bacterial Agents of Osteomyelitis.

The present study aimed to investigate the biocompatibility, antibacterial/anti-biofilm effects of ciprofloxacin-loaded calcium carbonate (Cip- loaded CaCO3) nanoparticles against the common organisms responsible for osteomyelitis. The antibacterial and biofilm inhibitory activities were studied by determination of minimum inhibitory concentrations (MICs) and minimum biofilm inhibitory concentrations (MBICs), respectively. Hemolytic effects were determined for studying hemocompatibility. The SDS-PAGE method was used to study the interaction of Cip- loaded CaCO3 with plasma proteins. The effects of Cip- loaded CaCO3 on the cell viability of human bone marrow mesenchymal stem cells (hBM-MSCs) was detected. The Cip- loaded CaCO3 nanoparticles were shown a significant antimicrobial effect at lower concentrations than free ciprofloxacin. No significant hemolytic effect was observed. The Cip- loaded CaCO3 nanoparticles have shown interaction with apolipoprotein A1 (28 kDa) and albumin (66.5 kDa). The viability of hBM-MSCs treated with Cip- loaded CaCO3 was more than 96%. Our results indicated that Cip-loaded CaCO3 nanoparticles had favorable in vitro compatibility with human red blood cells, antimicrobial effects, and low cytotoxicity.

Increased antibiofilm and growth inhibitory effect of Imipenem/Cilastatin nanoliposomes against clinical Pseudomonas aeruginosa isolates.

Numerous infections are linked to Pseudomonas aeruginosa. It is one of the major medical concerns because of virulence and antibiotic resistance. Antibiotic encapsulation in liposomes is a good strategy for controlling infections caused by this microorganism. Evaluation of anti-Pseudomonas aeruginosa effect of liposomal form of Imipenem/Cilastatin in vitro condition. By using the disk agar diffusion technique, the isolates' pattern of antibiotic resistance was identified. The antibiotic was placed into the nanoliposome after it had been made using the thin layer and ethanol injection techniques. SEM and DLS were used to determine the size, shape, and zeta potential of the encapsulated drug form and the empty nanoliposome. Additionally, Imipenem/Cilastatin encapsulation in nanoliposomes was studied using FT-IR spectroscopy. In the microbial assay experiments the MIC, MBC and MBEC of liposomal and free drug forms were determined. The nanoparticles were spherical, with a diameter ranging from 30 to 39 nm, and the EE% in the thin layer and ethanol injection procedures were 97 and 98, respectively. Imipenem/Cilastatin nanoliposomes showed peaks at 3009 cm-1 and 1650 cm-1, demonstrating the thermodynamic stability for the chemical structure of the drug enclosed and validating the encapsulation of antibiotic in the nanoliposomes. When compared to free drug forms, nanoliposomes had lower MIC and MBC values in the majority of the isolates and had a greater ability to eradicate the biofilm formation. It was shown that the two nanoliposome preparation techniques were more efficient in 80% of the isolates, which had outcomes that were consistent with those of numerous other investigations. Overall, we demonstrated that the antibacterial activity of nanoliposomes was higher than that of the free drug form based on the evaluation of their MIC and MBC. Pharmaceutical nanoliposome techniques provide an excellent future perspective on how to manage microbial infections that are resistant to antibiotics.

Multifunctional magnetic nanoparticles for MRI-guided co-delivery of erlotinib and L-asparaginase to ovarian cancer.

The use of magnetic nanoparticles (MNPs) in biomedical applications has been wildly opted due to their unique properties. Here, we designed MNPs loaded with erlotinib (ERL/SPION-Val-PEG) and conjugated them with anti-mucin16 (MUC16) aptamer to introduce new image-guided nanoparticles (NPs) for targeted drug delivery as well as non-invasive magnetic resonance imaging (MRI) contrast agents. Also, the combination of our nanosystem (NS) along with L-Asparaginase (L-ASPN) led to synergistic effects in terms of reducing cell viability in ovarian cancer cells, which could suggest a novel combination therapy. The mean size of our NS was about 63.4 ± 3.4 nm evaluated by DLS analysis and its morphology was confirmed using TEM. Moreover, the functional groups, as well as magnetic properties of our NS, were examined by FT-IR and VSM tests, respectively. The loading efficacy of erlotinib on MNPs was about 80% and its release reached 70.85% over 7 days in the pH value of 5.4. The MR images and flow cytometry results revealed that the cellular uptake of ERL/SPION-Val-PEG-MUC16 NPs in cells with MUC16 overexpression was considerably higher than unarmed NPs. In addition, T2-weight MR images of ovarian cancer-bearing mice indicated significant signal intensity changes at the tumour site 4 h after intravenous injection compared to the non-target MNPs. Our data suggest ERL/SPION-Val-PEG NPs as an image-guided co-drug delivery system for ovarian cancer.

