RESUMEN
An effective chemical way to optimize the oxygen electrocatalyst and Li-O2 electrode functionalities of metal oxide can be developed by the control of chemical bond nature with the surface anchoring of highly oxidized selenate (SeO4 2- ) clusters. The bond competition between (Se6+ -O) and (Mn-O) bonds is quite effective in stabilizing Jahn-Teller-active Mn3+ state and in increasing oxygen electron density of α-MnO2 nanowire (NW). The selenate-anchored α-MnO2 NW shows excellent oxygen electrocatalytic activity and electrode performance for Li-O2 batteries, which is due to the improved charge transfer kinetics and reversible formation/decomposition of Li2 O2 . The present study underscores that the surface anchoring of highly oxidized cluster can provide a facile, effective way of improving the oxygen electrocatalyst and electrochemical performances of nanostructured metal oxide in Li-O2 cells.
RESUMEN
Development of high performance electrode materials for energy storage is one of the most important issues for our future society. However, a lack of clear analytical views limits critical understanding of electrode materials. This review covers useful analytical work using X-ray diffraction, X-ray absorption spectroscopy, microscopy and neutron diffraction for ion storage systems. The in situ observation facilitates comprehending real-time ion storage behaviour while the ion storage system is operating, which help us to understand detailed physical and chemical properties. We will discuss how the tools have been used to reveal detailed reaction mechanisms and underlying properties of electrode materials.
RESUMEN
Transition-metal oxides are promising anode materials for sodium ion batteries (SIBs) and have attracted a great deal of attention because of their natural abundance and high theoretical capacities. However, they suffer from low conductivity and large volumetric/structural variation during sodiation/desodiation processes, leading to unsatisfactory cycling stability and poor rate capability. This study proposes a novel conversion reaction using CoSnO3 (CSO) nanocubes uniformly wrapped in graphene nanosheets, which are fabricated using a wet-chemical strategy followed by low-temperature heat treatment. This optimized composite exhibits durable cyclability and high rate capability, which can be attributed to the strong interaction between reduced graphene oxide and CSO through its surface oxygen moieties. It develops a facile conversion reaction route, thereby leading to SnO2 formation during charging. This interactive phenomenon further contributes to improving the reaction kinetics and restraining the volume expansion during cycling. This study may provide a facile approach for addressing irreversible conversion of high-capacity oxide materials toward advanced SIBs.
RESUMEN
Hitherto, most research has primarily focused on improving the UV sensor efficiency via surface treatments and by stimulating the ZnO nanorod (ZNR) surface Schottky barriers. However, to the best of our knowledge, no study has yet probed the intrinsic crystal defect generation and its effects on UV sensor efficiency. In this study, we undertake this task by fabricating an intrinsic defect-prone hydrothermally grown ZNRs (S1), Ga-doped ZNRs (S2), and defect-free microwave-assisted grown ZNRs (S3). The defect states were recognized by studying X-ray diffraction and photoluminescence characteristics. The large number of crystal defects in S1 and S2 had two pronged disadvantages. (1) Most of the UV light was absorbed by the defect traps and the e-h pair generation was compromised. (2) Mobility was directly affected by the carrier-carrier scattering and phonon scattering processes. Hence, the overall UV sensor efficiency was compromised based on the defect-induced mobility-response model. Considering the facts, defect-free S3 exhibited the best UV sensor performance with the highest on/off ratio, the least impulse response time, the highest recombination time, and highest gain-induced responsivity to 368 nm UV light, which was desired of an efficient passive metal oxide-based UV sensor. Our results were compared with the recently published results.
RESUMEN
The development of next-generation energy-storage devices with high power, high energy density, and safety is critical for the success of large-scale energy-storage systems (ESSs), such as electric vehicles. Rechargeable sodium-oxygen (Na-O2 ) batteries offer a new and promising opportunity for low-cost, high-energy-density, and relatively efficient electrochemical systems. Although the specific energy density of the Na-O2 battery is lower than that of the lithium-oxygen (Li-O2 ) battery, the abundance and low cost of sodium resources offer major advantages for its practical application in the near future. However, little has so far been reported regarding the cell chemistry, to explain the rate-limiting parameters and the corresponding low round-trip efficiency and cycle degradation. Consequently, an elucidation of the reaction mechanism is needed for both lithium-oxygen and sodium-oxygen cells. An in-depth understanding of the differences and similarities between Li-O2 and Na-O2 battery systems, in terms of thermodynamics and a structural viewpoint, will be meaningful to promote the development of advanced metal-oxygen batteries. State-of-the-art battery design principles for high-energy-density lithium-oxygen and sodium-oxygen batteries are thus reviewed in depth here. Major drawbacks, reaction mechanisms, and recent strategies to improve performance are also summarized.
RESUMEN
A synergistic approach for advanced cathode materials is proposed. Sodium manganese oxide with a layered-tunnel hybrid structure was designed, synthesized, and subsequently investigated. The layered-tunnel hybrid structure provides fast Na ion diffusivity and high structural stability thanks to the tunnel phase, enabling high rate capability and greatly improved cycling stability compared to that of the pure P2 layered phase while retaining the high specific capacity of the P2 layered phase. The hybrid structure provided a decent discharge capacity of 133.4 mAh g-1 even at 8 C, which exceeds the reported best rate capability for Mn-based cathodes. It also displayed an impressive cycling stability, maintaining 83.3 mAh g-1 after 700 cycles at 10 C. Theoretical calculation and the potentiostatic intermittent titration technique (PITT) demonstrated that this hybrid structure helps enhance Na ion diffusivity during charge and discharge, attaining, as a result, an unprecendented electrochemical performance.