Advances in Aptamers-Based Applications in Breast Cancer: Drug Delivery, Therapeutics, and Diagnostics.

Aptamers are synthetic single-stranded oligonucleotides (such as RNA and DNA) evolved in vitro using Systematic Evolution of Ligands through Exponential enrichment (SELEX) techniques. Aptamers are evolved to have high affinity and specificity to targets; hence, they have a great potential for use in therapeutics as delivery agents and/or in treatment strategies. Aptamers can be chemically synthesized and modified in a cost-effective manner and are easy to hybridize to a variety of nano-particles and other agents which has paved a way for targeted therapy and diagnostics applications such as in breast tumors. In this review, we systematically explain different aptamer adoption approaches to therapeutic or diagnostic uses when addressing breast tumors. We summarize the current therapeutic techniques to address breast tumors including aptamer-base approaches. We discuss the next aptamer-based therapeutic and diagnostic approaches targeting breast tumors. Finally, we provide a perspective on the future of aptamer-based sensors for breast therapeutics and diagnostics. In this section, the therapeutic applications of aptamers will be discussed for the targeting therapy of breast cancer.

Molecular epidemiology and carbapenem resistance of Pseudomonas aeruginosa isolated from patients with burns.

OBJECTIVE: The aim of this study was to investigate the molecular epidemiology and carbapenem resistance mechanisms of Pseudomonas aeruginosa isolated from patients with burns in Azerbaijan, Iran. METHOD: Pseudomonas aeruginosa was isolated from 38 patients with burns. Disk diffusion and agar dilution methods were used to determine antibiotic susceptibility patterns. The overproduction of AmpC ß-lactamase and efflux pumps were detected by phenotypic methods. The presence of carbapenemase-encoding genes was detected by multiplex polymerase chain reaction (PCR). Expression of the OprD gene and MexAB efflux pumps were also evaluated with real-time PCR. Random amplified polymorphic DNA typing (RAPD-PCR) was used for genotyping of carbapenem-resistant Pseudomonas aeruginosa (CRPA). RESULTS: Minimum inhibitory concentration (MIC) assays demonstrated high levels of resistance to all classes of antibiotics except colistin and polymyxin B. The initial screening by carbapenem disks indicated 24 isolates (63.15%) as CRPA. Different mechanisms of carbapenem resistance were observed, including carbapenemase production (8.4%), overexpression of AmpC (25%) and decreased expression of OprD (75%). The overexpression of MexAB efflux pumps was detected in 19 (79.1%) isolates by phenotypic assay or real-time PCR. The resistance to carbapenem was multifactorial in most cases (58.3%). The RAPD genotyping revealed different patterns with nine clusters. CONCLUSION: According to our results, the prevalence of CRPA is at an alarming level. Our results did not demonstrate an epidemic clone. The most common mechanism of carbapenem resistance was decreased expression of OprD. Therefore, we suggest a reconsideration in the management of CRPA infections of patients in our burn care hospital in Azerbaijan, Iran.

Targeted combined therapy in 2D and 3D cultured MCF-7 cells using metformin and erlotinib-loaded mesoporous silica magnetic nanoparticles.

AIM: This research aims to develop potential therapeutic nanostructures (NSs) encapsulating metformin (MET) and erlotinib (ER) for combinational therapy in breast cancer. METHODS: The ER and MET, both were loaded on mesoporous silica magnetic nanoparticles conjugated with polyethylene glycol and methotrexate to achieve targeted NSs. The developed NSs were characterised using SEM, DLS, and FTIR. Afterward, MTT, Trypan blue, and DNA extraction assays were operated for biological evaluations in the 2D and 3D MCF-7 cells. RESULTS: Physicochemical approaches indicated the mean diameter of 69.4 nm ± 9.5 (PDI = 0.64), and neutral charge (2 mv) for the developed NSs. MET and ER-loaded NSs exhibited 62.56% ± 4.41 and 67.73% ± 3.03 drug release amount in pH = 5.4, respectively. MTT assay revealed that ER- and MET-loaded NSs had less metabolic activity (≈ 20%) in comparison with non-targeted NSs. CONCLUSION: Overall, our combined ER and MET-loaded targeted NSs result in a synergistic inhibitory impact on MCF-7 cells.

Piroxicam cocrystals with phenolic coformers: preparation, characterization, and dissolution properties.

This study explores the preparation and investigation of dissolution properties of piroxicam cocrystals. Differential scanning calorimetry (DSC) was used to determine the capability of resorcinol (RES), methylparaben (MPB), and vanillin (VAN) to form cocrystals with piroxicam (PRX). Generation of cocrystals was attempted by liquid assisted grinding and slurry methods. Cocrystals were characterized by thermal methods, powder X-ray diffraction, and Fourier-transform infrared spectroscopy. Apparent solubility, intrinsic dissolution rate (IDR), and powder dissolution profile of cocrystals were compared with anhydrous piroxicam, piroxicam monohydrate (PRXMH), and previously reported piroxicam-succinic acid cocrystal. Contact angles and particle sizes of the studied solids were also measured. Based on the DSC screening results, we prepared and characterized PRX-RES and PRX-MPB cocrystals. Interestingly, the cocrystals not only failed to improve apparent solubility and IDR of PRX but also showed lower values than PRX that were attributed to induction of phase transformation of PRX to PRXMH. In contrary, cocrystals performed better than PRX in powder dissolution studies. The higher dissolution rates of cocrystals were explained by improved wettability and reduced sizes. This study has highlighted the complexity of solid state properties of cocrystals and has provided new evidence for the in-solution stability issues of cocrystals.

Stable transformation of Spirulina (Arthrospira) platensis: a promising microalga for production of edible vaccines.

The planktonic blue-green microalga Spirulina (Arthrospira) platensis possesses important features (e.g., high protein and vital lipids contents as well as essential vitamins) and can be consumed by humans and animals. Accordingly, this microalga gained growing attention as a new platform for producing edible-based pharmaceutical proteins. However, there are limited successful strategies for the transformation of S. platensis, in part because of an efficient expression of strong endonucleases in its cytoplasm. In the current work, as a pilot step for the expression of therapeutic proteins, an Agrobacterium-based system was established to transfer gfp:gus and hygromycin resistance (hygr) genes into the genome of S. platensis. The presence of acetosyringone in the transfection medium significantly reduced the transformation efficiency. The PCR and real-time RT-PCR data confirmed the successful integration and transcription of the genes. Flow cytometry and ß-glucuronidase (GUS) activity experiments confirmed the successful production of GFP and the enzyme. Moreover, the western blot analysis showed a ~ 90 kDa band in the transformed cells, indicating the successful production of the GFP:GUS protein. Three months after the transformation, the gene expression stability was validated by histochemical, flow cytometry, and hygromycin B resistance analyses.

Feasibility of electrospray deposition for rapid screening of the cocrystal formation and single step, continuous production of pharmaceutical nanococrystals.

OBJECTIVES: This study employed electrospray deposition (ESD) for simultaneous synthesis and particle engineering of cocrystals. SIGNIFICANCE: Exploring new methods for the efficient production of cocrystals with desired particle properties is an essential demand. METHODS: The possibility of cocrystal formation by ESD was examined for indomethacin-saccharin, indomethacin-nicotinamide, naproxen-nicotinamide, and naproxen-iso-nicotinamide cocrystals. Solutions of the drug and coformer at stoichiometric ratios were sprayed to a high electric field which caused rapid evaporation of the solvent and the formation of fine particles. The phase purity, size, and morphology of products were compared with reference cocrystals. Experiments were performed to evaluate the effects of stoichiometric ratio, concentration and solvent type on the cocrystal formation. Physical stability and dissolution properties of the electrosprayed cocrystals were also compared with reference cocrystals. RESULTS: ESD was found to be an efficient and rapid method to produce cocrystals for all studied systems other than indomethacin-nicotinamide. Pure cocrystals only formed at a specific drug:coformer ratio. The solvent type has a weak effect on the cocrystal formation and morphology. Electrosprayed cocrystals exhibited nano to micrometer sizes with distinct morphologies with comparable physical stability with reference cocrystals. Nanococrystals of indomethacin-saccharin with a mean size of 219 nm displayed a threefold higher dissolution rate than solvent evaporated cocrystal. CONCLUSION: ESD successfully was utilized to produce pure cocrystals of poorly soluble drugs with different morphologies and sizes ranging from nano to micrometer sizes in one step. This study highlighted the usefulness of ESD for simultaneous preparation and particle engineering of pharmaceutical cocrystals.

Preparation, Physicochemical Characterization and Anti-fungal Evaluation of Nystatin-Loaded PLGA-Glucosamine Nanoparticles.

PURPOSE: Nystatin loaded PLGA and PLGA-Glucosamine nanoparticles were formulated. PLGA were functionalized with Glucosamine (PLGA-GlcN) to enhance the adhesion of nanoparticles to Candida Albicans (C.albicans) cell walls. METHOD: Quasi-emulsion solvent diffusion method was employed using PLGA and PLGA-GlcN with various drug-polymer ratios for the preparation of nanoparticles. The nanoparticles were evaluated for size, zeta potential, polydispersity index, drug crystallinity, loading efficiency and release properties. DSC, SEM, XRPD, 1H-NMR, and FT-IR were performed to analyze the physicochemical properties of the nanoparticles. Antifungal activity of the nanoparticles was evaluated by determination of MICs against C.albicans. RESULTS: The spectra of 1H-NMR and FT-IR analysis ensured GlcN functionalization on PLGA nanoparticles. SEM characterization confirmed that particles were in the nanosize range and the particle size for PLGA and PLGA-GlcN nanoparticles were in the range of 108.63 ± 4.5 to 168.8 ± 5.65 nm and 208.76 ± 16.85 nm, respectively. DSC and XRPD analysis ensured reduction of the drug crystallinity in the nanoparticles. PLGA-GlcN nanoparticles exhibit higher antifungal activity than PLGA nanoparticles. CONCLUSION: PLGA-GlcN nanoparticles showed more antifungal activity with appropriate physicochemical properties than pure Nystatin and PLGA nanoparticles.

Micro-porous surfaces in controlled drug delivery systems: design and evaluation of diltiazem hydrochloride controlled porosity osmotic pump using non-ionic surfactants as pore-former.

The major problem associated with conventional drug delivery systems is unpredictable plasma concentrations. The aim of this study was to design a controlled porosity osmotic pump (CPOP) of diltiazem hydrochloride to deliver the drug in a controlled manner. CPOP tablets were prepared by incorporation of drug in the core and subsequent coating with cellulose acetate as semi-permeable membrane. Non-ionic surfactants were applied as pore-formers as well. The effect of pore-formers concentration on the in vitro release of diltiazem was also studied. The formulations were compared based on four comparative parameters, namely, total drug released after 24 h (D24 h), lag-time (tL), squared correlation coefficient of zero order equation (RSQzero) and mean percent deviation from zero order kinetic (MPDzero). Results of scanning electron microscopy studies exhibited formation of pores in the membrane from where the drug release occurred. It was revealed that drug release rate was directly proportional to the concentration of the pore-formers. The value of D24 h in the formulations containing Tween 80 (10%) and Brij 35 (5%) were found to be more than 94.9%, and drug release followed zero order kinetic (RSQzero > 0.99 and MPDzero < 8%) with acceptable tL (lower than 1 h).

Niosomes containing paclitaxel and gold nanoparticles with different coating agents for efficient chemo/photothermal therapy of breast cancer.

Breast cancer (BC) is one of the most common cancers in women, and chemotherapy is usually used to overcome this cancer. To improve drug delivery to cancer sites and reduce their side effects, nanocarriers such as niosomes (NIOs) are used. Moreover, a combination of other therapeutic methods like photothermal therapy (PTT) can help to enhance the chemotherapy effect. The aim of this research is the design a nanocarrier that simultaneously delivers chemotherapy and PTT agents. To achieve this goal, NIOs containing paclitaxel (PTX) as a chemotherapeutic agent and spherical gold nanoparticles (AuNPs) coated with citrate, chitosan (CS), and polyamidoamine (PAMAM) as a PTT agent were synthesized by thin hydration methods. Their physicochemical properties were determined by dynamic light scattering, UV-Vis, Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM) analysis. Cellular uptake, cell cytotoxicity, hyperthermia, and apoptosis effects of the proposed system were investigated in the MCF-7 BC cell line. The cellular uptake of NIOs/AuNPs-PAMAM (99.21%) and NIOs/AuNPs-CS (98.93%) by MCF-7 cells was higher than that of NIOs/AuNPs (79.55%), demonstrating that surface charge plays a key role in the cellular uptake of NPs. The MTT assay showed the cell viability of 45.48% for NIOs/AuNPs/PTX, 34.24% for NIOs/AuNPs-CS/PTX, and 37.67% for NIOs/AuNPs-PAMAM/PTX after 48 h of treatment. However, the application of hyperthermia significantly decreased the viability of cells treated with NIOs/AuNPs/PTX (37.72%), NIOs/AuNPs-CS/PTX (10.49%), and NIOs/AuNPs-PAMAM/PTX (4.1%) after 48 h. The apoptosis rate was high in NIOs/AuNPs-PAMAM/PTX (53.24%) and NIOs/AuNPs-CS/PTX (55.4%) confirming the data from MTT. In conclusion, the result revealed that combined PTT with chemotherapy increased cell cytotoxicity effects against the MCF-7 cells, and the AuNPs with various coating agents affected cellular uptake and hyperthermia which can be considered for efficient BC therapy.

Effect of Silver Nanoparticles of Herbal Origin on the Compressive and Push-out Bond Strengths of Mineral Trioxide Aggregate.

Introduction: The purpose of this in vitro study was to investigate the effect of incorporating silver nanoparticles (AgNPs) of herbal origin into mineral trioxide aggregate (MTA) on the push-out bond strength (PBS) and compressive strength (CS) in simulated furcal area perforations. Materials and Methods: In this in vitro study, simulated furcal area perforations (1.3 mm in diameter and 2 mm in depth) were created in 40 extracted human lower molar teeth, which were divided into two groups (n=20): MTA alone and MTA combined with AgNPs (2% wt). Using a universal testing machine, PBS was evaluated by performing push-out tests, while CS was assessed using cylindrical specimens. The normal distribution of data was checked using the Kolmogorov-Smirnov test, and statistical analysis was performed using two-way ANOVA. Results: The CS results showed no significant difference between the MTA group at 4 and 21 days (P=0.297), but a significant difference was observed in the nanosilver/MTA group (P=0.013). However, there was no significant difference in the push-out bond strength among the study groups (P>0.05). Conclusion: The incorporation of herbal origin silver nanoparticles did not significantly affect the PBS or CS of MTA.

Electrosprayed Nanoparticles Containing Hydroalcoholic Extract of Echinacea purpurea (L.) Moench Stimulates Immune System by Increasing Inflammatory Factors in Male Wistar Rats.

Purpose: Echinacea purpurea (L.) Moench is a member of the Asteraceae family and is traditionally used mainly due to its immunostimulatory properties. Various compounds including alkylamides and chicoric acid were reported as active ingredients of E. purpurea. Here, we aimed to prepare electrosprayed nanoparticles (NPs) containing hydroalcoholic extract of E. purpurea using Eudragit RS100 (EP-Eudragit RS100 NPs) to improve the immunomodulatory effects of the extract. Methods: The EP-Eudragit RS100 NPs with the different extract:polymer ratios and solution concentrations were prepared using the electrospray technique. The size and morphology of the NPs were evaluated using dynamic light scattering (DLS) and field emission-scanning electron microscopy (FE-SEM). To evaluate the immune responses, male Wistar rats were administrated with the prepared EP-Eudragit RS100 NPs and plain extract in the final dose of 30 or 100 mg/kg. The blood samples of the animals were collected and the inflammatory factors and complete blood count (CBC) were investigated. Results: In vivo studies indicated that the plain extract and EP-Eudragit RS100 NPs (100 mg/kg) significantly increased the serum level of tumor necrosis factor-α (TNF-α) and interleukin 1-ß (IL1-ß) whereas the EP-Eudragit RS100 NPs (30 mg/kg) significantly increased the number of white blood cells (WBCs) compared to the control group. Lymphocytes' count in all groups was increased significantly compared to the control group (P<0.05) whereas other CBC parameters remained unchanged. Conclusion: The prepared EP-Eudragit RS100 NPs by electrospray technique caused significant reinforcement in the immunostimulatory effects of the extract of E. purpurea.

Biomaterial-based delivery platforms for transdermal immunotherapy.

Nowadays, immunotherapy is one of the most essential treatments for various diseases and a broad spectrum of disorders are assumed to be treated by altering the function of the immune system. For this reason, immunotherapy has attracted a great deal of attention and numerous studies on different approaches for immunotherapies have been investigated, using multiple biomaterials and carriers, from nanoparticles (NPs) to microneedles (MNs). In this review, the immunotherapy strategies, biomaterials, devices, and diseases supposed to be treated by immunotherapeutic strategies are reviewed. Several transdermal therapeutic methods, including semisolids, skin patches, chemical, and physical skin penetration enhancers, are discussed. MNs are the most frequent devices implemented in transdermal immunotherapy of cancers (e.g., melanoma, squamous cell carcinoma, cervical, and breast cancer), infectious (e.g., COVID-19), allergic and autoimmune disorders (e.g., Duchenne's muscular dystrophy and Pollinosis). The biomaterials used in transdermal immunotherapy vary in shape, size, and sensitivity to external stimuli (e.g., magnetic field, photo, redox, pH, thermal, and even multi-stimuli-responsive) were reported. Correspondingly, vesicle-based NPs, including niosomes, transferosomes, ethosomes, microemulsions, transfersomes, and exosomes, are also discussed. In addition, transdermal immunotherapy using vaccines has been reviewed for Ebola, Neisseria gonorrhoeae, Hepatitis B virus, Influenza virus, respiratory syncytial virus, Hand-foot-and-mouth disease, and Tetanus.

A correlative model to predict in vivo AUC for nanosystem drug delivery with release rate-limited absorption.

PURPOSE: Drug release from nanosystems at the sites of either absorption or effect biophase is a major determinant of its biological action. Thus, in vitro drug release is of paramount importance in gaining insight for the systems performance in vivo. METHODS: A novel in vitro in vivo correlation, IVIVC, model denoted as double reciprocal area method was presented and applied to 19 drugs from 55 nano formulations with total 336 data, gathered from literature. RESULTS: The proposed model correlated the in vitro with in vivo parameters with overall error of 12.4 ± 3.9%. Also the trained version of the model predicted the test formulations with overall error of 15.8 ± 3.7% indicating the suitability of the approach. A theoretical justification was provided for the model considering the unified classical release laws. CONCLUSION: The model does not necessitate bolus intravenous drug data and seems to be suitable for IVIVC of drugs with release rate-limited absorption.

Hollow pollen grains as scaffolding building blocks in bone tissue engineering.

Introduction: The current study, for the first time, suggests nature-made pollen grains (PGs) of Pistacia vera L. as a potential candidate for using as scaffolding building blocks with encapsulation capability of bioactive compounds, such as bone morphogenetic protein 4 (BMP4). Methods: A modified method using KOH (5%, 25ºC) was developed to produce nonallergic hollow pollen grains (HPGs), confirmed by energy dispersive X-ray (EDX) analysis, field emission scanning electron microscopy (FESEM), and DNA and protein staining techniques. The in-vitro study was conducted on human adipose-derived mesenchymal stem cells (hAD-MSCs) to investigate the applicability of HPGs as bone scaffolding building blocks. Cytocompability was evaluated by FESEM, MTT assay, and gene expression analysis of apoptotic markers (BAX and BCL2). The osteoconductive potential of HPGs was assessed by alkaline phosphatase (ALP) activity measurement and gene expression analysis of osteogenic markers (RUNX2 and osteocalcin). Results: Findings demonstrated that HPGs can be considered as biocompatible compounds increasing the metabolic activities of the cells. Further, the bioactive nature of HPGs resulted in suitable cellular adhesion properties, required for a potent scaffold. The investigation of apoptotic gene expression indicated a reduced BAX/BCL2 ratio reflecting the protective effect of HPGs on hAD-MSCs. The increased ALP activity and expression of osteogenic genes displayed the osteoconductive property of HPGs. Moreover, the incorporation of BMP4 in HPGs initiated a synergistic effect on osteoblast maturation. Conclusion: Owing to the unique compositional and surface nanotopographical features of the Pistacia vera L. HPG, this microscale architecture provides a favorable microenvironment for the bottom-up remodeling of bone.

Synthesis and biological impacts of pollen shells/Fe3O4 nanoparticles composites on human MG-63 osteosarcoma cells.

INTRODUCTION: Cell-adhesive surfaces play a pivotal role in biomedical engineering, as most biological reactions take place on surfaces. Pollen shell (PSh) ofPistacia vera L., as a new medical device, has previously been reported to cause cytotoxicity and apoptosis in MG-63 bone cancer cells. METHODS: Iron oxide nanoparticles (Fe3O4NPs) were synthesized and their reaction to PShs was gauged at different concentrations, and then characterized using field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy, energy dispersion X-ray spectrometer, X-ray diffraction spectra, dynamic light scattering, and vibrating sample magnetometer. Then, the biological impacts of PShs/Fe3O4NPs composites on MG-63 cells were investigated in-vitro using MTT assay, quantitative polymerase chain reaction (qPCR), Annexin V/propidium iodide, FESEM, and DAPI staining. RESULTS: Fe3O4NPs with a size range of 24-40 nm and a zeta potential value of -37.4 mV were successfully assembled on the PShs. The viability of MG-63 cells was significantly decreased when cultured on the magnetic PShs as compared to non-magnetic PShs, in Fe3O4 concentration and time-dependent manner. In contrast, magnetic PShs had a positive effect on the viability of normal human bone marrow-derived mesenchymal stem cells (hBM-MSCs). The analysis of apoptosis-related genes in cancer cells revealed that loading Fe3O4NPs on PShs increased expression of BAX/BCL2 and caspase-3 genes. The increased apoptotic activity of combined PShs/Fe3O4NPs was further confirmed by flow cytometric measurement, morphological analysis, and DAPI staining. CONCLUSION: The incorporation of Fe3O4NPs into PShs could effectively increase anticancer effects on MG-63 cells via the mitochondria-mediated apoptosis pathway, evident by upregulation of BAX/BCL2 ratio and caspase-3.

Engineered nanoparticles as emerging gene/drug delivery systems targeting the nuclear factor-κB protein and related signaling pathways in cancer.

The transcription factor nuclear factor-κB (NF-κB) is a critical regulator of the immune response, inflammation, cell growth, and survival. Canonical and non-canonical pathways, two NF-κB pathways, are activated through diverse stimulators and receptors. NF-κB activity is dysregulated in various inflammation-related diseases and cancers. It was found that the persistent NF-κB activity has a major role in proliferation, apoptosis inhibition, metastasis, and cell cycle disruption in cancer cells and also the survival of cancer stem cells (CSCs) within the tumors. Therefore, suppression of the NF-κB pathway could be a promising therapeutic target for cancer therapy. Different biological inhibitors (e.g., peptides, small molecules, antisense oligonucleotides (ASOs), and antibodies (Abs)) have been demonstrated to inhibit the NF-κB pathway. Low stability in the circulation system, weak availability, and poor cellular uptake of some inhibitors limit their therapeutic applications. To address these drawbacks nanocarrier systems are often formulated and applied in drug delivery as an effective therapeutic approach. Targeted nanosystems (i.e., small molecules, peptides, Abs and Aptamers (Aps) conjugated nanocarriers), as well as smart responsive nanocarriers, can improve the efficiency of therapeutics while reducing the off-target toxicity. This review describes the NF-κB signaling pathways and mechanisms of their over-activation in tumor initiation and progression. The NF-κB inhibitors and their clinical applications are also discussed. It also overviews different nanocarriers used as robust vehicles for the delivery of NF-κB inhibitors and anti-tumor agents to improve the bioavailability of drugs and selective targeting of cancer cells to repress NF-κB activity in tumor cells.

Nanomaterials and Stem Cell Differentiation Potential: An Overview of Biological Aspects and Biomedical Efficacy.

Nanoparticles (NPs), due to their medical applications, are widely used. Accordingly, the use of mesenchymal stem cells is one of the most important alternatives in the tissue engineering field. NPs play effective roles in stem cells proliferation and differentiation. The combination of NPs and tissue regeneration by stem cells has created a new therapeutic approach towards humanity. Of note, the physicochemical properties of NPs determine their biological function. Interestingly, various mechanisms such as modulation of signaling pathways and generation of reactive oxygen species, are involved in NPs-induced cellular proliferation and differentiation. This review summarized the types of nanomaterials effective on stem cell differentiation, the physicochemical features, biomedical application of these materials and the relationship between nanomaterials and environment.